Bug#585556: full dmesg output from boot
 

Hi
here full dmesg log early after boot.

Bug#585556: full dmesg output from boot
 

shutdown machine
remove the DVD-RW devices data plug and power plug
restart the machine
reply with new dmesg


[ 1.324944] handlers:
[ 1.324977] [<ffffffffa00d384e>] (piix_interrupt+0x0/0x192 [ata_piix])
[ 1.325076] Disabling IRQ #5
[ 1.347126] ata1.00: ATAPI: DVD-RW IDE1108, VER B018, max UDMA/66
[ 1.347150] ata1.00: limited to UDMA/33 due to 40-wire cable
[ 1.352539] ata3.01: ATA-7: SAMSUNG HD161HJ, JF100-19, max UDMA7
[ 1.352542] ata3.01: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.352677] ata4.00: ATA-8: ST3500412AS, CC32, max UDMA/133
[ 1.352680] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.360583] ata3.01: configured for UDMA/133
[ 1.360627] ata1.00: configured for UDMA/33
[ 1.368445] ata4.00: configured for UDMA/133
[ 1.924066] scsi 0:0:0:0: CD-ROM DVDRW IDE1108 B018 PQ: 0 ANSI: 5
[ 1.924414] scsi 2:0:1:0: Direct-Access ATA SAMSUNG HD161HJ JF10 PQ: 0 ANSI: 5
[ 1.924630] scsi 3:0:0:0: Direct-Access ATA ST3500412AS CC32 PQ: 0 ANSI: 5
[ 1.940555] sd 2:0:1:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.940604] sd 2:0:1:0: [sda] Write Protect is off
[ 1.940607] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 1.940627] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.940759] sda:
[ 1.940940] sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.940986] sd 3:0:0:0: [sdb] Write Protect is off
[ 1.940988] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.941009] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.941121] sdb: sda1 sda2 sda3 < sda5 sda6 sdb1 sdb2 < sda7 sdb5 sdb6 >
[ 1.989456] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 1.992236] sda8 sda9 >
[ 2.017576] sd 2:0:1:0: [sda] Attached SCSI disk
[ 32.816059] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 32.816109] sr 0:0:0:0: CDB: Mode Sense(10): 5a 00 2a 00 00 00 00 00 80 00
[ 32.816127] ata1.00: cmd a0/01:00:00:80:00/00:00:00:00:00/a0 tag 0 dma 16512 in
[ 32.816130] res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 32.816217] ata1.00: status: { DRDY }
[ 37.856021] ata1: link is slow to respond, please be patient (ready=0)
[ 42.840023] ata1: device not ready (errno=-16), forcing hardreset
[ 42.840032] ata1: soft resetting link
[ 43.012216] ata1.00: configured for UDMA/33
[ 43.324053] ata1: EH complete
[ 73.816050] ata1.00: limiting speed to UDMA/25:PIO4
[ 73.816056] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 73.816101] sr 0:0:0:0: CDB: Mode Sense(10): 5a 00 2a 00 00 00 00 00 80 00
[ 73.816118] ata1.00: cmd a0/01:00:00:80:00/00:00:00:00:00/a0 tag 0 dma 16512 in
[ 73.816120] res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 73.816207] ata1.00: status: { DRDY }
[ 78.856026] ata1: link is slow to respond, please be patient (ready=0)
[ 83.840022] ata1: device not ready (errno=-16), forcing hardreset
[ 83.840031] ata1: soft resetting link
[ 84.020215] ata1.00: configured for UDMA/25
[ 84.324054] ata1: EH complete
[ 114.816047] ata1.00: limiting speed to PIO4
[ 114.816052] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 114.816098] sr 0:0:0:0: CDB: Mode Sense(10): 5a 00 2a 00 00 00 00 00 80 00
[ 114.816114] ata1.00: cmd a0/01:00:00:80:00/00:00:00:00:00/a0 tag 0 dma 16512 in
[ 114.816116] res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 114.816204] ata1.00: status: { DRDY }
[ 119.856027] ata1: link is slow to respond, please be patient (ready=0)
[ 124.840023] ata1: device not ready (errno=-16), forcing hardreset
[ 124.840032] ata1: soft resetting link
[ 125.012216] ata1.00: configured for PIO4
[ 125.324053] ata1: EH complete
[ 125.524047] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 125.524052] Uniform CD-ROM driver Revision: 3.20
[ 125.524198] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 125.530066] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 125.530386] sd 2:0:1:0: Attached scsi generic sg1 type 0
[ 125.530699] sd 3:0:0:0: Attached scsi generic sg2 type 0


--- On Fri, 6/11/10, jeanseb <jeanseb.valette@free.fr> wrote:

> From: jeanseb <jeanseb.valette@free.fr>
> Subject: Bug#585556: full dmesg output from boot
> To: 585556@bugs.debian.org
> Date: Friday, June 11, 2010, 4:27 PM
> Hi
> here full dmesg log early after boot.






--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 918772.23850.qm@web35603.mail.mud.yahoo.com">http://lists.debian.org/918772.23850.qm@web35603.mail.mud.yahoo.com