FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 06-06-2010, 10:33 PM
"Thomas Jollans"
 
Default Bug#584830: linux-image-2.6.32-5-amd64: USB 3.0 / xhci prevents suspend

Package: linux-2.6
Version: 2.6.32-15
Severity: normal

My motherboard includes a USB 3.0 controller, handled by the xhci
module. When the xhci module is loaded, the system fails to suspend with
the following log messages:

[ 458.601622] pm_op(): usb_dev_suspend+0x0/0xa [usbcore] returns -2
[ 458.601624] PM: Device usb2 failed to suspend: error -2

When I unload the xhci module, the system suspends just fine, without
this message.

Relevant `lsusb -v` and dmesg output parts follow:

# lsusb -v
[ ... ]
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 3.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 3
bMaxPacketSize0 9
idVendor 0x1d6b Linux Foundation
idProduct 0x0003 3.0 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.32-5-amd64 xhci_hcd
iProduct 2 xHCI Host Controller
iSerial 1 0000:04:00.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 4
wHubCharacteristic 0x0009
Per-port power switching
Per-port overcurrent protection
TT think time 8 FS bits
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled

# pm-suspend
# dmesg
[ ... ]
[ 457.630373] PM: Syncing filesystems ... done.
[ 457.744997] PM: Preparing system for mem sleep
[ 457.747218] Freezing user space processes ... (elapsed 0.00 seconds) done.
[ 457.747607] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 457.747642] PM: Entering mem sleep
[ 457.747653] Suspending console(s) (use no_console_suspend to debug)
[ 457.812103] sd 3:0:0:0: [sdb] Synchronizing SCSI cache
[ 457.812321] sd 3:0:0:0: [sdb] Stopping disk
[ 458.225455] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[ 458.240627] sd 2:0:0:0: [sda] Stopping disk
[ 458.601622] pm_op(): usb_dev_suspend+0x0/0xa [usbcore] returns -2
[ 458.601624] PM: Device usb2 failed to suspend: error -2
[ 458.601626] PM: Some devices failed to suspend
[ 458.822063] sd 2:0:0:0: [sda] Starting disk
[ 460.874188] sd 3:0:0:0: [sdb] Starting disk
[ 465.811159] PM: Finishing wakeup.
[ 465.811160] Restarting tasks ... done.

# modprobe -r xhci
# pm-suspend

--

Suspend then works without a problem. dmesg output is, as one would expect,
full of what looks to me like routine device suspend, later resume, log
messages.

The USB 3.0 controller doesn't appear in the USB device list reportbug added below since the module has been unloaded. It appears in the PCI device list, though, in case that helps.


-- Package-specific info:
** Version:
Linux version 2.6.32-5-amd64 (Debian 2.6.32-15) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-1) ) #1 SMP Tue Jun 1 04:34:03 UTC 2010

** Command line:
BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=UUID=d6aacc5e-b385-440f-a972-523ec3e3945d ro quiet

** Tainted: P (1)
* Proprietary module has been loaded.

** Kernel log:
[ removed, irrelevant. See above for relevant log parts. ]

** Model information
sys_vendor: Gigabyte Technology Co., Ltd.
product_name: GA-770TA-UD3
product_version:
chassis_vendor: Gigabyte Technology Co., Ltd.
chassis_version:
bios_vendor: Award Software International, Inc.
bios_version: F2
board_vendor: Gigabyte Technology Co., Ltd.
board_name: GA-770TA-UD3
board_version: x.x

** Loaded modules:
Module Size Used by
sco 7209 2
ppdev 5030 0
lp 7462 0
bridge 39598 0
stp 1440 1 bridge
bnep 9427 2
rfcomm 29581 0
l2cap 24736 6 bnep,rfcomm
bluetooth 41827 6 sco,bnep,rfcomm,l2cap
rfkill 13044 2 bluetooth
powernow_k8 10978 0
cpufreq_conservative 5162 0
cpufreq_userspace 1992 0
cpufreq_powersave 902 0
cpufreq_stats 2659 0
vboxnetadp 4193 0
vboxnetflt 12415 0
vboxdrv 1723686 2 vboxnetadp,vboxnetflt
binfmt_misc 6431 1
fuse 50190 1
ext4 285611 1
jbd2 66919 1 ext4
crc16 1319 2 l2cap,ext4
ext2 52969 1
firewire_sbp2 11514 0
loop 11783 0
isl6421 1388 1
cx24123 11111 1
snd_hda_codec_atihdmi 2251 1
cx88_dvb 16516 0
cx88_vp3054_i2c 1636 1 cx88_dvb
videobuf_dvb 4130 1 cx88_dvb
snd_hda_codec_realtek 235506 1
snd_hda_intel 19907 2
snd_usb_audio 64070 2
dvb_core 74570 2 cx88_dvb,videobuf_dvb
snd_hda_codec 54244 3 snd_hda_codec_atihdmi,snd_hda_codec_realtek,snd_hd a_intel
snd_usb_lib 13928 1 snd_usb_audio
snd_hwdep 5380 2 snd_usb_audio,snd_hda_codec
cx88_alsa 7843 1
cx8802 11189 1 cx88_dvb
cx8800 24967 0
snd_seq_midi 4400 0
snd_pcm_oss 32591 0
snd_rawmidi 15515 2 snd_usb_lib,snd_seq_midi
snd_mixer_oss 12606 1 snd_pcm_oss
snd_seq_midi_event 4628 1 snd_seq_midi
snd_pcm 60471 5 snd_hda_intel,snd_usb_audio,snd_hda_codec,cx88_als a,snd_pcm_oss
snd_seq 42881 2 snd_seq_midi,snd_seq_midi_event
snd_timer 15582 2 snd_pcm,snd_seq
cx88xx 65064 4 cx88_dvb,cx88_alsa,cx8802,cx8800
snd_seq_device 4493 3 snd_seq_midi,snd_rawmidi,snd_seq
v4l2_common 11720 2 cx8800,cx88xx
ir_common 24271 1 cx88xx
usbhid 33260 0
videodev 29993 3 cx8800,cx88xx,v4l2_common
snd 46446 23 snd_hda_codec_realtek,snd_hda_intel,snd_usb_audio, snd_hda_codec,snd_hwdep,cx88_alsa,snd_pcm_oss,snd_ rawmidi,snd_mixer_oss,snd_pcm,snd_seq,snd_timer,sn d_seq_device
soundcore 4598 1 snd
v4l1_compat 11442 1 videodev
i2c_algo_bit 4225 2 cx88_vp3054_i2c,cx88xx
hid 62825 1 usbhid
v4l2_compat_ioctl32 8538 1 videodev
tveeprom 12057 1 cx88xx
videobuf_dma_sg 8403 5 cx88_dvb,cx88_alsa,cx8802,cx8800,cx88xx
btcx_risc 2899 4 cx88_alsa,cx8802,cx8800,cx88xx
videobuf_core 12244 5 videobuf_dvb,cx8802,cx8800,cx88xx,videobuf_dma_sg
fglrx 2385795 31
i2c_piix4 8328 0
i2c_core 15712 10 isl6421,cx24123,cx88_vp3054_i2c,cx8800,cx88xx,v4l2 _common,videodev,i2c_algo_bit,tveeprom,i2c_piix4
snd_page_alloc 6249 2 snd_hda_intel,snd_pcm
edac_core 29261 0
edac_mce_amd 6433 0
evdev 7352 17
parport_pc 18855 1
tpm_tis 7336 0
tpm 9917 1 tpm_tis
parport 27954 3 ppdev,lp,parport_pc
pcspkr 1699 0
button 4650 0
tpm_bios 4521 1 tpm
processor 30231 1 powernow_k8
ext3 106518 2
jbd 37085 1 ext3
mbcache 5050 3 ext4,ext2,ext3
dm_mod 53754 9
usb_storage 39449 0
sg 18744 0
sr_mod 12602 0
cdrom 29415 1 sr_mod
sd_mod 29777 7
crc_t10dif 1276 1 sd_mod
ata_generic 2983 0
ohci_hcd 19212 0
firewire_ohci 19468 0
pata_jmicron 2280 0
firewire_core 36736 2 firewire_sbp2,firewire_ohci
crc_itu_t 1307 1 firewire_core
pata_atiixp 3489 0
ahci 32358 5
ehci_hcd 31039 0
r8169 28877 0
mii 3210 1 r8169
usbcore 121959 7 snd_usb_audio,snd_usb_lib,usbhid,usb_storage,ohci_ hcd,ehci_hcd
nls_base 6361 1 usbcore
libata 133520 4 ata_generic,pata_jmicron,pata_atiixp,ahci
scsi_mod 122117 6 firewire_sbp2,usb_storage,sg,sr_mod,sd_mod,libata
thermal 11674 0
thermal_sys 11942 2 processor,thermal

** PCI devices:
00:00.0 Host bridge [0600]: ATI Technologies Inc RX780/RX790 Chipset Host Bridge [1002:5957]
Subsystem: ATI Technologies Inc RX780/RX790 Chipset Host Bridge [1002:5957]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 32
Region 3: Memory at <ignored> (64-bit, non-prefetchable)
Capabilities: <access denied>

00:02.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (external gfx0 port A) [1002:5978] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: fdf00000-fdffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:06.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port C) [1002:597c] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fde00000-fdefffff
Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:07.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port D) [1002:597d] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fdc00000-fdcfffff
Prefetchable memory behind bridge: 00000000fdb00000-00000000fdbfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:09.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port E) [1002:597e] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fda00000-fdafffff
Prefetchable memory behind bridge: 00000000fd900000-00000000fd9fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:0a.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port F) [1002:597f] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fd800000-fd8fffff
Prefetchable memory behind bridge: 00000000fd600000-00000000fd6fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:11.0 SATA controller [0106]: ATI Technologies Inc SB700/SB800 SATA Controller [IDE mode] [1002:4390] (prog-if 01 [AHCI 1.0])
Subsystem: Giga-byte Technology Device [1458:b002]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at ff00 [size=8]
Region 1: I/O ports at fe00 [size=4]
Region 2: I/O ports at fd00 [size=8]
Region 3: I/O ports at fc00 [size=4]
Region 4: I/O ports at fb00 [size=16]
Region 5: Memory at fe02f000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci

00:12.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd

00:12.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd

00:12.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe02c000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd

00:13.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd

00:13.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe02a000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd

00:13.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at fe029000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd

00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 3c)
Subsystem: Giga-byte Technology Device [1458:4385]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel modules: i2c-piix4

00:14.1 IDE interface [0101]: ATI Technologies Inc SB700/SB800 IDE Controller [1002:439c] (prog-if 8a [Master SecP PriP])
Subsystem: Giga-byte Technology Device [1458:5002]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at fa00 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_atiixp
Kernel modules: ata_generic, pata_atiixp

00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383]
Subsystem: Giga-byte Technology Device [1458:a002]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin ? routed to IRQ 16
Region 0: Memory at fe024000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel

00:14.3 ISA bridge [0601]: ATI Technologies Inc SB700/SB800 LPC host controller [1002:439d]
Subsystem: ATI Technologies Inc SB700/SB800 LPC host controller [1002:439d]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=06, subordinate=06, sec-latency=64
I/O behind bridge: 00009000-00009fff
Memory behind bridge: f8000000-fcffffff
Prefetchable memory behind bridge: fd700000-fd7fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:14.5 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe028000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd

00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration [1022:1200]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>

00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map [1022:1201]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller [1022:1202]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel modules: amd64_edac_mod

00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control [1022:1203]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>

00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control [1022:1204]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV710 [Radeon HD 4550] [1002:9540] (prog-if 00 [VGA controller])
Subsystem: Giga-byte Technology Device [1458:21ae]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 31
Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at fdfe0000 (64-bit, non-prefetchable) [size=64K]
Region 4: I/O ports at ae00 [size=256]
[virtual] Expansion ROM at fdf00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: fglrx_pci
Kernel modules: radeon

01:00.1 Audio device [0403]: ATI Technologies Inc RV710/730 [1002:aa38]
Subsystem: Giga-byte Technology Device [1458:aa38]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at fdffc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel

02:00.0 SATA controller [0106]: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller [197b:2363] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:b000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 5: Memory at fdefe000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci

02:00.1 IDE interface [0101]: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller [197b:2363] (rev 03) (prog-if 85 [Master SecO PriO])
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:b000]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at ef00 [size=8]
Region 1: I/O ports at ee00 [size=4]
Region 2: I/O ports at ed00 [size=8]
Region 3: I/O ports at ec00 [size=4]
Region 4: I/O ports at eb00 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_jmicron
Kernel modules: pata_jmicron, ata_generic

03:00.0 IDE interface [0101]: Device [1b4b:91a3] (rev 11) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Giga-byte Technology Device [1458:b000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at df00 [size=8]
Region 1: I/O ports at de00 [size=4]
Region 2: I/O ports at dd00 [size=8]
Region 3: I/O ports at dc00 [size=4]
Region 4: I/O ports at db00 [size=16]
Region 5: Memory at fdcff000 (32-bit, non-prefetchable) [size=2K]
[virtual] Expansion ROM at fdb00000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel modules: ata_generic

04:00.0 USB Controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 03) (prog-if 30)
Subsystem: Giga-byte Technology Device [1458:5007]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fdafe000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel modules: xhci

05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03)
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:e000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 30
Region 0: I/O ports at be00 [size=256]
Region 2: Memory at fd6ff000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at fd6f8000 (64-bit, prefetchable) [size=16K]
[virtual] Expansion ROM at fd600000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169

06:07.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [14f1:8800] (rev 05)
Subsystem: Hauppauge computer works Inc. Nova-S-Plus DVB-S [0070:9202]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (5000ns min, 13750ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 21
Region 0: Memory at f9000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: <access denied>
Kernel driver in use: cx8800
Kernel modules: cx8800

06:07.1 Multimedia controller [0480]: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] [14f1:8801] (rev 05)
Subsystem: Hauppauge computer works Inc. Device [0070:9202]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (1000ns min, 63750ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 21
Region 0: Memory at f8000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: <access denied>
Kernel driver in use: cx88_audio
Kernel modules: cx88-alsa

06:07.2 Multimedia controller [0480]: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] [14f1:8802] (rev 05)
Subsystem: Hauppauge computer works Inc. Device [0070:9202]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (1500ns min, 22000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 21
Region 0: Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: <access denied>
Kernel driver in use: cx88-mpeg driver manager
Kernel modules: cx8802

06:07.4 Multimedia controller [0480]: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [IR Port] [14f1:8804] (rev 05)
Subsystem: Hauppauge computer works Inc. Device [0070:9202]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (1500ns min, 63750ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 3
Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: <access denied>

06:0e.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) [104c:8024] (prog-if 10 [OHCI])
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:1000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fcfff000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at fcff8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
Kernel modules: firewire-ohci


** USB devices:
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 003: ID 08bb:2900 Texas Instruments Japan PCM2900 Audio Codec
Bus 007 Device 002: ID 058f:9254 Alcor Micro Corp. Hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 1307:0330 Transcend Information, Inc.
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 046d:c046 Logitech, Inc. RX1000 Laser Mouse
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.32-5-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-2.6.32-5-amd64 depends on:
ii debconf [debconf-2.0] 1.5.32 Debian configuration management sy
ii initramfs-tools [linux-initr 0.95.1 tools for generating an initramfs
ii linux-base 2.6.32-15 Linux image base package
ii module-init-tools 3.12~pre2-3 tools for managing Linux kernel mo

Versions of packages linux-image-2.6.32-5-amd64 recommends:
ii firmware-linux-free 2.6.32-15 Binary firmware for various driver

Versions of packages linux-image-2.6.32-5-amd64 suggests:
ii grub 0.97-61 GRand Unified Bootloader (dummy pa
pn linux-doc-2.6.32 <none> (no description available)

Versions of packages linux-image-2.6.32-5-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)

-- debconf information excluded



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20100606223346.5240.53342.reportbug@krikkit.jollyb ox.de">http://lists.debian.org/20100606223346.5240.53342.reportbug@krikkit.jollyb ox.de
 
Old 06-07-2010, 01:18 AM
Ben Hutchings
 
Default Bug#584830: linux-image-2.6.32-5-amd64: USB 3.0 / xhci prevents suspend

On Mon, 2010-06-07 at 00:33 +0200, Thomas Jollans wrote:
> Package: linux-2.6
> Version: 2.6.32-15
> Severity: normal
>
> My motherboard includes a USB 3.0 controller, handled by the xhci
> module. When the xhci module is loaded, the system fails to suspend with
> the following log messages:
>
> [ 458.601622] pm_op(): usb_dev_suspend+0x0/0xa [usbcore] returns -2
> [ 458.601624] PM: Device usb2 failed to suspend: error -2
>
> When I unload the xhci module, the system suspends just fine, without
> this message.

Sarah, any idea what's going on here? Debian version 2.6.32-15 is
closely based on stable version 2.6.32.14. I didn't see any later
changes to xhci that look related to PM.

Ben.

> Relevant `lsusb -v` and dmesg output parts follow:
>
> # lsusb -v
> [ ... ]
> Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 3.00
> bDeviceClass 9 Hub
> bDeviceSubClass 0 Unused
> bDeviceProtocol 3
> bMaxPacketSize0 9
> idVendor 0x1d6b Linux Foundation
> idProduct 0x0003 3.0 root hub
> bcdDevice 2.06
> iManufacturer 3 Linux 2.6.32-5-amd64 xhci_hcd
> iProduct 2 xHCI Host Controller
> iSerial 1 0000:04:00.0
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 25
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0xe0
> Self Powered
> Remote Wakeup
> MaxPower 0mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 9 Hub
> bInterfaceSubClass 0 Unused
> bInterfaceProtocol 0 Full speed (or root) hub
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0004 1x 4 bytes
> bInterval 12
> Hub Descriptor:
> bLength 9
> bDescriptorType 41
> nNbrPorts 4
> wHubCharacteristic 0x0009
> Per-port power switching
> Per-port overcurrent protection
> TT think time 8 FS bits
> bPwrOn2PwrGood 10 * 2 milli seconds
> bHubContrCurrent 0 milli Ampere
> DeviceRemovable 0x00
> PortPwrCtrlMask 0xff
> Hub Port Status:
> Port 1: 0000.0100 power
> Port 2: 0000.0100 power
> Port 3: 0000.0100 power
> Port 4: 0000.0100 power
> Device Status: 0x0003
> Self Powered
> Remote Wakeup Enabled
>
> # pm-suspend
> # dmesg
> [ ... ]
> [ 457.630373] PM: Syncing filesystems ... done.
> [ 457.744997] PM: Preparing system for mem sleep
> [ 457.747218] Freezing user space processes ... (elapsed 0.00 seconds) done.
> [ 457.747607] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
> [ 457.747642] PM: Entering mem sleep
> [ 457.747653] Suspending console(s) (use no_console_suspend to debug)
> [ 457.812103] sd 3:0:0:0: [sdb] Synchronizing SCSI cache
> [ 457.812321] sd 3:0:0:0: [sdb] Stopping disk
> [ 458.225455] sd 2:0:0:0: [sda] Synchronizing SCSI cache
> [ 458.240627] sd 2:0:0:0: [sda] Stopping disk
> [ 458.601622] pm_op(): usb_dev_suspend+0x0/0xa [usbcore] returns -2
> [ 458.601624] PM: Device usb2 failed to suspend: error -2
> [ 458.601626] PM: Some devices failed to suspend
> [ 458.822063] sd 2:0:0:0: [sda] Starting disk
> [ 460.874188] sd 3:0:0:0: [sdb] Starting disk
> [ 465.811159] PM: Finishing wakeup.
> [ 465.811160] Restarting tasks ... done.
>
> # modprobe -r xhci
> # pm-suspend
>
> --
>
> Suspend then works without a problem. dmesg output is, as one would expect,
> full of what looks to me like routine device suspend, later resume, log
> messages.
>
> The USB 3.0 controller doesn't appear in the USB device list reportbug added below since the module has been unloaded. It appears in the PCI device list, though, in case that helps.
>
>
> -- Package-specific info:
> ** Version:
> Linux version 2.6.32-5-amd64 (Debian 2.6.32-15) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-1) ) #1 SMP Tue Jun 1 04:34:03 UTC 2010
>
> ** Command line:
> BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=UUID=d6aacc5e-b385-440f-a972-523ec3e3945d ro quiet
>
> ** Tainted: P (1)
> * Proprietary module has been loaded.
>
> ** Kernel log:
> [ removed, irrelevant. See above for relevant log parts. ]
>
> ** Model information
> sys_vendor: Gigabyte Technology Co., Ltd.
> product_name: GA-770TA-UD3
> product_version:
> chassis_vendor: Gigabyte Technology Co., Ltd.
> chassis_version:
> bios_vendor: Award Software International, Inc.
> bios_version: F2
> board_vendor: Gigabyte Technology Co., Ltd.
> board_name: GA-770TA-UD3
> board_version: x.x
>
> ** Loaded modules:
> Module Size Used by
> sco 7209 2
> ppdev 5030 0
> lp 7462 0
> bridge 39598 0
> stp 1440 1 bridge
> bnep 9427 2
> rfcomm 29581 0
> l2cap 24736 6 bnep,rfcomm
> bluetooth 41827 6 sco,bnep,rfcomm,l2cap
> rfkill 13044 2 bluetooth
> powernow_k8 10978 0
> cpufreq_conservative 5162 0
> cpufreq_userspace 1992 0
> cpufreq_powersave 902 0
> cpufreq_stats 2659 0
> vboxnetadp 4193 0
> vboxnetflt 12415 0
> vboxdrv 1723686 2 vboxnetadp,vboxnetflt
> binfmt_misc 6431 1
> fuse 50190 1
> ext4 285611 1
> jbd2 66919 1 ext4
> crc16 1319 2 l2cap,ext4
> ext2 52969 1
> firewire_sbp2 11514 0
> loop 11783 0
> isl6421 1388 1
> cx24123 11111 1
> snd_hda_codec_atihdmi 2251 1
> cx88_dvb 16516 0
> cx88_vp3054_i2c 1636 1 cx88_dvb
> videobuf_dvb 4130 1 cx88_dvb
> snd_hda_codec_realtek 235506 1
> snd_hda_intel 19907 2
> snd_usb_audio 64070 2
> dvb_core 74570 2 cx88_dvb,videobuf_dvb
> snd_hda_codec 54244 3 snd_hda_codec_atihdmi,snd_hda_codec_realtek,snd_hd a_intel
> snd_usb_lib 13928 1 snd_usb_audio
> snd_hwdep 5380 2 snd_usb_audio,snd_hda_codec
> cx88_alsa 7843 1
> cx8802 11189 1 cx88_dvb
> cx8800 24967 0
> snd_seq_midi 4400 0
> snd_pcm_oss 32591 0
> snd_rawmidi 15515 2 snd_usb_lib,snd_seq_midi
> snd_mixer_oss 12606 1 snd_pcm_oss
> snd_seq_midi_event 4628 1 snd_seq_midi
> snd_pcm 60471 5 snd_hda_intel,snd_usb_audio,snd_hda_codec,cx88_als a,snd_pcm_oss
> snd_seq 42881 2 snd_seq_midi,snd_seq_midi_event
> snd_timer 15582 2 snd_pcm,snd_seq
> cx88xx 65064 4 cx88_dvb,cx88_alsa,cx8802,cx8800
> snd_seq_device 4493 3 snd_seq_midi,snd_rawmidi,snd_seq
> v4l2_common 11720 2 cx8800,cx88xx
> ir_common 24271 1 cx88xx
> usbhid 33260 0
> videodev 29993 3 cx8800,cx88xx,v4l2_common
> snd 46446 23 snd_hda_codec_realtek,snd_hda_intel,snd_usb_audio, snd_hda_codec,snd_hwdep,cx88_alsa,snd_pcm_oss,snd_ rawmidi,snd_mixer_oss,snd_pcm,snd_seq,snd_timer,sn d_seq_device
> soundcore 4598 1 snd
> v4l1_compat 11442 1 videodev
> i2c_algo_bit 4225 2 cx88_vp3054_i2c,cx88xx
> hid 62825 1 usbhid
> v4l2_compat_ioctl32 8538 1 videodev
> tveeprom 12057 1 cx88xx
> videobuf_dma_sg 8403 5 cx88_dvb,cx88_alsa,cx8802,cx8800,cx88xx
> btcx_risc 2899 4 cx88_alsa,cx8802,cx8800,cx88xx
> videobuf_core 12244 5 videobuf_dvb,cx8802,cx8800,cx88xx,videobuf_dma_sg
> fglrx 2385795 31
> i2c_piix4 8328 0
> i2c_core 15712 10 isl6421,cx24123,cx88_vp3054_i2c,cx8800,cx88xx,v4l2 _common,videodev,i2c_algo_bit,tveeprom,i2c_piix4
> snd_page_alloc 6249 2 snd_hda_intel,snd_pcm
> edac_core 29261 0
> edac_mce_amd 6433 0
> evdev 7352 17
> parport_pc 18855 1
> tpm_tis 7336 0
> tpm 9917 1 tpm_tis
> parport 27954 3 ppdev,lp,parport_pc
> pcspkr 1699 0
> button 4650 0
> tpm_bios 4521 1 tpm
> processor 30231 1 powernow_k8
> ext3 106518 2
> jbd 37085 1 ext3
> mbcache 5050 3 ext4,ext2,ext3
> dm_mod 53754 9
> usb_storage 39449 0
> sg 18744 0
> sr_mod 12602 0
> cdrom 29415 1 sr_mod
> sd_mod 29777 7
> crc_t10dif 1276 1 sd_mod
> ata_generic 2983 0
> ohci_hcd 19212 0
> firewire_ohci 19468 0
> pata_jmicron 2280 0
> firewire_core 36736 2 firewire_sbp2,firewire_ohci
> crc_itu_t 1307 1 firewire_core
> pata_atiixp 3489 0
> ahci 32358 5
> ehci_hcd 31039 0
> r8169 28877 0
> mii 3210 1 r8169
> usbcore 121959 7 snd_usb_audio,snd_usb_lib,usbhid,usb_storage,ohci_ hcd,ehci_hcd
> nls_base 6361 1 usbcore
> libata 133520 4 ata_generic,pata_jmicron,pata_atiixp,ahci
> scsi_mod 122117 6 firewire_sbp2,usb_storage,sg,sr_mod,sd_mod,libata
> thermal 11674 0
> thermal_sys 11942 2 processor,thermal
>
> ** PCI devices:
> 00:00.0 Host bridge [0600]: ATI Technologies Inc RX780/RX790 Chipset Host Bridge [1002:5957]
> Subsystem: ATI Technologies Inc RX780/RX790 Chipset Host Bridge [1002:5957]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
> Latency: 32
> Region 3: Memory at <ignored> (64-bit, non-prefetchable)
> Capabilities: <access denied>
>
> 00:02.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (external gfx0 port A) [1002:5978] (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
> I/O behind bridge: 0000a000-0000afff
> Memory behind bridge: fdf00000-fdffffff
> Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: <access denied>
> Kernel driver in use: pcieport
> Kernel modules: shpchp
>
> 00:06.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port C) [1002:597c] (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
> I/O behind bridge: 0000e000-0000efff
> Memory behind bridge: fde00000-fdefffff
> Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: <access denied>
> Kernel driver in use: pcieport
> Kernel modules: shpchp
>
> 00:07.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port D) [1002:597d] (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
> I/O behind bridge: 0000d000-0000dfff
> Memory behind bridge: fdc00000-fdcfffff
> Prefetchable memory behind bridge: 00000000fdb00000-00000000fdbfffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: <access denied>
> Kernel driver in use: pcieport
> Kernel modules: shpchp
>
> 00:09.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port E) [1002:597e] (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
> I/O behind bridge: 0000c000-0000cfff
> Memory behind bridge: fda00000-fdafffff
> Prefetchable memory behind bridge: 00000000fd900000-00000000fd9fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: <access denied>
> Kernel driver in use: pcieport
> Kernel modules: shpchp
>
> 00:0a.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port F) [1002:597f] (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
> I/O behind bridge: 0000b000-0000bfff
> Memory behind bridge: fd800000-fd8fffff
> Prefetchable memory behind bridge: 00000000fd600000-00000000fd6fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: <access denied>
> Kernel driver in use: pcieport
> Kernel modules: shpchp
>
> 00:11.0 SATA controller [0106]: ATI Technologies Inc SB700/SB800 SATA Controller [IDE mode] [1002:4390] (prog-if 01 [AHCI 1.0])
> Subsystem: Giga-byte Technology Device [1458:b002]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 22
> Region 0: I/O ports at ff00 [size=8]
> Region 1: I/O ports at fe00 [size=4]
> Region 2: I/O ports at fd00 [size=8]
> Region 3: I/O ports at fc00 [size=4]
> Region 4: I/O ports at fb00 [size=16]
> Region 5: Memory at fe02f000 (32-bit, non-prefetchable) [size=1K]
> Capabilities: <access denied>
> Kernel driver in use: ahci
> Kernel modules: ahci
>
> 00:12.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
> Subsystem: Giga-byte Technology Device [1458:5004]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 16
> Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=4K]
> Kernel driver in use: ohci_hcd
> Kernel modules: ohci-hcd
>
> 00:12.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
> Subsystem: Giga-byte Technology Device [1458:5004]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 16
> Region 0: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
> Kernel driver in use: ohci_hcd
> Kernel modules: ohci-hcd
>
> 00:12.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
> Subsystem: Giga-byte Technology Device [1458:5004]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 64 bytes
> Interrupt: pin B routed to IRQ 17
> Region 0: Memory at fe02c000 (32-bit, non-prefetchable) [size=256]
> Capabilities: <access denied>
> Kernel driver in use: ehci_hcd
> Kernel modules: ehci-hcd
>
> 00:13.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
> Subsystem: Giga-byte Technology Device [1458:5004]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 18
> Region 0: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
> Kernel driver in use: ohci_hcd
> Kernel modules: ohci-hcd
>
> 00:13.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
> Subsystem: Giga-byte Technology Device [1458:5004]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 18
> Region 0: Memory at fe02a000 (32-bit, non-prefetchable) [size=4K]
> Kernel driver in use: ohci_hcd
> Kernel modules: ohci-hcd
>
> 00:13.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
> Subsystem: Giga-byte Technology Device [1458:5004]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 64 bytes
> Interrupt: pin B routed to IRQ 19
> Region 0: Memory at fe029000 (32-bit, non-prefetchable) [size=256]
> Capabilities: <access denied>
> Kernel driver in use: ehci_hcd
> Kernel modules: ehci-hcd
>
> 00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 3c)
> Subsystem: Giga-byte Technology Device [1458:4385]
> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Capabilities: <access denied>
> Kernel modules: i2c-piix4
>
> 00:14.1 IDE interface [0101]: ATI Technologies Inc SB700/SB800 IDE Controller [1002:439c] (prog-if 8a [Master SecP PriP])
> Subsystem: Giga-byte Technology Device [1458:5002]
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 16
> Region 0: I/O ports at 01f0 [size=8]
> Region 1: I/O ports at 03f4 [size=1]
> Region 2: I/O ports at 0170 [size=8]
> Region 3: I/O ports at 0374 [size=1]
> Region 4: I/O ports at fa00 [size=16]
> Capabilities: <access denied>
> Kernel driver in use: pata_atiixp
> Kernel modules: ata_generic, pata_atiixp
>
> 00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383]
> Subsystem: Giga-byte Technology Device [1458:a002]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 64 bytes
> Interrupt: pin ? routed to IRQ 16
> Region 0: Memory at fe024000 (64-bit, non-prefetchable) [size=16K]
> Capabilities: <access denied>
> Kernel driver in use: HDA Intel
> Kernel modules: snd-hda-intel
>
> 00:14.3 ISA bridge [0601]: ATI Technologies Inc SB700/SB800 LPC host controller [1002:439d]
> Subsystem: ATI Technologies Inc SB700/SB800 LPC host controller [1002:439d]
> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
>
> 00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64
> Bus: primary=00, secondary=06, subordinate=06, sec-latency=64
> I/O behind bridge: 00009000-00009fff
> Memory behind bridge: f8000000-fcffffff
> Prefetchable memory behind bridge: fd700000-fd7fffff
> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>
> 00:14.5 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
> Subsystem: Giga-byte Technology Device [1458:5004]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 64 bytes
> Interrupt: pin C routed to IRQ 18
> Region 0: Memory at fe028000 (32-bit, non-prefetchable) [size=4K]
> Kernel driver in use: ohci_hcd
> Kernel modules: ohci-hcd
>
> 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration [1022:1200]
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Capabilities: <access denied>
>
> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map [1022:1201]
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>
> 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller [1022:1202]
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Kernel modules: amd64_edac_mod
>
> 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control [1022:1203]
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Capabilities: <access denied>
>
> 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control [1022:1204]
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>
> 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV710 [Radeon HD 4550] [1002:9540] (prog-if 00 [VGA controller])
> Subsystem: Giga-byte Technology Device [1458:21ae]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 31
> Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M]
> Region 2: Memory at fdfe0000 (64-bit, non-prefetchable) [size=64K]
> Region 4: I/O ports at ae00 [size=256]
> [virtual] Expansion ROM at fdf00000 [disabled] [size=128K]
> Capabilities: <access denied>
> Kernel driver in use: fglrx_pci
> Kernel modules: radeon
>
> 01:00.1 Audio device [0403]: ATI Technologies Inc RV710/730 [1002:aa38]
> Subsystem: Giga-byte Technology Device [1458:aa38]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin B routed to IRQ 19
> Region 0: Memory at fdffc000 (64-bit, non-prefetchable) [size=16K]
> Capabilities: <access denied>
> Kernel driver in use: HDA Intel
> Kernel modules: snd-hda-intel
>
> 02:00.0 SATA controller [0106]: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller [197b:2363] (rev 03) (prog-if 01 [AHCI 1.0])
> Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:b000]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 18
> Region 5: Memory at fdefe000 (32-bit, non-prefetchable) [size=8K]
> Capabilities: <access denied>
> Kernel driver in use: ahci
> Kernel modules: ahci
>
> 02:00.1 IDE interface [0101]: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller [197b:2363] (rev 03) (prog-if 85 [Master SecO PriO])
> Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:b000]
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin B routed to IRQ 19
> Region 0: I/O ports at ef00 [size=8]
> Region 1: I/O ports at ee00 [size=4]
> Region 2: I/O ports at ed00 [size=8]
> Region 3: I/O ports at ec00 [size=4]
> Region 4: I/O ports at eb00 [size=16]
> Capabilities: <access denied>
> Kernel driver in use: pata_jmicron
> Kernel modules: pata_jmicron, ata_generic
>
> 03:00.0 IDE interface [0101]: Device [1b4b:91a3] (rev 11) (prog-if 8f [Master SecP SecO PriP PriO])
> Subsystem: Giga-byte Technology Device [1458:b000]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 5
> Region 0: I/O ports at df00 [size=8]
> Region 1: I/O ports at de00 [size=4]
> Region 2: I/O ports at dd00 [size=8]
> Region 3: I/O ports at dc00 [size=4]
> Region 4: I/O ports at db00 [size=16]
> Region 5: Memory at fdcff000 (32-bit, non-prefetchable) [size=2K]
> [virtual] Expansion ROM at fdb00000 [disabled] [size=64K]
> Capabilities: <access denied>
> Kernel modules: ata_generic
>
> 04:00.0 USB Controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 03) (prog-if 30)
> Subsystem: Giga-byte Technology Device [1458:5007]
> Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Interrupt: pin A routed to IRQ 17
> Region 0: Memory at fdafe000 (64-bit, non-prefetchable) [size=8K]
> Capabilities: <access denied>
> Kernel modules: xhci
>
> 05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03)
> Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:e000]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 30
> Region 0: I/O ports at be00 [size=256]
> Region 2: Memory at fd6ff000 (64-bit, prefetchable) [size=4K]
> Region 4: Memory at fd6f8000 (64-bit, prefetchable) [size=16K]
> [virtual] Expansion ROM at fd600000 [disabled] [size=128K]
> Capabilities: <access denied>
> Kernel driver in use: r8169
> Kernel modules: r8169
>
> 06:07.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [14f1:8800] (rev 05)
> Subsystem: Hauppauge computer works Inc. Nova-S-Plus DVB-S [0070:9202]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32 (5000ns min, 13750ns max), Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 21
> Region 0: Memory at f9000000 (32-bit, non-prefetchable) [size=16M]
> Capabilities: <access denied>
> Kernel driver in use: cx8800
> Kernel modules: cx8800
>
> 06:07.1 Multimedia controller [0480]: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] [14f1:8801] (rev 05)
> Subsystem: Hauppauge computer works Inc. Device [0070:9202]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32 (1000ns min, 63750ns max), Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 21
> Region 0: Memory at f8000000 (32-bit, non-prefetchable) [size=16M]
> Capabilities: <access denied>
> Kernel driver in use: cx88_audio
> Kernel modules: cx88-alsa
>
> 06:07.2 Multimedia controller [0480]: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] [14f1:8802] (rev 05)
> Subsystem: Hauppauge computer works Inc. Device [0070:9202]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32 (1500ns min, 22000ns max), Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 21
> Region 0: Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
> Capabilities: <access denied>
> Kernel driver in use: cx88-mpeg driver manager
> Kernel modules: cx8802
>
> 06:07.4 Multimedia controller [0480]: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [IR Port] [14f1:8804] (rev 05)
> Subsystem: Hauppauge computer works Inc. Device [0070:9202]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32 (1500ns min, 63750ns max), Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 3
> Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
> Capabilities: <access denied>
>
> 06:0e.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) [104c:8024] (prog-if 10 [OHCI])
> Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:1000]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32 (500ns min, 1000ns max), Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 22
> Region 0: Memory at fcfff000 (32-bit, non-prefetchable) [size=2K]
> Region 1: Memory at fcff8000 (32-bit, non-prefetchable) [size=16K]
> Capabilities: <access denied>
> Kernel driver in use: firewire_ohci
> Kernel modules: firewire-ohci
>
>
> ** USB devices:
> Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 007 Device 003: ID 08bb:2900 Texas Instruments Japan PCM2900 Audio Codec
> Bus 007 Device 002: ID 058f:9254 Alcor Micro Corp. Hub
> Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 004 Device 002: ID 1307:0330 Transcend Information, Inc.
> Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 001 Device 003: ID 046d:c046 Logitech, Inc. RX1000 Laser Mouse
> Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>
>
> -- System Information:
> Debian Release: squeeze/sid
> APT prefers unstable
> APT policy: (500, 'unstable')
> Architecture: amd64 (x86_64)
>
> Kernel: Linux 2.6.32-5-amd64 (SMP w/4 CPU cores)
> Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
> Shell: /bin/sh linked to /bin/dash
>
> Versions of packages linux-image-2.6.32-5-amd64 depends on:
> ii debconf [debconf-2.0] 1.5.32 Debian configuration management sy
> ii initramfs-tools [linux-initr 0.95.1 tools for generating an initramfs
> ii linux-base 2.6.32-15 Linux image base package
> ii module-init-tools 3.12~pre2-3 tools for managing Linux kernel mo
>
> Versions of packages linux-image-2.6.32-5-amd64 recommends:
> ii firmware-linux-free 2.6.32-15 Binary firmware for various driver
>
> Versions of packages linux-image-2.6.32-5-amd64 suggests:
> ii grub 0.97-61 GRand Unified Bootloader (dummy pa
> pn linux-doc-2.6.32 <none> (no description available)
>
> Versions of packages linux-image-2.6.32-5-amd64 is related to:
> pn firmware-bnx2 <none> (no description available)
> pn firmware-bnx2x <none> (no description available)
> pn firmware-ipw2x00 <none> (no description available)
> pn firmware-ivtv <none> (no description available)
> pn firmware-iwlwifi <none> (no description available)
> pn firmware-linux <none> (no description available)
> pn firmware-linux-nonfree <none> (no description available)
> pn firmware-qlogic <none> (no description available)
> pn firmware-ralink <none> (no description available)
> pn xen-hypervisor <none> (no description available)
>
> -- debconf information excluded
>
>
>

--
Ben Hutchings
Once a job is fouled up, anything done to improve it makes it worse.
 
Old 06-07-2010, 04:20 PM
Sarah Sharp
 
Default Bug#584830: linux-image-2.6.32-5-amd64: USB 3.0 / xhci prevents suspend

On Mon, Jun 07, 2010 at 02:18:26AM +0100, Ben Hutchings wrote:
> On Mon, 2010-06-07 at 00:33 +0200, Thomas Jollans wrote:
> > Package: linux-2.6
> > Version: 2.6.32-15
> > Severity: normal
> >
> > My motherboard includes a USB 3.0 controller, handled by the xhci
> > module. When the xhci module is loaded, the system fails to suspend with
> > the following log messages:
> >
> > [ 458.601622] pm_op(): usb_dev_suspend+0x0/0xa [usbcore] returns -2
> > [ 458.601624] PM: Device usb2 failed to suspend: error -2
> >
> > When I unload the xhci module, the system suspends just fine, without
> > this message.
>
> Sarah, any idea what's going on here? Debian version 2.6.32-15 is
> closely based on stable version 2.6.32.14. I didn't see any later
> changes to xhci that look related to PM.

The report is expected behavior, since the xHCI driver doesn't implement
PCI and USB bus power management yet.

The xHCI power management code is still under development. I'm not sure
if this code will be added to 2.6.32 stable, since it will add a lot of
code to the driver. The code may need to be backported.

Can you add this bug (or a link to the debian bug) to the kernel.org
bugzilla? I'm trying to get all my xHCI-related bug reports and feature
requests there.

Sarah Sharp



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20100607162007.GB8300@xanatos">http://lists.debian.org/20100607162007.GB8300@xanatos
 
Old 06-07-2010, 04:55 PM
Ben Hutchings
 
Default Bug#584830: linux-image-2.6.32-5-amd64: USB 3.0 / xhci prevents suspend

On Mon, Jun 07, 2010 at 09:20:07AM -0700, Sarah Sharp wrote:
> On Mon, Jun 07, 2010 at 02:18:26AM +0100, Ben Hutchings wrote:
> > On Mon, 2010-06-07 at 00:33 +0200, Thomas Jollans wrote:
> > > Package: linux-2.6
> > > Version: 2.6.32-15
> > > Severity: normal
> > >
> > > My motherboard includes a USB 3.0 controller, handled by the xhci
> > > module. When the xhci module is loaded, the system fails to suspend with
> > > the following log messages:
> > >
> > > [ 458.601622] pm_op(): usb_dev_suspend+0x0/0xa [usbcore] returns -2
> > > [ 458.601624] PM: Device usb2 failed to suspend: error -2
> > >
> > > When I unload the xhci module, the system suspends just fine, without
> > > this message.
> >
> > Sarah, any idea what's going on here? Debian version 2.6.32-15 is
> > closely based on stable version 2.6.32.14. I didn't see any later
> > changes to xhci that look related to PM.
>
> The report is expected behavior, since the xHCI driver doesn't implement
> PCI and USB bus power management yet.

That seems like a big problem if the xhci driver is going to be auto-loaded
in desktops and laptops.

> The xHCI power management code is still under development. I'm not sure
> if this code will be added to 2.6.32 stable, since it will add a lot of
> code to the driver. The code may need to be backported.

I doubt it is a candidate for 2.6.32 stable, but I think we would want to
include it in Debian's kernel packages based on 2.6.32.

> Can you add this bug (or a link to the debian bug) to the kernel.org
> bugzilla? I'm trying to get all my xHCI-related bug reports and feature
> requests there.

Will do.

Ben.

--
Ben Hutchings
We get into the habit of living before acquiring the habit of thinking.
- Albert Camus



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20100607165501.GN5306@decadent.org.uk">http://lists.debian.org/20100607165501.GN5306@decadent.org.uk
 

Thread Tools




All times are GMT. The time now is 10:04 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org