Package: linux-2.6
Version: 2.6.32-9
Severity: minor

When I switch to a virtual console and press the Caps Lock key, I expect
the Caps Lock LED on my laptop to toggle on and off. The Caps Lock key
does make all the other keys use upper case, just the LED doesn't switch
on. On virtual consoles the Num Lk and Scroll Lk keys both toggle their
LEDs on and off. In Xorg under GNOME the Caps Lock key toggles its LED
on and off fine.

-- Package-specific info:
** Version:
Linux version 2.6.32-3-amd64 (Debian 2.6.32-9) (maks@debian.org) (gcc version 4.3.4 (Debian 4.3.4-8) ) #1 SMP Wed Feb 24 18:07:42 UTC 2010

** Command line:
BOOT_IMAGE=/vmlinuz-2.6.32-3-amd64 root=/dev/mapper/chianamo-root ro quiet loglevel=0 video=i915

** Not tainted

** Kernel log:
[26758.500518] sr0: CDROM not ready. Make sure there is a disc in the drive.
[26758.720193] [drm] TV-14: set mode NTSC 480i 0
[26758.860598] [drm] TV-14: set mode NTSC 480i 0
[26769.497665] [drm] TV-14: set mode NTSC 480i 0
[26769.638023] [drm] TV-14: set mode NTSC 480i 0
[26773.568196] [drm] TV-14: set mode NTSC 480i 0
[26773.708565] [drm] TV-14: set mode NTSC 480i 0
[26810.040213] [drm] TV-14: set mode NTSC 480i 0
[26810.180225] [drm] TV-14: set mode NTSC 480i 0
[26816.716378] [drm] TV-14: set mode NTSC 480i 0
[26816.856755] [drm] TV-14: set mode NTSC 480i 0
[26823.971862] [drm] TV-14: set mode NTSC 480i 0
[26824.112333] [drm] TV-14: set mode NTSC 480i 0
[26826.068805] sr0: CDROM not ready. Make sure there is a disc in the drive.
[26828.720452] sr0: CDROM not ready. Make sure there is a disc in the drive.
[26828.940761] [drm] TV-14: set mode NTSC 480i 0
[26829.082010] [drm] TV-14: set mode NTSC 480i 0
[26836.148505] sr0: CDROM not ready. Make sure there is a disc in the drive.
[27108.932511] sr0: CDROM not ready. Make sure there is a disc in the drive.
[27109.153847] [drm] TV-14: set mode NTSC 480i 0
[27109.294173] [drm] TV-14: set mode NTSC 480i 0
[27119.933153] [drm] TV-14: set mode NTSC 480i 0
[27120.073851] [drm] TV-14: set mode NTSC 480i 0
[27126.457543] sr0: CDROM not ready. Make sure there is a disc in the drive.
[27176.756497] sr0: CDROM not ready. Make sure there is a disc in the drive.
[27176.995037] [drm] TV-14: set mode NTSC 480i 0
[27177.138811] [drm] TV-14: set mode NTSC 480i 0
[27187.764127] [drm] TV-14: set mode NTSC 480i 0
[27187.904579] [drm] TV-14: set mode NTSC 480i 0
[27207.324499] sr0: CDROM not ready. Make sure there is a disc in the drive.
[27209.736493] [drm] TV-14: set mode NTSC 480i 0
[27209.877048] [drm] TV-14: set mode NTSC 480i 0
[27230.284499] sr0: CDROM not ready. Make sure there is a disc in the drive.
[27234.508502] sr0: CDROM not ready. Make sure there is a disc in the drive.
[27234.728149] [drm] TV-14: set mode NTSC 480i 0
[27234.868529] [drm] TV-14: set mode NTSC 480i 0
[27239.824594] [drm] TV-14: set mode NTSC 480i 0
[27239.965238] [drm] TV-14: set mode NTSC 480i 0
[27241.224504] sr0: CDROM not ready. Make sure there is a disc in the drive.
[27242.296797] sr0: CDROM not ready. Make sure there is a disc in the drive.
[27242.516221] [drm] TV-14: set mode NTSC 480i 0
[27242.656582] [drm] TV-14: set mode NTSC 480i 0
[27253.280656] [drm] TV-14: set mode NTSC 480i 0
[27253.420968] [drm] TV-14: set mode NTSC 480i 0
[27261.372488] [drm] TV-14: set mode NTSC 480i 0
[27261.512870] [drm] TV-14: set mode NTSC 480i 0
[27281.580615] [drm] TV-14: set mode NTSC 480i 0
[27281.721135] [drm] TV-14: set mode NTSC 480i 0
[27284.152493] sr0: CDROM not ready. Make sure there is a disc in the drive.
[27362.244520] sr0: CDROM not ready. Make sure there is a disc in the drive.
[27362.464374] [drm] TV-14: set mode NTSC 480i 0
[27362.604752] [drm] TV-14: set mode NTSC 480i 0
[27373.252298] [drm] TV-14: set mode NTSC 480i 0
[27373.392690] [drm] TV-14: set mode NTSC 480i 0
[27389.480469] sr0: CDROM not ready. Make sure there is a disc in the drive.
[27390.772500] [drm] TV-14: set mode NTSC 480i 0
[27390.912930] [drm] TV-14: set mode NTSC 480i 0
[27416.700496] sr0: CDROM not ready. Make sure there is a disc in the drive.
[27431.900544] sr0: CDROM not ready. Make sure there is a disc in the drive.
[27432.136638] [drm] TV-14: set mode NTSC 480i 0
[27432.277017] [drm] TV-14: set mode NTSC 480i 0
[27438.601021] [drm] TV-14: set mode NTSC 480i 0
[27438.741463] [drm] TV-14: set mode NTSC 480i 0
[27440.964775] sr0: CDROM not ready. Make sure there is a disc in the drive.
[27442.292178] [drm] TV-14: set mode NTSC 480i 0
[27442.432221] [drm] TV-14: set mode NTSC 480i 0
[27501.412496] sr0: CDROM not ready. Make sure there is a disc in the drive.
[27502.824502] sr0: CDROM not ready. Make sure there is a disc in the drive.
[27503.045169] [drm] TV-14: set mode NTSC 480i 0
[27503.186453] [drm] TV-14: set mode NTSC 480i 0
[27504.760328] [drm] TV-14: set mode NTSC 480i 0
[27504.900406] [drm] TV-14: set mode NTSC 480i 0
[27506.816631] sr0: CDROM not ready. Make sure there is a disc in the drive.
[27508.128179] [drm] TV-14: set mode NTSC 480i 0
[27508.268860] [drm] TV-14: set mode NTSC 480i 0
[27560.616506] sr0: CDROM not ready. Make sure there is a disc in the drive.
[27562.904610] [drm] TV-14: set mode NTSC 480i 0
[27563.045243] [drm] TV-14: set mode NTSC 480i 0
[27821.105495] sr0: CDROM not ready. Make sure there is a disc in the drive.
[28008.416521] sr0: CDROM not ready. Make sure there is a disc in the drive.
[28008.636174] [drm] TV-14: set mode NTSC 480i 0
[28008.776549] [drm] TV-14: set mode NTSC 480i 0
[28013.748145] [drm] TV-14: set mode NTSC 480i 0
[28013.888552] [drm] TV-14: set mode NTSC 480i 0
[28015.664499] sr0: CDROM not ready. Make sure there is a disc in the drive.
[28016.971923] [drm] TV-14: set mode NTSC 480i 0
[28017.113031] [drm] TV-14: set mode NTSC 480i 0
[28029.904471] sr0: CDROM not ready. Make sure there is a disc in the drive.
[28031.985213] [drm] TV-14: set mode NTSC 480i 0
[28032.124969] [drm] TV-14: set mode NTSC 480i 0
[28107.180487] sr0: CDROM not ready. Make sure there is a disc in the drive.
[28110.602151] [drm] TV-14: set mode NTSC 480i 0
[28110.742563] [drm] TV-14: set mode NTSC 480i 0
[28124.657824] sr0: CDROM not ready. Make sure there is a disc in the drive.
[28126.039862] [drm] TV-14: set mode NTSC 480i 0
[28126.180792] [drm] TV-14: set mode NTSC 480i 0
[28135.749871] sr0: CDROM not ready. Make sure there is a disc in the drive.
[28137.512420] [drm] TV-14: set mode NTSC 480i 0
[28137.652872] [drm] TV-14: set mode NTSC 480i 0
[28396.676461] sr0: CDROM not ready. Make sure there is a disc in the drive.

** Model information
sys_vendor: Dell Inc.
product_name: MM061
product_version:
chassis_vendor: Dell Inc.
chassis_version:
bios_vendor: Dell Inc.
bios_version: A14
board_vendor: Dell Inc.
board_name: 0KD882
board_version:

** Loaded modules:
Module Size Used by
acpi_cpufreq 5555 0
cpufreq_conservative 5162 0
cpufreq_stats 2659 0
cpufreq_userspace 1992 0
cpufreq_powersave 902 0
sco 7193 2
bridge 39598 0
stp 1440 1 bridge
bnep 9411 2
rfcomm 29517 4
l2cap 24656 6 bnep,rfcomm
crc16 1319 1 l2cap
uinput 6376 1
deflate 1767 0
zlib_deflate 17746 1 deflate
ctr 3363 0
twofish 6025 0
twofish_common 13472 1 twofish
camellia 17463 0
serpent 16791 0
blowfish 7944 0
cast5 16349 0
des_generic 15475 0
xcbc 2325 0
rmd160 7104 0
sha1_generic 1759 0
hmac 2593 0
crypto_null 2492 0
af_key 25437 0
fuse 50110 3
ext2 52969 1
usb_storage 38521 0
cdc_ether 3377 0
usbnet 11779 1 cdc_ether
loop 11783 0
snd_hda_codec_idt 42417 1
snd_hda_intel 19619 3
snd_hda_codec 54212 2 snd_hda_codec_idt,snd_hda_intel
snd_hwdep 5364 1 snd_hda_codec
snd_pcm_oss 32591 0
snd_mixer_oss 12606 1 snd_pcm_oss
snd_pcm 60615 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
arc4 1274 2
snd_seq_midi 4400 0
btusb 9785 0
snd_rawmidi 15483 1 snd_seq_midi
ecb 1841 2
bluetooth 41795 7 sco,bnep,rfcomm,l2cap,btusb
snd_seq_midi_event 4628 1 snd_seq_midi
snd_seq 42801 2 snd_seq_midi,snd_seq_midi_event
snd_timer 15502 2 snd_pcm,snd_seq
iwl3945 52862 0
snd_seq_device 4477 3 snd_seq_midi,snd_rawmidi,snd_seq
iwlcore 77878 1 iwl3945
i915 248774 2
drm_kms_helper 18899 1 i915
mac80211 136188 2 iwl3945,iwlcore
joydev 8411 0
snd 46350 17 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_ hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmid i,snd_seq,snd_timer,snd_seq_device
drm 137190 3 i915,drm_kms_helper
soundcore 4598 1 snd
cfg80211 101384 3 iwl3945,iwlcore,mac80211
dell_laptop 1969 0
snd_page_alloc 6217 2 snd_hda_intel,snd_pcm
rfkill 13012 5 bluetooth,cfg80211,dell_laptop
i2c_i801 7798 0
i2c_algo_bit 4225 1 i915
intel_agp 25593 1
rng_core 2990 0
psmouse 49505 0
i2c_core 15584 4 i915,drm,i2c_i801,i2c_algo_bit
dcdbas 5048 1 dell_laptop
serio_raw 3752 0
evdev 7336 24
video 17445 1 i915
ac 2192 0
output 1692 1 video
wmi 4307 0
button 4634 1 i915
battery 4998 0
processor 30215 3 acpi_cpufreq
ext3 106486 1
jbd 37053 1 ext3
mbcache 4970 2 ext2,ext3
sha256_generic 8692 2
cryptd 5366 0
aes_x86_64 7340 4
aes_generic 25714 1 aes_x86_64
cbc 2539 1
usbhid 33132 0
hid 62825 1 usbhid
dm_crypt 10507 1
dm_mod 53674 9 dm_crypt
sg 18728 0
sr_mod 12602 0
cdrom 29399 1 sr_mod
sd_mod 29689 3
crc_t10dif 1276 1 sd_mod
b44 21668 0
ata_generic 2983 0
ide_pci_generic 2788 0
ssb 38363 1 b44
ide_core 76850 1 ide_pci_generic
pcmcia 19426 1 ssb
sdhci_pci 5581 0
sdhci 13966 1 sdhci_pci
ata_piix 19773 2
uhci_hcd 18505 0
pcmcia_core 24070 2 ssb,pcmcia
mmc_core 45488 2 ssb,sdhci
libata 132183 2 ata_generic,ata_piix
thermal 11674 0
ehci_hcd 30706 0
ricoh_mmc 3069 0
mii 3210 2 usbnet,b44
led_class 2401 3 iwl3945,iwlcore,sdhci
scsi_mod 121925 5 usb_storage,sg,sr_mod,sd_mod,libata
thermal_sys 11878 3 video,processor,thermal
usbcore 121703 8 usb_storage,cdc_ether,usbnet,btusb,usbhid,uhci_hcd ,ehci_hcd
nls_base 6377 1 usbcore

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
Subsystem: Dell Device [1028:01bd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03) (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:01bd]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at eff00000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at eff8 [size=8]
Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at efec0000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915

00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
Subsystem: Dell Device [1028:01bd]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at eff80000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>

00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 01)
Subsystem: Dell Device [1028:01bd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 21
Region 0: Memory at efebc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel

00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: efd00000-efdfffff
Prefetchable memory behind bridge: 0000000060000000-00000000601fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.3 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 4 [8086:27d6] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0c, subordinate=0d, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: efa00000-efcfffff
Prefetchable memory behind bridge: 00000000e0000000-00000000e01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH7 Family USB UHCI Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:01bd]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at bf80 [size=32]
Kernel driver in use: uhci_hcd

00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:01bd]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at bf60 [size=32]
Kernel driver in use: uhci_hcd

00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:01bd]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at bf40 [size=32]
Kernel driver in use: uhci_hcd

00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:01bd]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 4: I/O ports at bf20 [size=32]
Kernel driver in use: uhci_hcd

00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:01bd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at ffa80000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e1) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Memory behind bridge: ef900000-ef9fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 01)
Subsystem: Dell Device [1028:01bd]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>

00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller [8086:27c4] (rev 01) (prog-if 80 [Master])
Subsystem: Dell Device [1028:01bd]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at bfa0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix

00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 01)
Subsystem: Dell Device [1028:01bd]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 10c0 [size=32]
Kernel driver in use: i801_smbus

03:00.0 Ethernet controller [0200]: Broadcom Corporation BCM4401-B0 100Base-TX [14e4:170c] (rev 02)
Subsystem: Dell Inspiron 6400 [1028:01af]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 17
Region 0: Memory at ef9fe000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: b44

03:01.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (prog-if 10 [OHCI])
Subsystem: Dell Device [1028:01bd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max)
Interrupt: pin A routed to IRQ 3
Region 0: Memory at ef9fd800 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>

03:01.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 19) (prog-if 01)
Subsystem: Dell Device [1028:01bd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin B routed to IRQ 18
Region 0: Memory at ef9fd400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci

03:01.2 System peripheral [0880]: Ricoh Co Ltd R5C843 MMC Host Controller [1180:0843] (rev 0a)
Subsystem: Dell Device [1028:01bd]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 11
Region 0: Memory at ef9fd500 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ricoh-mmc

03:01.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 05)
Subsystem: Dell Device [1028:01bd]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 11
Region 0: Memory at ef9fd600 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>

03:01.4 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev ff) (prog-if ff)
!!! Unknown header type 7f

0b:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02)
Subsystem: Intel Corporation Device [8086:1022]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 26
Region 0: Memory at efdff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: iwl3945


** USB devices:
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (700, 'testing'), (600, 'unstable'), (550, 'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.32-3-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_AU.UTF-8, LC_CTYPE=en_AU.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-2.6.32-3-amd64 depends on:
ii debconf [debconf-2.0] 1.5.32 Debian configuration management sy
ii initramfs-tools [linux-initr 0.94.4 tools for generating an initramfs
ii module-init-tools 3.12~pre2-3 tools for managing Linux kernel mo

Versions of packages linux-image-2.6.32-3-amd64 recommends:
ii firmware-linux-free 2.6.32-9 Binary firmware for various driver

Versions of packages linux-image-2.6.32-3-amd64 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)

Versions of packages linux-image-2.6.32-3-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
ii firmware-iwlwifi 0.24 Binary firmware for Intel Wireless
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)

-- debconf information:
linux-image-2.6.32-3-amd64/prerm/removing-running-kernel-2.6.32-3-amd64: true
linux-image-2.6.32-3-amd64/postinst/bootloader-test-error-2.6.32-3-amd64:
linux-image-2.6.32-3-amd64/prerm/would-invalidate-boot-loader-2.6.32-3-amd64: true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-3-amd64/postinst/missing-firmware-2.6.32-3-amd64:
linux-image-2.6.32-3-amd64/postinst/depmod-error-initrd-2.6.32-3-amd64: false
linux-image-2.6.32-3-amd64/postinst/bootloader-error-2.6.32-3-amd64:

--
bye,
pabs

http://wiki.debian.org/PaulWise