FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 06-02-2010, 08:45 PM
Tshepang Lekhonkhobe
 
Default Bug#584273: previous dmesg logs were incomplete

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-14)
(ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-1) ) #1 SMP Sun
May 30 12:04:26 UTC 2010
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
[ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f6b0000 (usable)
[ 0.000000] BIOS-e820: 000000007f6b0000 - 000000007f6ca000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f6ca000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0x7f6b0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07F700000 mask FFFF00000 uncachable
[ 0.000000] 2 base 07F800000 mask FFF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037000000 page 2M
[ 0.000000] 0037000000 - 00373fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 7000-d000
[ 0.000000] RAMDISK: 375a3000 - 37fef4b6
[ 0.000000] Allocated new RAMDISK: 00100000 - 00b4c4b6
[ 0.000000] Move RAMDISK from 00000000375a3000 - 0000000037fef4b5
to 00100000 - 00b4c4b5
[ 0.000000] ACPI: RSDP 000f7040 00024 (v02 ACRSYS)
[ 0.000000] ACPI: XSDT 7f6bce7f 00094 (v01 ACRSYS ACRPRDCT 06040000
LTP 00000000)
[ 0.000000] ACPI: FACP 7f6c6bd7 000F4 (v03 INTEL CRESTLNE 06040000
ALAN 00000001)
[ 0.000000] ACPI: DSDT 7f6be43d 08726 (v02 INTEL CRESTLNE 06040000
INTL 20050624)
[ 0.000000] ACPI: FACS 7f6c9fc0 00040
[ 0.000000] ACPI: HPET 7f6c6ccb 00038 (v01 INTEL CRESTLNE 06040000
LOHR 0000005A)
[ 0.000000] ACPI: MCFG 7f6c6d03 0003C (v01 INTEL CRESTLNE 06040000
LOHR 0000005A)
[ 0.000000] ACPI: TCPA 7f6c6d3f 00032 (v01 Intel CRESTLN 06040000
00005A52)
[ 0.000000] ACPI: TMOR 7f6c6d71 00026 (v01 PTLTD 06040000
PTL 00000003)
[ 0.000000] ACPI: APIC 7f6c6d97 00068 (v01 PTLTD ? APIC 06040000
LTP 00000000)
[ 0.000000] ACPI: SLIC 7f6c6dff 00176 (v01 ACRSYS ACRPRDCT 06040000
LTP 00000000)
[ 0.000000] ACPI: BOOT 7f6c6f75 00028 (v01 PTLTD $SBFTBL$ 06040000
LTP 00000001)
[ 0.000000] ACPI: ASF! 7f6c6f9d 00063 (v16 CETP CETP 06040000
PTL 00000001)
[ 0.000000] ACPI: SSDT 7f6be148 002F5 (v01 SataRe SataAhci 00001000
INTL 20050624)
[ 0.000000] ACPI: SSDT 7f6be0b6 00092 (v01 BrtRef DD01BRT 00001000
INTL 20050624)
[ 0.000000] ACPI: SSDT 7f6bd49f 0025F (v01 PmRef Cpu0Tst 00003000
INTL 20050624)
[ 0.000000] ACPI: SSDT 7f6bd3f9 000A6 (v01 PmRef Cpu1Tst 00003000
INTL 20050624)
[ 0.000000] ACPI: SSDT 7f6bcf13 004E6 (v01 PmRef CpuPm 00003000
INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1154MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 0 - 373fe000
[ 0.000000] node 0 low ram: 00000000 - 373fe000
[ 0.000000] node 0 bootmap 00009000 - 0000fe80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==>
[0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==>
[0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==>
[0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 00014c3154] TEXT DATA BSS ==>
[0001000000 - 00014c3154]
[ 0.000000] #4 [000009e000 - 0000100000] BIOS reserved ==>
[000009e000 - 0000100000]
[ 0.000000] #5 [00014c4000 - 00014ca13c] BRK ==>
[00014c4000 - 00014ca13c]
[ 0.000000] #6 [0000007000 - 0000009000] PGTABLE ==>
[0000007000 - 0000009000]
[ 0.000000] #7 [0000100000 - 0000b4c4b6] NEW RAMDISK ==>
[0000100000 - 0000b4c4b6]
[ 0.000000] #8 [0000009000 - 0000010000] BOOTMAP ==>
[0000009000 - 0000010000]
[ 0.000000] found SMP MP-table at [c00f70e0] f70e0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x0007f6b0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x0007f6b0
[ 0.000000] On node 0 totalpages: 521806
[ 0.000000] free_area_init_node: node 0, pgdat c13ae680,
node_mem_map c14cc000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3966 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2310 pages used for memmap
[ 0.000000] HighMem zone: 293292 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap:
80000000:60000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2800000 s34136 r0 d23208 u2097152
[ 0.000000] pcpu-alloc: s34136 r0 d23208 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 517728
[ 0.000000] Kernel command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686
root=UUID=46e0b279-1a26-4822-9126-d0f553decc64 ro blacklist=tpm_tis
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000373fe:0007f6b0)
[ 0.000000] Memory: 2053432k/2087616k available (2490k kernel code,
32760k reserved, 1318k data, 372k init, 1182408k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.000000] .init : 0xc13b9000 - 0xc1416000 ( 372 kB)
[ 0.000000] .data : 0xc126e965 - 0xc13b81e0 (1318 kB)
[ 0.000000] .text : 0xc1000000 - 0xc126e965 (2490 kB)
[ 0.000000] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0,
CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2194.281 MHz processor.
[ 0.004005] Calibrating delay loop (skipped), value calculated
using timer frequency.. 4388.56 BogoMIPS (lpj=8777124)
[ 0.004131] Security Framework initialized
[ 0.004190] SELinux: Disabled at boot.
[ 0.004250] Mount-cache hash table entries: 512
[ 0.004412] Initializing cgroup subsys ns
[ 0.004470] Initializing cgroup subsys cpuacct
[ 0.004529] Initializing cgroup subsys devices
[ 0.004584] Initializing cgroup subsys freezer
[ 0.004641] Initializing cgroup subsys net_cls
[ 0.004715] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004813] CPU: L2 cache: 4096K
[ 0.004868] CPU: Physical Processor ID: 0
[ 0.004923] CPU: Processor Core ID: 0
[ 0.004981] mce: CPU supports 6 MCE banks
[ 0.005042] CPU0: Thermal monitoring handled by SMI
[ 0.005045] using mwait in idle threads.
[ 0.005106] Performance Events: Core2 events, Intel PMU driver.
[ 0.005247] ... version: 2
[ 0.005304] ... bit width: 40
[ 0.005359] ... generic registers: 2
[ 0.005414] ... value mask: 000000ffffffffff
[ 0.005473] ... max period: 000000007fffffff
[ 0.005530] ... fixed-purpose events: 3
[ 0.005587] ... event mask: 0000000700000003
[ 0.005645] Checking 'hlt' instruction... OK.
[ 0.021022] ACPI: Core revision 20090903
[ 0.036058] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.036470] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.077506] CPU0: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0b
[ 0.080001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 4096K
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.008000] CPU1: Thermal monitoring handled by SMI
[ 0.164096] CPU1: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0b
[ 0.164535] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.168049] Brought up 2 CPUs
[ 0.168108] Total of 2 processors activated (8777.53 BogoMIPS).
[ 0.168739] CPU0 attaching sched-domain:
[ 0.168742] domain 0: span 0-1 level MC
[ 0.168745] groups: 0 1
[ 0.168749] CPU1 attaching sched-domain:
[ 0.168751] domain 0: span 0-1 level MC
[ 0.168753] groups: 1 0
[ 0.168831] devtmpfs: initialized
[ 0.168831] regulator: core version 0.5
[ 0.168831] NET: Registered protocol family 16
[ 0.168925] ACPI: bus type pci registered
[ 0.169045] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.169109] PCI: MCFG area at e0000000 reserved in E820
[ 0.169168] PCI: Using MMCONFIG for extended config space
[ 0.169228] PCI: Using configuration type 1 for base access
[ 0.169542] bio: create slab <bio-0> at 0
[ 0.172432] ACPI: EC: Look up EC in DSDT
[ 0.184012] ACPI: BIOS _OSI(Linux) query ignored
[ 0.196985] ACPI: Interpreter enabled
[ 0.197048] ACPI: (supports S0 S3 S4 S5)
[ 0.197296] ACPI: Using IOAPIC for interrupt routing
[ 0.204204] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[ 0.204335] ACPI: Power Resource [FN00] (off)
[ 0.205110] ACPI: ACPI Dock Station Driver: 2 docks/bays found
[ 0.205698] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.205837] pci 0000:00:02.0: reg 10 64bit mmio: [0xfc000000-0xfc0fffff]
[ 0.205844] pci 0000:00:02.0: reg 18 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.205849] pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807]
[ 0.205887] pci 0000:00:02.1: reg 10 64bit mmio: [0xfc100000-0xfc1fffff]
[ 0.205998] pci 0000:00:19.0: reg 10 32bit mmio: [0xfc300000-0xfc31ffff]
[ 0.206006] pci 0000:00:19.0: reg 14 32bit mmio: [0xfc325000-0xfc325fff]
[ 0.206015] pci 0000:00:19.0: reg 18 io port: [0x1840-0x185f]
[ 0.206068] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.206132] pci 0000:00:19.0: PME# disabled
[ 0.206245] pci 0000:00:1a.0: reg 20 io port: [0x1860-0x187f]
[ 0.206314] pci 0000:00:1a.1: reg 20 io port: [0x1880-0x189f]
[ 0.206389] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfc526c00-0xfc526fff]
[ 0.206459] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.206523] pci 0000:00:1a.7: PME# disabled
[ 0.206636] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfc320000-0xfc323fff]
[ 0.206700] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.206764] pci 0000:00:1b.0: PME# disabled
[ 0.206918] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.206981] pci 0000:00:1c.0: PME# disabled
[ 0.207137] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.207202] pci 0000:00:1c.1: PME# disabled
[ 0.207358] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.207422] pci 0000:00:1c.2: PME# disabled
[ 0.207578] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.207642] pci 0000:00:1c.3: PME# disabled
[ 0.207768] pci 0000:00:1d.0: reg 20 io port: [0x18a0-0x18bf]
[ 0.207836] pci 0000:00:1d.1: reg 20 io port: [0x18c0-0x18df]
[ 0.207907] pci 0000:00:1d.2: reg 20 io port: [0x18e0-0x18ff]
[ 0.207982] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfc527000-0xfc5273ff]
[ 0.208059] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.208124] pci 0000:00:1d.7: PME# disabled
[ 0.208362] pci 0000:00:1f.0: quirk: region 1000-107f claimed by
ICH6 ACPI/GPIO/TCO
[ 0.208437] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
[ 0.208501] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at
0400 (mask 0003)
[ 0.208575] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at
1640 (mask 007f)
[ 0.208649] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at
0300 (mask 005f)
[ 0.208774] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.208782] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.208791] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.208799] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.208807] pci 0000:00:1f.1: reg 20 io port: [0x1c00-0x1c0f]
[ 0.208884] pci 0000:00:1f.2: reg 10 io port: [0x1c50-0x1c57]
[ 0.208892] pci 0000:00:1f.2: reg 14 io port: [0x1c44-0x1c47]
[ 0.208900] pci 0000:00:1f.2: reg 18 io port: [0x1c48-0x1c4f]
[ 0.208907] pci 0000:00:1f.2: reg 1c io port: [0x1c40-0x1c43]
[ 0.208915] pci 0000:00:1f.2: reg 20 io port: [0x1c20-0x1c3f]
[ 0.208923] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfc526000-0xfc5267ff]
[ 0.208968] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.209030] pci 0000:00:1f.2: PME# disabled
[ 0.209120] pci 0000:00:1f.3: reg 10 32bit mmio: [0x000000-0x0000ff]
[ 0.209147] pci 0000:00:1f.3: reg 20 io port: [0x1c60-0x1c7f]
[ 0.209238] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff]
[ 0.209243] pci 0000:00:1c.0: bridge 32bit mmio: [0xf6000000-0xf7ffffff]
[ 0.209251] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf0000000-0xf1ffffff]
[ 0.209315] pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff]
[ 0.209320] pci 0000:00:1c.1: bridge 32bit mmio: [0xf8000000-0xf9ffffff]
[ 0.209328] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xf2000000-0xf3ffffff]
[ 0.209450] pci 0000:06:00.0: reg 10 64bit mmio: [0xc8000000-0xc8001fff]
[ 0.209587] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[ 0.209675] pci 0000:06:00.0: PME# disabled
[ 0.216163] pci 0000:00:1c.2: bridge io port: [0x4000-0x4fff]
[ 0.216168] pci 0000:00:1c.2: bridge 32bit mmio: [0xc8000000-0xc9ffffff]
[ 0.216176] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xcc000000-0xcdffffff]
[ 0.216240] pci 0000:00:1c.3: bridge io port: [0x5000-0x5fff]
[ 0.216245] pci 0000:00:1c.3: bridge 32bit mmio: [0xfa000000-0xfbffffff]
[ 0.216253] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xf4000000-0xf5ffffff]
[ 0.216304] pci 0000:0a:04.0: reg 10 32bit mmio: [0xfc204000-0xfc204fff]
[ 0.216313] pci 0000:0a:04.0: reg 14 32bit mmio: [0xfc208000-0xfc2087ff]
[ 0.216369] pci 0000:0a:04.0: supports D1 D2
[ 0.216371] pci 0000:0a:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.216435] pci 0000:0a:04.0: PME# disabled
[ 0.216539] pci 0000:0a:04.1: reg 10 32bit mmio: [0xfc205000-0xfc205fff]
[ 0.216566] pci 0000:0a:04.1: supports D1 D2
[ 0.216568] pci 0000:0a:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.216632] pci 0000:0a:04.1: PME# disabled
[ 0.216736] pci 0000:0a:04.2: reg 10 32bit mmio: [0xfc209000-0xfc2090ff]
[ 0.216803] pci 0000:0a:04.2: supports D1 D2
[ 0.216805] pci 0000:0a:04.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.216870] pci 0000:0a:04.2: PME# disabled
[ 0.216973] pci 0000:0a:04.3: reg 10 32bit mmio: [0xfc206000-0xfc206fff]
[ 0.217040] pci 0000:0a:04.3: supports D1 D2
[ 0.217042] pci 0000:0a:04.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.217107] pci 0000:0a:04.3: PME# disabled
[ 0.217222] pci 0000:0a:05.0: reg 10 32bit mmio: [0xfc207000-0xfc207fff]
[ 0.217249] pci 0000:0a:05.0: supports D1 D2
[ 0.217251] pci 0000:0a:05.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.217317] pci 0000:0a:05.0: PME# disabled
[ 0.217426] pci 0000:0a:07.0: reg 10 32bit mmio: [0xfc208800-0xfc208fff]
[ 0.217435] pci 0000:0a:07.0: reg 14 32bit mmio: [0xfc200000-0xfc203fff]
[ 0.217495] pci 0000:0a:07.0: supports D1 D2
[ 0.217497] pci 0000:0a:07.0: PME# supported from D0 D1 D2 D3hot
[ 0.217561] pci 0000:0a:07.0: PME# disabled
[ 0.217671] pci 0000:00:1e.0: transparent bridge
[ 0.217736] pci 0000:00:1e.0: bridge 32bit mmio: [0xfc200000-0xfc2fffff]
[ 0.217819] pci_bus 0000:00: on NUMA node 0
[ 0.217824] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.218037] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.218111] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.218184] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.218257] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.218360] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.231184] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[ 0.231857] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12
14 15) *10
[ 0.232549] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12
14 15) *11
[ 0.233271] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 0.233943] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.234610] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12
14 15) *10
[ 0.235332] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12
14 15) *11
[ 0.236103] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.236756] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks= none
[ 0.236841] vgaarb: loaded
[ 0.236919] PCI: Using ACPI for IRQ routing
[ 0.236919] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.236919] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.240017] Switching to clocksource tsc
[ 0.241157] pnp: PnP ACPI init
[ 0.241219] ACPI: bus type pnp registered
[ 0.244922] pnp: PnP ACPI: found 14 devices
[ 0.244980] ACPI: ACPI bus type pnp unregistered
[ 0.245039] PnPBIOS: Disabled by ACPI PNP
[ 0.245104] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.245167] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 0.245231] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.245294] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.245357] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.245421] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.245484] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 0.245550] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
[ 0.245615] system 00:06: ioport range 0x400-0x401 has been reserved
[ 0.245678] system 00:06: ioport range 0x1f8-0x273 has been reserved
[ 0.245739] system 00:06: ioport range 0x680-0x69f has been reserved
[ 0.245801] system 00:06: ioport range 0x800-0x80f has been reserved
[ 0.245864] system 00:06: ioport range 0x1000-0x107f has been reserved
[ 0.245926] system 00:06: ioport range 0x1180-0x11bf has been reserved
[ 0.245988] system 00:06: ioport range 0x1640-0x164f has been reserved
[ 0.246051] system 00:06: ioport range 0xfe00-0xfe00 has been reserved
[ 0.280850] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.280914] pci 0000:00:1c.0: IO window: 0x2000-0x2fff
[ 0.280979] pci 0000:00:1c.0: MEM window: 0xf6000000-0xf7ffffff
[ 0.281044] pci 0000:00:1c.0: PREFETCH window:
0x000000f0000000-0x000000f1ffffff
[ 0.281122] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04
[ 0.281184] pci 0000:00:1c.1: IO window: 0x3000-0x3fff
[ 0.281249] pci 0000:00:1c.1: MEM window: 0xf8000000-0xf9ffffff
[ 0.281313] pci 0000:00:1c.1: PREFETCH window:
0x000000f2000000-0x000000f3ffffff
[ 0.281393] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:06
[ 0.281456] pci 0000:00:1c.2: IO window: 0x4000-0x4fff
[ 0.281520] pci 0000:00:1c.2: MEM window: 0xc8000000-0xc9ffffff
[ 0.281585] pci 0000:00:1c.2: PREFETCH window:
0x000000cc000000-0x000000cdffffff
[ 0.281663] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:08
[ 0.281726] pci 0000:00:1c.3: IO window: 0x5000-0x5fff
[ 0.281791] pci 0000:00:1c.3: MEM window: 0xfa000000-0xfbffffff
[ 0.281856] pci 0000:00:1c.3: PREFETCH window:
0x000000f4000000-0x000000f5ffffff
[ 0.281938] pci 0000:0a:04.1: CardBus bridge, secondary bus 0000:0b
[ 0.282000] pci 0000:0a:04.1: IO window: 0x006000-0x0060ff
[ 0.282064] pci 0000:0a:04.1: IO window: 0x006400-0x0064ff
[ 0.282127] pci 0000:0a:04.1: PREFETCH window: 0x80000000-0x83ffffff
[ 0.282192] pci 0000:0a:04.1: MEM window: 0x8c000000-0x8fffffff
[ 0.282257] pci 0000:0a:05.0: CardBus bridge, secondary bus 0000:0c
[ 0.282319] pci 0000:0a:05.0: IO window: 0x006800-0x0068ff
[ 0.282382] pci 0000:0a:05.0: IO window: 0x006c00-0x006cff
[ 0.282446] pci 0000:0a:05.0: PREFETCH window: 0x84000000-0x87ffffff
[ 0.282511] pci 0000:0a:05.0: MEM window: 0x90000000-0x93ffffff
[ 0.282575] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0a
[ 0.282637] pci 0000:00:1e.0: IO window: 0x6000-0x6fff
[ 0.282701] pci 0000:00:1e.0: MEM window: 0xfc200000-0xfc2fffff
[ 0.282765] pci 0000:00:1e.0: PREFETCH window: 0x80000000-0x87ffffff
[ 0.282844] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.282909] pci 0000:00:1c.0: setting latency timer to 64
[ 0.282920] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.282986] pci 0000:00:1c.1: setting latency timer to 64
[ 0.282997] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.283062] pci 0000:00:1c.2: setting latency timer to 64
[ 0.283073] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.283137] pci 0000:00:1c.3: setting latency timer to 64
[ 0.283143] pci 0000:00:1e.0: enabling device (0004 -> 0007)
[ 0.283207] pci 0000:00:1e.0: setting latency timer to 64
[ 0.283228] pci 0000:0a:04.1: enabling device (0080 -> 0083)
[ 0.283291] pci 0000:0a:04.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.283358] pci 0000:0a:04.1: setting latency timer to 64
[ 0.283371] pci 0000:0a:05.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 0.283436] pci 0000:0a:05.0: setting latency timer to 64
[ 0.283441] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.283443] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.283446] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
[ 0.283448] pci_bus 0000:02: resource 1 mem: [0xf6000000-0xf7ffffff]
[ 0.283451] pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf1ffffff]
[ 0.283453] pci_bus 0000:04: resource 0 io: [0x3000-0x3fff]
[ 0.283455] pci_bus 0000:04: resource 1 mem: [0xf8000000-0xf9ffffff]
[ 0.283458] pci_bus 0000:04: resource 2 pref mem [0xf2000000-0xf3ffffff]
[ 0.283460] pci_bus 0000:06: resource 0 io: [0x4000-0x4fff]
[ 0.283463] pci_bus 0000:06: resource 1 mem: [0xc8000000-0xc9ffffff]
[ 0.283465] pci_bus 0000:06: resource 2 pref mem [0xcc000000-0xcdffffff]
[ 0.283467] pci_bus 0000:08: resource 0 io: [0x5000-0x5fff]
[ 0.283470] pci_bus 0000:08: resource 1 mem: [0xfa000000-0xfbffffff]
[ 0.283472] pci_bus 0000:08: resource 2 pref mem [0xf4000000-0xf5ffffff]
[ 0.283475] pci_bus 0000:0a: resource 0 io: [0x6000-0x6fff]
[ 0.283477] pci_bus 0000:0a: resource 1 mem: [0xfc200000-0xfc2fffff]
[ 0.283479] pci_bus 0000:0a: resource 2 pref mem [0x80000000-0x87ffffff]
[ 0.283482] pci_bus 0000:0a: resource 3 io: [0x00-0xffff]
[ 0.283484] pci_bus 0000:0a: resource 4 mem: [0x000000-0xffffffff]
[ 0.283486] pci_bus 0000:0b: resource 0 io: [0x6000-0x60ff]
[ 0.283489] pci_bus 0000:0b: resource 1 io: [0x6400-0x64ff]
[ 0.283491] pci_bus 0000:0b: resource 2 pref mem [0x80000000-0x83ffffff]
[ 0.283493] pci_bus 0000:0b: resource 3 mem: [0x8c000000-0x8fffffff]
[ 0.283496] pci_bus 0000:0c: resource 0 io: [0x6800-0x68ff]
[ 0.283498] pci_bus 0000:0c: resource 1 io: [0x6c00-0x6cff]
[ 0.283501] pci_bus 0000:0c: resource 2 pref mem [0x84000000-0x87ffffff]
[ 0.283503] pci_bus 0000:0c: resource 3 mem: [0x90000000-0x93ffffff]
[ 0.283526] NET: Registered protocol family 2
[ 0.283648] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.283953] TCP established hash table entries: 131072 (order: 8,
1048576 bytes)
[ 0.284382] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.284613] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.284675] TCP reno registered
[ 0.284783] NET: Registered protocol family 1
[ 0.284856] pci 0000:00:02.0: Boot video device
[ 0.285032] Unpacking initramfs...
[ 0.552400] Freeing initrd memory: 10545k freed
[ 0.559762] Simple Boot Flag at 0x36 set to 0x1
[ 0.560110] audit: initializing netlink socket (disabled)
[ 0.560183] type=2000 audit(1275507713.559:1): initialized
[ 0.560451] highmem bounce pool size: 64 pages
[ 0.560512] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.561801] VFS: Disk quotas dquot_6.5.2
[ 0.561908] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.562040] msgmni has been set to 1723
[ 0.562266] alg: No test for stdrng (krng)
[ 0.562371] Block layer SCSI generic (bsg) driver version 0.4
loaded (major 253)
[ 0.562451] io scheduler noop registered
[ 0.562509] io scheduler anticipatory registered
[ 0.562570] io scheduler deadline registered
[ 0.562656] io scheduler cfq registered (default)
[ 0.562897] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.562917] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.563100] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.563120] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.563333] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
[ 0.563355] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.563524] pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X
[ 0.563535] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.563697] isapnp: Scanning for PnP cards...
[ 0.920817] isapnp: No Plug & Play device found
[ 0.922120] Linux agpgart interface v0.103
[ 0.922245] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[ 0.923612] agpgart-intel 0000:00:00.0: detected 7676K stolen memory
[ 0.928389] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.928519] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.928711] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.929151] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.929375] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at
0x60,0x64 irq 1,12
[ 0.941492] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 0.947311] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.947375] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.947454] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.947517] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.947583] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.948337] mice: PS/2 mouse device common for all mice
[ 0.948438] rtc_cmos 00:07: RTC can wake from S4
[ 0.948525] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 0.948622] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.948692] cpuidle: using governor ladder
[ 0.948751] cpuidle: using governor menu
[ 0.948819] No iBFT detected.
[ 0.949173] TCP cubic registered
[ 0.949348] NET: Registered protocol family 10
[ 0.949770] lo: Disabled Privacy Extensions
[ 0.950077] Mobile IPv6
[ 0.950134] NET: Registered protocol family 17
[ 0.950205] Using IPI No-Shortcut mode
[ 0.950314] PM: Resume from disk failed.
[ 0.950319] registered taskstats version 1
[ 0.951086] rtc_cmos 00:07: setting system clock to 2010-06-02
19:41:55 UTC (1275507715)
[ 0.951192] Initalizing network drop monitor service
[ 0.951279] Freeing unused kernel memory: 372k freed
[ 0.951488] Write protecting the kernel text: 2492k
[ 0.951565] Write protecting the kernel read-only data: 916k
[ 0.970505] udev: starting version 154
[ 0.990118] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
[ 1.104230] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 1.104298] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 1.104424] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.104518] e1000e 0000:00:19.0: setting latency timer to 64
[ 1.104667] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[ 1.108618] firewire_ohci 0000:0a:04.0: PCI INT A -> GSI 20 (level,
low) -> IRQ 20
[ 1.108699] firewire_ohci 0000:0a:04.0: setting latency timer to 64
[ 1.110107] usbcore: registered new interface driver usbfs
[ 1.110193] usbcore: registered new interface driver hub
[ 1.110279] usbcore: registered new device driver usb
[ 1.129258] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.131591] SCSI subsystem initialized
[ 1.133201] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.133272] ACPI: Thermal Zone [TZ00] (55 C)
[ 1.133496] thermal LNXTHERM:02: registered as thermal_zone1
[ 1.133562] ACPI: Thermal Zone [TZVR] (0 C)
[ 1.133782] thermal LNXTHERM:03: registered as thermal_zone2
[ 1.133860] ACPI: Thermal Zone [TZVL] (0 C)
[ 1.134079] thermal LNXTHERM:04: registered as thermal_zone3
[ 1.134158] ACPI: Thermal Zone [TZ01] (45 C)
[ 1.134580] sdhci: Secure Digital Host Controller Interface driver
[ 1.134661] sdhci: Copyright(c) Pierre Ossman
[ 1.149707] libata version 3.00 loaded.
[ 1.151064] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.161305] fan PNP0C0B:00: registered as cooling_device0
[ 1.161370] ACPI: Fan [FAN0] (off)
[ 1.184010] firewire_ohci: Added fw-ohci device 0000:0a:04.0, OHCI
version 1.10
[ 1.184126] sdhci-pci 0000:0a:04.2: SDHCI controller found
[1217:7120] (rev 1)
[ 1.184222] sdhci-pci 0000:0a:04.2: enabling device (0000 -> 0002)
[ 1.184288] sdhci-pci 0000:0a:04.2: PCI INT A -> GSI 20 (level,
low) -> IRQ 20
[ 1.184408] Registered led device: mmc0::
[ 1.184493] mmc0: SDHCI controller on PCI [0000:0a:04.2] using PIO
[ 1.184590] firewire_ohci 0000:0a:07.0: PCI INT A -> GSI 22 (level,
low) -> IRQ 22
[ 1.184676] firewire_ohci 0000:0a:07.0: setting latency timer to 64
[ 1.256010] firewire_ohci: Added fw-ohci device 0000:0a:07.0, OHCI
version 1.10
[ 1.354547] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1)
00:a0:d1:a3:87:c8
[ 1.354621] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 1.354715] 0000:00:19.0: eth0: MAC: 6, PHY: 6, PBA No: ffffff-0ff
[ 1.354819] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.354907] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.354913] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.355000] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned
bus number 1
[ 1.355124] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.359090] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 1.359104] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfc526c00
[ 1.373010] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.373094] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.373161] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.373233] usb usb1: Product: EHCI Host Controller
[ 1.373293] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[ 1.373354] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.373486] usb usb1: configuration #1 chosen from 1 choice
[ 1.373578] hub 1-0:1.0: USB hub found
[ 1.373644] hub 1-0:1.0: 4 ports detected
[ 1.373762] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.373834] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.373840] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.373908] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned
bus number 2
[ 1.374021] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001860
[ 1.374110] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.374183] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.374255] usb usb2: Product: UHCI Host Controller
[ 1.374314] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.374378] usb usb2: SerialNumber: 0000:00:1a.0
[ 1.374490] usb usb2: configuration #1 chosen from 1 choice
[ 1.374582] hub 2-0:1.0: USB hub found
[ 1.374651] hub 2-0:1.0: 2 ports detected
[ 1.374760] ata_piix 0000:00:1f.1: version 2.13
[ 1.374770] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.374877] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.374951] scsi0 : ata_piix
[ 1.375078] scsi1 : ata_piix
[ 1.375820] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1c00 irq 14
[ 1.375884] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1c08 irq 15
[ 1.375958] ahci 0000:00:1f.2: version 3.0
[ 1.375978] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.376212] ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
[ 1.376289] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3
Gbps 0x7 impl SATA mode
[ 1.376376] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio
slum part ccc
[ 1.376464] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.376699] scsi2 : ahci
[ 1.376825] scsi3 : ahci
[ 1.376947] scsi4 : ahci
[ 1.377289] ata3: SATA max UDMA/133 abar m2048@0xfc526000 port
0xfc526100 irq 29
[ 1.377368] ata4: SATA max UDMA/133 abar m2048@0xfc526000 port
0xfc526180 irq 29
[ 1.377442] ata5: SATA max UDMA/133 abar m2048@0xfc526000 port
0xfc526200 irq 29
[ 1.377567] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.377644] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.377649] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.377725] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
bus number 3
[ 1.377831] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.381769] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.381782] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc527000
[ 1.396009] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.396082] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.396145] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.396217] usb usb3: Product: EHCI Host Controller
[ 1.396277] usb usb3: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[ 1.396338] usb usb3: SerialNumber: 0000:00:1d.7
[ 1.396461] usb usb3: configuration #1 chosen from 1 choice
[ 1.396548] hub 3-0:1.0: USB hub found
[ 1.396611] hub 3-0:1.0: 6 ports detected
[ 1.396736] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.396807] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.396813] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.396886] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned
bus number 4
[ 1.397000] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
[ 1.397097] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.397160] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.397232] usb usb4: Product: UHCI Host Controller
[ 1.397292] usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.397353] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.397471] usb usb4: configuration #1 chosen from 1 choice
[ 1.397560] hub 4-0:1.0: USB hub found
[ 1.397628] hub 4-0:1.0: 2 ports detected
[ 1.397733] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.397805] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.397810] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.397880] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 5
[ 1.397985] uhci_hcd 0000:00:1d.0: irq 23, io base 0x000018a0
[ 1.398078] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.398143] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.398215] usb usb5: Product: UHCI Host Controller
[ 1.398275] usb usb5: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.398336] usb usb5: SerialNumber: 0000:00:1d.0
[ 1.398454] usb usb5: configuration #1 chosen from 1 choice
[ 1.398537] hub 5-0:1.0: USB hub found
[ 1.398599] hub 5-0:1.0: 2 ports detected
[ 1.398713] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.398784] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.398789] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.398864] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 6
[ 1.398978] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018c0
[ 1.399077] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.399140] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.399212] usb usb6: Product: UHCI Host Controller
[ 1.399272] usb usb6: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.399333] usb usb6: SerialNumber: 0000:00:1d.1
[ 1.399444] usb usb6: configuration #1 chosen from 1 choice
[ 1.399526] hub 6-0:1.0: USB hub found
[ 1.399588] hub 6-0:1.0: 2 ports detected
[ 1.399688] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.399760] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.399765] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.399829] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 7
[ 1.399933] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0
[ 1.400327] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.400390] usb usb7: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.400463] usb usb7: Product: UHCI Host Controller
[ 1.401189] usb usb7: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.401255] usb usb7: SerialNumber: 0000:00:1d.2
[ 1.401376] usb usb7: configuration #1 chosen from 1 choice
[ 1.401472] hub 7-0:1.0: USB hub found
[ 1.401537] hub 7-0:1.0: 2 ports detected
[ 1.684062] firewire_core: created device fw0: GUID 00a0d1a0d1a387c9, S400
[ 1.684159] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 1.700018] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.704025] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.704108] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.704622] ACPI Warning for \_SB_.PCI0.SATA.PRT0._GTF: Return type
mismatch - found Integer, expected Buffer (20090903/nspredef-1006)
[ 1.704808] ata3.00: _GTF unexpected object type 0x1
[ 1.756042] firewire_core: created device fw1: GUID 00a0d1a0d1a387c8, S400
[ 1.774181] ata3.00: ATA-8: WDC WD2500BEVS-22UST0, 01.01A01, max UDMA/133
[ 1.774249] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.775148] ata3.00: _GTF unexpected object type 0x1
[ 1.775518] ata3.00: configured for UDMA/133
[ 1.804605] ata1.01: ATAPI: Slimtype DVD A DS8A1P, CA14, max UDMA/33
[ 1.844258] ata1.01: configured for UDMA/33
[ 1.848036] scsi 0:0:1:0: CD-ROM Slimtype DVD A DS8A1P
CA14 PQ: 0 ANSI: 5
[ 1.848279] scsi 2:0:0:0: Direct-Access ATA WDC
WD2500BEVS-2 01.0 PQ: 0 ANSI: 5
[ 1.856200] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks:
(250 GB/232 GiB)
[ 1.856320] sd 2:0:0:0: [sda] Write Protect is off
[ 1.856383] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.856402] sd 2:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1.856583] sda: sda1 < sda5 sda6 sda7 sda8 > sda4
[ 1.900881] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.913776] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw
xa/form2 cdda tray
[ 1.913853] Uniform CD-ROM driver Revision: 3.20
[ 1.913984] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 1.917683] sr 0:0:1:0: Attached scsi generic sg0 type 5
[ 1.918057] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 2.111541] usb 1-1: New USB device found, idVendor=5986, idProduct=0102
[ 2.111609] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.111671] usb 1-1: Product: Acer Crystal Eye webcam
[ 2.111795] usb 1-1: configuration #1 chosen from 1 choice
[ 2.399681] PM: Starting manual resume from disk
[ 2.399760] PM: Resume from partition 8:6
[ 2.399761] PM: Checking hibernation image.
[ 2.400211] PM: Error -22 checking image file
[ 2.400214] PM: Resume from disk failed.
[ 2.430983] kjournald starting. Commit interval 5 seconds
[ 2.431049] EXT3-fs: mounted filesystem with ordered data mode.
[ 2.624009] usb 6-1: new full speed USB device using uhci_hcd and address 2
[ 2.782221] usb 6-1: New USB device found, idVendor=1d09, idProduct=4000
[ 2.782283] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.782346] usb 6-1: Product: Dupont CDMA Technologies MSM
[ 2.782407] usb 6-1: Manufacturer: Dupont, Incorporated
[ 2.782547] usb 6-1: configuration #1 chosen from 1 choice
[ 3.028008] usb 7-2: new full speed USB device using uhci_hcd and address 2
[ 3.202510] usb 7-2: New USB device found, idVendor=147e, idProduct=2016
[ 3.202586] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.202649] usb 7-2: Product: Fingerprint Sensor
[ 3.202715] usb 7-2: Manufacturer: TouchStrip
[ 3.202831] usb 7-2: configuration #1 chosen from 1 choice
[ 4.233538] udev: starting version 154
[ 4.581456] ACPI: WMI: Mapper loaded
[ 4.647836] acer-wmi: Acer Laptop ACPI-WMI Extras
[ 4.648192] acer-wmi: Brightness must be controlled by generic video driver
[ 4.661698] cfg80211: Using static regulatory domain info
[ 4.661774] cfg80211: Regulatory domain: US
[ 4.661844] (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 4.661917] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 4.661980] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 4.662042] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 4.662105] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 4.662167] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 4.662230] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 4.672201] cfg80211: Calling CRDA for country: US
[ 4.787495] ACPI: SSDT 7f6bdd74 0027A (v01 PmRef Cpu0Ist 00003000
INTL 20050624)
[ 4.788150] ACPI: SSDT 7f6bd6fe 005F1 (v01 PmRef Cpu0Cst 00003001
INTL 20050624)
[ 4.797650] Monitor-Mwait will be used to enter C-1 state
[ 4.797669] Monitor-Mwait will be used to enter C-2 state
[ 4.797684] Monitor-Mwait will be used to enter C-3 state
[ 4.797689] Marking TSC unstable due to TSC halts in idle
[ 4.797823] processor LNXCPU:00: registered as cooling_device1
[ 4.798249] ACPI: SSDT 7f6bdfee 000C8 (v01 PmRef Cpu1Ist 00003000
INTL 20050624)
[ 4.798723] ACPI: SSDT 7f6bdcef 00085 (v01 PmRef Cpu1Cst 00003000
INTL 20050624)
[ 4.799748] Switching to clocksource hpet
[ 4.800394] processor LNXCPU:01: registered as cooling_device2
[ 4.837944] ACPI: AC Adapter [ADP0] (on-line)
[ 4.838783] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 4.838888] ACPI: Sleep Button [SLPB]
[ 4.839007] input: Lid Switch as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 4.839149] ACPI: Lid Switch [LID]
[ 4.839265] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 4.839366] ACPI: Power Button [PWRB]
[ 4.839477] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 4.839551] ACPI: Power Button [PWRF]
[ 4.869950] ACPI: Battery Slot [BAT0] (battery present)
[ 4.870314] ACPI: Battery Slot [BAT1] (battery absent)
[ 4.873544] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 4.908444] tpm_tis 00:0b: 1.2 TPM (device-id 0xB, rev-id 16)
[ 4.957020] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level,
low) -> IRQ 19
[ 4.957097] ACPI: I/O resource 0000:00:1f.3 [0x1c60-0x1c7f]
conflicts with ACPI region SMBI [0x1c60-0x1c6f]
[ 4.957173] ACPI: If an ACPI driver is available for this device,
you should use it instead of the native driver
[ 4.958271] yenta_cardbus 0000:0a:04.1: CardBus bridge found [1025:011a]
[ 4.993487] iwlagn: Intel(R) Wireless WiFi Link AGN driver for
Linux, 1.3.27ks
[ 4.993577] iwlagn: Copyright(c) 2003-2009 Intel Corporation
[ 4.993727] iwlagn 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 4.993817] iwlagn 0000:06:00.0: setting latency timer to 64
[ 4.993872] iwlagn 0000:06:00.0: Detected Intel Wireless WiFi Link
4965AGN REV=0x4
[ 5.045757] iwlagn 0000:06:00.0: Tunable channels: 13 802.11bg, 19
802.11a channels
[ 5.045945] iwlagn 0000:06:00.0: irq 30 for MSI/MSI-X
[ 5.089137] yenta_cardbus 0000:0a:04.1: ISA IRQ mask 0x0000, PCI irq 20
[ 5.089203] yenta_cardbus 0000:0a:04.1: Socket status: 30000410
[ 5.089270] yenta_cardbus 0000:0a:04.1: pcmcia: parent PCI bridge
I/O window: 0x6000 - 0x6fff
[ 5.089347] pcmcia_socket pcmcia_socket0: cs: IO port probe
0x6000-0x6fff: clean.
[ 5.089721] yenta_cardbus 0000:0a:04.1: pcmcia: parent PCI bridge
Memory window: 0xfc200000 - 0xfc2fffff
[ 5.089802] yenta_cardbus 0000:0a:04.1: pcmcia: parent PCI bridge
Memory window: 0x80000000 - 0x87ffffff
[ 5.090408] yenta_cardbus 0000:0a:05.0: CardBus bridge found [1025:011a]
[ 5.090517] yenta_cardbus 0000:0a:05.0: O2: res at 0x94/0xD4: 00/ea
[ 5.090580] yenta_cardbus 0000:0a:05.0: O2: enabling read
prefetch/write burst
[ 5.216986] yenta_cardbus 0000:0a:05.0: ISA IRQ mask 0x04b0, PCI irq 21
[ 5.217062] yenta_cardbus 0000:0a:05.0: Socket status: 30000006
[ 5.217130] pci_bus 0000:0a: Raising subordinate bus# of parent bus
(#0a) from #0c to #0f
[ 5.217213] yenta_cardbus 0000:0a:05.0: pcmcia: parent PCI bridge
I/O window: 0x6000 - 0x6fff
[ 5.217292] pcmcia_socket pcmcia_socket1: cs: IO port probe
0x6000-0x6fff: clean.
[ 5.217669] yenta_cardbus 0000:0a:05.0: pcmcia: parent PCI bridge
Memory window: 0xfc200000 - 0xfc2fffff
[ 5.217746] yenta_cardbus 0000:0a:05.0: pcmcia: parent PCI bridge
Memory window: 0x80000000 - 0x87ffffff
[ 5.219112] [drm] Initialized drm 1.1.0 20060810
[ 5.220521] phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 5.350444] udev: renamed network interface eth0 to eth3
[ 5.352046] usb 7-1: new full speed USB device using uhci_hcd and address 3
[ 5.353984] udev: renamed network interface wlan0 to wlan1
[ 5.383816] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.383888] i915 0000:00:02.0: setting latency timer to 64
[ 5.389089] i915 0000:00:02.0: irq 31 for MSI/MSI-X
[ 5.389096] [drm] set up 7M of stolen space
[ 5.527674] usb 7-1: New USB device found, idVendor=0a5c, idProduct=2101
[ 5.527755] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.527828] usb 7-1: Product: Acer Module
[ 5.527893] usb 7-1: Manufacturer: Broadcom Corp
[ 5.528035] usb 7-1: configuration #1 chosen from 1 choice
[ 5.534732] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x9280b1,
caps: 0xa04793/0x304000/0x0
[ 5.534810] serio: Synaptics pass-through port at isa0060/serio4/input0
[ 5.577261] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio4/input/input6
[ 5.644976] Bluetooth: Core ver 2.15
[ 5.645075] NET: Registered protocol family 31
[ 5.645138] Bluetooth: HCI device and connection manager initialized
[ 5.645211] Bluetooth: HCI socket layer initialized
[ 5.698634] Linux video capture interface: v2.00
[ 5.728244] pcmcia_socket pcmcia_socket0: pccard: PCMCIA card
inserted into slot 0
[ 5.728335] pcmcia_socket pcmcia_socket0: cs: memory probe
0xfc200000-0xfc2fffff: excluding 0xfc200000-0xfc20ffff
[ 5.736378] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 5.737669] usbcore: registered new interface driver btusb
[ 5.753284] uvcvideo: Found UVC 1.00 device Acer Crystal Eye webcam
(5986:0102)
[ 5.772894]
[ 5.773602] pcmcia 0.0: pcmcia: registering new device pcmcia0.0
[ 5.881113] [drm] initialized overlay support
[ 5.919031] input: Acer Crystal Eye webcam as
/devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/input/input7
[ 5.919253] usbcore: registered new interface driver uvcvideo
[ 5.919428] USB Video Class driver (v0.1.0)
[ 6.751423] Console: switching to colour frame buffer device 210x65
[ 6.758495] fb0: inteldrmfb frame buffer device
[ 6.758525] registered panic notifier
[ 6.758585] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 6.758699] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level,
low) -> IRQ 22
[ 6.758788] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 6.941552] hda_codec: ALC268: BIOS auto-probing.
[ 6.942469] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input8
[ 9.887745] input: PS/2 Generic Mouse as
/devices/platform/i8042/serio4/serio5/input/input9
[ 127.164184] tpm_tis 00:0b: tpm_transmit: tpm_send: error 4294967234
[ 185.321713] Adding 1951856k swap on /dev/sda6. Priority:-1
extents:1 across:1951856k
[ 185.678979] EXT3 FS on sda7, internal journal
[ 185.846190] device-mapper: uevent: version 1.0.3
[ 185.848709] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01)
initialised: dm-devel@redhat.com
[ 186.019327] loop: module loaded
[ 186.902840] EXT4-fs (sda4): warning: maximal mount count reached,
running e2fsck is recommended
[ 186.906226] EXT4-fs (sda4): mounted filesystem with ordered data mode
[ 186.954409] EXT4-fs (sda8): warning: maximal mount count reached,
running e2fsck is recommended
[ 186.957423] EXT4-fs (sda8): mounted filesystem with ordered data mode
[ 188.776081] fuse init (API version 7.13)
[ 189.550103] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 189.550106] vboxdrv: Warning: 2.6.31+ kernel detected. Most likely
the hardware performance
[ 189.550107] vboxdrv: counter framework which can generate NMIs is
active. You have to prevent
[ 189.550108] vboxdrv: the usage of hardware performance counters by
[ 189.550110] vboxdrv: echo 2 > /proc/sys/kernel/perf_counter_paranoid
[ 189.560291] vboxdrv: Found 2 processor cores.
[ 189.560436] vboxdrv: fAsync=0 offMin=0x1ad offMax=0x1398
[ 189.563004] vboxdrv: TSC mode is 'synchronous', kernel timer mode
is 'normal'.
[ 189.565627] vboxdrv: Successfully loaded version 3.2.0_OSE
(interface 0x00140001).
[ 189.739184] apm: BIOS not found.
[ 192.106467] Bluetooth: L2CAP ver 2.14
[ 192.112683] Bluetooth: L2CAP socket layer initialized
[ 192.126449] Bluetooth: RFCOMM TTY layer initialized
[ 192.128786] Bluetooth: RFCOMM socket layer initialized
[ 192.131118] Bluetooth: RFCOMM ver 1.11
[ 192.258585] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 192.264671] Bluetooth: BNEP filters: protocol multicast
[ 192.304475] Bridge firewalling registered
[ 192.318576] Bluetooth: SCO (Voice Link) ver 0.6
[ 192.320970] Bluetooth: SCO socket layer initialized
[ 194.448111] lp: driver loaded but no devices found
[ 194.497028] ppdev: user-space parallel port driver
[ 194.548525] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[ 194.604281] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[ 194.604910] ADDRCONF(NETDEV_UP): eth3: link is not ready
[ 195.038286] iwlagn 0000:06:00.0: firmware: requesting iwlwifi-4965-2.ucode
[ 195.217607] iwlagn 0000:06:00.0: loaded firmware version 228.61.2.24
[ 195.442595] Registered led device: iwl-phy0::radio
[ 195.448844] Registered led device: iwl-phy0::assoc
[ 195.455183] Registered led device: iwl-phy0::RX
[ 195.457924] Registered led device: iwl-phy0::TX
[ 195.497561] ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 240.560099] INFO: task modprobe:700 blocked for more than 120 seconds.
[ 240.560107] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs"
disables this message.
[ 240.560114] modprobe D c14b47e0 0 700 635 0x00000000
[ 240.560126] f678f300 00000086 f67abe6c c14b47e0 00000000 c1415040
c1415040 c1410604
[ 240.560141] f678f4bc c2a08040 00000001 24b6f700 00000001 00000001
00000000 00000000
[ 240.560156] c2a03604 f678f4bc fffedfd3 000007ff 00000078 00000000
00000000 000007ff
[ 240.560171] Call Trace:
[ 240.560188] [<c126cda9>] ? schedule_timeout+0x20/0xb0
[ 240.560201] [<c10f33fa>] ? sysfs_find_dirent+0x13/0x23
[ 240.560210] [<c10f3805>] ? sysfs_addrm_finish+0x13/0x199
[ 240.560218] [<c10f354f>] ? sysfs_add_one+0x11/0xb8
[ 240.560226] [<c126d588>] ? __down_common+0x7c/0xbe
[ 240.560250] [<c1047bcf>] ? down+0x1f/0x2c
[ 240.560262] [<c11b2a05>] ? __driver_attach+0x27/0x5b
[ 240.560270] [<c11b238d>] ? bus_for_each_dev+0x37/0x5f
[ 240.560280] [<c11b281d>] ? driver_attach+0x11/0x13
[ 240.560289] [<c11b29de>] ? __driver_attach+0x0/0x5b
[ 240.560297] [<c11b1e55>] ? bus_add_driver+0x99/0x1c5
[ 240.560306] [<c11b2c4f>] ? driver_register+0x87/0xe0
[ 240.560324] [<f8488318>] ? parport_pc_init+0x284/0x330 [parport_pc]
[ 240.560341] [<f8488094>] ? parport_pc_init+0x0/0x330 [parport_pc]
[ 240.560350] [<c100113e>] ? do_one_initcall+0x55/0x155
[ 240.560360] [<c1057dd9>] ? sys_init_module+0xa7/0x1d7
[ 240.560368] [<c10030fb>] ? sysenter_do_call+0x12/0x28
[ 243.856714] usbcore: registered new interface driver usbserial
[ 243.856754] USB Serial support registered for generic
[ 243.856789] usbserial_generic 6-1:1.0: generic converter detected
[ 243.857867] usb 6-1: generic converter now attached to ttyUSB0
[ 243.857890] usbserial_generic 6-1:1.1: generic converter detected
[ 243.858094] usb 6-1: generic converter now attached to ttyUSB1
[ 243.858167] usbcore: registered new interface driver usbserial_generic
[ 243.858172] usbserial: USB Serial Driver core
[ 245.958650] PPP generic driver version 2.4.2
[ 248.885292] PPP BSD Compression module registered
[ 248.913797] PPP Deflate Compression module registered
[ 249.420078] tpm_tis 00:0b: tpm_transmit: tpm_send: error 4294967234
[ 309.478757] gvfsd-metadata[3679]: segfault at 8 ip 0804d2da sp
bfde9960 error 4 in gvfsd-metadata[8048000+c000]
[ 360.560086] INFO: task modprobe:700 blocked for more than 120 seconds.
[ 360.560094] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs"
disables this message.
[ 360.560101] modprobe D c14b47e0 0 700 635 0x00000000
[ 360.560112] f678f300 00000086 f67abe6c c14b47e0 00000000 c1415040
c1415040 c1410604
[ 360.560128] f678f4bc c2a08040 00000001 24b6f700 00000001 00000001
00000000 00000000
[ 360.560143] c2a03604 f678f4bc fffedfd3 000007ff 00000078 00000000
00000000 000007ff
[ 360.560158] Call Trace:
[ 360.560177] [<c126cda9>] ? schedule_timeout+0x20/0xb0
[ 360.560189] [<c10f33fa>] ? sysfs_find_dirent+0x13/0x23
[ 360.560198] [<c10f3805>] ? sysfs_addrm_finish+0x13/0x199
[ 360.560206] [<c10f354f>] ? sysfs_add_one+0x11/0xb8
[ 360.560214] [<c126d588>] ? __down_common+0x7c/0xbe
[ 360.560261] [<c1047bcf>] ? down+0x1f/0x2c
[ 360.560277] [<c11b2a05>] ? __driver_attach+0x27/0x5b
[ 360.560285] [<c11b238d>] ? bus_for_each_dev+0x37/0x5f
[ 360.560296] [<c11b281d>] ? driver_attach+0x11/0x13
[ 360.560305] [<c11b29de>] ? __driver_attach+0x0/0x5b
[ 360.560313] [<c11b1e55>] ? bus_add_driver+0x99/0x1c5
[ 360.560323] [<c11b2c4f>] ? driver_register+0x87/0xe0
[ 360.560342] [<f8488318>] ? parport_pc_init+0x284/0x330 [parport_pc]
[ 360.560358] [<f8488094>] ? parport_pc_init+0x0/0x330 [parport_pc]
[ 360.560368] [<c100113e>] ? do_one_initcall+0x55/0x155
[ 360.560378] [<c1057dd9>] ? sys_init_module+0xa7/0x1d7
[ 360.560386] [<c10030fb>] ? sysenter_do_call+0x12/0x28
[ 370.172112] tpm_tis 00:0b: tpm_transmit: tpm_send: error 4294967234
[ 370.175858] parport_pc 00:0a: activated
[ 370.175869] parport_pc 00:0a: reported by Plug and Play ACPI
[ 370.175998] parport0: PC-style at 0x378 (0x778), irq 5 [PCSPP,TRISTATE]
[ 370.276537] lp0: using parport0 (interrupt-driven).
[ 1329.680191] CE: hpet increasing min_delta_ns to 15000 nsec
[ 2073.697086] usb 7-1: USB disconnect, address 3
[ 2073.697951] btusb_intr_complete: hci0 urb f61de500 failed to resubmit (19)
[ 2073.697970] btusb_bulk_complete: hci0 urb f61de580 failed to resubmit (19)
[ 2073.698980] btusb_bulk_complete: hci0 urb f61de400 failed to resubmit (19)
[ 2073.699188] btusb_send_frame: hci0 urb f1a39780 submission failed
[ 2074.829402] iwlagn 0000:06:00.0: RF_KILL bit toggled to disable radio.


--
blog: http://tshepang.tumblr.com



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: AANLkTilwDAk0v18kBHhrZjyzkmUPgwTTrPeRdyJUF4Ht@mail .gmail.com">http://lists.debian.org/AANLkTilwDAk0v18kBHhrZjyzkmUPgwTTrPeRdyJUF4Ht@mail .gmail.com
 

Thread Tools




All times are GMT. The time now is 12:25 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org