FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 06-02-2010, 02:45 PM
Paul Chany
 
Default Bug#584238: linux-image-2.6.32-3-486: When using USB to Ethernet nework adapter later on get error: blocked for more than 120 seconds

Package: linux-2.6
Version: 2.6.32-9
Severity: normal
Tags: squeeze

When using USB to Ethernet adapter later on get error on console:

[11531.988248] INOF: task khubd:618 blocked for more than 120 seconds.
[11531.988377] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this
message.
[11531.990656] INFO: task pegasus:1156 blocked for more than 120 seconds.
[11531.990722] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this
message.

After that I can't reconfigure anymore network, nor reboot the system with the command:
sudo shutdown -t 1 -r now
because the system hangs forever.

It is not help if I unplug and plug in again the network adapter, it is not recognised by
the kernel anymore.

-- Package-specific info:
** Version:
Linux version 2.6.32-3-486 (Debian 2.6.32-9) (maks@debian.org) (gcc version 4.3.4 (Debian 4.3.4-8) ) #1 Thu Feb 25 05:35:13 UTC 2010

** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-3-486 root=UUID=127a8e72-b9d4-4a28-8aa9-e6cdcb3985c9 ro all_generic_ide quiet

** Not tainted

** Kernel log:
[ 9.225611] PM: Error -22 checking image file
[ 9.225628] PM: Resume from disk failed.
[ 9.414135] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 9.414163] EXT3-fs: write access will be enabled during recovery.
[ 10.688535] kjournald starting. Commit interval 5 seconds
[ 10.688652] EXT3-fs: recovery complete.
[ 10.710733] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.472786] udev: starting version 154
[ 16.350029] Marking TSC unstable due to TSC halts in idle
[ 16.360220] Switching to clocksource acpi_pm
[ 16.364952] processor LNXCPU:00: registered as cooling_device1
[ 16.973885] ACPI: AC Adapter [ADP1] (on-line)
[ 17.006719] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 17.009207] ACPI: Lid Switch [LID]
[ 17.014108] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 17.016375] ACPI: Power Button [PWRF]
[ 17.061928] ACPI: Battery Slot [MBAT] (battery absent)
[ 17.171064] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 17.264959] psmouse serio1: ID: 12 02 3c
[ 17.988705] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input4
[ 18.017149] NET: Registered protocol family 23
[ 18.052666] yenta_cardbus 0000:00:13.0: CardBus bridge found [1179:0001]
[ 18.116480] parport_pc 00:0b: reported by Plug and Play ACPI
[ 18.116647] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 18.137705] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19
[ 18.137734] toshiba_acpi: HCI method: \_SB_.VALD.GHCI
[ 18.232354] yenta_cardbus 0000:00:13.0: ISA IRQ mask 0x0638, PCI irq 11
[ 18.232382] yenta_cardbus 0000:00:13.0: Socket status: 30000007
[ 18.237856] yenta_cardbus 0000:00:13.1: CardBus bridge found [1179:0001]
[ 18.365096] yenta_cardbus 0000:00:13.1: ISA IRQ mask 0x0638, PCI irq 11
[ 18.365127] yenta_cardbus 0000:00:13.1: Socket status: 30000007
[ 18.589661] donauboe 0000:00:11.0: power state changed by ACPI to D0
[ 18.673099] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 18.673147] donauboe 0000:00:11.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 18.683045] IrDA: Registered device irda0
[ 18.683071] toshoboe: Using multiple tasks
[ 19.942533] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x220-0x22f 0x330-0x337 0x388-0x38f
[ 19.943975] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[ 19.946283] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: excluding 0x220-0x22f 0x330-0x337 0x388-0x38f
[ 19.947698] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: clean.
[ 19.948699] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean.
[ 19.949502] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean.
[ 19.951565] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
[ 19.952689] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 19.953498] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 19.955555] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 22.724794] Adding 176672k swap on /dev/sda8. Priority:-1 extents:1 across:176672k
[ 23.986386] EXT3 FS on sda1, internal journal
[ 24.322216] device-mapper: uevent: version 1.0.3
[ 24.330289] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 25.052483] loop: module loaded
[ 48.955794] kjournald starting. Commit interval 5 seconds
[ 48.956308] EXT3 FS on sda6, internal journal
[ 48.956349] EXT3-fs: mounted filesystem with ordered data mode.
[ 49.174455] kjournald starting. Commit interval 5 seconds
[ 49.174926] EXT3 FS on sda7, internal journal
[ 49.174962] EXT3-fs: mounted filesystem with ordered data mode.
[ 49.432381] kjournald starting. Commit interval 5 seconds
[ 49.432966] EXT3 FS on sda5, internal journal
[ 49.433005] EXT3-fs: mounted filesystem with ordered data mode.
[ 49.665115] kjournald starting. Commit interval 5 seconds
[ 49.665786] EXT3 FS on sda9, internal journal
[ 49.665823] EXT3-fs: mounted filesystem with ordered data mode.
[ 54.377286] fuse init (API version 7.13)
[ 74.213762] Program wdm tried to access /dev/mem between 100000->102000.
[ 567.364143] usb 1-1: new full speed USB device using ohci_hcd and address 2
[ 567.582139] usb 1-1: New USB device found, idVendor=07a6, idProduct=8515
[ 567.582166] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 567.582188] usb 1-1: Product: USB To LAN Converter
[ 567.582205] usb 1-1: Manufacturer: ADMtek
[ 567.582221] usb 1-1: SerialNumber: 0001
[ 567.583936] usb 1-1: configuration #1 chosen from 1 choice
[ 571.013676] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
[ 571.045528] pegasus 1-1:1.0: setup Pegasus II specific registers
[ 571.210220] pegasus 1-1:1.0: eth0, ADMtek ADM8515 "Pegasus II" USB-2.0 Ethernet, 00:00:70:01:11:f1
[ 571.211093] usbcore: registered new interface driver pegasus
[ 574.285384] pegasus 1-1:1.0: update_eth_regs_async, status -22
[ 574.285772] pegasus 1-1:1.0: update_eth_regs_async, status -22
[ 574.285887] pegasus 1-1:1.0: update_eth_regs_async, status -22
[ 574.286411] pegasus 1-1:1.0: update_eth_regs_async, status -22
[ 578.781286] pegasus 1-1:1.0: update_eth_regs_async, status -22
[ 585.052090] eth0: no IPv6 routers present
[ 1947.028159] end_request: I/O error, dev fd0, sector 0
[ 1947.232118] end_request: I/O error, dev fd0, sector 0
[ 2105.253068] usb 1-1: USB disconnect, address 2
[ 2544.772228] usb 1-1: new full speed USB device using ohci_hcd and address 3
[ 2544.990232] usb 1-1: New USB device found, idVendor=07a6, idProduct=8515
[ 2544.990264] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2544.990287] usb 1-1: Product: USB To LAN Converter
[ 2544.990304] usb 1-1: Manufacturer: ADMtek
[ 2544.990320] usb 1-1: SerialNumber: 0001
[ 2544.991871] usb 1-1: configuration #1 chosen from 1 choice
[ 2545.028225] pegasus 1-1:1.0: setup Pegasus II specific registers
[ 2545.254633] pegasus 1-1:1.0: eth0, ADMtek ADM8515 "Pegasus II" USB-2.0 Ethernet, 00:00:70:01:11:f1
[ 2556.080650] pegasus 1-1:1.0: update_eth_regs_async, status -22
[ 2556.081018] pegasus 1-1:1.0: update_eth_regs_async, status -22
[ 2556.081132] pegasus 1-1:1.0: update_eth_regs_async, status -22
[ 2556.081408] pegasus 1-1:1.0: update_eth_regs_async, status -22
[ 2558.463393] pegasus 1-1:1.0: update_eth_regs_async, status -22
[ 2566.472084] eth0: no IPv6 routers present

** Model information
not available

** Loaded modules:
Module Size Used by
pegasus 14734 0
mii 2654 1 pegasus
fuse 42747 1
loop 9561 0
dm_crypt 9023 0
dm_mod 45901 1 dm_crypt
snd_opl3sa2 10888 1
snd_wss_lib 17401 1 snd_opl3sa2
snd_pcm_oss 28551 0
snd_mixer_oss 10473 2 snd_pcm_oss
snd_pcm 46210 2 snd_wss_lib,snd_pcm_oss
snd_page_alloc 5017 2 snd_wss_lib,snd_pcm
snd_opl3_lib 6130 1 snd_opl3sa2
snd_hwdep 4022 1 snd_opl3_lib
snd_mpu401_uart 4155 1 snd_opl3sa2
snd_seq_midi 3572 0
snd_rawmidi 12737 2 snd_mpu401_uart,snd_seq_midi
snd_seq_midi_event 3848 1 snd_seq_midi
snd_seq 35413 2 snd_seq_midi,snd_seq_midi_event
snd_timer 12292 4 snd_wss_lib,snd_pcm,snd_opl3_lib,snd_seq
snd_seq_device 3661 4 snd_opl3_lib,snd_seq_midi,snd_rawmidi,snd_seq
pcmcia 16438 0
donauboe 6996 0
snd 34102 12 snd_opl3sa2,snd_wss_lib,snd_pcm_oss,snd_mixer_oss, snd_pcm,snd_opl3_lib,snd_hwdep,snd_mpu401_uart,snd _rawmidi,snd_seq,snd_timer,snd_seq_device
toshiba_acpi 4361 0
parport_pc 15783 0
serio_raw 2912 0
yenta_socket 16335 2
irda 71654 1 donauboe
rsrc_nonstatic 7061 1 yenta_socket
parport 22170 1 parport_pc
soundcore 3294 2 snd
pcspkr 1235 0
container 1833 0
rfkill 10658 1 toshiba_acpi
battery 3774 0
crc_ccitt 1039 2 donauboe,irda
button 3578 0
ac 1628 0
psmouse 48174 0
pcmcia_core 20506 3 pcmcia,yenta_socket,rsrc_nonstatic
evdev 5520 6
processor 23235 1
ext3 92724 5
jbd 27946 1 ext3
mbcache 3482 1 ext3
sg 16463 0
ohci_hcd 17096 0
ehci_hcd 27716 0
fan 2590 0
sr_mod 10734 1
floppy 41131 0
usbcore 98034 4 pegasus,ohci_hcd,ehci_hcd
sd_mod 25733 7
cdrom 26475 1 sr_mod
thermal 9210 0
crc_t10dif 1012 1 sd_mod
nls_base 4445 1 usbcore
thermal_sys 9346 3 processor,fan,thermal
ata_generic 2011 7
libata 115918 1 ata_generic
scsi_mod 102173 4 sg,sr_mod,sd_mod,libata

** Network interface configuration:

auto lo
iface lo inet loopback

allow-hotplug eth0
iface eth0 inet dhcp

** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: irda0: <NOARP> mtu 2048 qdisc noop state DOWN qlen 8
link/irda 00:00:00:00 brd ff:ff:ff:ff
4: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:00:70:01:11:f1 brd ff:ff:ff:ff:ff:ff
inet 192.168.10.92/24 brd 192.168.10.255 scope global eth0
inet6 fe80::200:70ff:fe01:11f1/64 scope link
valid_lft forever preferred_lft forever

*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
irda0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
eth0: 179607 301 0 0 0 0 0 0 22820 231 0 0 0 0 0 0

*** Protocol statistics:
Ip:
1833 total packets received
4 with invalid addresses
0 forwarded
0 incoming packets discarded
1649 incoming packets delivered
1312 requests sent out
44 dropped because of missing route
Icmp:
0 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
Tcp:
33 active connections openings
0 passive connection openings
0 failed connection attempts
16 connection resets received
0 connections established
1363 segments received
1086 segments send out
0 segments retransmited
0 bad segments received.
27 resets sent
Udp:
213 packets received
0 packets to unknown port received.
0 packet receive errors
222 packets sent
UdpLite:
TcpExt:
1 TCP sockets finished time wait in fast timer
33 delayed acks sent
923 packets directly queued to recvmsg prequeue.
8688 bytes directly in process context from backlog
1131509 bytes directly received in process context from prequeue
275 packet headers predicted
784 packets header predicted and directly queued to user
51 acknowledgments not containing data payload received
131 predicted acknowledgments
1 connections reset due to unexpected data
16 connections reset due to early user close
IpExt:
InMcastPkts: 21
OutMcastPkts: 25
InBcastPkts: 73
InOctets: 1695218
OutOctets: 106998
InMcastOctets: 5451
OutMcastOctets: 5611
InBcastOctets: 13564

*** Device features:
eth0: 0x0
irda0: 0x0
lo: 0x13865

** PCI devices:
00:00.0 Host bridge [0600]: Toshiba America Info Systems CPU to PCI bridge [1179:0601] (rev a2)
Subsystem: Toshiba America Info Systems Satellite Pro [1179:0001]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes

00:07.0 Communication controller [0780]: Agere Systems 56k WinModem [11c1:0441] (rev 01)
Subsystem: Toshiba America Info Systems Internal V.90 Modem [1179:0001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (63000ns min, 3500ns max)
Interrupt: pin A routed to IRQ 3
Region 0: Memory at ffefff00 (32-bit, non-prefetchable) [size=256]
Region 1: I/O ports at 02f8 [size=8]
Region 2: I/O ports at 1c00 [size=256]
Capabilities: <access denied>

00:08.0 VGA compatible controller [0300]: S3 Inc. ViRGE/MX [5333:8c01] (rev 06) (prog-if 00 [VGA controller])
Subsystem: Toshiba America Info Systems ViRGE/MX [1179:0001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (1000ns min, 63750ns max)
Region 0: Memory at f8000000 (32-bit, non-prefetchable) [size=64M]
Expansion ROM at 18000000 [disabled] [size=64K]

00:0b.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 02) (prog-if 10 [OHCI])
Subsystem: Toshiba America Info Systems USB [1179:0001]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
Latency: 64 (250ns min, 5250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f7fff000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd

00:10.0 IDE interface [0101]: Toshiba America Info Systems Extended IDE Controller [1179:0102] (rev 34) (prog-if f0)
Subsystem: Toshiba America Info Systems Device [1179:0002]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 10000ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at 1800 [size=16]
Kernel driver in use: ata_generic
Kernel modules: ata_generic, ide-pci-generic

00:11.0 Communication controller [0780]: Toshiba America Info Systems FIR Port Type-O [1179:0701] (rev 23)
Subsystem: Toshiba America Info Systems Device [1179:0001]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at ffe0 [size=32]
Kernel driver in use: donauboe
Kernel modules: donauboe

00:13.0 CardBus bridge [0607]: Toshiba America Info Systems ToPIC97 [1179:060f] (rev 07)
Subsystem: Toshiba America Info Systems Satellite 4010 [1179:0001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 18010000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=01, subordinate=04, sec-latency=0
Memory window 0: 08000000-0bfff000 (prefetchable)
Memory window 1: 0c000000-0ffff000
I/O window 0: 00001000-000010ff
I/O window 1: 00001400-000014ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket

00:13.1 CardBus bridge [0607]: Toshiba America Info Systems ToPIC97 [1179:060f] (rev 07)
Subsystem: Toshiba America Info Systems Satellite 4010 [1179:0001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 11
Region 0: Memory at 18011000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=05, subordinate=08, sec-latency=0
Memory window 0: 10000000-13fff000 (prefetchable)
Memory window 1: 14000000-17fff000
I/O window 0: 00002000-000020ff
I/O window 1: 00002400-000024ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket


** USB devices:
Bus 001 Device 003: ID 07a6:8515 ADMtek, Inc. AN8515 Ethernet
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i586)

Kernel: Linux 2.6.32-3-486
Locale: LANG=hu_HU.UTF-8, LC_CTYPE=hu_HU.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-2.6.32-3-486 depends on:
ii debconf [debconf-2.0] 1.5.32 Debian configuration management sy
ii initramfs-tools [linux-initr 0.94.4 tools for generating an initramfs
ii module-init-tools 3.12~pre2-3 tools for managing Linux kernel mo

Versions of packages linux-image-2.6.32-3-486 recommends:
ii firmware-linux-free 2.6.32-9 Binary firmware for various driver

Versions of packages linux-image-2.6.32-3-486 suggests:
ii grub 0.97-61 GRand Unified Bootloader (dummy pa
pn linux-doc-2.6.32 <none> (no description available)

Versions of packages linux-image-2.6.32-3-486 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)

-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-3-486/prerm/removing-running-kernel-2.6.32-3-486: true
linux-image-2.6.32-3-486/postinst/bootloader-error-2.6.32-3-486:
linux-image-2.6.32-3-486/postinst/missing-firmware-2.6.32-3-486:
linux-image-2.6.32-3-486/postinst/bootloader-test-error-2.6.32-3-486:
linux-image-2.6.32-3-486/postinst/depmod-error-initrd-2.6.32-3-486: false
linux-image-2.6.32-3-486/prerm/would-invalidate-boot-loader-2.6.32-3-486: true



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20100602144551.2330.64473.reportbug@debian-laptop.localdomain">http://lists.debian.org/20100602144551.2330.64473.reportbug@debian-laptop.localdomain
 
Old 06-02-2010, 11:24 PM
Ben Hutchings
 
Default Bug#584238: linux-image-2.6.32-3-486: When using USB to Ethernet nework adapter later on get error: blocked for more than 120 seconds

On Wed, 2010-06-02 at 16:45 +0200, Paul Chany wrote:
> Package: linux-2.6
> Version: 2.6.32-9
> Severity: normal
> Tags: squeeze
>
> When using USB to Ethernet adapter later on get error on console:
>
> [11531.988248] INOF: task khubd:618 blocked for more than 120 seconds.
> [11531.988377] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this
> message.
> [11531.990656] INFO: task pegasus:1156 blocked for more than 120 seconds.
> [11531.990722] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this
> message.
>
> After that I can't reconfigure anymore network, nor reboot the system with the command:
> sudo shutdown -t 1 -r now
> because the system hangs forever.
>
> It is not help if I unplug and plug in again the network adapter, it is not recognised by
> the kernel anymore.

I'm forwarding this to the pegasus driver developers so they can comment
on it.

Debian kernel version 2.6.32-9 is closely based on stable kernel
2.6.32.9.

Ben.

> -- Package-specific info:
> ** Version:
> Linux version 2.6.32-3-486 (Debian 2.6.32-9) (maks@debian.org) (gcc version 4.3.4 (Debian 4.3.4-8) ) #1 Thu Feb 25 05:35:13 UTC 2010
>
> ** Command line:
> BOOT_IMAGE=/boot/vmlinuz-2.6.32-3-486 root=UUID=127a8e72-b9d4-4a28-8aa9-e6cdcb3985c9 ro all_generic_ide quiet
>
> ** Not tainted
>
> ** Kernel log:
> [ 9.225611] PM: Error -22 checking image file
> [ 9.225628] PM: Resume from disk failed.
> [ 9.414135] EXT3-fs: INFO: recovery required on readonly filesystem.
> [ 9.414163] EXT3-fs: write access will be enabled during recovery.
> [ 10.688535] kjournald starting. Commit interval 5 seconds
> [ 10.688652] EXT3-fs: recovery complete.
> [ 10.710733] EXT3-fs: mounted filesystem with ordered data mode.
> [ 14.472786] udev: starting version 154
> [ 16.350029] Marking TSC unstable due to TSC halts in idle
> [ 16.360220] Switching to clocksource acpi_pm
> [ 16.364952] processor LNXCPU:00: registered as cooling_device1
> [ 16.973885] ACPI: AC Adapter [ADP1] (on-line)
> [ 17.006719] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
> [ 17.009207] ACPI: Lid Switch [LID]
> [ 17.014108] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
> [ 17.016375] ACPI: Power Button [PWRF]
> [ 17.061928] ACPI: Battery Slot [MBAT] (battery absent)
> [ 17.171064] input: PC Speaker as /devices/platform/pcspkr/input/input3
> [ 17.264959] psmouse serio1: ID: 12 02 3c
> [ 17.988705] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input4
> [ 18.017149] NET: Registered protocol family 23
> [ 18.052666] yenta_cardbus 0000:00:13.0: CardBus bridge found [1179:0001]
> [ 18.116480] parport_pc 00:0b: reported by Plug and Play ACPI
> [ 18.116647] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
> [ 18.137705] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19
> [ 18.137734] toshiba_acpi: HCI method: \_SB_.VALD.GHCI
> [ 18.232354] yenta_cardbus 0000:00:13.0: ISA IRQ mask 0x0638, PCI irq 11
> [ 18.232382] yenta_cardbus 0000:00:13.0: Socket status: 30000007
> [ 18.237856] yenta_cardbus 0000:00:13.1: CardBus bridge found [1179:0001]
> [ 18.365096] yenta_cardbus 0000:00:13.1: ISA IRQ mask 0x0638, PCI irq 11
> [ 18.365127] yenta_cardbus 0000:00:13.1: Socket status: 30000007
> [ 18.589661] donauboe 0000:00:11.0: power state changed by ACPI to D0
> [ 18.673099] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
> [ 18.673147] donauboe 0000:00:11.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
> [ 18.683045] IrDA: Registered device irda0
> [ 18.683071] toshoboe: Using multiple tasks
> [ 19.942533] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x220-0x22f 0x330-0x337 0x388-0x38f
> [ 19.943975] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
> [ 19.946283] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: excluding 0x220-0x22f 0x330-0x337 0x388-0x38f
> [ 19.947698] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: clean.
> [ 19.948699] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean.
> [ 19.949502] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean.
> [ 19.951565] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
> [ 19.952689] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
> [ 19.953498] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
> [ 19.955555] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
> [ 22.724794] Adding 176672k swap on /dev/sda8. Priority:-1 extents:1 across:176672k
> [ 23.986386] EXT3 FS on sda1, internal journal
> [ 24.322216] device-mapper: uevent: version 1.0.3
> [ 24.330289] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
> [ 25.052483] loop: module loaded
> [ 48.955794] kjournald starting. Commit interval 5 seconds
> [ 48.956308] EXT3 FS on sda6, internal journal
> [ 48.956349] EXT3-fs: mounted filesystem with ordered data mode.
> [ 49.174455] kjournald starting. Commit interval 5 seconds
> [ 49.174926] EXT3 FS on sda7, internal journal
> [ 49.174962] EXT3-fs: mounted filesystem with ordered data mode.
> [ 49.432381] kjournald starting. Commit interval 5 seconds
> [ 49.432966] EXT3 FS on sda5, internal journal
> [ 49.433005] EXT3-fs: mounted filesystem with ordered data mode.
> [ 49.665115] kjournald starting. Commit interval 5 seconds
> [ 49.665786] EXT3 FS on sda9, internal journal
> [ 49.665823] EXT3-fs: mounted filesystem with ordered data mode.
> [ 54.377286] fuse init (API version 7.13)
> [ 74.213762] Program wdm tried to access /dev/mem between 100000->102000.
> [ 567.364143] usb 1-1: new full speed USB device using ohci_hcd and address 2
> [ 567.582139] usb 1-1: New USB device found, idVendor=07a6, idProduct=8515
> [ 567.582166] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> [ 567.582188] usb 1-1: Product: USB To LAN Converter
> [ 567.582205] usb 1-1: Manufacturer: ADMtek
> [ 567.582221] usb 1-1: SerialNumber: 0001
> [ 567.583936] usb 1-1: configuration #1 chosen from 1 choice
> [ 571.013676] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
> [ 571.045528] pegasus 1-1:1.0: setup Pegasus II specific registers
> [ 571.210220] pegasus 1-1:1.0: eth0, ADMtek ADM8515 "Pegasus II" USB-2.0 Ethernet, 00:00:70:01:11:f1
> [ 571.211093] usbcore: registered new interface driver pegasus
> [ 574.285384] pegasus 1-1:1.0: update_eth_regs_async, status -22
> [ 574.285772] pegasus 1-1:1.0: update_eth_regs_async, status -22
> [ 574.285887] pegasus 1-1:1.0: update_eth_regs_async, status -22
> [ 574.286411] pegasus 1-1:1.0: update_eth_regs_async, status -22
> [ 578.781286] pegasus 1-1:1.0: update_eth_regs_async, status -22
> [ 585.052090] eth0: no IPv6 routers present
> [ 1947.028159] end_request: I/O error, dev fd0, sector 0
> [ 1947.232118] end_request: I/O error, dev fd0, sector 0
> [ 2105.253068] usb 1-1: USB disconnect, address 2
> [ 2544.772228] usb 1-1: new full speed USB device using ohci_hcd and address 3
> [ 2544.990232] usb 1-1: New USB device found, idVendor=07a6, idProduct=8515
> [ 2544.990264] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> [ 2544.990287] usb 1-1: Product: USB To LAN Converter
> [ 2544.990304] usb 1-1: Manufacturer: ADMtek
> [ 2544.990320] usb 1-1: SerialNumber: 0001
> [ 2544.991871] usb 1-1: configuration #1 chosen from 1 choice
> [ 2545.028225] pegasus 1-1:1.0: setup Pegasus II specific registers
> [ 2545.254633] pegasus 1-1:1.0: eth0, ADMtek ADM8515 "Pegasus II" USB-2.0 Ethernet, 00:00:70:01:11:f1
> [ 2556.080650] pegasus 1-1:1.0: update_eth_regs_async, status -22
> [ 2556.081018] pegasus 1-1:1.0: update_eth_regs_async, status -22
> [ 2556.081132] pegasus 1-1:1.0: update_eth_regs_async, status -22
> [ 2556.081408] pegasus 1-1:1.0: update_eth_regs_async, status -22
> [ 2558.463393] pegasus 1-1:1.0: update_eth_regs_async, status -22
> [ 2566.472084] eth0: no IPv6 routers present
>
> ** Model information
> not available
>
> ** Loaded modules:
> Module Size Used by
> pegasus 14734 0
> mii 2654 1 pegasus
> fuse 42747 1
> loop 9561 0
> dm_crypt 9023 0
> dm_mod 45901 1 dm_crypt
> snd_opl3sa2 10888 1
> snd_wss_lib 17401 1 snd_opl3sa2
> snd_pcm_oss 28551 0
> snd_mixer_oss 10473 2 snd_pcm_oss
> snd_pcm 46210 2 snd_wss_lib,snd_pcm_oss
> snd_page_alloc 5017 2 snd_wss_lib,snd_pcm
> snd_opl3_lib 6130 1 snd_opl3sa2
> snd_hwdep 4022 1 snd_opl3_lib
> snd_mpu401_uart 4155 1 snd_opl3sa2
> snd_seq_midi 3572 0
> snd_rawmidi 12737 2 snd_mpu401_uart,snd_seq_midi
> snd_seq_midi_event 3848 1 snd_seq_midi
> snd_seq 35413 2 snd_seq_midi,snd_seq_midi_event
> snd_timer 12292 4 snd_wss_lib,snd_pcm,snd_opl3_lib,snd_seq
> snd_seq_device 3661 4 snd_opl3_lib,snd_seq_midi,snd_rawmidi,snd_seq
> pcmcia 16438 0
> donauboe 6996 0
> snd 34102 12 snd_opl3sa2,snd_wss_lib,snd_pcm_oss,snd_mixer_oss, snd_pcm,snd_opl3_lib,snd_hwdep,snd_mpu401_uart,snd _rawmidi,snd_seq,snd_timer,snd_seq_device
> toshiba_acpi 4361 0
> parport_pc 15783 0
> serio_raw 2912 0
> yenta_socket 16335 2
> irda 71654 1 donauboe
> rsrc_nonstatic 7061 1 yenta_socket
> parport 22170 1 parport_pc
> soundcore 3294 2 snd
> pcspkr 1235 0
> container 1833 0
> rfkill 10658 1 toshiba_acpi
> battery 3774 0
> crc_ccitt 1039 2 donauboe,irda
> button 3578 0
> ac 1628 0
> psmouse 48174 0
> pcmcia_core 20506 3 pcmcia,yenta_socket,rsrc_nonstatic
> evdev 5520 6
> processor 23235 1
> ext3 92724 5
> jbd 27946 1 ext3
> mbcache 3482 1 ext3
> sg 16463 0
> ohci_hcd 17096 0
> ehci_hcd 27716 0
> fan 2590 0
> sr_mod 10734 1
> floppy 41131 0
> usbcore 98034 4 pegasus,ohci_hcd,ehci_hcd
> sd_mod 25733 7
> cdrom 26475 1 sr_mod
> thermal 9210 0
> crc_t10dif 1012 1 sd_mod
> nls_base 4445 1 usbcore
> thermal_sys 9346 3 processor,fan,thermal
> ata_generic 2011 7
> libata 115918 1 ata_generic
> scsi_mod 102173 4 sg,sr_mod,sd_mod,libata
>
> ** Network interface configuration:
>
> auto lo
> iface lo inet loopback
>
> allow-hotplug eth0
> iface eth0 inet dhcp
>
> ** Network status:
> *** IP interfaces and addresses:
> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
> link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
> inet 127.0.0.1/8 scope host lo
> inet6 ::1/128 scope host
> valid_lft forever preferred_lft forever
> 2: irda0: <NOARP> mtu 2048 qdisc noop state DOWN qlen 8
> link/irda 00:00:00:00 brd ff:ff:ff:ff
> 4: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
> link/ether 00:00:70:01:11:f1 brd ff:ff:ff:ff:ff:ff
> inet 192.168.10.92/24 brd 192.168.10.255 scope global eth0
> inet6 fe80::200:70ff:fe01:11f1/64 scope link
> valid_lft forever preferred_lft forever
>
> *** Device statistics:
> Inter-| Receive | Transmit
> face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
> lo: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
> irda0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
> eth0: 179607 301 0 0 0 0 0 0 22820 231 0 0 0 0 0 0
>
> *** Protocol statistics:
> Ip:
> 1833 total packets received
> 4 with invalid addresses
> 0 forwarded
> 0 incoming packets discarded
> 1649 incoming packets delivered
> 1312 requests sent out
> 44 dropped because of missing route
> Icmp:
> 0 ICMP messages received
> 0 input ICMP message failed.
> ICMP input histogram:
> 0 ICMP messages sent
> 0 ICMP messages failed
> ICMP output histogram:
> Tcp:
> 33 active connections openings
> 0 passive connection openings
> 0 failed connection attempts
> 16 connection resets received
> 0 connections established
> 1363 segments received
> 1086 segments send out
> 0 segments retransmited
> 0 bad segments received.
> 27 resets sent
> Udp:
> 213 packets received
> 0 packets to unknown port received.
> 0 packet receive errors
> 222 packets sent
> UdpLite:
> TcpExt:
> 1 TCP sockets finished time wait in fast timer
> 33 delayed acks sent
> 923 packets directly queued to recvmsg prequeue.
> 8688 bytes directly in process context from backlog
> 1131509 bytes directly received in process context from prequeue
> 275 packet headers predicted
> 784 packets header predicted and directly queued to user
> 51 acknowledgments not containing data payload received
> 131 predicted acknowledgments
> 1 connections reset due to unexpected data
> 16 connections reset due to early user close
> IpExt:
> InMcastPkts: 21
> OutMcastPkts: 25
> InBcastPkts: 73
> InOctets: 1695218
> OutOctets: 106998
> InMcastOctets: 5451
> OutMcastOctets: 5611
> InBcastOctets: 13564
>
> *** Device features:
> eth0: 0x0
> irda0: 0x0
> lo: 0x13865
>
> ** PCI devices:
> 00:00.0 Host bridge [0600]: Toshiba America Info Systems CPU to PCI bridge [1179:0601] (rev a2)
> Subsystem: Toshiba America Info Systems Satellite Pro [1179:0001]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 32 bytes
>
> 00:07.0 Communication controller [0780]: Agere Systems 56k WinModem [11c1:0441] (rev 01)
> Subsystem: Toshiba America Info Systems Internal V.90 Modem [1179:0001]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0 (63000ns min, 3500ns max)
> Interrupt: pin A routed to IRQ 3
> Region 0: Memory at ffefff00 (32-bit, non-prefetchable) [size=256]
> Region 1: I/O ports at 02f8 [size=8]
> Region 2: I/O ports at 1c00 [size=256]
> Capabilities: <access denied>
>
> 00:08.0 VGA compatible controller [0300]: S3 Inc. ViRGE/MX [5333:8c01] (rev 06) (prog-if 00 [VGA controller])
> Subsystem: Toshiba America Info Systems ViRGE/MX [1179:0001]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0 (1000ns min, 63750ns max)
> Region 0: Memory at f8000000 (32-bit, non-prefetchable) [size=64M]
> Expansion ROM at 18000000 [disabled] [size=64K]
>
> 00:0b.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 02) (prog-if 10 [OHCI])
> Subsystem: Toshiba America Info Systems USB [1179:0001]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
> Latency: 64 (250ns min, 5250ns max)
> Interrupt: pin A routed to IRQ 11
> Region 0: Memory at f7fff000 (32-bit, non-prefetchable) [size=4K]
> Kernel driver in use: ohci_hcd
> Kernel modules: ohci-hcd
>
> 00:10.0 IDE interface [0101]: Toshiba America Info Systems Extended IDE Controller [1179:0102] (rev 34) (prog-if f0)
> Subsystem: Toshiba America Info Systems Device [1179:0002]
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64 (500ns min, 10000ns max)
> Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
> Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
> Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
> Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
> Region 4: I/O ports at 1800 [size=16]
> Kernel driver in use: ata_generic
> Kernel modules: ata_generic, ide-pci-generic
>
> 00:11.0 Communication controller [0780]: Toshiba America Info Systems FIR Port Type-O [1179:0701] (rev 23)
> Subsystem: Toshiba America Info Systems Device [1179:0001]
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64
> Interrupt: pin A routed to IRQ 11
> Region 0: I/O ports at ffe0 [size=32]
> Kernel driver in use: donauboe
> Kernel modules: donauboe
>
> 00:13.0 CardBus bridge [0607]: Toshiba America Info Systems ToPIC97 [1179:060f] (rev 07)
> Subsystem: Toshiba America Info Systems Satellite 4010 [1179:0001]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 11
> Region 0: Memory at 18010000 (32-bit, non-prefetchable) [size=4K]
> Bus: primary=00, secondary=01, subordinate=04, sec-latency=0
> Memory window 0: 08000000-0bfff000 (prefetchable)
> Memory window 1: 0c000000-0ffff000
> I/O window 0: 00001000-000010ff
> I/O window 1: 00001400-000014ff
> BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
> 16-bit legacy interface ports at 0001
> Kernel driver in use: yenta_cardbus
> Kernel modules: yenta_socket
>
> 00:13.1 CardBus bridge [0607]: Toshiba America Info Systems ToPIC97 [1179:060f] (rev 07)
> Subsystem: Toshiba America Info Systems Satellite 4010 [1179:0001]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin B routed to IRQ 11
> Region 0: Memory at 18011000 (32-bit, non-prefetchable) [size=4K]
> Bus: primary=00, secondary=05, subordinate=08, sec-latency=0
> Memory window 0: 10000000-13fff000 (prefetchable)
> Memory window 1: 14000000-17fff000
> I/O window 0: 00002000-000020ff
> I/O window 1: 00002400-000024ff
> BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
> 16-bit legacy interface ports at 0001
> Kernel driver in use: yenta_cardbus
> Kernel modules: yenta_socket
>
>
> ** USB devices:
> Bus 001 Device 003: ID 07a6:8515 ADMtek, Inc. AN8515 Ethernet
> Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>
>
> -- System Information:
> Debian Release: squeeze/sid
> APT prefers testing
> APT policy: (500, 'testing')
> Architecture: i386 (i586)
>
> Kernel: Linux 2.6.32-3-486
> Locale: LANG=hu_HU.UTF-8, LC_CTYPE=hu_HU.UTF-8 (charmap=UTF-8)
> Shell: /bin/sh linked to /bin/dash
>
> Versions of packages linux-image-2.6.32-3-486 depends on:
> ii debconf [debconf-2.0] 1.5.32 Debian configuration management sy
> ii initramfs-tools [linux-initr 0.94.4 tools for generating an initramfs
> ii module-init-tools 3.12~pre2-3 tools for managing Linux kernel mo
>
> Versions of packages linux-image-2.6.32-3-486 recommends:
> ii firmware-linux-free 2.6.32-9 Binary firmware for various driver
>
> Versions of packages linux-image-2.6.32-3-486 suggests:
> ii grub 0.97-61 GRand Unified Bootloader (dummy pa
> pn linux-doc-2.6.32 <none> (no description available)
>
> Versions of packages linux-image-2.6.32-3-486 is related to:
> pn firmware-bnx2 <none> (no description available)
> pn firmware-bnx2x <none> (no description available)
> pn firmware-ipw2x00 <none> (no description available)
> pn firmware-ivtv <none> (no description available)
> pn firmware-iwlwifi <none> (no description available)
> pn firmware-linux <none> (no description available)
> pn firmware-linux-nonfree <none> (no description available)
> pn firmware-qlogic <none> (no description available)
> pn firmware-ralink <none> (no description available)
>
> -- debconf information:
> shared/kernel-image/really-run-bootloader: true
> linux-image-2.6.32-3-486/prerm/removing-running-kernel-2.6.32-3-486: true
> linux-image-2.6.32-3-486/postinst/bootloader-error-2.6.32-3-486:
> linux-image-2.6.32-3-486/postinst/missing-firmware-2.6.32-3-486:
> linux-image-2.6.32-3-486/postinst/bootloader-test-error-2.6.32-3-486:
> linux-image-2.6.32-3-486/postinst/depmod-error-initrd-2.6.32-3-486: false
> linux-image-2.6.32-3-486/prerm/would-invalidate-boot-loader-2.6.32-3-486: true
>
>
>

--
Ben Hutchings
Once a job is fouled up, anything done to improve it makes it worse.
 
Old 06-09-2010, 01:15 PM
Paul Chany
 
Default Bug#584238: linux-image-2.6.32-3-486: When using USB to Ethernet nework adapter later on get error: blocked for more than 120 seconds

Ben Hutchings <ben@decadent.org.uk> writes:

> On Wed, 2010-06-02 at 16:45 +0200, Paul Chany wrote:
>> Package: linux-2.6
>> Version: 2.6.32-9
>> Severity: normal
>> Tags: squeeze
>>
>> When using USB to Ethernet adapter later on get error on console:
>>
>> [11531.988248] INOF: task khubd:618 blocked for more than 120 seconds.
>> [11531.988377] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this
>> message.
>> [11531.990656] INFO: task pegasus:1156 blocked for more than 120 seconds.
>> [11531.990722] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this
>> message.
>>
>> After that I can't reconfigure anymore network, nor reboot the system with the command:
>> sudo shutdown -t 1 -r now
>> because the system hangs forever.
>>
>> It is not help if I unplug and plug in again the network adapter, it is not recognised by
>> the kernel anymore.
>
> I'm forwarding this to the pegasus driver developers so they can comment
> on it.
>
> Debian kernel version 2.6.32-9 is closely based on stable kernel
> 2.6.32.9.

It seems that the developers dont' responds for this bugreport at all.
Is the pegasus kernel driver a dead project now?
There in their projectpage: http://pegasus2.sourceforge.net/
one can see that that pegasus is available
only for kernels 2.4 and 2.5 but not for 2.6, right?

In the meantime I can to reboot every hour or so because of this buggish
driver.

--
Regards,
Paul Chany
You can freely correct my English.
http://csanyi-pal.info



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 87aar4e49d.fsf@debian-laptop.localdomain">http://lists.debian.org/87aar4e49d.fsf@debian-laptop.localdomain
 
Old 06-09-2010, 01:39 PM
zoltan herman
 
Default Bug#584238: linux-image-2.6.32-3-486: When using USB to Ethernet nework adapter later on get error: blocked for more than 120 seconds

Tisztelt Pál!

*** Nekem is van gondom a kernel usb oldalával, de nem a hálózattal van gond
( egy tp-link usb wifi eszközöm van, annak van a kernelben saját modulja).
Ez a hiba nálam akkor jelentkezett, amikor egy 5 portos PCI-os usb hubra

rátettem az usb-s egeret és bedugtam egy 8Gb-os pendrive-ot.
De ez még a 2.6.29-es kernelnél volt, a 2.6.32 felettieknél már nem jelentkezett.

Üdvözlettel:
Herman Zoltán


2010/6/9 Paul Chany <csanyipal@gmail.com>

Ben Hutchings <ben@decadent.org.uk> writes:




> On Wed, 2010-06-02 at 16:45 +0200, Paul Chany wrote:

>> Package: linux-2.6

>> Version: 2.6.32-9

>> Severity: normal

>> Tags: squeeze

>>

>> When using USB to Ethernet adapter later on get error on console:

>>

>> [11531.988248] INOF: task khubd:618 blocked for more than 120 seconds.

>> [11531.988377] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this

>> message.

>> [11531.990656] INFO: task pegasus:1156 blocked for more than 120 seconds.

>> [11531.990722] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this

>> message.

>>

>> After that I can't reconfigure anymore network, nor reboot the system with the command:

>> sudo shutdown -t 1 -r now

>> because the system hangs forever.

>>

>> It is not help if I unplug and plug in again the network adapter, it is not recognised by

>> the kernel anymore.

>

> I'm forwarding this to the pegasus driver developers so they can comment

> on it.

>

> Debian kernel version 2.6.32-9 is closely based on stable kernel

> 2.6.32.9.



It seems that the developers dont' responds for this bugreport at all.

Is the pegasus kernel driver a dead project now?

There in their projectpage: http://pegasus2.sourceforge.net/

one can see that that pegasus is available

only for kernels 2.4 and 2.5 but not for 2.6, right?



In the meantime I can to reboot every hour or so because of this buggish

driver.



--

Regards,

Paul Chany

You can freely correct my English.

http://csanyi-pal.info







--

To UNSUBSCRIBE, email to debian-bugs-dist-REQUEST@lists.debian.org

with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 
Old 06-10-2010, 06:49 AM
Petko Manolov
 
Default Bug#584238: linux-image-2.6.32-3-486: When using USB to Ethernet nework adapter later on get error: blocked for more than 120 seconds

The project ain't dead yet, i has moved into the mainline long time ago.


Petko


On Wed, 9 Jun 2010, Paul Chany wrote:


Ben Hutchings <ben@decadent.org.uk> writes:


On Wed, 2010-06-02 at 16:45 +0200, Paul Chany wrote:

Package: linux-2.6
Version: 2.6.32-9
Severity: normal
Tags: squeeze

When using USB to Ethernet adapter later on get error on console:

[11531.988248] INOF: task khubd:618 blocked for more than 120 seconds.
[11531.988377] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this
message.
[11531.990656] INFO: task pegasus:1156 blocked for more than 120 seconds.
[11531.990722] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this
message.

After that I can't reconfigure anymore network, nor reboot the system with the command:
sudo shutdown -t 1 -r now
because the system hangs forever.

It is not help if I unplug and plug in again the network adapter, it is not recognised by
the kernel anymore.


I'm forwarding this to the pegasus driver developers so they can comment
on it.

Debian kernel version 2.6.32-9 is closely based on stable kernel
2.6.32.9.


It seems that the developers dont' responds for this bugreport at all.
Is the pegasus kernel driver a dead project now?
There in their projectpage: http://pegasus2.sourceforge.net/
one can see that that pegasus is available
only for kernels 2.4 and 2.5 but not for 2.6, right?

In the meantime I can to reboot every hour or so because of this buggish
driver.

--
Regards,
Paul Chany
You can freely correct my English.
http://csanyi-pal.info





--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: alpine.DEB.2.00.1006100948380.2033@bender.nucleusy s.com">http://lists.debian.org/alpine.DEB.2.00.1006100948380.2033@bender.nucleusy s.com
 

Thread Tools




All times are GMT. The time now is 12:41 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright ©2007 - 2008, www.linux-archive.org