Package: linux-2.6
Version: 2.6.32-9
Severity: important
File: linux-image-2.6.32
Tags: squeeze



A patch for a kernel bug that eats 25% of the cpu resources in machines
with
hda intel is available http://marc.info/?l=linux-
kernel&m=126177838017002&w=4
and is applied to the mainline kernel 2.6.34
As I know, version 2.6.32 will be in squeeze at release time and is affected
by this bug, please apply the patch to it.




-- Package-specific info:
** Version:
Linux version 2.6.32-3-686 (Debian 2.6.32-9) (maks@debian.org) (gcc
version 4.3.4 (Debian 4.3.4-8) ) #1 SMP Thu Feb 25 06:14:20 UTC 2010

** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-3-686
root=UUID=2f835e28-115a-4a19-9868-936d2fea1d5b ro quiet

** Tainted: P (1)
* Proprietary module has been loaded.

** Kernel log:
[21848.811398] scsi23 : SCSI emulation for USB Mass Storage devices
[21848.811728] usb-storage: device found at 8
[21848.811733] usb-storage: waiting for device to settle before scanning
[21849.928170] usb 4-3: new full speed USB device using ohci_hcd and
address 31
[21850.112593] usb 4-3: device descriptor read/64, error -62
[21850.400067] usb 4-3: device descriptor read/64, error -62
[21850.680151] usb 4-3: new full speed USB device using ohci_hcd and
address 32
[21850.860141] usb 4-3: device descriptor read/64, error -62
[21851.144092] usb 4-3: device descriptor read/64, error -62
[21851.424151] usb 4-3: new full speed USB device using ohci_hcd and
address 33
[21851.832138] usb 4-3: device not accepting address 33, error -62
[21852.008190] usb 4-3: new full speed USB device using ohci_hcd and
address 34
[21852.416134] usb 4-3: device not accepting address 34, error -62
[21852.416181] hub 4-0:1.0: unable to enumerate USB device on port 3
[21852.684158] usb 4-3: new full speed USB device using ohci_hcd and
address 35
[21852.868082] usb 4-3: device descriptor read/64, error -62
[21853.156576] usb 4-3: device descriptor read/64, error -62
[21853.436674] usb 4-3: new full speed USB device using ohci_hcd and
address 36
[21853.620092] usb 4-3: device descriptor read/64, error -62
[21853.839453] usb-storage: device scan complete
[21853.904178] usb 4-3: device descriptor read/64, error -62
[21854.240679] usb 4-3: new full speed USB device using ohci_hcd and
address 37
[21854.648130] usb 4-3: device not accepting address 37, error -62
[21854.824157] usb 4-3: new full speed USB device using ohci_hcd and
address 38
[21855.232090] usb 4-3: device not accepting address 38, error -62
[21855.232143] hub 4-0:1.0: unable to enumerate USB device on port 3
[21855.232307] usb 2-1: USB disconnect, address 8
[21855.500095] usb 4-3: new full speed USB device using ohci_hcd and
address 39
[21855.680077] usb 4-3: device descriptor read/64, error -62
[21855.964144] usb 4-3: device descriptor read/64, error -62
[21856.244104] usb 4-3: new full speed USB device using ohci_hcd and
address 40
[21856.424084] usb 4-3: device descriptor read/64, error -62
[21856.708147] usb 4-3: device descriptor read/64, error -62
[21856.988085] usb 4-3: new full speed USB device using ohci_hcd and
address 41
[21857.396128] usb 4-3: device not accepting address 41, error -62
[21857.572151] usb 4-3: new full speed USB device using ohci_hcd and
address 42
[21857.980079] usb 4-3: device not accepting address 42, error -62
[21857.980136] hub 4-0:1.0: unable to enumerate USB device on port 3
[21858.248157] usb 4-3: new full speed USB device using ohci_hcd and
address 43
[21858.432142] usb 4-3: device descriptor read/64, error -62
[21858.716074] usb 4-3: device descriptor read/64, error -62
[21858.996128] usb 4-3: new full speed USB device using ohci_hcd and
address 44
[21859.176093] usb 4-3: device descriptor read/64, error -62
[21859.460153] usb 4-3: device descriptor read/64, error -62
[21859.740153] usb 4-3: new full speed USB device using ohci_hcd and
address 45
[21860.148080] usb 4-3: device not accepting address 45, error -62
[21860.324096] usb 4-3: new full speed USB device using ohci_hcd and
address 46
[21860.732078] usb 4-3: device not accepting address 46, error -62
[21860.732113] hub 4-0:1.0: unable to enumerate USB device on port 3
[21860.972052] usb 2-1: new high speed USB device using ehci_hcd and
address 9
[21861.117372] usb 2-1: New USB device found, idVendor=12d1,
idProduct=140c
[21861.117384] usb 2-1: New USB device strings: Mfr=2, Product=1,
SerialNumber=0
[21861.117394] usb 2-1: Product: HUAWEI Mobile
[21861.117401] usb 2-1: Manufacturer: HUAWEI Technology
[21861.117677] usb 2-1: configuration #1 chosen from 1 choice
[21861.128191] option 2-1:1.0: GSM modem (1-port) converter detected
[21861.128625] usb 2-1: GSM modem (1-port) converter now attached to
ttyUSB0
[21861.136194] option 2-1:1.1: GSM modem (1-port) converter detected
[21861.136486] usb 2-1: GSM modem (1-port) converter now attached to
ttyUSB1
[21861.140658] option 2-1:1.2: GSM modem (1-port) converter detected
[21861.140921] usb 2-1: GSM modem (1-port) converter now attached to
ttyUSB2
[21861.144618] option 2-1:1.3: GSM modem (1-port) converter detected
[21861.144852] usb 2-1: GSM modem (1-port) converter now attached to
ttyUSB3
[21861.155454] scsi28 : SCSI emulation for USB Mass Storage devices
[21861.156680] usb-storage: device found at 9
[21861.156687] usb-storage: waiting for device to settle before scanning
[21861.158599] scsi29 : SCSI emulation for USB Mass Storage devices
[21861.163046] usb-storage: device found at 9
[21861.163054] usb-storage: waiting for device to settle before scanning
[21861.340084] usb 4-3: new full speed USB device using ohci_hcd and
address 47
[21861.524095] usb 4-3: device descriptor read/64, error -62
[21861.812285] usb 4-3: device descriptor read/64, error -62
[21862.092059] usb 4-3: new full speed USB device using ohci_hcd and
address 48
[21862.272108] usb 4-3: device descriptor read/64, error -62
[21862.556103] usb 4-3: device descriptor read/64, error -62
[21862.836099] usb 4-3: new full speed USB device using ohci_hcd and
address 49
[21863.244076] usb 4-3: device not accepting address 49, error -62
[21863.420095] usb 4-3: new full speed USB device using ohci_hcd and
address 50
[21863.828084] usb 4-3: device not accepting address 50, error -62
[21863.828132] hub 4-0:1.0: unable to enumerate USB device on port 3
[21864.096111] usb 4-3: new full speed USB device using ohci_hcd and
address 51
[21864.280094] usb 4-3: device descriptor read/64, error -62
[21864.564065] usb 4-3: device descriptor read/64, error -62
[21864.844088] usb 4-3: new full speed USB device using ohci_hcd and
address 52
[21865.024122] usb 4-3: device descriptor read/64, error -62
[21865.312094] usb 4-3: device descriptor read/64, error -62
[21865.592085] usb 4-3: new full speed USB device using ohci_hcd and
address 53
[21866.000086] usb 4-3: device not accepting address 53, error -62
[21866.160914] usb-storage: device scan complete
[21866.162732] scsi 28:0:0:0: CD-ROM HUAWEI Mass Storage
2.31 PQ: 0 ANSI: 2
[21866.169513] usb-storage: device scan complete
[21866.172634] scsi 29:0:0:0: Direct-Access HUAWEI MMC Storage
2.31 PQ: 0 ANSI: 2
[21866.176165] usb 4-3: new full speed USB device using ohci_hcd and
address 54
[21866.192186] sr0: scsi-1 drive
[21866.192566] sr 28:0:0:0: Attached scsi CD-ROM sr0
[21866.192803] sr 28:0:0:0: Attached scsi generic sg1 type 5
[21866.193376] sd 29:0:0:0: Attached scsi generic sg2 type 0
[21866.221077] sd 29:0:0:0: [sdb] Attached SCSI removable disk
[21866.584090] usb 4-3: device not accepting address 54, error -62
[21866.584125] hub 4-0:1.0: unable to enumerate USB device on port 3

** Model information
not available

** Loaded modules:
Module Size Used by
cpufreq_stats 1940 0
ppp_deflate 2790 0
zlib_deflate 15822 1 ppp_deflate
bsd_comp 4120 0
ppp_async 5305 1
crc_ccitt 1039 1 ppp_async
ppp_generic 16359 7 ppp_deflate,bsd_comp,ppp_async
slhc 3691 1 ppp_generic
sg 15964 0
sr_mod 10770 0
cdrom 26487 1 sr_mod
option 13211 1
usbserial 21843 4 option
usb_storage 29805 0
sco 5837 0
bridge 32983 0
stp 996 1 bridge
bnep 7444 0
rfcomm 25131 0
l2cap 21677 4 bnep,rfcomm
fuse 43750 1
loop 9753 0
snd_hda_codec_nvhdmi 2567 1
snd_hda_codec_idt 35245 1
snd_hda_intel 16427 5
snd_hda_codec 46002 3
snd_hda_codec_nvhdmi,snd_hda_codec_idt,snd_hda_int el
arc4 974 2
snd_hwdep 4054 1 snd_hda_codec
ecb 1405 2
snd_pcm_oss 28671 0
snd_mixer_oss 10461 1 snd_pcm_oss
b43 132479 0
snd_pcm 47362 4 snd_hda_intel,snd_hda_codec,snd_pcm_oss
rng_core 2178 1 b43
snd_seq_midi 3576 0
snd_rawmidi 12505 1 snd_seq_midi
mac80211 122750 1 b43
snd_seq_midi_event 3684 1 snd_seq_midi
nvidia 9820792 40
snd_seq 35459 2 snd_seq_midi,snd_seq_midi_event
btusb 7997 0
cfg80211 87581 2 b43,mac80211
uvcvideo 45194 0
bluetooth 36327 5 sco,bnep,rfcomm,l2cap,btusb
snd_timer 12258 3 snd_pcm,snd_seq
videodev 25541 1 uvcvideo
v4l1_compat 10250 2 uvcvideo,videodev
snd_seq_device 3673 3 snd_seq_midi,snd_rawmidi,snd_seq
rfkill 10260 2 cfg80211,bluetooth
agpgart 19516 1 nvidia
snd 34363 19
snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_ hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmid i,snd_seq,snd_timer,snd_seq_device
shpchp 21220 0
i2c_nforce2 4464 0
video 14605 0
soundcore 3450 1 snd
psmouse 44413 0
i2c_core 12648 3 nvidia,videodev,i2c_nforce2
output 1204 1 video
led_class 1757 1 b43
pci_hotplug 18065 1 shpchp
wmi 3575 0
battery 3782 0
snd_page_alloc 5041 2 snd_hda_intel,snd_pcm
serio_raw 2916 0
pcspkr 1207 0
evdev 5609 21
ac 1640 0
button 3598 0
processor 26571 2
ext4 254909 1
mbcache 3762 1 ext4
jbd2 56059 1 ext4
crc16 1027 2 l2cap,ext4
sd_mod 25781 3
crc_t10dif 1012 1 sd_mod
ohci_hcd 16904 0
ssb 33443 1 b43
ahci 26966 2
mmc_core 38491 2 b43,ssb
libata 114408 1 ahci
pcmcia 17442 2 b43,ssb
thermal 9206 0
forcedeth 40773 0
pcmcia_core 20446 3 b43,ssb,pcmcia
ehci_hcd 27574 0
scsi_mod 101297 5 sg,sr_mod,usb_storage,sd_mod,libata
usbcore 98126 8
option,usbserial,usb_storage,btusb,uvcvideo,ohci_h cd,ehci_hcd
nls_base 4541 1 usbcore
thermal_sys 9378 3 video,processor,thermal

** PCI devices:
00:00.0 Host bridge [0600]: nVidia Corporation MCP79 Host Bridge
[10de:0a82] (rev b1)
Subsystem: Hewlett-Packard Company Device [103c:3651]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:00.1 RAM memory [0500]: nVidia Corporation MCP79 Memory Controller
[10de:0a88] (rev b1)
Subsystem: Hewlett-Packard Company Device [103c:3651]
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:03.0 ISA bridge [0601]: nVidia Corporation MCP79 LPC Bridge [10de:0aae]
(rev b3)
Subsystem: Hewlett-Packard Company Device [103c:3651]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:03.1 RAM memory [0500]: nVidia Corporation MCP79 Memory Controller
[10de:0aa4] (rev b1)
Subsystem: Hewlett-Packard Company Device [103c:3651]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

00:03.2 SMBus [0c05]: nVidia Corporation MCP79 SMBus [10de:0aa2] (rev
b1)
Subsystem: Hewlett-Packard Company Device [103c:3651]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 3080 [size=64]
Region 4: I/O ports at 3040 [size=64]
Region 5: I/O ports at 3000 [size=64]
Capabilities: <access denied>
Kernel driver in use: nForce2_smbus

00:03.3 RAM memory [0500]: nVidia Corporation MCP79 Memory Controller
[10de:0a89] (rev b1)
Subsystem: Hewlett-Packard Company Device [103c:3651]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

00:03.5 Co-processor [0b40]: nVidia Corporation MCP79 Co-processor
[10de:0aa3] (rev b1)
Subsystem: Hewlett-Packard Company Device [103c:3651]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 21
Region 0: Memory at feb80000 (32-bit, non-prefetchable) [size=512K]
Kernel driver in use: nvidia

00:04.0 USB Controller [0c03]: nVidia Corporation MCP79 OHCI USB 1.1
Controller [10de:0aa5] (rev b1) (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:3651]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 23
Region 0: Memory at 53108000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd

00:04.1 USB Controller [0c03]: nVidia Corporation MCP79 EHCI USB 2.0
Controller [10de:0aa6] (rev b1) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:3651]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 23
Region 0: Memory at 53109200 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:06.0 USB Controller [0c03]: nVidia Corporation MCP79 OHCI USB 1.1
Controller [10de:0aa7] (rev b1) (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:3651]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 22
Region 0: Memory at 53107000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd

00:06.1 USB Controller [0c03]: nVidia Corporation MCP79 EHCI USB 2.0
Controller [10de:0aa9] (rev b1) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:3651]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 22
Region 0: Memory at 53109100 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:08.0 Audio device [0403]: nVidia Corporation MCP79 High Definition Audio
[10de:0ac0] (rev b1)
Subsystem: Hewlett-Packard Company Device [103c:3651]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin A routed to IRQ 23
Region 0: Memory at 53100000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel

00:09.0 PCI bridge [0604]: nVidia Corporation MCP79 PCI Bridge [10de:0aab]
(rev b1) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>

00:0a.0 Ethernet controller [0200]: nVidia Corporation MCP79 Ethernet
[10de:0ab0] (rev b1)
Subsystem: Hewlett-Packard Company Device [103c:3651]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 21
Region 0: Memory at 53106000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 30e0 [size=8]
Region 2: Memory at 53109000 (32-bit, non-prefetchable) [size=256]
Region 3: Memory at 53109300 (32-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: forcedeth

00:0b.0 SATA controller [0106]: nVidia Corporation MCP79 AHCI Controller
[10de:0ab9] (rev b1) (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company Device [103c:3651]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 26
Region 0: I/O ports at 30d8 [size=8]
Region 1: I/O ports at 30ec [size=4]
Region 2: I/O ports at 30d0 [size=8]
Region 3: I/O ports at 30e8 [size=4]
Region 4: I/O ports at 30c0 [size=16]
Region 5: Memory at 53104000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: ahci

00:10.0 PCI bridge [0604]: nVidia Corporation MCP79 PCI Express Bridge
[10de:0aa0] (rev b1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: 52000000-52ffffff
Prefetchable memory behind bridge:
0000000040000000-0000000051ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>

00:15.0 PCI bridge [0604]: nVidia Corporation MCP79 PCI Express Bridge
[10de:0ac6] (rev b1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: 53000000-530fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:16.0 PCI bridge [0604]: nVidia Corporation MCP79 PCI Express Bridge
[10de:0ac7] (rev b1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

02:00.0 VGA compatible controller [0300]: nVidia Corporation ION LE VGA
[10de:087f] (rev b1) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device [103c:3651]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at 52000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at 40000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at 50000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at 2000 [size=128]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: nvidia

03:00.0 Network controller [0280]: Broadcom Corporation BCM4312
802.11b/g LP-PHY [14e4:4315] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:365e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at 53000000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: b43-pci-bridge


** USB devices:
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 009: ID 12d1:140c Huawei Technologies Co., Ltd.
Bus 002 Device 002: ID 090c:637b Feiya Technology Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)

Kernel: Linux 2.6.32-3-686 (SMP w/2 CPU cores)
Locale: LANG=pt_PT.UTF-8, LC_CTYPE=pt_PT.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-2.6.32-3-686 depends on:
ii debconf [debconf-2.0] 1.5.32 Debian configuration management
sy
ii initramfs-tools [linux-initr 0.94.4 tools for generating an initramfs
ii module-init-tools 3.12~pre2-3 tools for managing Linux kernel
mo

Versions of packages linux-image-2.6.32-3-686 recommends:
ii firmware-linux-free 2.6.32-9 Binary firmware for various driver
ii libc6-i686 2.10.2-9 GNU C Library: Shared libraries
[i

Versions of packages linux-image-2.6.32-3-686 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)

Versions of packages linux-image-2.6.32-3-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
ii firmware-linux 0.24 Binary firmware for various driver
ii firmware-linux-nonfree 0.24 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)

-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-3-686/postinst/bootloader-error-2.6.32-3-686:
linux-image-2.6.32-3-686/postinst/depmod-error-initrd-2.6.32-3-686: false
linux-image-2.6.32-3-686/postinst/bootloader-test-error-2.6.32-3-686:
linux-image-2.6.32-3-686/postinst/missing-firmware-2.6.32-3-686:
linux-image-2.6.32-3-686/prerm/removing-running-kernel-2.6.32-3-686: true
linux-image-2.6.32-3-686/prerm/would-invalidate-boot-loader-2.6.32-3-686:
true



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 201005270909.58836.reis@fc.ul.pt">http://lists.debian.org/201005270909.58836.reis@fc.ul.pt