FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 05-17-2010, 03:26 AM
Ben Hutchings
 
Default Bug#581830: linux-image-2.6.32-5-amd64: console and X display do not work unless nouveau is blacklisted

On Sun, 2010-05-16 at 14:28 +0200, Vincent Lefevre wrote:
> Package: linux-2.6
> Version: 2.6.32-12
> Severity: grave
> Justification: renders package unusable

For you, but not for most users.

> When I boot, the screen goes black after a few lines and the monitor
> goes to sleep. Some time after (once X has started, I assume) the
> monitor wakes up, but with a corrupt image.

Please report this upstream at <https://bugzilla.freedesktop.org> under
product 'xorg', component 'Driver/nouveau'. (I realise this isn't a bug
in the X driver, but for bug tracking purpose the kernel and X drivers
are grouped together.)

Let us know the upstream bug number/URL so we can track it.

Ben.

--
Ben Hutchings
Once a job is fouled up, anything done to improve it makes it worse.
 
Old 05-17-2010, 08:22 AM
Vincent Lefevre
 
Default Bug#581830: linux-image-2.6.32-5-amd64: console and X display do not work unless nouveau is blacklisted

On 2010-05-17 04:26:01 +0100, Ben Hutchings wrote:
> On Sun, 2010-05-16 at 14:28 +0200, Vincent Lefevre wrote:
> > Package: linux-2.6
> > Version: 2.6.32-12
> > Severity: grave
> > Justification: renders package unusable
>
> For you, but not for most users.

Well, I didn't know that (bug 580894 is also set as "grave").
But note that the package is quite new, and most end users
didn't try it.

> Please report this upstream at <https://bugzilla.freedesktop.org> under
> product 'xorg', component 'Driver/nouveau'. (I realise this isn't a bug
> in the X driver, but for bug tracking purpose the kernel and X drivers
> are grouped together.)
>
> Let us know the upstream bug number/URL so we can track it.

https://bugs.freedesktop.org/show_bug.cgi?id=28140

--
Vincent Lefèvre <vincent@vinc17.net> - Web: <http://www.vinc17.net/>
100% accessible validated (X)HTML - Blog: <http://www.vinc17.net/blog/>
Work: CR INRIA - computer arithmetic / Arénaire project (LIP, ENS-Lyon)



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20100517082215.GD24867@prunille.vinc17.org">http://lists.debian.org/20100517082215.GD24867@prunille.vinc17.org
 
Old 06-04-2010, 03:47 PM
Vincent Lefevre
 
Default Bug#581830: linux-image-2.6.32-5-amd64: console and X display do not work unless nouveau is blacklisted

severity 581830 grave
retitle 581830 nouveau doesn't work (black screen) and cannot be blacklisted
thanks

On 2010-05-16 14:28:02 +0200, Vincent Lefevre wrote:
> The problem disappears after blacklisting "nouveau".

It is no longer possible to blacklist it. It gets loaded.

--
Vincent Lefèvre <vincent@vinc17.net> - Web: <http://www.vinc17.net/>
100% accessible validated (X)HTML - Blog: <http://www.vinc17.net/blog/>
Work: CR INRIA - computer arithmetic / Arénaire project (LIP, ENS-Lyon)



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20100604154721.GA19974@prunille.vinc17.org">http://lists.debian.org/20100604154721.GA19974@prunille.vinc17.org
 
Old 06-04-2010, 03:56 PM
Sven Joachim
 
Default Bug#581830: linux-image-2.6.32-5-amd64: console and X display do not work unless nouveau is blacklisted

On 2010-06-04 17:47 +0200, Vincent Lefevre wrote:

> severity 581830 grave
> retitle 581830 nouveau doesn't work (black screen) and cannot be blacklisted
> thanks
>
> On 2010-05-16 14:28:02 +0200, Vincent Lefevre wrote:
>> The problem disappears after blacklisting "nouveau".
>
> It is no longer possible to blacklist it. It gets loaded.

You should specify the nv driver in xorg.conf.

Sven



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 87bpbqu6zq.fsf@turtle.gmx.de">http://lists.debian.org/87bpbqu6zq.fsf@turtle.gmx.de
 
Old 06-04-2010, 04:02 PM
Vincent Lefevre
 
Default Bug#581830: linux-image-2.6.32-5-amd64: console and X display do not work unless nouveau is blacklisted

On 2010-06-04 17:56:09 +0200, Sven Joachim wrote:
> You should specify the nv driver in xorg.conf.

Unfortunately this doesn't seem to be possible: X crashes when I try
to generate a xorg.conf with "Xorg -configure". See

http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=580043

--
Vincent Lefèvre <vincent@vinc17.net> - Web: <http://www.vinc17.net/>
100% accessible validated (X)HTML - Blog: <http://www.vinc17.net/blog/>
Work: CR INRIA - computer arithmetic / Arénaire project (LIP, ENS-Lyon)



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20100604160237.GE15270@prunille.vinc17.org">http://lists.debian.org/20100604160237.GE15270@prunille.vinc17.org
 
Old 06-04-2010, 04:09 PM
Sven Joachim
 
Default Bug#581830: linux-image-2.6.32-5-amd64: console and X display do not work unless nouveau is blacklisted

On 2010-06-04 18:02 +0200, Vincent Lefevre wrote:

> On 2010-06-04 17:56:09 +0200, Sven Joachim wrote:
>> You should specify the nv driver in xorg.conf.
>
> Unfortunately this doesn't seem to be possible: X crashes when I try
> to generate a xorg.conf with "Xorg -configure". See
>
> http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=580043

So write xorg.conf by hand, here is one for you:

--8<---------------cut here---------------start------------->8---
Section "Device"
Identifier "n"
Driver "nv"
EndSection
--8<---------------cut here---------------end--------------->8---

Sven



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 8739x2u6e6.fsf@turtle.gmx.de">http://lists.debian.org/8739x2u6e6.fsf@turtle.gmx.de
 
Old 06-04-2010, 04:37 PM
Vincent Lefevre
 
Default Bug#581830: linux-image-2.6.32-5-amd64: console and X display do not work unless nouveau is blacklisted

On 2010-06-04 18:09:05 +0200, Sven Joachim wrote:
> So write xorg.conf by hand, here is one for you:
>
> --8<---------------cut here---------------start------------->8---
> Section "Device"
> Identifier "n"
> Driver "nv"
> EndSection
> --8<---------------cut here---------------end--------------->8---

Thanks. I wonder why the wiki says to run "Xorg -configure" while
starting from an empty file can be sufficient.

--
Vincent Lefèvre <vincent@vinc17.net> - Web: <http://www.vinc17.net/>
100% accessible validated (X)HTML - Blog: <http://www.vinc17.net/blog/>
Work: CR INRIA - computer arithmetic / Arénaire project (LIP, ENS-Lyon)



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20100604163705.GF15270@prunille.vinc17.org">http://lists.debian.org/20100604163705.GF15270@prunille.vinc17.org
 
Old 07-21-2010, 08:03 AM
Vincent Lefevre
 
Default Bug#581830: linux-image-2.6.32-5-amd64: console and X display do not work unless nouveau is blacklisted

On 2010-05-16 14:28:02 +0200, Vincent Lefevre wrote:
> When I boot, the screen goes black after a few lines and the monitor
> goes to sleep. Some time after (once X has started, I assume) the
> monitor wakes up, but with a corrupt image.

More precisely, the screen goes black a bit after the message

waiting for /dev to be fully populated

appears on the screen.

I've attached dmesg and lsmod information.

--
Vincent Lefèvre <vincent@vinc17.net> - Web: <http://www.vinc17.net/>
100% accessible validated (X)HTML - Blog: <http://www.vinc17.net/blog/>
Work: CR INRIA - computer arithmetic / Arénaire project (LIP, ENS-Lyon)
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-17) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-1) ) #1 SMP Sun Jul 11 01:44:28 UTC 2010
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=e3631277-c4d0-460e-a2a3-6de16013e050 ro quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 0000000000095800 (usable)
[ 0.000000] BIOS-e820: 0000000000095800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cefa5800 (usable)
[ 0.000000] BIOS-e820: 00000000cefa5800 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f8000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed40000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed45000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000630000000 (usable)
[ 0.000000] DMI 2.6 present.
[ 0.000000] last_pfn = 0x630000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-back
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00D0000000 mask FFF0000000 uncachable
[ 0.000000] 1 base 00E0000000 mask FFE0000000 uncachable
[ 0.000000] 2 base 0630000000 mask FFF0000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xcefa5 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cefa5000
[ 0.000000] 0000000000 - 00cee00000 page 2M
[ 0.000000] 00cee00000 - 00cefa5000 page 4k
[ 0.000000] kernel direct mapping tables up to cefa5000 @ 8000-e000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000630000000
[ 0.000000] 0100000000 - 0630000000 page 2M
[ 0.000000] kernel direct mapping tables up to 630000000 @ c000-26000
[ 0.000000] RAMDISK: 3774a000 - 37fef1f6
[ 0.000000] ACPI: RSDP 00000000000e9010 00024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 00000000cefb88e8 0006C (v01 HPQOEM SLIC-WKS 20090819 00000000)
[ 0.000000] ACPI: FACP 00000000cefb8a88 000F4 (v03 HPQOEM TYLSBURG 00000001 00000000)
[ 0.000000] ACPI: DSDT 00000000cefb92d7 0A73D (v01 COMPAQ DSDT_PRJ 00000001 MSFT 0100000E)
[ 0.000000] ACPI: FACS 00000000cefb8800 00040
[ 0.000000] ACPI: APIC 00000000cefb8b7c 00114 (v01 HPQOEM TYLSBURG 00000001 00000000)
[ 0.000000] ACPI: ASF! 00000000cefb8c90 00063 (v32 HPQOEM TYLSBURG 00000001 00000000)
[ 0.000000] ACPI: MCFG 00000000cefb8cf3 0003C (v01 HPQOEM TYLSBURG 00000001 00000000)
[ 0.000000] ACPI: TCPA 00000000cefb8d2f 00032 (v01 HPQOEM TYLSBURG 00000001 00000000)
[ 0.000000] ACPI: HPET 00000000cefb8ed7 00038 (v01 HPQOEM TYLSBURG 00000001 00000000)
[ 0.000000] ACPI: DMAR 00000000cefb8f0f 001B8 (v01 HPQOEM TYLSBURG 00000001 00000000)
[ 0.000000] ACPI: SRAT 00000000cefb90df 001F8 (v02 HPQOEM TYLSBURG 00000001 00000000)
[ 0.000000] ACPI: SSDT 00000000cefc4ee6 023D4 (v01 INTEL PPM RCM 80000001 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 2 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 4 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 6 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 16 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 18 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 20 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 22 -> Node 1
[ 0.000000] SRAT: Node 0 PXM 0 0-a0000
[ 0.000000] SRAT: Node 0 PXM 0 e8000-d0000000
[ 0.000000] SRAT: Node 0 PXM 0 100000000-330000000
[ 0.000000] SRAT: Node 1 PXM 1 330000000-630000000
[ 0.000000] NUMA: Allocated memnodemap from 100000 - 28c040
[ 0.000000] NUMA: Using 15 for the hash shift.
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000330000000
[ 0.000000] NODE_DATA [0000000000021000 - 0000000000028fff]
[ 0.000000] bootmap [0000000000029000 - 000000000008efff] pages 66
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0330000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001684754] TEXT DATA BSS ==> [0001000000 - 0001684754]
[ 0.000000] #3 [003774a000 - 0037fef1f6] RAMDISK ==> [003774a000 - 0037fef1f6]
[ 0.000000] #4 [0000095800 - 0000100000] BIOS reserved ==> [0000095800 - 0000100000]
[ 0.000000] #5 [0001685000 - 0001685120] BRK ==> [0001685000 - 0001685120]
[ 0.000000] #6 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000]
[ 0.000000] #7 [000000c000 - 0000021000] PGTABLE ==> [000000c000 - 0000021000]
[ 0.000000] #8 [0000100000 - 000028c040] MEMNODEMAP ==> [0000100000 - 000028c040]
[ 0.000000] Bootmem setup node 1 0000000330000000-0000000630000000
[ 0.000000] NODE_DATA [0000000330000000 - 0000000330007fff]
[ 0.000000] bootmap [0000000330008000 - 0000000330067fff] pages 60
[ 0.000000] (9 early reservations) ==> bootmem [0330000000 - 0630000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE
[ 0.000000] #2 [0001000000 - 0001684754] TEXT DATA BSS
[ 0.000000] #3 [003774a000 - 0037fef1f6] RAMDISK
[ 0.000000] #4 [0000095800 - 0000100000] BIOS reserved
[ 0.000000] #5 [0001685000 - 0001685120] BRK
[ 0.000000] #6 [0000008000 - 000000c000] PGTABLE
[ 0.000000] #7 [000000c000 - 0000021000] PGTABLE
[ 0.000000] #8 [0000100000 - 000028c040] MEMNODEMAP
[ 0.000000] found SMP MP-table at [ffff8800000f9bf0] f9bf0
[ 0.000000] [ffffea000b280000-ffffea000b3fffff] potential offnode page_structs
[ 0.000000] [ffffea0000000000-ffffea000b3fffff] PMD -> [ffff880001800000-ffff88000c1fffff] on node 0
[ 0.000000] [ffffea000b400000-ffffea0015bfffff] PMD -> [ffff880330200000-ffff88033a9fffff] on node 1
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00630000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000095
[ 0.000000] 0: 0x00000100 -> 0x000cefa5
[ 0.000000] 0: 0x00100000 -> 0x00330000
[ 0.000000] 1: 0x00330000 -> 0x00630000
[ 0.000000] On node 0 totalpages: 3141434
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 530 pages reserved
[ 0.000000] DMA zone: 3403 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 829405 pages, LIFO batch:31
[ 0.000000] Normal zone: 31360 pages used for memmap
[ 0.000000] Normal zone: 2262400 pages, LIFO batch:31
[ 0.000000] On node 1 totalpages: 3145728
[ 0.000000] Normal zone: 43008 pages used for memmap
[ 0.000000] Normal zone: 3102720 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0xf808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x14] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x16] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec10000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 2, version 32, address 0xfec10000, GSI 24-47
[ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec20000] gsi_base[48])
[ 0.000000] IOAPIC[2]: apic_id 3, version 32, address 0xfec20000, GSI 48-71
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] SMP: Allowing 16 CPUs, 8 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 72
[ 0.000000] PM: Registered nosave memory: 0000000000095000 - 0000000000096000
[ 0.000000] PM: Registered nosave memory: 0000000000096000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
[ 0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cefa5000 - 00000000cefa6000
[ 0.000000] PM: Registered nosave memory: 00000000cefa6000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fed40000
[ 0.000000] PM: Registered nosave memory: 00000000fed40000 - 00000000fed45000
[ 0.000000] PM: Registered nosave memory: 00000000fed45000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:20000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:2
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff88000c400000 s90328 r8192 d24360 u262144
[ 0.000000] pcpu-alloc: s90328 r8192 d24360 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 08 10 12 14 [1] 04 05 06 07 09 11 13 15
[ 0.000000] Built 2 zonelists in Zone order, mobility grouping on. Total pages: 6197928
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=e3631277-c4d0-460e-a2a3-6de16013e050 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff88000c5de000 - ffff8800105de000
[ 0.000000] software IO TLB at phys 0xc5de000 - 0x105de000
[ 0.000000] Memory: 24716880k/25952256k available (3067k kernel code, 803608k absent, 431768k reserved, 1887k data, 588k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=2
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:1352
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 2266.678 MHz processor.
[ 0.000006] Calibrating delay loop (skipped), value calculated using timer frequency.. 4533.35 BogoMIPS (lpj=9066712)
[ 0.000021] Security Framework initialized
[ 0.000024] SELinux: Disabled at boot.
[ 0.001941] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[ 0.008917] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.011885] Mount-cache hash table entries: 256
[ 0.012032] Initializing cgroup subsys ns
[ 0.012034] Initializing cgroup subsys cpuacct
[ 0.012039] Initializing cgroup subsys devices
[ 0.012041] Initializing cgroup subsys freezer
[ 0.012042] Initializing cgroup subsys net_cls
[ 0.012059] CPU: Physical Processor ID: 0
[ 0.012060] CPU: Processor Core ID: 0
[ 0.012063] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.012064] CPU: L2 cache: 256K
[ 0.012065] CPU: L3 cache: 8192K
[ 0.012068] CPU 0/0x0 -> Node 0
[ 0.012070] mce: CPU supports 9 MCE banks
[ 0.012079] CPU0: Thermal monitoring enabled (TM1)
[ 0.012082] CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 SHD:8
[ 0.012089] using mwait in idle threads.
[ 0.012091] Performance Events: Nehalem/Corei7 events, Intel PMU driver.
[ 0.012095] ... version: 3
[ 0.012096] ... bit width: 48
[ 0.012097] ... generic registers: 4
[ 0.012098] ... value mask: 0000ffffffffffff
[ 0.012099] ... max period: 000000007fffffff
[ 0.012100] ... fixed-purpose events: 3
[ 0.012102] ... event mask: 000000070000000f
[ 0.012847] ACPI: Core revision 20090903
[ 0.027332] DMAR: Host address width 40
[ 0.027335] DMAR: DRHD base: 0x000000e4100000 flags: 0x0
[ 0.027342] IOMMU e4100000: ver 1:0 cap c90780106f0462 ecap f02076
[ 0.027344] DMAR: DRHD base: 0x000000fed90000 flags: 0x1
[ 0.027351] IOMMU fed90000: ver 1:0 cap c90780106f0462 ecap f02076
[ 0.027353] DMAR: RMRR base: 0x000000cefd0000 end: 0x000000cefd0fff
[ 0.027355] DMAR: RMRR base: 0x000000cefd1000 end: 0x000000cefd1fff
[ 0.027357] DMAR: RMRR base: 0x000000cefd2000 end: 0x000000cefd2fff
[ 0.027359] DMAR: RMRR base: 0x000000cefd3000 end: 0x000000cefd3fff
[ 0.027362] DMAR: RMRR base: 0x000000cefd4000 end: 0x000000cefd4fff
[ 0.027364] DMAR: RMRR base: 0x000000cefd5000 end: 0x000000cefd5fff
[ 0.027366] DMAR: RMRR base: 0x000000cefd6000 end: 0x000000cefd6fff
[ 0.027368] DMAR: RMRR base: 0x000000cefd7000 end: 0x000000cefd7fff
[ 0.027370] DMAR: ATSR flags: 0x0
[ 0.027378] Setting APIC routing to physical flat
[ 0.027967] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.067583] CPU0: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 0.172841] Booting processor 1 APIC 0x2 ip 0x6000
[ 0.183355] Initializing CPU#1
[ 0.260595] CPU: Physical Processor ID: 0
[ 0.260596] CPU: Processor Core ID: 1
[ 0.260598] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.260600] CPU: L2 cache: 256K
[ 0.260600] CPU: L3 cache: 8192K
[ 0.260602] CPU 1/0x2 -> Node 0
[ 0.260613] CPU1: Thermal monitoring enabled (TM1)
[ 0.260616] CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.260628] CPU1: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 0.260634] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.280679] Booting processor 2 APIC 0x4 ip 0x6000
[ 0.290943] Initializing CPU#2
[ 0.368411] CPU: Physical Processor ID: 0
[ 0.368412] CPU: Processor Core ID: 2
[ 0.368414] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.368416] CPU: L2 cache: 256K
[ 0.368417] CPU: L3 cache: 8192K
[ 0.368419] CPU 2/0x4 -> Node 0
[ 0.368429] CPU2: Thermal monitoring enabled (TM1)
[ 0.368432] CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.368463] CPU2: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 0.368470] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.388519] Booting processor 3 APIC 0x6 ip 0x6000
[ 0.398783] Initializing CPU#3
[ 0.476227] CPU: Physical Processor ID: 0
[ 0.476228] CPU: Processor Core ID: 3
[ 0.476231] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.476232] CPU: L2 cache: 256K
[ 0.476233] CPU: L3 cache: 8192K
[ 0.476235] CPU 3/0x6 -> Node 0
[ 0.476245] CPU3: Thermal monitoring enabled (TM1)
[ 0.476248] CPU 3 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.476304] CPU3: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 0.476310] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.496373] Booting processor 4 APIC 0x10 ip 0x6000
[ 0.506646] Initializing CPU#4
[ 0.584043] CPU: Physical Processor ID: 1
[ 0.584044] CPU: Processor Core ID: 0
[ 0.584047] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.584048] CPU: L2 cache: 256K
[ 0.584049] CPU: L3 cache: 8192K
[ 0.584051] CPU 4/0x10 -> Node 1
[ 0.584062] CPU4: Thermal monitoring enabled (TM1)
[ 0.584064] CPU 4 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 SHD:8
[ 0.584158] CPU4: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 0.584164] checking TSC synchronization [CPU#0 -> CPU#4]: passed.
[ 0.604190] Booting processor 5 APIC 0x12 ip 0x6000
[ 0.614465] Initializing CPU#5
[ 0.691861] CPU: Physical Processor ID: 1
[ 0.691862] CPU: Processor Core ID: 1
[ 0.691865] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.691866] CPU: L2 cache: 256K
[ 0.691867] CPU: L3 cache: 8192K
[ 0.691870] CPU 5/0x12 -> Node 1
[ 0.691882] CPU5: Thermal monitoring enabled (TM1)
[ 0.691885] CPU 5 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.691975] CPU5: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 0.691981] checking TSC synchronization [CPU#0 -> CPU#5]: passed.
[ 0.712008] Booting processor 6 APIC 0x14 ip 0x6000
[ 0.722284] Initializing CPU#6
[ 0.799677] CPU: Physical Processor ID: 1
[ 0.799678] CPU: Processor Core ID: 2
[ 0.799681] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.799682] CPU: L2 cache: 256K
[ 0.799683] CPU: L3 cache: 8192K
[ 0.799686] CPU 6/0x14 -> Node 1
[ 0.799698] CPU6: Thermal monitoring enabled (TM1)
[ 0.799701] CPU 6 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.799793] CPU6: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 0.799799] checking TSC synchronization [CPU#0 -> CPU#6]: passed.
[ 0.819828] Booting processor 7 APIC 0x16 ip 0x6000
[ 0.830103] Initializing CPU#7
[ 0.907493] CPU: Physical Processor ID: 1
[ 0.907494] CPU: Processor Core ID: 3
[ 0.907497] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.907498] CPU: L2 cache: 256K
[ 0.907499] CPU: L3 cache: 8192K
[ 0.907502] CPU 7/0x16 -> Node 1
[ 0.907514] CPU7: Thermal monitoring enabled (TM1)
[ 0.907517] CPU 7 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.907612] CPU7: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 0.907618] checking TSC synchronization [CPU#0 -> CPU#7]: passed.
[ 0.927603] Brought up 8 CPUs
[ 0.927605] Total of 8 processors activated (36266.80 BogoMIPS).
[ 0.930909] CPU0 attaching sched-domain:
[ 0.930912] domain 0: span 0-3 level MC
[ 0.930914] groups: 0 1 2 3
[ 0.930918] domain 1: span 0-7 level NODE
[ 0.930920] groups: 0-3 (cpu_power = 4096) 4-7 (cpu_power = 4096)
[ 0.930925] CPU1 attaching sched-domain:
[ 0.930927] domain 0: span 0-3 level MC
[ 0.930928] groups: 1 2 3 0
[ 0.930932] domain 1: span 0-7 level NODE
[ 0.930933] groups: 0-3 (cpu_power = 4096) 4-7 (cpu_power = 4096)
[ 0.930938] CPU2 attaching sched-domain:
[ 0.930939] domain 0: span 0-3 level MC
[ 0.930941] groups: 2 3 0 1
[ 0.930944] domain 1: span 0-7 level NODE
[ 0.930946] groups: 0-3 (cpu_power = 4096) 4-7 (cpu_power = 4096)
[ 0.930950] CPU3 attaching sched-domain:
[ 0.930952] domain 0: span 0-3 level MC
[ 0.930953] groups: 3 0 1 2
[ 0.930957] domain 1: span 0-7 level NODE
[ 0.930958] groups: 0-3 (cpu_power = 4096) 4-7 (cpu_power = 4096)
[ 0.930963] CPU4 attaching sched-domain:
[ 0.930964] domain 0: span 4-7 level MC
[ 0.930966] groups: 4 5 6 7
[ 0.930969] domain 1: span 0-7 level NODE
[ 0.930971] groups: 4-7 (cpu_power = 4096) 0-3 (cpu_power = 4096)
[ 0.930975] CPU5 attaching sched-domain:
[ 0.930977] domain 0: span 4-7 level MC
[ 0.930978] groups: 5 6 7 4
[ 0.930982] domain 1: span 0-7 level NODE
[ 0.930983] groups: 4-7 (cpu_power = 4096) 0-3 (cpu_power = 4096)
[ 0.930988] CPU6 attaching sched-domain:
[ 0.930989] domain 0: span 4-7 level MC
[ 0.930991] groups: 6 7 4 5
[ 0.930994] domain 1: span 0-7 level NODE
[ 0.930996] groups: 4-7 (cpu_power = 4096) 0-3 (cpu_power = 4096)
[ 0.931001] CPU7 attaching sched-domain:
[ 0.931002] domain 0: span 4-7 level MC
[ 0.931004] groups: 7 4 5 6
[ 0.931007] domain 1: span 0-7 level NODE
[ 0.931009] groups: 4-7 (cpu_power = 4096) 0-3 (cpu_power = 4096)
[ 0.931479] devtmpfs: initialized
[ 0.935874] regulator: core version 0.5
[ 0.935926] NET: Registered protocol family 16
[ 0.936005] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.936008] ACPI: bus type pci registered
[ 0.936070] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 127
[ 0.936072] PCI: MCFG area at f0000000 reserved in E820
[ 0.938706] PCI: Using MMCONFIG at f0000000 - f7ffffff
[ 0.938707] PCI: Using configuration type 1 for base access
[ 0.939869] bio: create slab <bio-0> at 0
[ 0.940669] ACPI: EC: Look up EC in DSDT
[ 0.948152] ACPI: Interpreter enabled
[ 0.948156] ACPI: (supports S0 S3 S4 S5)
[ 0.948174] ACPI: Using IOAPIC for interrupt routing
[ 0.953218] ACPI: Power Resource [X1PR] (on)
[ 0.953251] ACPI: Power Resource [X0PR] (on)
[ 0.953647] ACPI: No dock devices found.
[ 0.953698] ACPI: PCI Root Bridge [NHL1] (0000:7f)
[ 0.954669] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS
[ 0.954674] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88062e4264a0), AE_ALREADY_EXISTS
[ 0.954680] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
[ 0.954704] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.954776] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.954779] pci 0000:00:00.0: PME# disabled
[ 0.954835] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.954837] pci 0000:00:01.0: PME# disabled
[ 0.954896] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.954899] pci 0000:00:03.0: PME# disabled
[ 0.954956] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.954959] pci 0000:00:07.0: PME# disabled
[ 0.955318] pci 0000:00:1a.0: reg 20 io port: [0xc000-0xc01f]
[ 0.955379] pci 0000:00:1a.1: reg 20 io port: [0xc020-0xc03f]
[ 0.955444] pci 0000:00:1a.2: reg 20 io port: [0xc040-0xc05f]
[ 0.955509] pci 0000:00:1a.7: reg 10 32bit mmio: [0xe3304800-0xe3304bff]
[ 0.955558] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.955562] pci 0000:00:1a.7: PME# disabled
[ 0.955598] pci 0000:00:1b.0: reg 10 64bit mmio: [0xe3300000-0xe3303fff]
[ 0.955634] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.955637] pci 0000:00:1b.0: PME# disabled
[ 0.955691] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.955695] pci 0000:00:1c.0: PME# disabled
[ 0.955753] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.955757] pci 0000:00:1c.4: PME# disabled
[ 0.955813] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.955816] pci 0000:00:1c.5: PME# disabled
[ 0.955866] pci 0000:00:1d.0: reg 20 io port: [0xc060-0xc07f]
[ 0.955927] pci 0000:00:1d.1: reg 20 io port: [0xc080-0xc09f]
[ 0.955988] pci 0000:00:1d.2: reg 20 io port: [0xc0a0-0xc0bf]
[ 0.956053] pci 0000:00:1d.7: reg 10 32bit mmio: [0xe3304c00-0xe3304fff]
[ 0.956102] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.956106] pci 0000:00:1d.7: PME# disabled
[ 0.956216] pci 0000:00:1f.0: quirk: region f800-f87f claimed by ICH6 ACPI/GPIO/TCO
[ 0.956219] pci 0000:00:1f.0: quirk: region fa00-fa3f claimed by ICH6 GPIO
[ 0.956222] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0400 (mask 007f)
[ 0.956225] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0480 (mask 000f)
[ 0.956228] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0cb0 (mask 000f)
[ 0.956284] pci 0000:00:1f.2: reg 10 io port: [0xc100-0xc107]
[ 0.956289] pci 0000:00:1f.2: reg 14 io port: [0xc110-0xc113]
[ 0.956294] pci 0000:00:1f.2: reg 18 io port: [0xc108-0xc10f]
[ 0.956299] pci 0000:00:1f.2: reg 1c io port: [0xc114-0xc117]
[ 0.956304] pci 0000:00:1f.2: reg 20 io port: [0xc0c0-0xc0df]
[ 0.956309] pci 0000:00:1f.2: reg 24 32bit mmio: [0xe3304000-0xe33047ff]
[ 0.956336] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.956339] pci 0000:00:1f.2: PME# disabled
[ 0.956410] pci 0000:0f:00.0: reg 10 32bit mmio: [0xe2000000-0xe2ffffff]
[ 0.956421] pci 0000:0f:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.956432] pci 0000:0f:00.0: reg 1c 64bit mmio: [0xe0000000-0xe1ffffff]
[ 0.956438] pci 0000:0f:00.0: reg 24 io port: [0xd000-0xd07f]
[ 0.956444] pci 0000:0f:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.956510] pci 0000:00:03.0: bridge io port: [0xd000-0xdfff]
[ 0.956513] pci 0000:00:03.0: bridge 32bit mmio: [0xe0000000-0xe2ffffff]
[ 0.956517] pci 0000:00:03.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.956639] pci 0000:02:00.0: reg 10 64bit mmio: [0xe3100000-0xe310ffff]
[ 0.956712] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.956716] pci 0000:02:00.0: PME# disabled
[ 0.956780] pci 0000:00:1c.4: bridge 32bit mmio: [0xe3100000-0xe31fffff]
[ 0.956845] pci 0000:01:00.0: reg 10 64bit mmio: [0xe3200000-0xe320ffff]
[ 0.956918] pci 0000:01:00.0: PME# supported from D3hot D3cold
[ 0.956923] pci 0000:01:00.0: PME# disabled
[ 0.956987] pci 0000:00:1c.5: bridge 32bit mmio: [0xe3200000-0xe32fffff]
[ 0.957033] pci 0000:37:09.0: reg 10 32bit mmio: [0xe3000000-0xe3000fff]
[ 0.957075] pci 0000:37:09.0: supports D1 D2
[ 0.957076] pci 0000:37:09.0: PME# supported from D0 D1 D2 D3hot
[ 0.957080] pci 0000:37:09.0: PME# disabled
[ 0.957114] pci 0000:00:1e.0: transparent bridge
[ 0.957119] pci 0000:00:1e.0: bridge 32bit mmio: [0xe3000000-0xe30fffff]
[ 0.957148] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.957330] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IOH1._PRT]
[ 0.957402] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IOH3._PRT]
[ 0.957472] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IOH7._PRT]
[ 0.957545] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX1._PRT]
[ 0.957616] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX5._PRT]
[ 0.957686] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX6._PRT]
[ 0.957756] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
[ 0.957925] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS
[ 0.957930] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88062e4264a0), AE_ALREADY_EXISTS
[ 0.995321] ACPI: PCI Root Bridge [PCI1] (0000:40)
[ 0.995483] pci 0000:40:03.0: PME# supported from D0 D3hot D3cold
[ 0.995486] pci 0000:40:03.0: PME# disabled
[ 0.995564] pci 0000:40:07.0: PME# supported from D0 D3hot D3cold
[ 0.995567] pci 0000:40:07.0: PME# disabled
[ 0.995632] pci 0000:40:09.0: PME# supported from D0 D3hot D3cold
[ 0.995635] pci 0000:40:09.0: PME# disabled
[ 0.996091] pci 0000:41:00.0: reg 10 io port: [0xe000-0xe0ff]
[ 0.996101] pci 0000:41:00.0: reg 14 64bit mmio: [0xe4010000-0xe4013fff]
[ 0.996110] pci 0000:41:00.0: reg 1c 64bit mmio: [0xe4000000-0xe400ffff]
[ 0.996119] pci 0000:41:00.0: reg 30 32bit mmio pref: [0x000000-0x1fffff]
[ 0.996141] pci 0000:41:00.0: supports D1 D2
[ 0.996160] pci 0000:41:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.996181] pci 0000:40:09.0: bridge io port: [0xe000-0xefff]
[ 0.996184] pci 0000:40:09.0: bridge 32bit mmio: [0xe4000000-0xe40fffff]
[ 0.996201] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
[ 0.996267] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IOH3._PRT]
[ 0.996337] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IOH7._PRT]
[ 0.996406] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IOH9._PRT]
[ 0.997694] ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 10 11 14 15)
[ 0.997789] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 14 15)
[ 0.997882] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 0.997975] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[ 0.998072] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 0.998164] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 0.998257] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 14 15)
[ 0.998350] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 0.998452] vgaarb: device added: PCI:0000:0f:00.0,decodes=io+mem,owns=io+mem,locks= none
[ 0.998459] vgaarb: loaded
[ 0.998507] PCI: Using ACPI for IRQ routing
[ 0.998736] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.998739] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 1.015573] Switching to clocksource tsc
[ 1.016840] pnp: PnP ACPI init
[ 1.016859] ACPI: bus type pnp registered
[ 1.019009] pnp 00:0d: io resource (0xf800-0xf81f) overlaps 0000:00:1f.0 BAR 13 (0xf800-0xf87f), disabling
[ 1.019012] pnp 00:0d: io resource (0xf820-0xf83f) overlaps 0000:00:1f.0 BAR 13 (0xf800-0xf87f), disabling
[ 1.019015] pnp 00:0d: io resource (0xf840-0xf85f) overlaps 0000:00:1f.0 BAR 13 (0xf800-0xf87f), disabling
[ 1.019018] pnp 00:0d: io resource (0xf860-0xf87f) overlaps 0000:00:1f.0 BAR 13 (0xf800-0xf87f), disabling
[ 1.020127] pnp 00:11: mem resource (0x0-0x9ffff) overlaps 0000:41:00.0 BAR 6 (0x0-0x1fffff), disabling
[ 1.020130] pnp 00:11: mem resource (0x100000-0xcfffffff) overlaps 0000:41:00.0 BAR 6 (0x0-0x1fffff), disabling
[ 1.020133] pnp 00:11: mem resource (0xe8000-0xfffff) overlaps 0000:41:00.0 BAR 6 (0x0-0x1fffff), disabling
[ 1.020135] pnp 00:11: mem resource (0xdd400-0xe7fff) overlaps 0000:41:00.0 BAR 6 (0x0-0x1fffff), disabling
[ 1.020171] pnp: PnP ACPI: found 18 devices
[ 1.020172] ACPI: ACPI bus type pnp unregistered
[ 1.020184] system 00:0d: ioport range 0x400-0x41f has been reserved
[ 1.020186] system 00:0d: ioport range 0x420-0x43f has been reserved
[ 1.020188] system 00:0d: ioport range 0x440-0x45f has been reserved
[ 1.020190] system 00:0d: ioport range 0x460-0x47f has been reserved
[ 1.020192] system 00:0d: ioport range 0x480-0x48f has been reserved
[ 1.020195] system 00:0d: ioport range 0xfa00-0xfa3f has been reserved
[ 1.020197] system 00:0d: ioport range 0xfc00-0xfc7f has been reserved
[ 1.020199] system 00:0d: ioport range 0xfc80-0xfcff has been reserved
[ 1.020201] system 00:0d: ioport range 0xfe00-0xfe7f has been reserved
[ 1.020203] system 00:0d: ioport range 0xfe80-0xfeff has been reserved
[ 1.020207] system 00:0e: ioport range 0x4d0-0x4d1 has been reserved
[ 1.020209] system 00:0e: ioport range 0x4700-0x470b has been reserved
[ 1.020217] system 00:10: iomem range 0xe4100000-0xe4101fff has been reserved
[ 1.020221] system 00:11: iomem range 0xfec01000-0xfecfffff could not be reserved
[ 1.020223] system 00:11: iomem range 0xfed00000-0xfed3ffff has been reserved
[ 1.020225] system 00:11: iomem range 0xfed40000-0xffffffff could not be reserved
[ 1.020228] system 00:11: iomem range 0xf0000000-0xf7ffffff has been reserved
[ 1.025248] pci 0000:00:01.0: PCI bridge, secondary bus 0000:03
[ 1.025249] pci 0000:00:01.0: IO window: disabled
[ 1.025253] pci 0000:00:01.0: MEM window: disabled
[ 1.025256] pci 0000:00:01.0: PREFETCH window: disabled
[ 1.025262] pci 0000:0f:00.0: BAR 6: can't allocate mem resource [0xe0000000-0xdfffffff]
[ 1.025264] pci 0000:00:03.0: PCI bridge, secondary bus 0000:0f
[ 1.025267] pci 0000:00:03.0: IO window: 0xd000-0xdfff
[ 1.025271] pci 0000:00:03.0: MEM window: 0xe0000000-0xe2ffffff
[ 1.025274] pci 0000:00:03.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 1.025279] pci 0000:00:07.0: PCI bridge, secondary bus 0000:28
[ 1.025280] pci 0000:00:07.0: IO window: disabled
[ 1.025284] pci 0000:00:07.0: MEM window: disabled
[ 1.025286] pci 0000:00:07.0: PREFETCH window: disabled
[ 1.025291] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:1c
[ 1.025294] pci 0000:00:1c.0: IO window: 0x1000-0x1fff
[ 1.025298] pci 0000:00:1c.0: MEM window: 0xe3400000-0xe35fffff
[ 1.025302] pci 0000:00:1c.0: PREFETCH window: 0x000000e3600000-0x000000e37fffff
[ 1.025307] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:02
[ 1.025310] pci 0000:00:1c.4: IO window: 0x2000-0x2fff
[ 1.025314] pci 0000:00:1c.4: MEM window: 0xe3100000-0xe31fffff
[ 1.025318] pci 0000:00:1c.4: PREFETCH window: 0x000000e3800000-0x000000e39fffff
[ 1.025323] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:01
[ 1.025325] pci 0000:00:1c.5: IO window: 0x3000-0x3fff
[ 1.025330] pci 0000:00:1c.5: MEM window: 0xe3200000-0xe32fffff
[ 1.025333] pci 0000:00:1c.5: PREFETCH window: 0x000000e3a00000-0x000000e3bfffff
[ 1.025339] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:37
[ 1.025340] pci 0000:00:1e.0: IO window: disabled
[ 1.025344] pci 0000:00:1e.0: MEM window: 0xe3000000-0xe30fffff
[ 1.025347] pci 0000:00:1e.0: PREFETCH window: disabled
[ 1.025360] pci 0000:00:01.0: setting latency timer to 64
[ 1.025368] pci 0000:00:03.0: setting latency timer to 64
[ 1.025375] pci 0000:00:07.0: setting latency timer to 64
[ 1.025383] pci 0000:00:1c.0: setting latency timer to 64
[ 1.025391] alloc irq_desc for 20 on node -1
[ 1.025393] alloc kstat_irqs on node -1
[ 1.025398] pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.025402] pci 0000:00:1c.4: setting latency timer to 64
[ 1.025409] alloc irq_desc for 21 on node -1
[ 1.025410] alloc kstat_irqs on node -1
[ 1.025413] pci 0000:00:1c.5: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.025417] pci 0000:00:1c.5: setting latency timer to 64
[ 1.025454] pci 0000:00:1e.0: power state changed by ACPI to D0
[ 1.025482] pci 0000:00:1e.0: power state changed by ACPI to D0
[ 1.025487] pci 0000:00:1e.0: setting latency timer to 64
[ 1.025497] pci 0000:40:03.0: PCI bridge, secondary bus 0000:42
[ 1.025498] pci 0000:40:03.0: IO window: disabled
[ 1.025504] pci 0000:40:03.0: MEM window: disabled
[ 1.025506] pci 0000:40:03.0: PREFETCH window: disabled
[ 1.025510] pci 0000:40:07.0: PCI bridge, secondary bus 0000:60
[ 1.025512] pci 0000:40:07.0: IO window: disabled
[ 1.025515] pci 0000:40:07.0: MEM window: disabled
[ 1.025517] pci 0000:40:07.0: PREFETCH window: disabled
[ 1.025522] pci 0000:40:09.0: PCI bridge, secondary bus 0000:41
[ 1.025524] pci 0000:40:09.0: IO window: 0xe000-0xefff
[ 1.025528] pci 0000:40:09.0: MEM window: 0xe4000000-0xe40fffff
[ 1.025531] pci 0000:40:09.0: PREFETCH window: 0xe3c00000-0xe3dfffff
[ 1.025539] pci 0000:40:03.0: setting latency timer to 64
[ 1.025550] pci 0000:40:07.0: setting latency timer to 64
[ 1.025556] pci 0000:40:09.0: setting latency timer to 64
[ 1.025559] pci_bus 0000:7f: resource 0 io: [0x00-0xffff]
[ 1.025561] pci_bus 0000:7f: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 1.025564] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 1.025565] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 1.025567] pci_bus 0000:0f: resource 0 io: [0xd000-0xdfff]
[ 1.025569] pci_bus 0000:0f: resource 1 mem: [0xe0000000-0xe2ffffff]
[ 1.025571] pci_bus 0000:0f: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 1.025573] pci_bus 0000:1c: resource 0 io: [0x1000-0x1fff]
[ 1.025575] pci_bus 0000:1c: resource 1 mem: [0xe3400000-0xe35fffff]
[ 1.025577] pci_bus 0000:1c: resource 2 pref mem [0xe3600000-0xe37fffff]
[ 1.025578] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
[ 1.025580] pci_bus 0000:02: resource 1 mem: [0xe3100000-0xe31fffff]
[ 1.025582] pci_bus 0000:02: resource 2 pref mem [0xe3800000-0xe39fffff]
[ 1.025584] pci_bus 0000:01: resource 0 io: [0x3000-0x3fff]
[ 1.025585] pci_bus 0000:01: resource 1 mem: [0xe3200000-0xe32fffff]
[ 1.025587] pci_bus 0000:01: resource 2 pref mem [0xe3a00000-0xe3bfffff]
[ 1.025589] pci_bus 0000:37: resource 1 mem: [0xe3000000-0xe30fffff]
[ 1.025591] pci_bus 0000:37: resource 3 io: [0x00-0xffff]
[ 1.025593] pci_bus 0000:37: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 1.025595] pci_bus 0000:40: resource 0 io: [0x00-0xffff]
[ 1.025596] pci_bus 0000:40: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 1.025598] pci_bus 0000:41: resource 0 io: [0xe000-0xefff]
[ 1.025600] pci_bus 0000:41: resource 1 mem: [0xe4000000-0xe40fffff]
[ 1.025602] pci_bus 0000:41: resource 2 pref mem [0xe3c00000-0xe3dfffff]
[ 1.025632] NET: Registered protocol family 2
[ 1.025965] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 1.027144] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.028733] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.028919] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.028921] TCP reno registered
[ 1.029074] NET: Registered protocol family 1
[ 1.029294] pci 0000:0f:00.0: Boot video device
[ 1.029355] Unpacking initramfs...
[ 1.201070] Freeing initrd memory: 8852k freed
[ 1.203009] DMAR: Unsupported device scope
[ 1.203659] audit: initializing netlink socket (disabled)
[ 1.203671] type=2000 audit(1279698034.991:1): initialized
[ 1.209110] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.210284] VFS: Disk quotas dquot_6.5.2
[ 1.210342] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.210415] msgmni has been set to 32768
[ 1.210722] alg: No test for stdrng (krng)
[ 1.210782] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.210785] io scheduler noop registered
[ 1.210786] io scheduler anticipatory registered
[ 1.210788] io scheduler deadline registered
[ 1.210811] io scheduler cfq registered (default)
[ 1.211012] alloc irq_desc for 72 on node -1
[ 1.211014] alloc kstat_irqs on node -1
[ 1.211024] pcieport 0000:00:01.0: irq 72 for MSI/MSI-X
[ 1.211032] pcieport 0000:00:01.0: setting latency timer to 64
[ 1.211133] alloc irq_desc for 73 on node -1
[ 1.211135] alloc kstat_irqs on node -1
[ 1.211140] pcieport 0000:00:03.0: irq 73 for MSI/MSI-X
[ 1.211146] pcieport 0000:00:03.0: setting latency timer to 64
[ 1.211244] alloc irq_desc for 74 on node -1
[ 1.211246] alloc kstat_irqs on node -1
[ 1.211255] pcieport 0000:00:07.0: irq 74 for MSI/MSI-X
[ 1.211261] pcieport 0000:00:07.0: setting latency timer to 64
[ 1.211358] alloc irq_desc for 75 on node -1
[ 1.211359] alloc kstat_irqs on node -1
[ 1.211365] pcieport 0000:00:1c.0: irq 75 for MSI/MSI-X
[ 1.211372] pcieport 0000:00:1c.0: setting latency timer to 64
[ 1.211482] alloc irq_desc for 76 on node -1
[ 1.211483] alloc kstat_irqs on node -1
[ 1.211489] pcieport 0000:00:1c.4: irq 76 for MSI/MSI-X
[ 1.211496] pcieport 0000:00:1c.4: setting latency timer to 64
[ 1.211600] alloc irq_desc for 77 on node -1
[ 1.211601] alloc kstat_irqs on node -1
[ 1.211607] pcieport 0000:00:1c.5: irq 77 for MSI/MSI-X
[ 1.211614] pcieport 0000:00:1c.5: setting latency timer to 64
[ 1.211718] alloc irq_desc for 78 on node -1
[ 1.211719] alloc kstat_irqs on node -1
[ 1.211724] pcieport 0000:40:03.0: irq 78 for MSI/MSI-X
[ 1.211729] pcieport 0000:40:03.0: setting latency timer to 64
[ 1.211814] alloc irq_desc for 79 on node -1
[ 1.211816] alloc kstat_irqs on node -1
[ 1.211821] pcieport 0000:40:07.0: irq 79 for MSI/MSI-X
[ 1.211826] pcieport 0000:40:07.0: setting latency timer to 64
[ 1.211916] alloc irq_desc for 80 on node -1
[ 1.211917] alloc kstat_irqs on node -1
[ 1.211922] pcieport 0000:40:09.0: irq 80 for MSI/MSI-X
[ 1.211927] pcieport 0000:40:09.0: setting latency timer to 64
[ 1.212102] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS
[ 1.212108] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88062e4264a0), AE_ALREADY_EXISTS
[ 1.212144] aer 0000:00:01.0cie02: AER service couldn't init device: _OSC failed
[ 1.212226] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS
[ 1.212231] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88062e4264a0), AE_ALREADY_EXISTS
[ 1.212257] aer 0000:00:03.0cie02: AER service couldn't init device: _OSC failed
[ 1.212336] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS
[ 1.212341] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88062e4264a0), AE_ALREADY_EXISTS
[ 1.212366] aer 0000:00:07.0cie02: AER service couldn't init device: _OSC failed
[ 1.212372] aer 0000:40:03.0cie02: AER service couldn't init device: no _OSC support
[ 1.212376] aer 0000:40:07.0cie02: AER service couldn't init device: no _OSC support
[ 1.212380] aer 0000:40:09.0cie02: AER service couldn't init device: no _OSC support
[ 1.213452] Linux agpgart interface v0.103
[ 1.213494] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.213617] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.213875] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.214047] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 1.214094] PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
[ 1.216693] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.216699] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.216806] mice: PS/2 mouse device common for all mice
[ 1.216839] rtc_cmos 00:04: RTC can wake from S4
[ 1.216865] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.216887] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.216898] cpuidle: using governor ladder
[ 1.216899] cpuidle: using governor menu
[ 1.216903] No iBFT detected.
[ 1.217172] TCP cubic registered
[ 1.217263] NET: Registered protocol family 10
[ 1.217694] lo: Disabled Privacy Extensions
[ 1.217906] Mobile IPv6
[ 1.217908] NET: Registered protocol family 17
[ 1.217967] PM: Resume from disk failed.
[ 1.217976] registered taskstats version 1
[ 1.218634] rtc_cmos 00:04: setting system clock to 2010-07-21 07:40:35 UTC (1279698035)
[ 1.218656] Initalizing network drop monitor service
[ 1.218689] Freeing unused kernel memory: 588k freed
[ 1.218794] Write protecting the kernel read-only data: 4220k
[ 1.230848] udev: starting version 160
[ 1.258541] usbcore: registered new interface driver usbfs
[ 1.258565] usbcore: registered new interface driver hub
[ 1.260533] usbcore: registered new device driver usb
[ 1.261303] tg3.c:v3.102 (September 1, 2009)
[ 1.261320] alloc irq_desc for 16 on node -1
[ 1.261322] alloc kstat_irqs on node -1
[ 1.261338] tg3 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.261344] tg3 0000:02:00.0: setting latency timer to 64
[ 1.262812] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.262861] alloc irq_desc for 22 on node -1
[ 1.262863] alloc kstat_irqs on node -1
[ 1.262870] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 1.262897] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.262900] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.262919] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.262948] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.266840] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 1.266853] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xe3304800
[ 1.269751] FDC 0 is a post-1991 82077
[ 1.271978] SCSI subsystem initialized
[ 1.280200] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.280224] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.280227] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.280230] usb usb1: Product: EHCI Host Controller
[ 1.280232] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 1.280234] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.280300] usb usb1: configuration #1 chosen from 1 choice
[ 1.280322] hub 1-0:1.0: USB hub found
[ 1.280329] hub 1-0:1.0: 6 ports detected
[ 1.280383] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.280408] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.280410] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.280417] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.280440] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.282212] libata version 3.00 loaded.
[ 1.284329] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.284341] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe3304c00
[ 1.285174] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.285999] alloc irq_desc for 23 on node -1
[ 1.286001] alloc kstat_irqs on node -1
[ 1.286006] firewire_ohci 0000:37:09.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.288755] eth0: Tigon3 [partno(BCM95754) rev 5784100] (PCI Express) MAC address 00:1f:29:04:3e:fb
[ 1.288757] eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[ 1.288759] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 1.288761] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 1.288778] alloc irq_desc for 17 on node -1
[ 1.288779] alloc kstat_irqs on node -1
[ 1.288794] tg3 0000:01:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.288799] tg3 0000:01:00.0: setting latency timer to 64
[ 1.292928] Fusion MPT base driver 3.04.12
[ 1.292930] Copyright (c) 1999-2008 LSI Corporation
[ 1.298468] Fusion MPT SAS Host driver 3.04.12
[ 1.298513] alloc irq_desc for 56 on node -1
[ 1.298515] alloc kstat_irqs on node -1
[ 1.298521] mptsas 0000:41:00.0: PCI INT A -> GSI 56 (level, low) -> IRQ 56
[ 1.298623] mptbase: ioc0: Initiating bringup
[ 1.299778] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.299798] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.299801] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.299803] usb usb2: Product: EHCI Host Controller
[ 1.299805] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 1.299808] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.299874] usb usb2: configuration #1 chosen from 1 choice
[ 1.299894] hub 2-0:1.0: USB hub found
[ 1.299899] hub 2-0:1.0: 6 ports detected
[ 1.299951] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.299958] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.299962] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.299977] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.300001] uhci_hcd 0000:00:1a.0: irq 20, io base 0x0000c000
[ 1.300036] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.300038] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.300040] usb usb3: Product: UHCI Host Controller
[ 1.300041] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 1.300043] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.300100] usb usb3: configuration #1 chosen from 1 choice
[ 1.300123] hub 3-0:1.0: USB hub found
[ 1.300128] hub 3-0:1.0: 2 ports detected
[ 1.300165] ahci 0000:00:1f.2: version 3.0
[ 1.300173] alloc irq_desc for 18 on node -1
[ 1.300175] alloc kstat_irqs on node -1
[ 1.300179] ahci 0000:00:1f.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 1.300213] alloc irq_desc for 81 on node -1
[ 1.300215] alloc kstat_irqs on node -1
[ 1.300222] ahci 0000:00:1f.2: irq 81 for MSI/MSI-X
[ 1.300229] ahci 0000:00:1f.2: controller can't do SNTF, turning off CAP_SNTF
[ 1.300285] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
[ 1.300288] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pmp pio slum part ccc sxs
[ 1.300292] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.300524] scsi0 : ahci
[ 1.300604] scsi1 : ahci
[ 1.300672] scsi2 : ahci
[ 1.300721] scsi3 : ahci
[ 1.300785] scsi4 : ahci
[ 1.300851] scsi5 : ahci
[ 1.300899] ata1: SATA max UDMA/133 abar m2048@0xe3304000 port 0xe3304100 irq 81
[ 1.300902] ata2: SATA max UDMA/133 abar m2048@0xe3304000 port 0xe3304180 irq 81
[ 1.300904] ata3: SATA max UDMA/133 abar m2048@0xe3304000 port 0xe3304200 irq 81
[ 1.300906] ata4: SATA max UDMA/133 abar m2048@0xe3304000 port 0xe3304280 irq 81
[ 1.300909] ata5: SATA max UDMA/133 abar m2048@0xe3304000 port 0xe3304300 irq 81
[ 1.300911] ata6: SATA max UDMA/133 abar m2048@0xe3304000 port 0xe3304380 irq 81
[ 1.300930] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.300936] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.300938] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.300944] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.300972] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c020
[ 1.300997] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.300999] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.301001] usb usb4: Product: UHCI Host Controller
[ 1.301002] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 1.301003] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.301045] usb usb4: configuration #1 chosen from 1 choice
[ 1.301066] hub 4-0:1.0: USB hub found
[ 1.301071] hub 4-0:1.0: 2 ports detected
[ 1.301105] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 1.301110] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.301112] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.301117] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.301138] uhci_hcd 0000:00:1a.2: irq 22, io base 0x0000c040
[ 1.301162] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.301164] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.301165] usb usb5: Product: UHCI Host Controller
[ 1.301167] usb usb5: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 1.301168] usb usb5: SerialNumber: 0000:00:1a.2
[ 1.301208] usb usb5: configuration #1 chosen from 1 choice
[ 1.301227] hub 5-0:1.0: USB hub found
[ 1.301231] hub 5-0:1.0: 2 ports detected
[ 1.301267] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.301272] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.301274] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.301279] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.301300] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000c060
[ 1.301323] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.301325] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.301327] usb usb6: Product: UHCI Host Controller
[ 1.301328] usb usb6: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 1.301330] usb usb6: SerialNumber: 0000:00:1d.0
[ 1.301368] usb usb6: configuration #1 chosen from 1 choice
[ 1.301390] hub 6-0:1.0: USB hub found
[ 1.301394] hub 6-0:1.0: 2 ports detected
[ 1.301427] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.301432] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.301435] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.301439] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.301460] uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000c080
[ 1.301484] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.301486] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.301488] usb usb7: Product: UHCI Host Controller
[ 1.301489] usb usb7: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 1.301491] usb usb7: SerialNumber: 0000:00:1d.1
[ 1.301531] usb usb7: configuration #1 chosen from 1 choice
[ 1.301550] hub 7-0:1.0: USB hub found
[ 1.301555] hub 7-0:1.0: 2 ports detected
[ 1.301590] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 1.301595] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.301597] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.301602] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.301623] uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000c0a0
[ 1.301647] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.301649] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.301651] usb usb8: Product: UHCI Host Controller
[ 1.301652] usb usb8: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 1.301654] usb usb8: SerialNumber: 0000:00:1d.2
[ 1.301694] usb usb8: configuration #1 chosen from 1 choice
[ 1.301714] hub 8-0:1.0: USB hub found
[ 1.301718] hub 8-0:1.0: 2 ports detected
[ 1.322612] eth1: Tigon3 [partno(BCM95754) rev 5784100] (PCI Express) MAC address 00:1f:29:04:3e:fa
[ 1.322615] eth1: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[ 1.322617] eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 1.322619] eth1: dma_rwctrl[76180000] dma_mask[64-bit]
[ 1.355177] firewire_ohci: Added fw-ohci device 0000:37:09.0, OHCI version 1.0
[ 1.610872] usb 2-4: new high speed USB device using ehci_hcd and address 2
[ 1.622746] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.622751] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.622772] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.622776] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.742884] usb 2-4: New USB device found, idVendor=03f0, idProduct=2f24
[ 1.742887] usb 2-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.742960] usb 2-4: configuration #1 chosen from 1 choice
[ 1.743024] hub 2-4:1.0: USB hub found
[ 1.743129] hub 2-4:1.0: 6 ports detected
[ 1.790444] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.790460] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.791338] ata1.00: ATA-8: ST3500418AS, HP34, max UDMA/100
[ 1.791341] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.792450] ata1.00: configured for UDMA/100
[ 1.792545] ata5.00: ATAPI: hp DDVDW TS-H653R, 0E00, max UDMA/100
[ 1.794943] ata5.00: configured for UDMA/100
[ 1.810530] scsi 0:0:0:0: Direct-Access ATA ST3500418AS HP34 PQ: 0 ANSI: 5
[ 1.811186] scsi 4:0:0:0: CD-ROM hp CDDVDW TS-H653R 0E00 PQ: 0 ANSI: 5
[ 1.815978] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.816010] sd 0:0:0:0: [sda] Write Protect is off
[ 1.816012] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.816026] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.816116] sda: sda1 sda2 <sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.822348] Uniform CD-ROM driver Revision: 3.20
[ 1.822438] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 1.840396] sda5 >
[ 1.840603] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.843172] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.843196] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 1.858389] firewire_core: created device fw0: GUID 0060b0000026680e, S400
[ 2.002088] ioc0: LSISAS1068E B3: Capabilities={Initiator}
[ 2.002111] mptsas 0000:41:00.0: setting latency timer to 64
[ 2.018185] usb 2-4.1: new low speed USB device using ehci_hcd and address 3
[ 2.138603] usb 2-4.1: New USB device found, idVendor=03f0, idProduct=0024
[ 2.138607] usb 2-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.138610] usb 2-4.1: Product: HP Basic USB Keyboard
[ 2.138612] usb 2-4.1: Manufacturer: CHICONY
[ 2.138676] usb 2-4.1: configuration #1 chosen from 1 choice
[ 2.145099] usbcore: registered new interface driver hiddev
[ 2.148733] input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4.1/2-4.1:1.0/input/input1
[ 2.148772] generic-usb 0003:03F0:0024.0001: input,hidraw0: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:1d.7-4.1/input0
[ 2.148787] usbcore: registered new interface driver usbhid
[ 2.148789] usbhid: v2.6:USB HID core driver
[ 2.225842] usb 2-4.2: new low speed USB device using ehci_hcd and address 4
[ 2.325042] usb 2-4.2: New USB device found, idVendor=0461, idProduct=4d20
[ 2.325046] usb 2-4.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 2.325049] usb 2-4.2: Product: USB Optical Mouse
[ 2.325115] usb 2-4.2: configuration #1 chosen from 1 choice
[ 2.327033] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4.2/2-4.2:1.0/input/input2
[ 2.327076] generic-usb 0003:0461:4D20.0002: input,hidraw1: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.7-4.2/input0
[ 14.543941] scsi6 : ioc0: LSISAS1068E B3, FwRev=01190300h, Ports=1, MaxQ=266, IRQ=56
[ 14.667946] PM: Starting manual resume from disk
[ 14.667949] PM: Resume from partition 8:5
[ 14.667950] PM: Checking hibernation image.
[ 14.668096] PM: Error -22 checking image file
[ 14.668099] PM: Resume from disk failed.
[ 14.717375] kjournald starting. Commit interval 5 seconds
[ 14.717381] EXT3-fs: mounted filesystem with ordered data mode.
[ 16.120665] udev: starting version 160
[ 16.489430] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 16.665965] Monitor-Mwait will be used to enter C-1 state
[ 16.666044] Monitor-Mwait will be used to enter C-2 state
[ 16.666273] Monitor-Mwait will be used to enter C-3 state
[ 16.666539] processor LNXCPU:00: registered as cooling_device0
[ 16.667005] processor LNXCPU:01: registered as cooling_device1
[ 16.667114] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 16.667205] ACPI: Power Button [PBTN]
[ 16.667550] processor LNXCPU:02: registered as cooling_device2
[ 16.667612] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 16.667643] ACPI: Power Button [PWRF]
[ 16.667970] ACPI: WMI: Mapper loaded
[ 16.668294] processor LNXCPU:03: registered as cooling_device3
[ 16.669306] processor LNXCPU:04: registered as cooling_device4
[ 16.669841] processor LNXCPU:05: registered as cooling_device5
[ 16.670417] processor LNXCPU:06: registered as cooling_device6
[ 16.670973] processor LNXCPU:07: registered as cooling_device7
[ 16.821942] [drm] Initialized drm 1.1.0 20060810
[ 17.306179] alloc irq_desc for 24 on node -1
[ 17.306181] alloc kstat_irqs on node -1
[ 17.306188] nouveau 0000:0f:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
[ 17.306193] nouveau 0000:0f:00.0: setting latency timer to 64
[ 17.307267] [drm] nouveau 0000:0f:00.0: failed to evaluate _DSM: 5
[ 17.308097] [drm] nouveau 0000:0f:00.0: Detected an NV50 generation card (0x298e80a2)
[ 17.308961] [drm] nouveau 0000:0f:00.0: Attempting to load BIOS image from PRAMIN
[ 17.394828] [drm] nouveau 0000:0f:00.0: ... appears to be valid
[ 17.394830] [drm] nouveau 0000:0f:00.0: BIT BIOS found
[ 17.394832] [drm] nouveau 0000:0f:00.0: Bios version 62.98.66.00
[ 17.394834] [drm] nouveau 0000:0f:00.0: TMDS table revision 2.0 not currently supported
[ 17.394836] [drm] nouveau 0000:0f:00.0: Found Display Configuration Block version 4.0
[ 17.394838] [drm] nouveau 0000:0f:00.0: DCB connector table: VHER 0x40 5 16 4
[ 17.394840] [drm] nouveau 0000:0f:00.0: 0: 0x00005046: type 0x46 idx 0 tag 0x07
[ 17.394842] [drm] nouveau 0000:0f:00.0: 1: 0x0000a146: type 0x46 idx 1 tag 0x08
[ 17.394844] [drm] nouveau 0000:0f:00.0: Raw DCB entry 0: 02000386 0f200010
[ 17.394846] [drm] nouveau 0000:0f:00.0: Raw DCB entry 1: 02000332 00020010
[ 17.394848] [drm] nouveau 0000:0f:00.0: Raw DCB entry 2: 040113a6 0f200010
[ 17.394849] [drm] nouveau 0000:0f:00.0: Raw DCB entry 3: 04011342 00020010
[ 17.394857] [drm] nouveau 0000:0f:00.0: Parsing VBIOS init table 0 at offset 0xDEDB
[ 17.444159] [drm] nouveau 0000:0f:00.0: Parsing VBIOS init table 1 at offset 0xE2E0
[ 17.467940] [drm] nouveau 0000:0f:00.0: Parsing VBIOS init table 2 at offset 0xEAB2
[ 17.467951] [drm] nouveau 0000:0f:00.0: Parsing VBIOS init table 3 at offset 0xEB80
[ 17.480012] [drm] nouveau 0000:0f:00.0: Parsing VBIOS init table 4 at offset 0xEE29
[ 17.480015] [drm] nouveau 0000:0f:00.0: Parsing VBIOS init table at offset 0xEE8E
[ 17.503883] [drm] nouveau 0000:0f:00.0: 0xEE8E: Condition still not met after 20ms, skipping following opcodes
[ 17.503893] [drm] nouveau 0000:0f:00.0: 0xD010: parsing output script 0
[ 17.503895] [drm] nouveau 0000:0f:00.0: 0xCD44: parsing output script 0
[ 17.503901] [drm] nouveau 0000:0f:00.0: 0xD010: parsing output script 0
[ 17.503904] [drm] nouveau 0000:0f:00.0: 0xCD44: parsing output script 0
[ 17.639047] [TTM] Zone kernel: Available graphics memory: 12363162 kiB.
[ 17.639050] [TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[ 17.639061] [drm] nouveau 0000:0f:00.0: 256 MiB VRAM
[ 17.641704] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 17.641963] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 17.712113] [drm] nouveau 0000:0f:00.0: 512 MiB GART (aperture)
[ 17.715562] [drm] nouveau 0000:0f:00.0: Allocating FIFO number 1
[ 17.731219] [drm] nouveau 0000:0f:00.0: nouveau_channel_alloc: initialised FIFO 1
[ 17.734407] [drm] nouveau 0000:0f:00.0: Detected a DP output
[ 17.734409] [drm] nouveau 0000:0f:00.0: Detected a TMDS output
[ 17.734410] [drm] nouveau 0000:0f:00.0: Detected a DP output
[ 17.734412] [drm] nouveau 0000:0f:00.0: Detected a TMDS output
[ 17.734415] [drm] nouveau 0000:0f:00.0: Detected a DisplayPort connector
[ 17.734453] [drm] nouveau 0000:0f:00.0: Detected a DisplayPort connector
[ 17.743227] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[ 17.968478] [drm] nouveau 0000:0f:00.0: allocated 1920x1200 fb: 0x40250000, bo ffff88032d9fb600
[ 17.975068] [drm] nouveau 0000:0f:00.0: 0xCD62: parsing output script 1
[ 17.975084] [drm] nouveau 0000:0f:00.0: 0xCD70: parsing output script 2
[ 17.975098] [drm] nouveau 0000:0f:00.0: 0xCBAF: parsing clock script 0
[ 17.975362] [drm] nouveau 0000:0f:00.0: 0xC2C2: parsing clock script 1
[ 17.976850] Console: switching to colour frame buffer device 240x75
[ 17.979513] fb0: nouveaufb frame buffer device
[ 17.979514] registered panic notifier
[ 17.979517]
 
Old 07-21-2010, 10:41 PM
Vincent Lefevre
 
Default Bug#581830: linux-image-2.6.32-5-amd64: console and X display do not work unless nouveau is blacklisted

tags 581830 fixed-upstream
thanks

See https://bugs.freedesktop.org/show_bug.cgi?id=28140

--
Vincent Lefèvre <vincent@vinc17.net> - Web: <http://www.vinc17.net/>
100% accessible validated (X)HTML - Blog: <http://www.vinc17.net/blog/>
Work: CR INRIA - computer arithmetic / Arénaire project (LIP, ENS-Lyon)



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20100721224122.GA19538@prunille.vinc17.org">http://lists.debian.org/20100721224122.GA19538@prunille.vinc17.org
 

Thread Tools




All times are GMT. The time now is 09:45 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright ©2007 - 2008, www.linux-archive.org