FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 04-04-2010, 08:01 AM
Abhishek Dasgupta
 
Default Bug#576400: linux-image-2.6.32-3-amd64: CPU beep does not go away on removing pcspkr

Package: linux-2.6
Version: 2.6.32-9
Severity: normal


I was not sure which package to file this bug against.

I have rmmod'ed pcspkr and snd_pcsp. I have also put these in
/etc/modprobe.d/blacklist.conf. GDM beeps on boot, as does one of
the user accounts (on error in the terminal and when typing passwords).
Another user account uses the system beep sound as specified in
Sound preferences. I have pulseaudio installed.

-- Package-specific info:
** Version:
Linux version 2.6.32-3-amd64 (Debian 2.6.32-9) (maks@debian.org) (gcc version 4.3.4 (Debian 4.3.4-8) ) #1 SMP Wed Feb 24 18:07:42 UTC 2010

** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-3-amd64 root=UUID=2217a02f-e7ff-411d-b5a7-e63e39bb856e ro quiet vga=791

** Not tainted

** Kernel log:
[ 1.310917] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.310920] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.310930] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 1.310953] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002040
[ 1.310987] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.310990] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.310993] usb usb6: Product: UHCI Host Controller
[ 1.310995] usb usb6: Manufacturer: Linux 2.6.32-3-amd64 uhci_hcd
[ 1.310997] usb usb6: SerialNumber: 0000:00:1d.1
[ 1.311065] usb usb6: configuration #1 chosen from 1 choice
[ 1.311095] hub 6-0:1.0: USB hub found
[ 1.311103] hub 6-0:1.0: 2 ports detected
[ 1.311151] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.311157] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.311160] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.311168] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 1.311190] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002020
[ 1.311224] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.311226] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.311229] usb usb7: Product: UHCI Host Controller
[ 1.311231] usb usb7: Manufacturer: Linux 2.6.32-3-amd64 uhci_hcd
[ 1.311233] usb usb7: SerialNumber: 0000:00:1d.2
[ 1.311293] usb usb7: configuration #1 chosen from 1 choice
[ 1.311326] hub 7-0:1.0: USB hub found
[ 1.311333] hub 7-0:1.0: 2 ports detected
[ 1.620040] usb 6-2: new full speed USB device using uhci_hcd and address 2
[ 1.642642] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.653272] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.698641] ata4.00: SATA link down (SStatus 0 SControl 300)
[ 1.698654] ata4.01: SATA link down (SStatus 4 SControl 300)
[ 1.789981] usb 6-2: New USB device found, idVendor=058f, idProduct=9254
[ 1.789985] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.789988] usb 6-2: Product: Generic USB Hub
[ 1.789990] usb 6-2: Manufacturer: ALCOR
[ 1.790074] usb 6-2: configuration #1 chosen from 1 choice
[ 1.793018] hub 6-2:1.0: USB hub found
[ 1.794981] hub 6-2:1.0: 4 ports detected
[ 1.972078] ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.972090] ata3.01: SATA link down (SStatus 4 SControl 300)
[ 2.022701] ata3.00: ATA-7: ST3160211AS, 3.AAE, max UDMA/133
[ 2.022705] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.089358] ata3.00: configured for UDMA/133
[ 2.089468] scsi 2:0:0:0: Direct-Access ATA ST3160211AS 3.AA PQ: 0 ANSI: 5
[ 2.096849] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.096898] sd 2:0:0:0: [sda] Write Protect is off
[ 2.096901] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.096926] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.097067] sda: sda1 sda2 < sda5 sda6 sda7 > sda3
[ 2.180004] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.194397] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.194401] Uniform CD-ROM driver Revision: 3.20
[ 2.194510] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 2.198029] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 2.198355] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 2.662717] PM: Starting manual resume from disk
[ 2.662720] PM: Resume from partition 8:7
[ 2.662722] PM: Checking hibernation image.
[ 2.671472] PM: Error -22 checking image file
[ 2.671474] PM: Resume from disk failed.
[ 2.723980] EXT4-fs (sda6): mounted filesystem with ordered data mode
[ 3.923019] udev: starting version 151
[ 4.571003] parport_pc 00:07: reported by Plug and Play ACPI
[ 4.571083] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 4.579771] processor LNXCPU:00: registered as cooling_device0
[ 4.579932] processor LNXCPU:01: registered as cooling_device1
[ 4.796991] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 4.951835] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[ 5.171567] alloc irq_desc for 22 on node -1
[ 5.171570] alloc kstat_irqs on node -1
[ 5.171579] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 5.171612] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 5.564170] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
[ 5.764191] input: HDA Intel Line In at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 5.764296] input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 5.764367] input: HDA Intel Mic at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 5.764435] input: HDA Intel Mic at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 5.764505] input: HDA Intel Line In at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 5.764575] input: HDA Intel Line Out at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 5.764645] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 6.150353] Adding 979924k swap on /dev/sda7. Priority:-1 extents:1 across:979924k
[ 7.237897] kjournald starting. Commit interval 5 seconds
[ 7.238053] EXT3 FS on sda3, internal journal
[ 7.238058] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.630015] loop: module loaded
[ 8.024248] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
[ 8.080103] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
[ 8.080326] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8.119882] fuse init (API version 7.13)
[ 9.577359] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 9.577363] 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 9.577556] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 20.192007] eth0: no IPv6 routers present
[ 121.148767] CPU0 attaching NULL sched-domain.
[ 121.148773] CPU1 attaching NULL sched-domain.
[ 121.176590] CPU0 attaching sched-domain:
[ 121.176594] domain 0: span 0-1 level MC
[ 121.176597] groups: 0 1
[ 121.176604] CPU1 attaching sched-domain:
[ 121.176607] domain 0: span 0-1 level MC
[ 121.176610] groups: 1 0

** Model information
sys_vendor:
product_name:
product_version:
chassis_vendor:
chassis_version:
bios_vendor: Intel Corp.
bios_version: MQ96510J.86A.1687.2007.0510.0258
board_vendor: Intel Corporation
board_name: DG965RY
board_version: AAD41691-301

** Loaded modules:
Module Size Used by
acpi_cpufreq 5555 0
cpufreq_stats 2659 0
cpufreq_powersave 902 0
cpufreq_userspace 1992 0
cpufreq_conservative 5162 0
binfmt_misc 6431 1
fuse 50110 1
loop 11783 0
firewire_sbp2 11466 0
ext3 106486 1
jbd 37053 1 ext3
snd_hda_codec_idt 42417 1
snd_hda_intel 19619 2
snd_hda_codec 54212 2 snd_hda_codec_idt,snd_hda_intel
snd_hwdep 5364 1 snd_hda_codec
snd_pcm_oss 32591 0
snd_mixer_oss 12606 1 snd_pcm_oss
snd_pcm 60615 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_timer 15502 1 snd_pcm
i2c_i801 7798 0
snd 46350 12 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_ hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 4598 1 snd
snd_page_alloc 6217 2 snd_hda_intel,snd_pcm
processor 30215 1 acpi_cpufreq
parport_pc 18855 0
parport 27938 1 parport_pc
serio_raw 3752 0
evdev 7336 8
psmouse 49505 0
ext4 285099 1
mbcache 4970 2 ext3,ext4
jbd2 66887 1 ext4
crc16 1319 1 ext4
sg 18728 0
sr_mod 12602 0
cdrom 29399 1 sr_mod
sd_mod 29689 4
crc_t10dif 1276 1 sd_mod
ata_generic 2983 0
uhci_hcd 18505 0
ide_pci_generic 2788 0
i915 248774 2
drm_kms_helper 18899 1 i915
ide_core 76850 1 ide_pci_generic
drm 137190 3 i915,drm_kms_helper
i2c_algo_bit 4225 1 i915
firewire_ohci 19484 0
pata_marvell 2629 0
intel_agp 25593 1
i2c_core 15584 4 i2c_i801,i915,drm,i2c_algo_bit
video 17445 1 i915
firewire_core 36688 2 firewire_sbp2,firewire_ohci
crc_itu_t 1307 1 firewire_core
ata_piix 19773 3
button 4634 1 i915
libata 132183 3 ata_generic,pata_marvell,ata_piix
scsi_mod 121925 5 firewire_sbp2,sg,sr_mod,sd_mod,libata
ehci_hcd 30706 0
usbcore 121703 3 uhci_hcd,ehci_hcd
output 1692 1 video
e1000e 109919 0
nls_base 6377 1 usbcore
thermal 11674 0
fan 3346 0
thermal_sys 11878 4 processor,video,thermal,fan

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82P965/G965 Memory Controller Hub [8086:29a0] (rev 02)
Subsystem: Intel Corporation Device [8086:514d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller [0300]: Intel Corporation 82G965 Integrated Graphics Controller [8086:29a2] (rev 02) (prog-if 00 [VGA controller])
Subsystem: Intel Corporation Device [8086:514d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 30
Region 0: Memory at 50200000 (32-bit, non-prefetchable) [size=1M]
Region 2: Memory at 40000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 2440 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915

00:03.0 Communication controller [0780]: Intel Corporation 82P965/G965 HECI Controller [8086:29a4] (rev 02)
Subsystem: Intel Corporation Device [8086:514d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 50325900 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>

00:19.0 Ethernet controller [0200]: Intel Corporation 82566DC Gigabit Network Connection [8086:104b] (rev 02)
Subsystem: Intel Corporation Device [8086:0001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 29
Region 0: Memory at 50300000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at 50324000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 20c0 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e

00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:514d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 20a0 [size=32]
Kernel driver in use: uhci_hcd

00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:514d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 2080 [size=32]
Kernel driver in use: uhci_hcd

00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 02) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Device [8086:514d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at 50325400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 02)
Subsystem: Intel Corporation Device [8086:2113]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at 50320000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: 50400000-505fffff
Prefetchable memory behind bridge: 0000000050600000-00000000507fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 50100000-501fffff
Prefetchable memory behind bridge: 0000000050800000-00000000509fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.2 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 [8086:2843] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: 50a00000-50bfffff
Prefetchable memory behind bridge: 0000000050c00000-0000000050dfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.3 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 [8086:2845] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: 50e00000-50ffffff
Prefetchable memory behind bridge: 0000000051000000-00000000511fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 [8086:2847] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 00006000-00006fff
Memory behind bridge: 51200000-513fffff
Prefetchable memory behind bridge: 0000000051400000-00000000515fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:514d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 2060 [size=32]
Kernel driver in use: uhci_hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:514d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 2040 [size=32]
Kernel driver in use: uhci_hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:514d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 2020 [size=32]
Kernel driver in use: uhci_hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 02) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Device [8086:514d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at 50325000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev f2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=06, subordinate=06, sec-latency=32
Memory behind bridge: 50000000-500fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801HB/HR (ICH8/R) LPC Interface Controller [8086:2810] (rev 02)
Subsystem: Intel Corporation Device [8086:514d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>

00:1f.2 IDE interface [0101]: Intel Corporation 82801H (ICH8 Family) 4 port SATA IDE Controller [8086:2820] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Intel Corporation Device [8086:514d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at 2438 [size=8]
Region 1: I/O ports at 2454 [size=4]
Region 2: I/O ports at 2430 [size=8]
Region 3: I/O ports at 2450 [size=4]
Region 4: I/O ports at 2410 [size=16]
Region 5: I/O ports at 2400 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix

00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 02)
Subsystem: Intel Corporation Device [8086:514d]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 21
Region 0: Memory at 50325800 (32-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 2000 [size=32]
Kernel driver in use: i801_smbus

00:1f.5 IDE interface [0101]: Intel Corporation 82801H (ICH8 Family) 2 port SATA IDE Controller [8086:2825] (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: Intel Corporation Device [8086:514d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at 2428 [size=8]
Region 1: I/O ports at 244c [size=4]
Region 2: I/O ports at 2420 [size=8]
Region 3: I/O ports at 2448 [size=4]
Region 4: I/O ports at 20f0 [size=16]
Region 5: I/O ports at 20e0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix

02:00.0 IDE interface [0101]: Marvell Technology Group Ltd. 88SE6101 single-port PATA133 interface [11ab:6101] (rev b1) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Marvell Technology Group Ltd. 88SE6101 single-port PATA133 interface [11ab:6101]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at 1018 [size=8]
Region 1: I/O ports at 1024 [size=4]
Region 2: I/O ports at 1010 [size=8]
Region 3: I/O ports at 1020 [size=4]
Region 4: I/O ports at 1000 [size=16]
Region 5: Memory at 50100000 (32-bit, non-prefetchable) [size=512]
Capabilities: <access denied>
Kernel driver in use: pata_marvell

06:03.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) [104c:8023] (prog-if 10 [OHCI])
Subsystem: Intel Corporation Device [8086:514d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at 50004000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at 50000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci


** USB devices:
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 058f:9254 Alcor Micro Corp. Hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.32-3-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_IN, LC_CTYPE=en_IN (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-2.6.32-3-amd64 depends on:
ii debconf [debconf-2.0] 1.5.28 Debian configuration management sy
ii initramfs-tools [linux-initr 0.93.4 tools for generating an initramfs
ii module-init-tools 3.12~pre2-1 tools for managing Linux kernel mo

Versions of packages linux-image-2.6.32-3-amd64 recommends:
pn firmware-linux-free <none> (no description available)

Versions of packages linux-image-2.6.32-3-amd64 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)

Versions of packages linux-image-2.6.32-3-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)

-- debconf information:
linux-image-2.6.32-3-amd64/postinst/depmod-error-initrd-2.6.32-3-amd64: false
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-3-amd64/prerm/removing-running-kernel-2.6.32-3-amd64: true
linux-image-2.6.32-3-amd64/postinst/bootloader-test-error-2.6.32-3-amd64:
linux-image-2.6.32-3-amd64/postinst/missing-firmware-2.6.32-3-amd64:
linux-image-2.6.32-3-amd64/prerm/would-invalidate-boot-loader-2.6.32-3-amd64: true
linux-image-2.6.32-3-amd64/postinst/bootloader-error-2.6.32-3-amd64:

--
Abhishek Dasgupta; GPG key 67972D0F
(find at keyserver.mit.edu | http://abhidg.googlepages.com/abhidg.asc)
 

Thread Tools




All times are GMT. The time now is 02:42 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org