Linux Archive

Linux Archive (http://www.linux-archive.org/)
-   Debian Kernel (http://www.linux-archive.org/debian-kernel/)
-   -   Bug#575924: linux-image-2.6.32-4-amd64: fuse module oops on boot (http://www.linux-archive.org/debian-kernel/349233-bug-575924-linux-image-2-6-32-4-amd64-fuse-module-oops-boot.html)

Denis Laxalde 03-30-2010 03:40 PM

Bug#575924: linux-image-2.6.32-4-amd64: fuse module oops on boot
 
Package: linux-2.6
Version: 2.6.32-10
Severity: important

Boot fails from time to time. A relevant dmesg is attached.
Please let me know if you need more info.

Cheers,

Denis

-- Package-specific info:
** Version:
Linux version 2.6.32-4-amd64 (Debian 2.6.32-10) (maks@debian.org) (gcc version 4.3.4 (Debian 4.3.4-8) ) #1 SMP Wed Mar 17 03:23:53 UTC 2010

** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-4-amd64 root=UUID=8241092d-8be2-4970-8b5f-587e76538cb5 ro quiet

** Not tainted

** Kernel log:
[ 4.937301] thinkpad_acpi: radio switch found; radios are disabled
[ 4.937389] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 4.937391] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 4.940295] Registered led device: tpacpi::thinklight
[ 4.940320] Registered led device: tpacpi::power
[ 4.940332] Registered led device: tpacpi::standby
[ 4.940344] Registered led device: tpacpi::thinkvantage
[ 4.940510] phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 4.942754] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one.
[ 4.943124] input: ThinkPad Extra Buttons as /devices/virtual/input/input8
[ 5.092063] usb 6-2: new low speed USB device using uhci_hcd and address 2
[ 5.094451] r600_cp: Failed to load firmware "radeon/RV635_pfp.bin"
[ 5.094514] [drm:r600_startup] *ERROR* Failed to load firmware!
[ 5.094572] radeon 0000:01:00.0: disabling GPU acceleration
[ 5.094656] radeon 0000:01:00.0: ffff8800b9257000 unpin not necessary
[ 5.094658] radeon 0000:01:00.0: ffff8800b9257000 unpin not necessary
[ 5.094671] [drm] Enabling audio support
[ 5.094935] [drm] Radeon Display Connectors
[ 5.094937] [drm] Connector 0:
[ 5.094938] [drm] DVI-I
[ 5.094939] [drm] HPD3
[ 5.094940] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[ 5.094942] [drm] Encoders:
[ 5.094943] [drm] DFP1: INTERNAL_UNIPHY
[ 5.094944] [drm] Connector 1:
[ 5.094945] [drm] LVDS
[ 5.094946] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 5.094947] [drm] Encoders:
[ 5.094948] [drm] LCD1: INTERNAL_KLDSCP_LVTMA
[ 5.094950] [drm] Connector 2:
[ 5.094951] [drm] DisplayPort
[ 5.094952] [drm] HPD1
[ 5.094953] [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[ 5.094954] [drm] Encoders:
[ 5.094955] [drm] DFP2: INTERNAL_UNIPHY
[ 5.094956] [drm] Connector 3:
[ 5.094957] [drm] VGA
[ 5.094959] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 5.094960] [drm] Encoders:
[ 5.094961] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 5.203123] sdhci: Secure Digital Host Controller Interface driver
[ 5.203125] sdhci: Copyright(c) Pierre Ossman
[ 5.260625] usb 6-2: New USB device found, idVendor=0461, idProduct=4d22
[ 5.260627] usb 6-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 5.260629] usb 6-2: Product: USB Optical Mouse
[ 5.260713] usb 6-2: configuration #1 chosen from 1 choice
[ 5.323246] [drm] fb mappable at 0xD0040000
[ 5.323248] [drm] vram apper at 0xD0000000
[ 5.323249] [drm] size 7257600
[ 5.323250] [drm] fb depth is 24
[ 5.323251] [drm] pitch is 6912
[ 5.390594] sdhci-pci 0000:15:00.2: SDHCI controller found [1180:0822] (rev 21)
[ 5.390614] sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 5.391634] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
[ 5.392668] Registered led device: mmc0::
[ 5.393685] mmc0: SDHCI controller on PCI [0000:15:00.2] using DMA
[ 5.491958] usbcore: registered new interface driver hiddev
[ 5.504845] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input9
[ 5.504937] generic-usb 0003:0461:4D22.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-2/input0
[ 5.504965] usbcore: registered new interface driver usbhid
[ 5.504967] usbhid: v2.6:USB HID core driver
[ 5.785090] Linux video capture interface: v2.00
[ 5.792209] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 5.792233] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 5.841586] uvcvideo: Found UVC 1.00 device <unnamed> (17ef:4807)
[ 5.842886] input: UVC Camera (17ef:4807) as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input10
[ 5.842932] usbcore: registered new interface driver uvcvideo
[ 5.842933] USB Video Class driver (v0.1.0)
[ 6.147741] Console: switching to colour frame buffer device 210x65
[ 6.151418] fb0: radeondrmfb frame buffer device
[ 6.151419] registered panic notifier
[ 6.151752] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
[ 6.268751] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 6.268818] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 6.268867] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 6.268915] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 7.008999] Adding 2925680k swap on /dev/sda5. Priority:-1 extents:1 across:2925680k
[ 7.678751] EXT4-fs (sda8): mounted filesystem with ordered data mode
[ 8.044248] loop: module loaded
[ 8.684722] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
[ 8.740111] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
[ 8.740630] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8.833465] fuse init (API version 7.13)
[ 9.147515] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input15
[ 10.308886] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 10.308894] 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 10.310312] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 10.816797] lp: driver loaded but no devices found
[ 10.831967] ppdev: user-space parallel port driver
[ 10.925726] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 11.161078] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input16
[ 20.580090] eth0: no IPv6 routers present
[ 33.442659] CPU0 attaching NULL sched-domain.
[ 33.442663] CPU1 attaching NULL sched-domain.
[ 33.468064] CPU0 attaching sched-domain:
[ 33.468066] domain 0: span 0-1 level MC
[ 33.468068] groups: 0 1
[ 33.468072] CPU1 attaching sched-domain:
[ 33.468073] domain 0: span 0-1 level MC
[ 33.468075] groups: 1 0

** Model information
sys_vendor: LENOVO
product_name: 2081CTO
product_version: ThinkPad T500
chassis_vendor: LENOVO
chassis_version: Not Available
bios_vendor: LENOVO
bios_version: 7VET80WW (3.10 )
board_vendor: LENOVO
board_name: 2081CTO
board_version: Not Available

** Loaded modules:
Module Size Used by
ppdev 5030 0
lp 7462 0
parport 27938 2 ppdev,lp
acpi_cpufreq 5555 0
cpufreq_stats 2659 0
cpufreq_conservative 5162 0
cpufreq_powersave 902 0
cpufreq_userspace 1992 0
uinput 6376 1
fuse 50110 1
loop 11783 0
firewire_sbp2 11466 0
snd_hda_codec_conexant 21789 1
uvcvideo 51695 0
snd_hda_intel 19683 2
videodev 29993 1 uvcvideo
v4l1_compat 11442 2 uvcvideo,videodev
snd_hda_codec 54212 2 snd_hda_codec_conexant,snd_hda_intel
snd_hwdep 5364 1 snd_hda_codec
v4l2_compat_ioctl32 8538 1 videodev
snd_pcm_oss 32591 0
snd_mixer_oss 12606 1 snd_pcm_oss
snd_pcm 60439 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_midi 4400 0
usbhid 33260 0
snd_rawmidi 15483 1 snd_seq_midi
hid 62793 1 usbhid
sdhci_pci 5581 0
snd_seq_midi_event 4628 1 snd_seq_midi
sdhci 13982 1 sdhci_pci
joydev 8411 0
thinkpad_acpi 50075 0
wmi 4307 0
snd_seq 42817 2 snd_seq_midi,snd_seq_midi_event
pcmcia 19426 0
arc4 1274 2
mmc_core 45520 1 sdhci
radeon 551202 2
ecb 1841 2
snd_timer 15502 2 snd_pcm,snd_seq
ttm 40002 1 radeon
uhci_hcd 18505 0
iwlagn 71740 0
drm_kms_helper 20049 1 radeon
snd_seq_device 4477 3 snd_seq_midi,snd_rawmidi,snd_seq
yenta_socket 19115 1
iwlcore 78213 1 iwlagn
sg 18728 0
rsrc_nonstatic 7294 1 yenta_socket
serio_raw 3752 0
mac80211 136220 2 iwlagn,iwlcore
snd 46350 15 snd_hda_codec_conexant,snd_hda_intel,snd_hda_codec ,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_r awmidi,snd_seq,snd_timer,snd_seq_device
e1000e 109935 0
drm 142263 4 radeon,ttm,drm_kms_helper
ehci_hcd 30722 0
firewire_ohci 19484 0
sr_mod 12602 0
i2c_i801 7798 0
i2c_algo_bit 4225 1 radeon
usbcore 121767 5 uvcvideo,usbhid,uhci_hcd,ehci_hcd
firewire_core 36688 2 firewire_sbp2,firewire_ohci
nvram 5061 1 thinkpad_acpi
evdev 7336 19
psmouse 49505 0
video 17445 0
pcmcia_core 24070 3 pcmcia,yenta_socket,rsrc_nonstatic
pcspkr 1699 0
i2c_core 15584 6 videodev,radeon,drm_kms_helper,drm,i2c_i801,i2c_al go_bit
cdrom 29399 1 sr_mod
ricoh_mmc 3069 0
battery 4998 0
ac 2192 0
output 1692 1 video
button 4634 0
nls_base 6377 1 usbcore
crc_itu_t 1307 1 firewire_core
soundcore 4598 1 snd
processor 30247 3 acpi_cpufreq
cfg80211 101416 3 iwlagn,iwlcore,mac80211
led_class 2401 3 sdhci,thinkpad_acpi,iwlcore
snd_page_alloc 6217 2 snd_hda_intel,snd_pcm
rfkill 13012 2 thinkpad_acpi,cfg80211
ext4 285131 2
mbcache 4970 1 ext4
jbd2 66887 1 ext4
crc16 1319 1 ext4
sd_mod 29689 4
crc_t10dif 1276 1 sd_mod
thermal 11674 0
fan 3346 0
thermal_sys 11878 4 video,processor,thermal,fan
ahci 32070 3
libata 132199 1 ahci
scsi_mod 121941 5 firewire_sbp2,sg,sr_mod,sd_mod,libata

** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
allow-hotplug eth0
iface eth0 inet dhcp

** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 100
link/ether 00:27:13:68:1b:6c brd ff:ff:ff:ff:ff:ff
inet 132.206.129.30/24 brd 132.206.129.255 scope global eth0
inet6 fe80::227:13ff:fe68:1b6c/64 scope link
valid_lft forever preferred_lft forever
3: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 00:26:c6:76:7d:be brd ff:ff:ff:ff:ff:ff

*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 1040 16 0 0 0 0 0 0 1040 16 0 0 0 0 0 0
eth0: 4558653 11206 0 0 0 0 0 34 595028 8464 0 0 0 0 0 0
wlan0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

*** Protocol statistics:
Ip:
10064 total packets received
5 with invalid addresses
0 forwarded
0 incoming packets discarded
10059 incoming packets delivered
8461 requests sent out
Icmp:
0 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
8 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 8
IcmpMsg:
OutType3: 8
Tcp:
150 active connections openings
0 passive connection openings
8 failed connection attempts
6 connection resets received
4 connections established
3701 segments received
3156 segments send out
10 segments retransmited
1 bad segments received.
280 resets sent
Udp:
5281 packets received
8 packets to unknown port received.
0 packet receive errors
5291 packets sent
UdpLite:
TcpExt:
23 TCP sockets finished time wait in fast timer
96 delayed acks sent
Quick ack mode was activated 33 times
2277 packet headers predicted
259 acknowledgments not containing data payload received
116 predicted acknowledgments
1 congestion windows recovered without slow start after partial ack
6 other TCP timeouts
33 DSACKs sent for old packets
3 DSACKs received
3 connections aborted due to timeout
IpExt:
InMcastPkts: 34
OutMcastPkts: 2
InBcastPkts: 1043
InOctets: 4309827
OutOctets: 475756
InMcastOctets: 952
OutMcastOctets: 321
InBcastOctets: 120733

*** Device features:
eth0: 0x9a9
lo: 0x13865
wlan0: 0x2000

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07)
Subsystem: Lenovo Device [17aa:20e0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>

00:01.0 PCI bridge [0604]: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port [8086:2a41] (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: cff00000-cfffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:03.0 Communication controller [0780]: Intel Corporation Mobile 4 Series Chipset MEI Controller [8086:2a44] (rev 07)
Subsystem: Lenovo Device [17aa:20e6]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at fc225800 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>

00:19.0 Ethernet controller [0200]: Intel Corporation 82567LF Gigabit Network Connection [8086:10bf] (rev 03)
Subsystem: Lenovo Device [17aa:20ee]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 30
Region 0: Memory at fc200000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at fc224000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 1800 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e

00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Device [17aa:20f0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 1820 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Device [17aa:20f0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 1840 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Device [17aa:20f0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at 1860 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI])
Subsystem: Lenovo Device [17aa:20f1]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 0: Memory at fc225c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)
Subsystem: Lenovo Device [17aa:20f2]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fc220000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00009000-00009fff
Memory behind bridge: bc000000-bc1fffff
Prefetchable memory behind bridge: 00000000bc200000-00000000bc3fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: f4200000-f42fffff
Prefetchable memory behind bridge: 00000000bc400000-00000000bc5fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 [8086:2946] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=0c, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f8000000-f9ffffff
Prefetchable memory behind bridge: 00000000f4000000-00000000f40fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0d, subordinate=14, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: fa000000-fbffffff
Prefetchable memory behind bridge: 00000000f4100000-00000000f41fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Device [17aa:20f0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 1880 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Device [17aa:20f0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 18a0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Device [17aa:20f0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 18c0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI])
Subsystem: Lenovo Device [17aa:20f1]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 0: Memory at fc226000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=15, subordinate=18, sec-latency=32
I/O behind bridge: 00005000-00008fff
Memory behind bridge: f4300000-f7ffffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f3ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M LPC Interface Controller [8086:2919] (rev 03)
Subsystem: Lenovo Device [17aa:20f6]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>

00:1f.2 SATA controller [0106]: Intel Corporation ICH9M/M-E SATA AHCI Controller [8086:2929] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: Lenovo Device [17aa:20f8]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 29
Region 0: I/O ports at 1c10 [size=8]
Region 1: I/O ports at 1c04 [size=4]
Region 2: I/O ports at 1c08 [size=8]
Region 3: I/O ports at 1c00 [size=4]
Region 4: I/O ports at 18e0 [size=32]
Region 5: Memory at fc225000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03)
Subsystem: Lenovo Device [17aa:20f9]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fc226400 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1c20 [size=32]
Kernel driver in use: i801_smbus

01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Mobility Radeon HD 3650 [1002:9591] (prog-if 00 [VGA controller])
Subsystem: Lenovo Device [17aa:2117]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at 2000 [size=256]
Region 2: Memory at cfff0000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at cff00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon

03:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection [8086:4237]
Subsystem: Intel Corporation PRO/Wireless 5100AGN Network Connection [8086:1211]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 31
Region 0: Memory at f4200000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlagn

15:00.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev ba)
Subsystem: Lenovo Device [17aa:20c6]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f4300000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=15, secondary=16, subordinate=17, sec-latency=176
Memory window 0: f0000000-f3fff000 (prefetchable)
Memory window 1: c0000000-c3fff000
I/O window 0: 00005000-000050ff
I/O window 1: 00005400-000054ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus

15:00.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 04) (prog-if 10 [OHCI])
Subsystem: Lenovo Device [17aa:20c7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f4301000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci

15:00.2 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 21)
Subsystem: Lenovo Device [17aa:20c8]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f4301800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci

15:00.3 System peripheral [0880]: Ricoh Co Ltd R5C843 MMC Host Controller [1180:0843] (rev ff) (prog-if ff)
!!! Unknown header type 7f
Kernel driver in use: ricoh-mmc

15:00.4 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 11)
Subsystem: Lenovo ThinkPad T61 [17aa:20ca]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 11
Region 0: Memory at f4302000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>

15:00.5 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev 11)
Subsystem: Lenovo Device [17aa:20cb]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 11
Region 0: Memory at f4302400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>


** USB devices:
Bus 006 Device 002: ID 0461:4d22 Primax Electronics, Ltd
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 17ef:4807 Lenovo
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing'), (50, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.32-4-amd64 (SMP w/2 CPU cores)
Locale: LANG=fr_CA.UTF-8, LC_CTYPE=fr_CA.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-2.6.32-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.28 Debian configuration management sy
ii initramfs-tools [linux-initr 0.93.4 tools for generating an initramfs
ii linux-base 2.6.32-10 Linux image base package
ii module-init-tools 3.12~pre2-1 tools for managing Linux kernel mo

Versions of packages linux-image-2.6.32-4-amd64 recommends:
ii firmware-linux-free 2.6.32-10 Binary firmware for various driver

Versions of packages linux-image-2.6.32-4-amd64 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)

Versions of packages linux-image-2.6.32-4-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
ii firmware-iwlwifi 0.23 Binary firmware for Intel Wireless
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)

-- debconf information:
linux-image-2.6.32-4-amd64/postinst/depmod-error-initrd-2.6.32-4-amd64: false
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-4-amd64/prerm/removing-running-kernel-2.6.32-4-amd64: true
linux-image-2.6.32-4-amd64/postinst/bootloader-error-2.6.32-4-amd64:
linux-image-2.6.32-4-amd64/prerm/would-invalidate-boot-loader-2.6.32-4-amd64: true
linux-image-2.6.32-4-amd64/postinst/missing-firmware-2.6.32-4-amd64:
linux-image-2.6.32-4-amd64/postinst/bootloader-test-error-2.6.32-4-amd64:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-4-amd64 (Debian 2.6.32-10) (maks@debian.org) (gcc version 4.3.4 (Debian 4.3.4-8) ) #1 SMP Wed Mar 17 03:23:53 UTC 2010
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-4-amd64 root=UUID=8241092d-8be2-4970-8b5f-587e76538cb5 ro quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bb8a1000 (usable)
[ 0.000000] BIOS-e820: 00000000bb8a1000 - 00000000bb8a7000 (reserved)
[ 0.000000] BIOS-e820: 00000000bb8a7000 - 00000000bb9b8000 (usable)
[ 0.000000] BIOS-e820: 00000000bb9b8000 - 00000000bba0f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bba0f000 - 00000000bbac7000 (usable)
[ 0.000000] BIOS-e820: 00000000bbac7000 - 00000000bbad2000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bbad2000 - 00000000bbad5000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bbad5000 - 00000000bbad9000 (reserved)
[ 0.000000] BIOS-e820: 00000000bbad9000 - 00000000bbadd000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bbadd000 - 00000000bbae0000 (reserved)
[ 0.000000] BIOS-e820: 00000000bbae0000 - 00000000bbb07000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bbb07000 - 00000000bbb08000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bbb08000 - 00000000bbd0f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bbd0f000 - 00000000bbd9f000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bbd9f000 - 00000000bbdff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bbdff000 - 00000000bbe00000 (usable)
[ 0.000000] BIOS-e820: 00000000bbe00000 - 00000000bc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0xbbe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DBFFF uncachable
[ 0.000000] DC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0BF000000 mask FFF000000 uncachable
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bbe00000
[ 0.000000] 0000000000 - 00bbe00000 page 2M
[ 0.000000] kernel direct mapping tables up to bbe00000 @ 8000-c000
[ 0.000000] RAMDISK: 37d8a000 - 37fefc9c
[ 0.000000] ACPI: RSDP 00000000000f6450 00024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 00000000bbd49c22 0008C (v01 LENOVO TP-7V 00003100 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000bbd49d00 000F4 (v03 LENOVO TP-7V 00003100 LNVO 00000001)
[ 0.000000] ACPI: DSDT 00000000bbd4a10e 0FAC1 (v01 LENOVO TP-7V 00003100 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000bbd8e000 00040
[ 0.000000] ACPI: SSDT 00000000bbd49eb4 0025A (v01 LENOVO TP-7V 00003100 MSFT 03000000)
[ 0.000000] ACPI: ECDT 00000000bbd59bcf 00052 (v01 LENOVO TP-7V 00003100 LNVO 00000001)
[ 0.000000] ACPI: APIC 00000000bbd59c21 00078 (v01 LENOVO TP-7V 00003100 LNVO 00000001)
[ 0.000000] ACPI: MCFG 00000000bbd59c99 0003C (v01 LENOVO TP-7V 00003100 LNVO 00000001)
[ 0.000000] ACPI: HPET 00000000bbd59cd5 00038 (v01 LENOVO TP-7V 00003100 LNVO 00000001)
[ 0.000000] ACPI: SLIC 00000000bbd59e62 00176 (v01 LENOVO TP-7V 00003100 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000bbd59fd8 00028 (v01 LENOVO TP-7V 00003100 LTP 00000001)
[ 0.000000] ACPI: SSDT 00000000bbd8d1fa 00568 (v01 LENOVO TP-7V 00003100 INTL 20050513)
[ 0.000000] ACPI: TCPA 00000000bbb07000 00032 (v00 00000000 00000000)
[ 0.000000] ACPI: SSDT 00000000bbad4000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 00000000bbad3000 00274 (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 00000000bbad2000 00242 (v01 PmRef ApTst 00003000 INTL 20050624)
[ 0.000000] ACPI: DMI detected: Lenovo ThinkPad T500
[ 0.000000] ACPI: Added _OSI(Linux)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000000bbe00000
[ 0.000000] Bootmem setup node 0 0000000000000000-00000000bbe00000
[ 0.000000] NODE_DATA [000000000000a000 - 0000000000011fff]
[ 0.000000] bootmap [0000000000012000 - 00000000000297bf] pages 18
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 00bbe00000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001673a94] TEXT DATA BSS ==> [0001000000 - 0001673a94]
[ 0.000000] #3 [0037d8a000 - 0037fefc9c] RAMDISK ==> [0037d8a000 - 0037fefc9c]
[ 0.000000] #4 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000]
[ 0.000000] #5 [0001674000 - 000167414c] BRK ==> [0001674000 - 000167414c]
[ 0.000000] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
[ 0.000000] found SMP MP-table at [ffff8800000f6490] f6490
[ 0.000000] [ffffea0000000000-ffffea00029fffff] PMD -> [ffff880001c00000-ffff8800045fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[5] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000bb8a1
[ 0.000000] 0: 0x000bb8a7 -> 0x000bb9b8
[ 0.000000] 0: 0x000bba0f -> 0x000bbac7
[ 0.000000] 0: 0x000bbdff -> 0x000bbe00
[ 0.000000] On node 0 totalpages: 768521
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 102 pages reserved
[ 0.000000] DMA zone: 3840 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10465 pages used for memmap
[ 0.000000] DMA32 zone: 754058 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bb8a1000 - 00000000bb8a7000
[ 0.000000] PM: Registered nosave memory: 00000000bb9b8000 - 00000000bba0f000
[ 0.000000] PM: Registered nosave memory: 00000000bbac7000 - 00000000bbad2000
[ 0.000000] PM: Registered nosave memory: 00000000bbad2000 - 00000000bbad5000
[ 0.000000] PM: Registered nosave memory: 00000000bbad5000 - 00000000bbad9000
[ 0.000000] PM: Registered nosave memory: 00000000bbad9000 - 00000000bbadd000
[ 0.000000] PM: Registered nosave memory: 00000000bbadd000 - 00000000bbae0000
[ 0.000000] PM: Registered nosave memory: 00000000bbae0000 - 00000000bbb07000
[ 0.000000] PM: Registered nosave memory: 00000000bbb07000 - 00000000bbb08000
[ 0.000000] PM: Registered nosave memory: 00000000bbb08000 - 00000000bbd0f000
[ 0.000000] PM: Registered nosave memory: 00000000bbd0f000 - 00000000bbd9f000
[ 0.000000] PM: Registered nosave memory: 00000000bbd9f000 - 00000000bbdff000
[ 0.000000] Allocating PCI resources starting at bc000000 (gap: bc000000:24000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff880001800000 s89880 r8192 d20712 u524288
[ 0.000000] pcpu-alloc: s89880 r8192 d20712 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 757898
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-4-amd64 root=UUID=8241092d-8be2-4970-8b5f-587e76538cb5 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3021208k/3078144k available (3031k kernel code, 4060k absent, 52876k reserved, 1879k data, 580k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:440
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2660.005 MHz processor.
[ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 5320.01 BogoMIPS (lpj=10640020)
[ 0.004024] Security Framework initialized
[ 0.004029] SELinux: Disabled at boot.
[ 0.004287] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.006200] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.007220] Mount-cache hash table entries: 256
[ 0.008092] Initializing cgroup subsys ns
[ 0.008096] Initializing cgroup subsys cpuacct
[ 0.008099] Initializing cgroup subsys devices
[ 0.008101] Initializing cgroup subsys freezer
[ 0.008102] Initializing cgroup subsys net_cls
[ 0.008125] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008126] CPU: L2 cache: 3072K
[ 0.008129] CPU 0/0x0 -> Node 0
[ 0.008131] CPU: Physical Processor ID: 0
[ 0.008132] CPU: Processor Core ID: 0
[ 0.008135] mce: CPU supports 6 MCE banks
[ 0.008142] CPU0: Thermal monitoring enabled (TM2)
[ 0.008145] using mwait in idle threads.
[ 0.008147] Performance Events: Core2 events, Intel PMU driver.
[ 0.008151] ... version: 2
[ 0.008152] ... bit width: 40
[ 0.008153] ... generic registers: 2
[ 0.008154] ... value mask: 000000ffffffffff
[ 0.008156] ... max period: 000000007fffffff
[ 0.008157] ... fixed-purpose events: 3
[ 0.008158] ... event mask: 0000000700000003
[ 0.008997] ACPI: Core revision 20090903
[ 0.032061] Setting APIC routing to flat
[ 0.032404] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.073252] CPU0: Intel(R) Core(TM)2 Duo CPU P8800 @ 2.66GHz stepping 0a
[ 0.076001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 3072K
[ 0.008000] CPU 1/0x1 -> Node 0
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.008000] CPU1: Thermal monitoring enabled (TM2)
[ 0.160111] CPU1: Intel(R) Core(TM)2 Duo CPU P8800 @ 2.66GHz stepping 0a
[ 0.160117] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.164014] Brought up 2 CPUs
[ 0.164016] Total of 2 processors activated (10639.97 BogoMIPS).
[ 0.164516] CPU0 attaching sched-domain:
[ 0.164519] domain 0: span 0-1 level MC
[ 0.164520] groups: 0 1
[ 0.164525] CPU1 attaching sched-domain:
[ 0.164527] domain 0: span 0-1 level MC
[ 0.164528] groups: 1 0
[ 0.164652] devtmpfs: initialized
[ 0.167618] regulator: core version 0.5
[ 0.167659] NET: Registered protocol family 16
[ 0.167746] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.167748] ACPI: bus type pci registered
[ 0.167809] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63
[ 0.167811] PCI: MCFG area at e0000000 reserved in E820
[ 0.170998] PCI: Using MMCONFIG at e0000000 - e3ffffff
[ 0.171000] PCI: Using configuration type 1 for base access
[ 0.171383] bio: create slab <bio-0> at 0
[ 0.172334] ACPI: EC: EC description table is found, configuring boot EC
[ 0.179791] ACPI: BIOS _OSI(Linux) query honored via DMI
[ 0.189968] ACPI: Interpreter enabled
[ 0.189971] ACPI: (supports S0 S3 S4 S5)
[ 0.189990] ACPI: Using IOAPIC for interrupt routing
[ 0.209261] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.209303] ACPI: Power Resource [PUBS] (on)
[ 0.209303] ACPI: ACPI Dock Station Driver: 3 docks/bays found
[ 0.209303] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.209344] DMAR: Forcing write-buffer flush capability
[ 0.209387] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.209390] pci 0000:00:01.0: PME# disabled
[ 0.209420] pci 0000:00:03.0: reg 10 64bit mmio: [0xfc225800-0xfc22580f]
[ 0.209448] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.209451] pci 0000:00:03.0: PME# disabled
[ 0.209537] pci 0000:00:19.0: reg 10 32bit mmio: [0xfc200000-0xfc21ffff]
[ 0.209544] pci 0000:00:19.0: reg 14 32bit mmio: [0xfc224000-0xfc224fff]
[ 0.209550] pci 0000:00:19.0: reg 18 io port: [0x1800-0x181f]
[ 0.212023] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.212026] pci 0000:00:19.0: PME# disabled
[ 0.212087] pci 0000:00:1a.0: reg 20 io port: [0x1820-0x183f]
[ 0.212171] pci 0000:00:1a.1: reg 20 io port: [0x1840-0x185f]
[ 0.212254] pci 0000:00:1a.2: reg 20 io port: [0x1860-0x187f]
[ 0.212339] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfc225c00-0xfc225fff]
[ 0.212399] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.212404] pci 0000:00:1a.7: PME# disabled
[ 0.212456] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfc220000-0xfc223fff]
[ 0.212509] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.212513] pci 0000:00:1b.0: PME# disabled
[ 0.212596] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.212599] pci 0000:00:1c.0: PME# disabled
[ 0.212684] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.212688] pci 0000:00:1c.1: PME# disabled
[ 0.212774] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.212778] pci 0000:00:1c.3: PME# disabled
[ 0.212864] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.212867] pci 0000:00:1c.4: PME# disabled
[ 0.212936] pci 0000:00:1d.0: reg 20 io port: [0x1880-0x189f]
[ 0.213020] pci 0000:00:1d.1: reg 20 io port: [0x18a0-0x18bf]
[ 0.213103] pci 0000:00:1d.2: reg 20 io port: [0x18c0-0x18df]
[ 0.213189] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfc226000-0xfc2263ff]
[ 0.213250] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.213254] pci 0000:00:1d.7: PME# disabled
[ 0.213491] pci 0000:00:1f.2: reg 10 io port: [0x1c10-0x1c17]
[ 0.213498] pci 0000:00:1f.2: reg 14 io port: [0x1c04-0x1c07]
[ 0.213504] pci 0000:00:1f.2: reg 18 io port: [0x1c08-0x1c0f]
[ 0.213511] pci 0000:00:1f.2: reg 1c io port: [0x1c00-0x1c03]
[ 0.213518] pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ff]
[ 0.213524] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfc225000-0xfc2257ff]
[ 0.213566] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.213569] pci 0000:00:1f.2: PME# disabled
[ 0.213607] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfc226400-0xfc2264ff]
[ 0.213623] pci 0000:00:1f.3: reg 20 io port: [0x1c20-0x1c3f]
[ 0.213681] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.213687] pci 0000:01:00.0: reg 14 io port: [0x2000-0x20ff]
[ 0.213692] pci 0000:01:00.0: reg 18 32bit mmio: [0xcfff0000-0xcfffffff]
[ 0.213710] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.213736] pci 0000:01:00.0: supports D1 D2
[ 0.213799] pci 0000:00:01.0: bridge io port: [0x2000-0x2fff]
[ 0.213801] pci 0000:00:01.0: bridge 32bit mmio: [0xcff00000-0xcfffffff]
[ 0.213805] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.213950] pci 0000:03:00.0: reg 10 64bit mmio: [0xf4200000-0xf4201fff]
[ 0.214060] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.214067] pci 0000:03:00.0: PME# disabled
[ 0.214166] pci 0000:00:1c.1: bridge 32bit mmio: [0xf4200000-0xf42fffff]
[ 0.214225] pci 0000:00:1c.3: bridge io port: [0x3000-0x3fff]
[ 0.214229] pci 0000:00:1c.3: bridge 32bit mmio: [0xf8000000-0xf9ffffff]
[ 0.214235] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xf4000000-0xf40fffff]
[ 0.214289] pci 0000:00:1c.4: bridge io port: [0x4000-0x4fff]
[ 0.214293] pci 0000:00:1c.4: bridge 32bit mmio: [0xfa000000-0xfbffffff]
[ 0.214300] pci 0000:00:1c.4: bridge 64bit mmio pref: [0xf4100000-0xf41fffff]
[ 0.214347] pci 0000:15:00.0: reg 10 32bit mmio: [0xf4300000-0xf4300fff]
[ 0.214373] pci 0000:15:00.0: supports D1 D2
[ 0.214375] pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.214380] pci 0000:15:00.0: PME# disabled
[ 0.214428] pci 0000:15:00.1: reg 10 32bit mmio: [0xf4301000-0xf43017ff]
[ 0.214494] pci 0000:15:00.1: supports D1 D2
[ 0.214496] pci 0000:15:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.214501] pci 0000:15:00.1: PME# disabled
[ 0.214548] pci 0000:15:00.2: reg 10 32bit mmio: [0xf4301800-0xf43018ff]
[ 0.214614] pci 0000:15:00.2: supports D1 D2
[ 0.214615] pci 0000:15:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.214620] pci 0000:15:00.2: PME# disabled
[ 0.214668] pci 0000:15:00.3: reg 10 32bit mmio: [0xf4301c00-0xf4301cff]
[ 0.214734] pci 0000:15:00.3: supports D1 D2
[ 0.214735] pci 0000:15:00.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.214740] pci 0000:15:00.3: PME# disabled
[ 0.214787] pci 0000:15:00.4: reg 10 32bit mmio: [0xf4302000-0xf43020ff]
[ 0.214853] pci 0000:15:00.4: supports D1 D2
[ 0.214855] pci 0000:15:00.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.214860] pci 0000:15:00.4: PME# disabled
[ 0.214907] pci 0000:15:00.5: reg 10 32bit mmio: [0xf4302400-0xf43024ff]
[ 0.214973] pci 0000:15:00.5: supports D1 D2
[ 0.214975] pci 0000:15:00.5: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.214980] pci 0000:15:00.5: PME# disabled
[ 0.215056] pci 0000:00:1e.0: transparent bridge
[ 0.215060] pci 0000:00:1e.0: bridge io port: [0x5000-0x8fff]
[ 0.215064] pci 0000:00:1e.0: bridge 32bit mmio: [0xf4300000-0xf7ffffff]
[ 0.215071] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xf0000000-0xf3ffffff]
[ 0.215125] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.215257] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.215318] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
[ 0.215374] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.215433] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[ 0.215496] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
[ 0.215557] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.221441] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.221598] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.221753] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.221907] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.222061] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.222215] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.222370] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.222524] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.222638] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks= none
[ 0.222643] vgaarb: loaded
[ 0.222695] PCI: Using ACPI for IRQ routing
[ 0.222881] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.222885] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.228008] Switching to clocksource tsc
[ 0.228926] pnp: PnP ACPI init
[ 0.228933] ACPI: bus type pnp registered
[ 0.291056] pnp: PnP ACPI: found 10 devices
[ 0.291058] ACPI: ACPI bus type pnp unregistered
[ 0.291066] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.291068] system 00:00: iomem range 0xc0000-0xc3fff has been reserved
[ 0.291070] system 00:00: iomem range 0xc4000-0xc7fff has been reserved
[ 0.291072] system 00:00: iomem range 0xc8000-0xcbfff has been reserved
[ 0.291074] system 00:00: iomem range 0xcc000-0xcffff has been reserved
[ 0.291076] system 00:00: iomem range 0xd0000-0xd3fff has been reserved
[ 0.291079] system 00:00: iomem range 0xdc000-0xdffff could not be reserved
[ 0.291081] system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
[ 0.291083] system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
[ 0.291085] system 00:00: iomem range 0xe8000-0xebfff could not be reserved
[ 0.291088] system 00:00: iomem range 0xec000-0xeffff could not be reserved
[ 0.291090] system 00:00: iomem range 0xf0000-0xfffff could not be reserved
[ 0.291092] system 00:00: iomem range 0x100000-0xbbffffff could not be reserved
[ 0.291095] system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved
[ 0.291097] system 00:00: iomem range 0xfed4c000-0xffffffff could not be reserved
[ 0.291103] system 00:02: ioport range 0x1000-0x107f has been reserved
[ 0.291105] system 00:02: ioport range 0x1180-0x11ff has been reserved
[ 0.291107] system 00:02: ioport range 0x800-0x80f has been reserved
[ 0.291109] system 00:02: ioport range 0x15e0-0x15ef has been reserved
[ 0.291111] system 00:02: ioport range 0x1600-0x167f has been reserved
[ 0.291113] system 00:02: ioport range 0x1680-0x169f has been reserved
[ 0.291116] system 00:02: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.291118] system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.291121] system 00:02: iomem range 0xfed10000-0xfed13fff has been reserved
[ 0.291123] system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.291125] system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.291128] system 00:02: iomem range 0xfed45000-0xfed4bfff has been reserved
[ 0.295826] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.295840] pci 0000:00:01.0: IO window: 0x2000-0x2fff
[ 0.295843] pci 0000:00:01.0: MEM window: 0xcff00000-0xcfffffff
[ 0.295846] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.295849] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.295852] pci 0000:00:1c.0: IO window: 0x9000-0x9fff
[ 0.295857] pci 0000:00:1c.0: MEM window: 0xbc000000-0xbc1fffff
[ 0.295862] pci 0000:00:1c.0: PREFETCH window: 0x000000bc200000-0x000000bc3fffff
[ 0.295868] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 0.295871] pci 0000:00:1c.1: IO window: 0xa000-0xafff
[ 0.295876] pci 0000:00:1c.1: MEM window: 0xf4200000-0xf42fffff
[ 0.295881] pci 0000:00:1c.1: PREFETCH window: 0x000000bc400000-0x000000bc5fffff
[ 0.295887] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05
[ 0.295890] pci 0000:00:1c.3: IO window: 0x3000-0x3fff
[ 0.295895] pci 0000:00:1c.3: MEM window: 0xf8000000-0xf9ffffff
[ 0.295899] pci 0000:00:1c.3: PREFETCH window: 0x000000f4000000-0x000000f40fffff
[ 0.295906] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0d
[ 0.295909] pci 0000:00:1c.4: IO window: 0x4000-0x4fff
[ 0.295914] pci 0000:00:1c.4: MEM window: 0xfa000000-0xfbffffff
[ 0.295918] pci 0000:00:1c.4: PREFETCH window: 0x000000f4100000-0x000000f41fffff
[ 0.295927] pci 0000:15:00.0: CardBus bridge, secondary bus 0000:16
[ 0.295928] pci 0000:15:00.0: IO window: 0x005000-0x0050ff
[ 0.295933] pci 0000:15:00.0: IO window: 0x005400-0x0054ff
[ 0.295938] pci 0000:15:00.0: PREFETCH window: 0xf0000000-0xf3ffffff
[ 0.295943] pci 0000:15:00.0: MEM window: 0xc0000000-0xc3ffffff
[ 0.295948] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:15
[ 0.295951] pci 0000:00:1e.0: IO window: 0x5000-0x8fff
[ 0.295956] pci 0000:00:1e.0: MEM window: 0xf4300000-0xf7ffffff
[ 0.295960] pci 0000:00:1e.0: PREFETCH window: 0x000000f0000000-0x000000f3ffffff
[ 0.295971] alloc irq_desc for 16 on node -1
[ 0.295973] alloc kstat_irqs on node -1
[ 0.295977] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.295980] pci 0000:00:01.0: setting latency timer to 64
[ 0.295987] alloc irq_desc for 20 on node -1
[ 0.295989] alloc kstat_irqs on node -1
[ 0.295991] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.295995] pci 0000:00:1c.0: setting latency timer to 64
[ 0.296004] alloc irq_desc for 21 on node -1
[ 0.296005] alloc kstat_irqs on node -1
[ 0.296009] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.296014] pci 0000:00:1c.1: setting latency timer to 64
[ 0.296023] alloc irq_desc for 23 on node -1
[ 0.296024] alloc kstat_irqs on node -1
[ 0.296027] pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 0.296031] pci 0000:00:1c.3: setting latency timer to 64
[ 0.296040] pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.296044] pci 0000:00:1c.4: setting latency timer to 64
[ 0.296050] pci 0000:00:1e.0: setting latency timer to 64
[ 0.296061] pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.296067] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.296069] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.296071] pci_bus 0000:01: resource 0 io: [0x2000-0x2fff]
[ 0.296073] pci_bus 0000:01: resource 1 mem: [0xcff00000-0xcfffffff]
[ 0.296074] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.296076] pci_bus 0000:02: resource 0 io: [0x9000-0x9fff]
[ 0.296078] pci_bus 0000:02: resource 1 mem: [0xbc000000-0xbc1fffff]
[ 0.296080] pci_bus 0000:02: resource 2 pref mem [0xbc200000-0xbc3fffff]
[ 0.296081] pci_bus 0000:03: resource 0 io: [0xa000-0xafff]
[ 0.296083] pci_bus 0000:03: resource 1 mem: [0xf4200000-0xf42fffff]
[ 0.296085] pci_bus 0000:03: resource 2 pref mem [0xbc400000-0xbc5fffff]
[ 0.296087] pci_bus 0000:05: resource 0 io: [0x3000-0x3fff]
[ 0.296088] pci_bus 0000:05: resource 1 mem: [0xf8000000-0xf9ffffff]
[ 0.296090] pci_bus 0000:05: resource 2 pref mem [0xf4000000-0xf40fffff]
[ 0.296092] pci_bus 0000:0d: resource 0 io: [0x4000-0x4fff]
[ 0.296094] pci_bus 0000:0d: resource 1 mem: [0xfa000000-0xfbffffff]
[ 0.296095] pci_bus 0000:0d: resource 2 pref mem [0xf4100000-0xf41fffff]
[ 0.296097] pci_bus 0000:15: resource 0 io: [0x5000-0x8fff]
[ 0.296099] pci_bus 0000:15: resource 1 mem: [0xf4300000-0xf7ffffff]
[ 0.296101] pci_bus 0000:15: resource 2 pref mem [0xf0000000-0xf3ffffff]
[ 0.296102] pci_bus 0000:15: resource 3 io: [0x00-0xffff]
[ 0.296104] pci_bus 0000:15: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.296106] pci_bus 0000:16: resource 0 io: [0x5000-0x50ff]
[ 0.296108] pci_bus 0000:16: resource 1 io: [0x5400-0x54ff]
[ 0.296109] pci_bus 0000:16: resource 2 pref mem [0xf0000000-0xf3ffffff]
[ 0.296111] pci_bus 0000:16: resource 3 mem: [0xc0000000-0xc3ffffff]
[ 0.296133] NET: Registered protocol family 2
[ 0.296256] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.297391] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.301093] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.301583] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.301585] TCP reno registered
[ 0.301701] NET: Registered protocol family 1
[ 0.301868] pci 0000:01:00.0: Boot video device
[ 0.301924] Unpacking initramfs...
[ 0.343747] Freeing initrd memory: 2455k freed
[ 0.344682] Simple Boot Flag at 0x35 set to 0x1
[ 0.344981] audit: initializing netlink socket (disabled)
[ 0.344992] type=2000 audit(1269940024.343:1): initialized
[ 0.345247] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.346368] VFS: Disk quotas dquot_6.5.2
[ 0.346410] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.346476] msgmni has been set to 5905
[ 0.346633] alg: No test for stdrng

Ben Hutchings 04-03-2010 01:54 AM

Bug#575924: linux-image-2.6.32-4-amd64: fuse module oops on boot
 
On Tue, 2010-03-30 at 11:40 -0400, Denis Laxalde wrote:
> Package: linux-2.6
> Version: 2.6.32-10
> Severity: important
>
> Boot fails from time to time. A relevant dmesg is attached.
> Please let me know if you need more info.

I don't think this has anything to do with the fuse module itself since
the 'oops' occurs while loading it. There seems to have been some
earlier memory corruption. Please try adding 'blacklist radeon' to
/etc/modprobe.d/blacklist. If that doesn't make any difference, test
the system's RAM with e.g. memtest86+.

Ben.

--
Ben Hutchings
Once a job is fouled up, anything done to improve it makes it worse.

Denis Laxalde 04-07-2010 03:45 PM

Bug#575924: linux-image-2.6.32-4-amd64: fuse module oops on boot
 
Hi,

On Sat, 03 Apr 2010 02:54:01 +0100, Ben Hutchings wrote:
> On Tue, 2010-03-30 at 11:40 -0400, Denis Laxalde wrote:
> > Package: linux-2.6
> > Version: 2.6.32-10
> > Severity: important
> >
> > Boot fails from time to time. A relevant dmesg is attached.
> > Please let me know if you need more info.
>
> I don't think this has anything to do with the fuse module itself
> since the 'oops' occurs while loading it. There seems to have been
> some earlier memory corruption. Please try adding 'blacklist radeon'
> to /etc/modprobe.d/blacklist. If that doesn't make any difference,
> test the system's RAM with e.g. memtest86+.
>

Actually, this failure happened sporadically and has not occured for a
week now (despite a daily shutdown) so it might be hard to investigate.

I also noticed an constant error related to radeon very early in the
boot. AFAICT, nothing is recorded in any log. Is there any way to find
more info about this ?

Denis



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20100407114554.0889c9f6@schloss">http://lists.debian.org/20100407114554.0889c9f6@schloss

Ben Hutchings 04-07-2010 05:18 PM

Bug#575924: linux-image-2.6.32-4-amd64: fuse module oops on boot
 
On Wed, 2010-04-07 at 11:45 -0400, Denis Laxalde wrote:
> Hi,
>
> On Sat, 03 Apr 2010 02:54:01 +0100, Ben Hutchings wrote:
> > On Tue, 2010-03-30 at 11:40 -0400, Denis Laxalde wrote:
> > > Package: linux-2.6
> > > Version: 2.6.32-10
> > > Severity: important
> > >
> > > Boot fails from time to time. A relevant dmesg is attached.
> > > Please let me know if you need more info.
> >
> > I don't think this has anything to do with the fuse module itself
> > since the 'oops' occurs while loading it. There seems to have been
> > some earlier memory corruption. Please try adding 'blacklist radeon'
> > to /etc/modprobe.d/blacklist. If that doesn't make any difference,
> > test the system's RAM with e.g. memtest86+.
> >
>
> Actually, this failure happened sporadically and has not occured for a
> week now (despite a daily shutdown) so it might be hard to investigate.
>
> I also noticed an constant error related to radeon very early in the
> boot. AFAICT, nothing is recorded in any log. Is there any way to find
> more info about this ?

First you'll have to tell use what the message is. Normally kernel
messages are saved to /var/log/dmesg (boot messages only) and
/var/log/messages (continually).

Ben.

--
Ben Hutchings
Once a job is fouled up, anything done to improve it makes it worse.

Denis Laxalde 04-07-2010 06:38 PM

Bug#575924: linux-image-2.6.32-4-amd64: fuse module oops on boot
 
On Wed, 07 Apr 2010 18:18:16 +0100, Ben Hutchings wrote:
> On Wed, 2010-04-07 at 11:45 -0400, Denis Laxalde wrote:
> > Hi,
> >
> > On Sat, 03 Apr 2010 02:54:01 +0100, Ben Hutchings wrote:
> > > On Tue, 2010-03-30 at 11:40 -0400, Denis Laxalde wrote:
> > > > Package: linux-2.6
> > > > Version: 2.6.32-10
> > > > Severity: important
> > > >
> > > > Boot fails from time to time. A relevant dmesg is attached.
> > > > Please let me know if you need more info.
> > >
> > > I don't think this has anything to do with the fuse module itself
> > > since the 'oops' occurs while loading it. There seems to have
> > > been some earlier memory corruption. Please try adding
> > > 'blacklist radeon' to /etc/modprobe.d/blacklist. If that doesn't
> > > make any difference, test the system's RAM with e.g. memtest86+.
> > >
> >
> > Actually, this failure happened sporadically and has not occured
> > for a week now (despite a daily shutdown) so it might be hard to
> > investigate.

Another failure just occured (dmesg attached).

> > I also noticed an constant error related to radeon very early in the
> > boot. AFAICT, nothing is recorded in any log. Is there any way to
> > find more info about this ?
>
> First you'll have to tell use what the message is. Normally kernel
> messages are saved to /var/log/dmesg (boot messages only) and
> /var/log/messages (continually).
>

This error was about a missing firmware (5.484487 in the previous
dmesg). Installing firware-linux-nonfree solved this issue.

If boot failures occur again, I will give your previous advices a try
and follow up.

Thanks,

Denis

Ben Hutchings 04-10-2010 11:28 PM

Bug#575924: linux-image-2.6.32-4-amd64: fuse module oops on boot
 
On Wed, 2010-04-07 at 14:38 -0400, Denis Laxalde wrote:
> On Wed, 07 Apr 2010 18:18:16 +0100, Ben Hutchings wrote:
> > On Wed, 2010-04-07 at 11:45 -0400, Denis Laxalde wrote:
[...]
> > > I also noticed an constant error related to radeon very early in the
> > > boot. AFAICT, nothing is recorded in any log. Is there any way to
> > > find more info about this ?
> >
> > First you'll have to tell use what the message is. Normally kernel
> > messages are saved to /var/log/dmesg (boot messages only) and
> > /var/log/messages (continually).
> >
>
> This error was about a missing firmware (5.484487 in the previous
> dmesg). Installing firware-linux-nonfree solved this issue.
>
> If boot failures occur again, I will give your previous advices a try
> and follow up.

That firmware is only used for 3D acceleration, and everything else will
work without it. The more serious error messages suggest memory
corruption. Have you tested the RAM with memtest86+ yet?

Ben.

--
Ben Hutchings
Once a job is fouled up, anything done to improve it makes it worse.

Denis Laxalde 04-11-2010 03:05 AM

Bug#575924: linux-image-2.6.32-4-amd64: fuse module oops on boot
 
Hi,

On Sun, 11 Apr 2010 00:28:24 +0100, Ben Hutchings wrote:
> The more serious error messages suggest memory corruption. Have you
> tested the RAM with memtest86+ yet?

Yes, I've just run a pretty long test with memtest86+ and there was no
error reported.

Denis




--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20100410230536.485efd5c@schloss">http://lists.debian.org/20100410230536.485efd5c@schloss

Ben Hutchings 04-11-2010 03:05 PM

Bug#575924: linux-image-2.6.32-4-amd64: fuse module oops on boot
 
On Sat, 2010-04-10 at 23:05 -0400, Denis Laxalde wrote:
> Hi,
>
> On Sun, 11 Apr 2010 00:28:24 +0100, Ben Hutchings wrote:
> > The more serious error messages suggest memory corruption. Have you
> > tested the RAM with memtest86+ yet?
>
> Yes, I've just run a pretty long test with memtest86+ and there was no
> error reported.

OK, so we can be fairly sure this is a kernel bug. Please report this
at <https://bugzilla.kernel.org>. It is hard to know where the bug may
be, but try submitting it under product 'Memory Management', component
'Slab Allocator'. Let us know the bug number so we can track it.

Ben.

--
Ben Hutchings
Once a job is fouled up, anything done to improve it makes it worse.

Denis Laxalde 04-11-2010 10:23 PM

Bug#575924: linux-image-2.6.32-4-amd64: fuse module oops on boot
 
forwarded 575924 https://bugzilla.kernel.org/show_bug.cgi?id=14347
thanks

On Sun, 11 Apr 2010 16:05:57 +0100, Ben Hutchings wrote:
> On Sat, 2010-04-10 at 23:05 -0400, Denis Laxalde wrote:
> > Hi,
> >
> > On Sun, 11 Apr 2010 00:28:24 +0100, Ben Hutchings wrote:
> > > The more serious error messages suggest memory corruption. Have
> > > you tested the RAM with memtest86+ yet?
> >
> > Yes, I've just run a pretty long test with memtest86+ and there was
> > no error reported.
>
> OK, so we can be fairly sure this is a kernel bug. Please report this
> at <https://bugzilla.kernel.org>. It is hard to know where the bug
> may be, but try submitting it under product 'Memory Management',
> component 'Slab Allocator'. Let us know the bug number so we can
> track it.

The above bug report looks similar, so I just added comments and dmesgs
there.
Maybe the bug should be retitled ?

Cheers,

Denis



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20100411182357.6be8375a@schloss">http://lists.debian.org/20100411182357.6be8375a@schloss

Denis Laxalde 06-18-2010 01:44 PM

Bug#575924: linux-image-2.6.32-4-amd64: fuse module oops on boot
 
Hi,

Le lundi 12 avril 2010 à 01:18 +0100, Ben Hutchings a écrit :
> On Sun, 2010-04-11 at 18:23 -0400, Denis Laxalde wrote:
> > forwarded 575924 https://bugzilla.kernel.org/show_bug.cgi?id=14347
> > thanks
> >
> > On Sun, 11 Apr 2010 16:05:57 +0100, Ben Hutchings wrote:
> > > On Sat, 2010-04-10 at 23:05 -0400, Denis Laxalde wrote:
> > > > Hi,
> > > >
> > > > On Sun, 11 Apr 2010 00:28:24 +0100, Ben Hutchings wrote:
> > > > > The more serious error messages suggest memory corruption. Have
> > > > > you tested the RAM with memtest86+ yet?
> > > >
> > > > Yes, I've just run a pretty long test with memtest86+ and there was
> > > > no error reported.
> > >
> > > OK, so we can be fairly sure this is a kernel bug. Please report this
> > > at <https://bugzilla.kernel.org>. It is hard to know where the bug
> > > may be, but try submitting it under product 'Memory Management',
> > > component 'Slab Allocator'. Let us know the bug number so we can
> > > track it.
> >
> > The above bug report looks similar, so I just added comments and dmesgs
> > there.
> > Maybe the bug should be retitled ?
>
> I'm not convinced that these are the same bug. Let's see what the
> response is.

There was no response so far and, since boot failures still happen from
time to time (once a week or so), I may open a new bug upstream...
In fact, there are even worse than before since I cannot recover using
SysRq keys combination anymore (I just power-off the computer now).
Hence, I cannot save a relevant dmesg anymore.
Is there any way to recover messages in such situations?

Cheers,

Denis



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20100618134435.GA2402@schloss">http://lists.debian.org/20100618134435.GA2402@schloss


All times are GMT. The time now is 08:17 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.