FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 03-12-2010, 08:09 PM
 
Default Bug#573607: linux-image-2.6-686: No eth0 on EeePC 1005ha with acpi_osi=Linux

Subject: linux-image-2.6-686: No eth0 on EeePC 1005ha with acpi_osi=Linux
Package: linux-image-2.6-686
Severity: important

If I add acpi_osi="Linux" to the kernel command line as mentioned in the wiki (http://wiki.debian.org/DebianEeePC/Model/1005HA), the module eeepc-laptop gets loaded, but I can not use the Ethernet card anymore. There is no eth0. Wireless seems to work fine and I can use the kill switch.

Any ideas? Thanks.


== dmesg ==
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-trunk-686 (Debian 2.6.32-5) (ben@decadent.org.uk) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Sun Jan 10 06:32:16 UTC 2010
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e2000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f7a0000 (usable)
[ 0.000000] BIOS-e820: 000000003f7a0000 - 000000003f7ae000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003f7ae000 - 000000003f7f0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f7f0000 - 000000003f800000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x3f7a0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 0C0000000 write-back
[ 0.000000] 1 base 03F800000 mask 0FF800000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037000000 page 2M
[ 0.000000] 0037000000 - 00373fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
[ 0.000000] RAMDISK: 2f10c000 - 2f9f7f2f
[ 0.000000] ACPI: RSDP 000fb9e0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 3f7a0000 00040 (v01 _ASUS_ Notebook 01001005 MSFT 00000097)
[ 0.000000] ACPI: FACP 3f7a0200 00084 (v02 A_M_I_ OEMFACP 01001005 MSFT 00000097)
[ 0.000000] ACPI: DSDT 3f7a0430 080A2 (v01 A1311 A1311000 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 3f7ae000 00040
[ 0.000000] ACPI: APIC 3f7a0390 0005C (v01 A_M_I_ OEMAPIC 01001005 MSFT 00000097)
[ 0.000000] ACPI: MCFG 3f7a03f0 0003C (v01 A_M_I_ OEMMCFG 01001005 MSFT 00000097)
[ 0.000000] ACPI: OEMB 3f7ae040 00061 (v01 A_M_I_ AMI_OEM 01001005 MSFT 00000097)
[ 0.000000] ACPI: HPET 3f7a84e0 00038 (v01 A_M_I_ OEMHPET 01001005 MSFT 00000097)
[ 0.000000] ACPI: SSDT 3f7aeb80 004F0 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: SLIC 3f7a8520 00176 (v01 _ASUS_ Notebook 01001005 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 131MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 0 - 373fe000
[ 0.000000] node 0 low ram: 00000000 - 373fe000
[ 0.000000] node 0 bootmap 00012000 - 00018e80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 00014a1334] TEXT DATA BSS ==> [0001000000 - 00014a1334]
[ 0.000000] #4 [002f10c000 - 002f9f7f2f] RAMDISK ==> [002f10c000 - 002f9f7f2f]
[ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #6 [00014a2000 - 00014a81e0] BRK ==> [00014a2000 - 00014a81e0]
[ 0.000000] #7 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x0003f7a0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003f7a0
[ 0.000000] On node 0 totalpages: 259887
[ 0.000000] free_area_init_node: node 0, pgdat c138edc0, node_mem_map c14aa200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 264 pages used for memmap
[ 0.000000] HighMem zone: 33434 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e2000
[ 0.000000] PM: Registered nosave memory: 00000000000e2000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 3f800000 (gap: 3f800000:bf600000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2000000 s34072 r0 d23272 u2097152
[ 0.000000] pcpu-alloc: s34072 r0 d23272 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257855
[ 0.000000] Kernel command line: BOOT_IMAGE=//vmlinuz-2.6.32-trunk-686 root=/dev/mapper/neutrino-root ro acpi_osi=Linux quiet
[ 0.000000] ACPI: Added _OSI(Linux)
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000373fe:0003f7a0)
[ 0.000000] Memory: 1015968k/1040000k available (2414k kernel code, 22992k reserved, 1266k data, 368k init, 134792k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.000000] .init : 0xc1399000 - 0xc13f5000 ( 368 kB)
[ 0.000000] .data : 0xc125bb11 - 0xc1398560 (1266 kB)
[ 0.000000] .text : 0xc1000000 - 0xc125bb11 (2414 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1599.817 MHz processor.
[ 0.004009] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.63 BogoMIPS (lpj=6399268)
[ 0.004045] Security Framework initialized
[ 0.004053] SELinux: Disabled at boot.
[ 0.004067] Mount-cache hash table entries: 512
[ 0.004293] Initializing cgroup subsys ns
[ 0.004302] Initializing cgroup subsys cpuacct
[ 0.004311] Initializing cgroup subsys devices
[ 0.004316] Initializing cgroup subsys freezer
[ 0.004321] Initializing cgroup subsys net_cls
[ 0.004356] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 0.004362] CPU: L2 cache: 512K
[ 0.004367] CPU: Physical Processor ID: 0
[ 0.004371] CPU: Processor Core ID: 0
[ 0.004378] mce: CPU supports 5 MCE banks
[ 0.004392] CPU0: Thermal monitoring enabled (TM2)
[ 0.004401] using mwait in idle threads.
[ 0.004411] Performance Events: Atom events, Intel PMU driver.
[ 0.004424] ... version: 3
[ 0.004428] ... bit width: 40
[ 0.004431] ... generic registers: 2
[ 0.004436] ... value mask: 000000ffffffffff
[ 0.004440] ... max period: 000000007fffffff
[ 0.004444] ... fixed-purpose events: 3
[ 0.004448] ... event mask: 0000000700000003
[ 0.004456] Checking 'hlt' instruction... OK.
[ 0.021586] ACPI: Core revision 20090903
[ 0.040561] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.080997] CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
[ 0.084001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] Calibrating delay using timer specific routine.. 3199.61 BogoMIPS (lpj=6399234)
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 0.008000] CPU: L2 cache: 512K
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 0
[ 0.008000] CPU1: Thermal monitoring enabled (TM2)
[ 0.168121] CPU1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
[ 0.168149] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.172079] Brought up 2 CPUs
[ 0.172086] Total of 2 processors activated (6399.25 BogoMIPS).
[ 0.172319] CPU0 attaching sched-domain:
[ 0.172328] domain 0: span 0-1 level SIBLING
[ 0.172334] groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[ 0.172346] domain 1: span 0-1 level MC
[ 0.172351] groups: 0-1 (cpu_power = 1178)
[ 0.172362] CPU1 attaching sched-domain:
[ 0.172367] domain 0: span 0-1 level SIBLING
[ 0.172372] groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[ 0.172383] domain 1: span 0-1 level MC
[ 0.172388] groups: 0-1 (cpu_power = 1178)
[ 0.172719] devtmpfs: initialized
[ 0.173515] regulator: core version 0.5
[ 0.173634] NET: Registered protocol family 16
[ 0.173821] ACPI: bus type pci registered
[ 0.173953] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63
[ 0.173960] PCI: Not using MMCONFIG.
[ 0.174275] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 0.174279] PCI: Using configuration type 1 for base access
[ 0.175112] bio: create slab <bio-0> at 0
[ 0.176912] ACPI: EC: Look up EC in DSDT
[ 0.179116] ACPI: BIOS _OSI(Linux) query honored via cmdline
[ 0.179306] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.193850] ACPI: Interpreter enabled
[ 0.193868] ACPI: (supports S0 S3 S4 S5)
[ 0.193918] ACPI: Using IOAPIC for interrupt routing
[ 0.194016] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63
[ 0.197928] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.197933] PCI: Using MMCONFIG for extended config space
[ 0.210312] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.210747] ACPI: No dock devices found.
[ 0.210994] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.211137] pci 0000:00:02.0: reg 10 32bit mmio: [0xf7e00000-0xf7e7ffff]
[ 0.211147] pci 0000:00:02.0: reg 14 io port: [0xdc00-0xdc07]
[ 0.211156] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.211165] pci 0000:00:02.0: reg 1c 32bit mmio: [0xf7dc0000-0xf7dfffff]
[ 0.211217] pci 0000:00:02.1: reg 10 32bit mmio: [0xf7e80000-0xf7efffff]
[ 0.211355] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf7db8000-0xf7dbbfff]
[ 0.211430] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.211439] pci 0000:00:1b.0: PME# disabled
[ 0.211553] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.211561] pci 0000:00:1c.0: PME# disabled
[ 0.211678] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.211686] pci 0000:00:1c.1: PME# disabled
[ 0.211804] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.211812] pci 0000:00:1c.3: PME# disabled
[ 0.211894] pci 0000:00:1d.0: reg 20 io port: [0xd400-0xd41f]
[ 0.211976] pci 0000:00:1d.1: reg 20 io port: [0xd480-0xd49f]
[ 0.212071] pci 0000:00:1d.2: reg 20 io port: [0xd800-0xd81f]
[ 0.212152] pci 0000:00:1d.3: reg 20 io port: [0xd880-0xd89f]
[ 0.212242] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf7db7c00-0xf7db7fff]
[ 0.212319] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.212327] pci 0000:00:1d.7: PME# disabled
[ 0.212527] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.212536] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.212544] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0380 (mask 0003)
[ 0.212553] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 0007)
[ 0.212561] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0068 (mask 0007)
[ 0.212650] pci 0000:00:1f.2: reg 10 io port: [0xd080-0xd087]
[ 0.212662] pci 0000:00:1f.2: reg 14 io port: [0xd000-0xd003]
[ 0.212675] pci 0000:00:1f.2: reg 18 io port: [0xcc00-0xcc07]
[ 0.212687] pci 0000:00:1f.2: reg 1c io port: [0xc880-0xc883]
[ 0.212699] pci 0000:00:1f.2: reg 20 io port: [0xc800-0xc80f]
[ 0.212712] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf7db7800-0xf7db7bff]
[ 0.212758] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.212766] pci 0000:00:1f.2: PME# disabled
[ 0.212944] pci 0000:02:00.0: reg 10 64bit mmio: [0xfbff0000-0xfbffffff]
[ 0.213040] pci 0000:02:00.0: supports D1
[ 0.213045] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.213054] pci 0000:02:00.0: PME# disabled
[ 0.213150] pci 0000:00:1c.1: bridge 32bit mmio: [0xf8000000-0xfbffffff]
[ 0.213163] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xf0000000-0xf6ffffff]
[ 0.213248] pci 0000:01:00.0: reg 10 64bit mmio: [0xf7fc0000-0xf7ffffff]
[ 0.213264] pci 0000:01:00.0: reg 18 io port: [0xec00-0xec7f]
[ 0.213356] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.213365] pci 0000:01:00.0: PME# disabled
[ 0.213453] pci 0000:00:1c.3: bridge io port: [0xe000-0xefff]
[ 0.213462] pci 0000:00:1c.3: bridge 32bit mmio: [0xf7f00000-0xf7ffffff]
[ 0.213538] pci 0000:00:1e.0: transparent bridge
[ 0.213584] pci_bus 0000:00: on NUMA node 0
[ 0.213598] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.213926] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 0.214022] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[ 0.236782] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.237024] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.237262] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.237500] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.237739] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.237979] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.238220] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.238459] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.238680] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks= none
[ 0.238700] vgaarb: loaded
[ 0.238849] PCI: Using ACPI for IRQ routing
[ 0.239220] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.239233] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.244024] Switching to clocksource tsc
[ 0.246246] pnp: PnP ACPI init
[ 0.246288] ACPI: bus type pnp registered
[ 0.250343] pnp: PnP ACPI: found 13 devices
[ 0.250350] ACPI: ACPI bus type pnp unregistered
[ 0.250359] PnPBIOS: Disabled by ACPI PNP
[ 0.250384] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
[ 0.250402] system 00:08: ioport range 0x25c-0x25f has been reserved
[ 0.250410] system 00:08: ioport range 0x380-0x383 has been reserved
[ 0.250417] system 00:08: ioport range 0x400-0x41f has been reserved
[ 0.250424] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.250431] system 00:08: ioport range 0x800-0x87f has been reserved
[ 0.250438] system 00:08: ioport range 0x480-0x4bf has been reserved
[ 0.250446] system 00:08: iomem range 0x8c000000-0x8c01ffff has been reserved
[ 0.250454] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.250461] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.250469] system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved
[ 0.250476] system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved
[ 0.250484] system 00:08: iomem range 0xfff00000-0xffffffff could not be reserved
[ 0.250498] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.250505] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.250519] system 00:0b: iomem range 0xe0000000-0xe3ffffff has been reserved
[ 0.250532] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 0.250539] system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
[ 0.250546] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[ 0.250554] system 00:0c: iomem range 0x100000-0x3f7fffff could not be reserved
[ 0.285644] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04
[ 0.285653] pci 0000:00:1c.0: IO window: 0x1000-0x1fff
[ 0.285664] pci 0000:00:1c.0: MEM window: 0x40000000-0x401fffff
[ 0.285674] pci 0000:00:1c.0: PREFETCH window: 0x00000040200000-0x000000403fffff
[ 0.285687] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
[ 0.285694] pci 0000:00:1c.1: IO window: 0x2000-0x2fff
[ 0.285704] pci 0000:00:1c.1: MEM window: 0xf8000000-0xfbffffff
[ 0.285713] pci 0000:00:1c.1: PREFETCH window: 0x000000f0000000-0x000000f6ffffff
[ 0.285726] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:01
[ 0.285733] pci 0000:00:1c.3: IO window: 0xe000-0xefff
[ 0.285743] pci 0000:00:1c.3: MEM window: 0xf7f00000-0xf7ffffff
[ 0.285752] pci 0000:00:1c.3: PREFETCH window: 0x00000040400000-0x000000405fffff
[ 0.285765] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[ 0.285769] pci 0000:00:1e.0: IO window: disabled
[ 0.285778] pci 0000:00:1e.0: MEM window: disabled
[ 0.285786] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.285806] pci 0000:00:1c.0: enabling device (0104 -> 0107)
[ 0.285824] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.285834] pci 0000:00:1c.0: setting latency timer to 64
[ 0.285849] pci 0000:00:1c.1: enabling device (0106 -> 0107)
[ 0.285860] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.285869] pci 0000:00:1c.1: setting latency timer to 64
[ 0.285888] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.285896] pci 0000:00:1c.3: setting latency timer to 64
[ 0.285910] pci 0000:00:1e.0: setting latency timer to 64
[ 0.285919] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.285925] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.285932] pci_bus 0000:04: resource 0 io: [0x1000-0x1fff]
[ 0.285938] pci_bus 0000:04: resource 1 mem: [0x40000000-0x401fffff]
[ 0.285945] pci_bus 0000:04: resource 2 pref mem [0x40200000-0x403fffff]
[ 0.285951] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
[ 0.285957] pci_bus 0000:02: resource 1 mem: [0xf8000000-0xfbffffff]
[ 0.285964] pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf6ffffff]
[ 0.285970] pci_bus 0000:01: resource 0 io: [0xe000-0xefff]
[ 0.285976] pci_bus 0000:01: resource 1 mem: [0xf7f00000-0xf7ffffff]
[ 0.285983] pci_bus 0000:01: resource 2 pref mem [0x40400000-0x405fffff]
[ 0.285989] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
[ 0.285996] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffff]
[ 0.286061] NET: Registered protocol family 2
[ 0.286247] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.286872] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.287897] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.288392] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.288399] TCP reno registered
[ 0.288621] NET: Registered protocol family 1
[ 0.288671] pci 0000:00:02.0: Boot video device
[ 0.288907] Unpacking initramfs...
[ 0.730949] Freeing initrd memory: 9135k freed
[ 0.740957] audit: initializing netlink socket (disabled)
[ 0.740982] type=2000 audit(1268424696.739:1): initialized
[ 0.741304] highmem bounce pool size: 64 pages
[ 0.741314] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.744508] VFS: Disk quotas dquot_6.5.2
[ 0.744637] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.744789] msgmni has been set to 1740
[ 0.745192] alg: No test for stdrng (krng)
[ 0.745314] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.745322] io scheduler noop registered
[ 0.745326] io scheduler anticipatory registered
[ 0.745331] io scheduler deadline registered
[ 0.745414] io scheduler cfq registered (default)
[ 0.745638] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.745656] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.745893] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.745909] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.746136] pcieport 0000:00:1c.3: irq 26 for MSI/MSI-X
[ 0.746152] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.746474] isapnp: Scanning for PnP cards...
[ 1.100220] isapnp: No Plug & Play device found
[ 1.103494] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.104292] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.123621] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.123637] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.123869] mice: PS/2 mouse device common for all mice
[ 1.123912] Driver 'rtc_cmos' needs updating - please use bus_type methods
[ 1.124920] rtc_cmos 00:03: RTC can wake from S4
[ 1.124993] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.125038] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 1.125065] cpuidle: using governor ladder
[ 1.125070] cpuidle: using governor menu
[ 1.125079] No iBFT detected.
[ 1.125878] TCP cubic registered
[ 1.126196] NET: Registered protocol family 10
[ 1.127166] lo: Disabled Privacy Extensions
[ 1.127863] Mobile IPv6
[ 1.127871] NET: Registered protocol family 17
[ 1.127903] Using IPI No-Shortcut mode
[ 1.128106] registered taskstats version 1
[ 1.128701] rtc_cmos 00:03: setting system clock to 2010-03-12 20:11:37 UTC (1268424697)
[ 1.128811] Freeing unused kernel memory: 368k freed
[ 1.129170] Write protecting the kernel text: 2416k
[ 1.129212] Write protecting the kernel read-only data: 872k
[ 1.142016] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.372907] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.372925] ACPI: Thermal Zone [TZ00] (54 C)
[ 1.481230] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 1.486166] ACPI: Lid Switch [LID]
[ 1.486402] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 1.486418] ACPI: Sleep Button [SLPB]
[ 1.486610] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 1.486623] ACPI: Power Button [PWRB]
[ 1.486816] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 1.486828] ACPI: Power Button [PWRF]
[ 1.525395] Linux agpgart interface v0.103
[ 1.666400] usbcore: registered new interface driver usbfs
[ 1.666702] usbcore: registered new interface driver hub
[ 1.667036] usbcore: registered new device driver usb
[ 1.679839] acpi device:22: registered as cooling_device0
[ 1.680647] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 1.680670] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 1.736895] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.736972] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.740706] SCSI subsystem initialized
[ 1.744060] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.744071] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.744141] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.744191] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 1.744213] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.748124] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.764259] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7db7c00
[ 1.784033] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.784119] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.784128] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.784137] usb usb1: Product: EHCI Host Controller
[ 1.784144] usb usb1: Manufacturer: Linux 2.6.32-trunk-686 ehci_hcd
[ 1.784152] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.784572] usb usb1: configuration #1 chosen from 1 choice
[ 1.784779] hub 1-0:1.0: USB hub found
[ 1.784805] hub 1-0:1.0: 8 ports detected
[ 1.820079] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[ 1.820433] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 1.823813] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.834722] libata version 3.00 loaded.
[ 1.895064] [drm] Initialized drm 1.1.0 20060810
[ 1.896083] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.896208] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.896229] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.896239] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.896276] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.896329] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400
[ 1.896441] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.896451] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.896459] usb usb2: Product: UHCI Host Controller
[ 1.896466] usb usb2: Manufacturer: Linux 2.6.32-trunk-686 uhci_hcd
[ 1.896473] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.897683] usb usb2: configuration #1 chosen from 1 choice
[ 1.897956] hub 2-0:1.0: USB hub found
[ 1.897983] hub 2-0:1.0: 2 ports detected
[ 1.898144] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.898164] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.898173] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.898199] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.898265] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d480
[ 1.898373] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.898383] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.898391] usb usb3: Product: UHCI Host Controller
[ 1.898398] usb usb3: Manufacturer: Linux 2.6.32-trunk-686 uhci_hcd
[ 1.898406] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.899386] usb usb3: configuration #1 chosen from 1 choice
[ 1.899654] hub 3-0:1.0: USB hub found
[ 1.899685] hub 3-0:1.0: 2 ports detected
[ 1.899858] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.899877] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.899887] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.899914] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.899978] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800
[ 1.900085] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.900094] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.900102] usb usb4: Product: UHCI Host Controller
[ 1.900110] usb usb4: Manufacturer: Linux 2.6.32-trunk-686 uhci_hcd
[ 1.900117] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.900529] usb usb4: configuration #1 chosen from 1 choice
[ 1.900747] hub 4-0:1.0: USB hub found
[ 1.900773] hub 4-0:1.0: 2 ports detected
[ 1.900931] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 1.900951] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.900961] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.900987] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.901084] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d880
[ 1.901192] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.901201] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.901209] usb usb5: Product: UHCI Host Controller
[ 1.901216] usb usb5: Manufacturer: Linux 2.6.32-trunk-686 uhci_hcd
[ 1.901224] usb usb5: SerialNumber: 0000:00:1d.3
[ 1.901583] usb usb5: configuration #1 chosen from 1 choice
[ 1.901783] hub 5-0:1.0: USB hub found
[ 1.901809] hub 5-0:1.0: 2 ports detected
[ 1.925046] ahci 0000:00:1f.2: version 3.0
[ 1.925083] ahci 0000:00:1f.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 1.925173] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
[ 1.925317] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
[ 1.925330] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 1.925343] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.938591] scsi0 : ahci
[ 1.943105] scsi1 : ahci
[ 1.947528] scsi2 : ahci
[ 1.947731] scsi3 : ahci
[ 1.948418] ata1: SATA max UDMA/133 abar m1024@0xf7db7800 port 0xf7db7900 irq 27
[ 1.948428] ata2: DUMMY
[ 1.948433] ata3: DUMMY
[ 1.948438] ata4: DUMMY
[ 1.969993] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.970003] i915 0000:00:02.0: setting latency timer to 64
[ 1.978153] [drm] set up 7M of stolen space
[ 2.100750] integrated sync not supported
[ 2.109032] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 2.265042] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.266398] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.277190] usb 1-2: New USB device found, idVendor=13d3, idProduct=5108
[ 2.277198] usb 1-2: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 2.277205] usb 1-2: Product: USB 2.0 Camera
[ 2.277211] usb 1-2: Manufacturer: Sonix Technology Co., Ltd.
[ 2.277216] usb 1-2: SerialNumber: SN0001
[ 2.277424] usb 1-2: configuration #1 chosen from 1 choice
[ 2.313975] ata1.00: ATA-8: ST9250315AS, 0002SDM1, max UDMA/133
[ 2.313985] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.316241] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.316618] ata1.00: configured for UDMA/133
[ 2.333548] scsi 0:0:0:0: Direct-Access ATA ST9250315AS 0002 PQ: 0 ANSI: 5
[ 2.353068] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 2.353215] sd 0:0:0:0: [sda] Write Protect is off
[ 2.353224] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.353300] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.353691] sda: sda1 sda2 < sda5 >
[ 2.367187] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.389041] usb 1-3: new high speed USB device using ehci_hcd and address 3
[ 2.522437] usb 1-3: New USB device found, idVendor=058f, idProduct=6335
[ 2.522447] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.522455] usb 1-3: Product: Mass Storage Device
[ 2.522461] usb 1-3: Manufacturer: Generic
[ 2.522467] usb 1-3: SerialNumber: 058F63356336
[ 2.522678] usb 1-3: configuration #1 chosen from 1 choice
[ 2.533216] integrated sync not supported
[ 2.548987] Initializing USB Mass Storage driver...
[ 2.600923] scsi4 : SCSI emulation for USB Mass Storage devices
[ 2.601146] usbcore: registered new interface driver usb-storage
[ 2.601154] USB Mass Storage support registered.
[ 2.601410] usb-storage: device found at 3
[ 2.601415] usb-storage: waiting for device to settle before scanning
[ 2.620670] [drm] LVDS-8: set mode 1024x600 e
[ 2.853758] Console: switching to colour frame buffer device 128x37
[ 2.861720] fb0: inteldrmfb frame buffer device
[ 2.861723] registered panic notifier
[ 2.861752] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.876035] usb 5-1: new full speed USB device using uhci_hcd and address 2
[ 2.965872] device-mapper: uevent: version 1.0.3
[ 2.966759] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 3.000048] usb 5-1: device descriptor read/64, error -71
[ 3.220023] usb 5-1: device descriptor read/64, error -71
[ 3.436021] usb 5-1: new full speed USB device using uhci_hcd and address 3
[ 3.556018] usb 5-1: device descriptor read/64, error -71
[ 3.780021] usb 5-1: device descriptor read/64, error -71
[ 3.996022] usb 5-1: new full speed USB device using uhci_hcd and address 4
[ 4.404016] usb 5-1: device not accepting address 4, error -71
[ 4.516019] usb 5-1: new full speed USB device using uhci_hcd and address 5
[ 4.924016] usb 5-1: device not accepting address 5, error -71
[ 4.924032] hub 5-0:1.0: unable to enumerate USB device on port 1
[ 7.600196] usb-storage: device scan complete
[ 7.600809] scsi 4:0:0:0: Direct-Access Single Flash Reader 1.00 PQ: 0 ANSI: 0
[ 7.997397] sd 4:0:0:0: [sdb] 31388672 512-byte logical blocks: (16.0 GB/14.9 GiB)
[ 7.998135] sd 4:0:0:0: [sdb] Write Protect is off
[ 7.998143] sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 7.998148] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 8.000633] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 8.000643] sdb: sdb1
[ 8.003305] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 8.003318] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 17.047020] PM: Starting manual resume from disk
[ 17.133092] EXT4-fs (dm-1): mounted filesystem with ordered data mode
[ 18.601700] udev: starting version 151
[ 19.131388] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 19.158623] ACPI: SSDT 3f7ae180 0023C (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 19.160452] ACPI: SSDT 3f7ae450 00724 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 19.161526] ACPI: AC Adapter [AC0] (off-line)
[ 19.163698] Monitor-Mwait will be used to enter C-1 state
[ 19.163777] Monitor-Mwait will be used to enter C-2 state
[ 19.163840] Monitor-Mwait will be used to enter C-3 state
[ 19.163859] Marking TSC unstable due to TSC halts in idle
[ 19.164161] processor LNXCPU:00: registered as cooling_device1
[ 19.165257] ACPI: SSDT 3f7ae0b0 000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
[ 19.166139] ACPI: SSDT 3f7ae3c0 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
[ 19.167038] Switching to clocksource hpet
[ 19.233900] atl1c 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 19.233927] atl1c 0000:01:00.0: setting latency timer to 64
[ 19.239327] processor LNXCPU:01: registered as cooling_device2
[ 19.245661] intel_rng: FWH not detected
[ 19.312679] eeepc_laptop: Eee PC Hotkey Driver
[ 19.313263] eeepc_laptop: Hotkey init flags 0x41
[ 19.313449] eeepc_laptop: TYPE (2000000) not reported by BIOS, enabling anyway
[ 19.323002] eeepc_laptop: PANELPOWER (4000000) not reported by BIOS, enabling anyway
[ 19.343632] atl1c 0000:01:00.0: version 1.0.0.1-NAPI
[ 19.346900] eeepc_laptop: TPD (8000000) not reported by BIOS, enabling anyway
[ 19.346915] eeepc_laptop: Get control methods supported: 0xe101713
[ 19.347692] eeepc_laptop: Backlight controlled by ACPI video driver
[ 19.347893] input: Asus EeePC extra buttons as /devices/platform/eeepc/input/input6
[ 19.397427] ACPI: Battery Slot [BAT0] (battery present)
[ 19.507914] cfg80211: Using static regulatory domain info
[ 19.507922] cfg80211: Regulatory domain: US
[ 19.507928] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 19.507937] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 19.507945] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 19.507954] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 19.507963] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 19.507971] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 19.507980] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 19.508178] cfg80211: Calling CRDA for country: US
[ 19.578702] Linux video capture interface: v2.00
[ 19.624342] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (13d3:5108)
[ 19.633962] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/input/input7
[ 19.634164] usbcore: registered new interface driver uvcvideo
[ 19.634250] USB Video Class driver (v0.1.0)
[ 19.701137] atl1c 0000:01:00.0: PCI INT A disabled
[ 19.783701] ath9k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 19.783724] ath9k 0000:02:00.0: setting latency timer to 64
[ 19.834078] ath: EEPROM regdomain: 0x60
[ 19.834086] ath: EEPROM indicates we should expect a direct regpair map
[ 19.834096] ath: Country alpha2 being used: 00
[ 19.834101] ath: Regpair used: 0x60
[ 19.876591] phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 19.878124] Registered led device: ath9k-phy0::radio
[ 19.878223] Registered led device: ath9k-phy0::assoc
[ 19.878319] Registered led device: ath9k-phy0::tx
[ 19.878414] Registered led device: ath9k-phy0::rx
[ 19.878452] phy0: Atheros AR9285 MAC/BB Rev:2 AR5133 RF Rev:e0: mem=0xf8ee0000, irq=17
[ 20.009044] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 20.009155] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 20.130446] hda_codec: ALC269: BIOS auto-probing.
[ 20.131217] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 20.255428] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1a0b1, caps: 0xd04731/0xa40000
[ 20.326778] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
[ 21.016601] loop: module loaded
[ 22.627458] EXT4-fs (dm-5): mounted filesystem with ordered data mode
[ 22.697274] EXT4-fs (dm-4): mounted filesystem with ordered data mode
[ 22.742904] EXT4-fs (dm-3): mounted filesystem with ordered data mode
[ 23.008517] Adding 3002360k swap on /dev/mapper/neutrino-swap_1. Priority:-1 extents:1 across:3002360k
[ 24.998286] fuse init (API version 7.13)
[ 29.078591] Bluetooth: Core ver 2.15
[ 29.078794] NET: Registered protocol family 31
[ 29.078807] Bluetooth: HCI device and connection manager initialized
[ 29.078822] Bluetooth: HCI socket layer initialized
[ 29.111069] Bluetooth: L2CAP ver 2.14
[ 29.111069] Bluetooth: L2CAP socket layer initialized
[ 29.170939] Bluetooth: RFCOMM TTY layer initialized
[ 29.170948] Bluetooth: RFCOMM socket layer initialized
[ 29.170953] Bluetooth: RFCOMM ver 1.11
[ 29.367677] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 29.367683] Bluetooth: BNEP filters: protocol multicast
[ 29.427789] Bridge firewalling registered
[ 29.456960] Bluetooth: SCO (Voice Link) ver 0.6
[ 29.456968] Bluetooth: SCO socket layer initialized
[ 32.947823] integrated sync not supported
[ 33.095389] integrated sync not supported
[ 39.964370] usb 5-1: new full speed USB device using uhci_hcd and address 6
[ 40.084099] usb 5-1: device descriptor read/64, error -71
[ 40.308121] usb 5-1: device descriptor read/64, error -71
[ 40.528071] usb 5-1: new full speed USB device using uhci_hcd and address 7
[ 40.648210] usb 5-1: device descriptor read/64, error -71
[ 40.872200] usb 5-1: device descriptor read/64, error -71
[ 41.088197] usb 5-1: new full speed USB device using uhci_hcd and address 8
[ 41.504168] usb 5-1: device not accepting address 8, error -71
[ 41.616182] usb 5-1: new full speed USB device using uhci_hcd and address 9
[ 42.032149] usb 5-1: device not accepting address 9, error -71
[ 42.032196] hub 5-0:1.0: unable to enumerate USB device on port 1
[ 42.842251] CPU0 attaching NULL sched-domain.
[ 42.842269] CPU1 attaching NULL sched-domain.
[ 42.873263] CPU0 attaching sched-domain:
[ 42.873279] domain 0: span 0-1 level SIBLING
[ 42.873291] groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[ 42.873317] domain 1: span 0-1 level MC
[ 42.873327] groups: 0-1 (cpu_power = 1178)
[ 42.873347] CPU1 attaching sched-domain:
[ 42.873357] domain 0: span 0-1 level SIBLING
[ 42.873367] groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[ 42.873390] domain 1: span 0-1 level MC
[ 42.873400] groups: 0-1 (cpu_power = 1178)
[ 43.698339] integrated sync not supported
[ 43.870307] integrated sync not supported
[ 44.031736] integrated sync not supported
--
GRATIS für alle GMX-Mitglieder: Die maxdome Movie-FLAT!
Jetzt freischalten unter http://portal.gmx.net/de/go/maxdome01



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20100312210917.32030@gmx.net">http://lists.debian.org/20100312210917.32030@gmx.net
 
Old 03-13-2010, 03:01 AM
Ben Hutchings
 
Default Bug#573607: linux-image-2.6-686: No eth0 on EeePC 1005ha with acpi_osi=Linux

On Fri, 2010-03-12 at 22:09 +0100, wiekaltheut@gmx.de wrote:
> Subject: linux-image-2.6-686: No eth0 on EeePC 1005ha with acpi_osi=Linux
> Package: linux-image-2.6-686
> Severity: important
>
> If I add acpi_osi="Linux" to the kernel command line as mentioned in
> the wiki (http://wiki.debian.org/DebianEeePC/Model/1005HA), the module
> eeepc-laptop gets loaded, but I can not use the Ethernet card anymore.
> There is no eth0. Wireless seems to work fine and I can use the kill
> switch.
[...]

Please try the latest kernel package, linux-image-2.6.32-3-686 version
2.6.32-9, from sid. Also can you say what was the last kernel version
in which the Ethernet driver worked on this computer?

Ben.

--
Ben Hutchings
If God had intended Man to program,
we'd have been born with serial I/O ports.
 
Old 03-13-2010, 06:52 AM
 
Default Bug#573607: linux-image-2.6-686: No eth0 on EeePC 1005ha with acpi_osi=Linux

> Please try the latest kernel package, linux-image-2.6.32-3-686 version
> 2.6.32-9, from sid.

Ok, I will try.


> Also can you say what was the last kernel version
> in which the Ethernet driver worked on this computer?

Ethernet works fine with 2.6.32-5 from testing,
as long as I don't add acpi_osi="Linux". This is the
only kernel I have used on that netbook. Without
acpi_osi="Linux", the fn keys and the WLAN kill
switch are not usable.

Bluetooth is not usable at all, as mentioned in Bug#573610.
--
GMX DSL: Internet, Telefon und Entertainment für nur 19,99 EUR/mtl.!
http://portal.gmx.net/de/go/dsl02



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20100313075230.297570@gmx.net">http://lists.debian.org/20100313075230.297570@gmx.net
 
Old 03-16-2010, 03:20 PM
 
Default Bug#573607: linux-image-2.6-686: No eth0 on EeePC 1005ha with acpi_osi=Linux

> Please try the latest kernel package, linux-image-2.6.32-3-686 version
> 2.6.32-9, from sid. Also can you say what was the last kernel version
> in which the Ethernet driver worked on this computer?

It seems to be still present. But I just realized that if I boot with activated *W*LAN eth0 is available, if I boot with deactivated WLAN eth0 is not available. Is the kill switch also for the Ethernet adapter? =)

Using the kill switch on runtime seems to only kill the WLAN but not the Ethernet adapter.
--
GMX DSL: Internet, Telefon und Entertainment für nur 19,99 EUR/mtl.!
http://portal.gmx.net/de/go/dsl02



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20100316162052.293730@gmx.net">http://lists.debian.org/20100316162052.293730@gmx.net
 
Old 03-17-2010, 01:15 AM
Ben Hutchings
 
Default Bug#573607: linux-image-2.6-686: No eth0 on EeePC 1005ha with acpi_osi=Linux

On Tue, 2010-03-16 at 17:20 +0100, wiekaltheut@gmx.de wrote:
> > Please try the latest kernel package, linux-image-2.6.32-3-686 version
> > 2.6.32-9, from sid. Also can you say what was the last kernel version
> > in which the Ethernet driver worked on this computer?
>
> It seems to be still present. But I just realized that if I boot with
> activated *W*LAN eth0 is available, if I boot with deactivated WLAN
> eth0 is not available. Is the kill switch also for the Ethernet
> adapter? =)

It certainly should not affect the Ethernet adapter.

I recommend that you do not use the acpi_osi="Linux" parameter. Please
report the problem with eeepc-laptop at <http://bugzilla.kernel.org>,
under product 'ACPI', component 'Platform Drivers'. Let us know the bug
number so that we can track it.

Ben.

--
Ben Hutchings
One of the nice things about standards is that there are so many of them.
 
Old 03-20-2010, 03:30 PM
 
Default Bug#573607: linux-image-2.6-686: No eth0 on EeePC 1005ha with acpi_osi=Linux

> It certainly should not affect the Ethernet adapter.
>
> I recommend that you do not use the acpi_osi="Linux" parameter. Please
> report the problem with eeepc-laptop at <http://bugzilla.kernel.org>,
> under product 'ACPI', component 'Platform Drivers'. Let us know the bug
> number so that we can track it.

I guess the following posts are addressing the problem:

Commit ced69c59811f05b2f8378467cbb82ac6ed3c6a5a in 2.6.34-rc1

https://bugzilla.kernel.org/show_bug.cgi?id=15182
https://bugzilla.kernel.org/show_bug.cgi?id=15347
https://bugzilla.kernel.org/show_bug.cgi?id=14570
--
GRATIS für alle GMX-Mitglieder: Die maxdome Movie-FLAT!
Jetzt freischalten unter http://portal.gmx.net/de/go/maxdome01



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20100320163046.245280@gmx.net">http://lists.debian.org/20100320163046.245280@gmx.net
 
Old 03-20-2010, 05:31 PM
Ben Hutchings
 
Default Bug#573607: linux-image-2.6-686: No eth0 on EeePC 1005ha with acpi_osi=Linux

On Sat, 2010-03-20 at 17:30 +0100, wiekaltheut@gmx.de wrote:
> > It certainly should not affect the Ethernet adapter.
> >
> > I recommend that you do not use the acpi_osi="Linux" parameter. Please
> > report the problem with eeepc-laptop at <http://bugzilla.kernel.org>,
> > under product 'ACPI', component 'Platform Drivers'. Let us know the bug
> > number so that we can track it.
>
> I guess the following posts are addressing the problem:
>
> Commit ced69c59811f05b2f8378467cbb82ac6ed3c6a5a in 2.6.34-rc1
>
> https://bugzilla.kernel.org/show_bug.cgi?id=15182
> https://bugzilla.kernel.org/show_bug.cgi?id=15347
> https://bugzilla.kernel.org/show_bug.cgi?id=14570

Thanks, this fix will be in the next upload.

Ben.

--
Ben Hutchings
Power corrupts. Absolute power is kind of neat.
- John Lehman, Secretary of the US Navy 1981-1987
 

Thread Tools




All times are GMT. The time now is 08:06 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright ©2007 - 2008, www.linux-archive.org