Linux Archive - Bug#570115: kernel 2.6.32-trunk can't see IDE DVR-ROM

Package: linux-image-2.6.32-trunk-686
Version: 2.6.32-5

Hello!

I use debian-testing-i386-xfce+lxde-CD-1.iso (02.2010)
And linux can't see my IDE DVD-rom (hdd: ASUS CB-5216A, ATAPI CD/DVD-ROM drive)
MB intel chipset

dmesg with 2.6.32-trunk BEGIN
++++++++++++++++++++++++++++++++
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-trunk-686 (Debian 2.6.32-5) (ben@decadent.org.uk) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Sun Jan 10 06:32:16 UTC 2010
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001bef0000 (usable)
[ 0.000000] BIOS-e820: 000000001bef0000 - 000000001bef3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001bef3000 - 000000001bf00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] last_pfn = 0x1bef0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CBFFF write-protect
[ 0.000000] CC000-F7FFF uncachable
[ 0.000000] F8000-FBFFF write-protect
[ 0.000000] FC000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FE0000000 write-back
[ 0.000000] 1 base 01C000000 mask FFC000000 write-combining
[ 0.000000] 2 base 01BF00000 mask FFFF00000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-000000001bef0000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 001bc00000 page 2M
[ 0.000000] 001bc00000 - 001bef0000 page 4k
[ 0.000000] kernel direct mapping tables up to 1bef0000 @ 7000-d000
[ 0.000000] RAMDISK: 1b772000 - 1bedfc9e
[ 0.000000] ACPI: RSDP 000f7ed0 00014 (v00 ATi )
[ 0.000000] ACPI: RSDT 1bef3040 00030 (v01 ATi AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 1bef30c0 00074 (v01 ATi AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 1bef3180 03782 (v01 ATI AWRDACPI 00001000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 1bef0000 00040
[ 0.000000] ACPI: MCFG 1bef6a80 0003C (v01 ATi AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 1bef6980 00084 (v01 ATi AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 446MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1bef0000
[ 0.000000] low ram: 0 - 1bef0000
[ 0.000000] node 0 low ram: 00000000 - 1bef0000
[ 0.000000] node 0 bootmap 00002000 - 000057e0
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 001bef0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 00014a1334] TEXT DATA BSS ==> [0001000000 - 00014a1334]
[ 0.000000] #4 [001b772000 - 001bedfc9e] RAMDISK ==> [001b772000 - 001bedfc9e]
[ 0.000000] #5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #6 [00014a2000 - 00014a80f0] BRK ==> [00014a2000 - 00014a80f0]
[ 0.000000] #7 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
[ 0.000000] #8 [0000002000 - 0000006000] BOOTMAP ==> [0000002000 - 0000006000]
[ 0.000000] found SMP MP-table at [c00f6060] f6060
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0001bef0
[ 0.000000] HighMem 0x0001bef0 -> 0x0001bef0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0001bef0
[ 0.000000] On node 0 totalpages: 114319
[ 0.000000] free_area_init_node: node 0, pgdat c138edc0, node_mem_map c14aa000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3967 pages, LIFO batch:0
[ 0.000000] Normal zone: 862 pages used for memmap
[ 0.000000] Normal zone: 109458 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 3 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 1bf00000 (gap: 1bf00000:c4100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c1c00000 s34072 r0 d23272 u1048576
[ 0.000000] pcpu-alloc: s34072 r0 d23272 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113425
[ 0.000000] Kernel command line: root=/dev/hda3 ro quiet splash
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 440152k/457664k available (2414k kernel code, 16636k reserved, 1266k data, 368k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0xdc6f0000 - 0xff3fe000 ( 557 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdbef0000 ( 446 MB)
[ 0.000000] .init : 0xc1399000 - 0xc13f5000 ( 368 kB)
[ 0.000000] .data : 0xc125bb11 - 0xc1398560 (1266 kB)
[ 0.000000] .text : 0xc1000000 - 0xc125bb11 (2414 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2666.753 MHz processor.
[ 0.008009] Calibrating delay loop (skipped), value calculated using timer frequency.. 5333.50 BogoMIPS (lpj=10667012)
[ 0.008039] Security Framework initialized
[ 0.008049] SELinux: Disabled at boot.
[ 0.008062] Mount-cache hash table entries: 512
[ 0.008268] Initializing cgroup subsys ns
[ 0.008278] Initializing cgroup subsys cpuacct
[ 0.008285] Initializing cgroup subsys devices
[ 0.008289] Initializing cgroup subsys freezer
[ 0.008292] Initializing cgroup subsys net_cls
[ 0.008330] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 0.008335] CPU: L2 cache: 256K
[ 0.008338] CPU: Hyper-Threading is disabled
[ 0.008344] mce: CPU supports 4 MCE banks
[ 0.008360] CPU0: Thermal monitoring enabled (TM2)
[ 0.008368] using mwait in idle threads.
[ 0.008380] Performance Events: no PMU driver, software events only.
[ 0.008391] Checking 'hlt' instruction... OK.
[ 0.024547] SMP alternatives: switching to UP code
[ 0.032142] ACPI: Core revision 20090903
[ 0.044600] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.086633] CPU0: Intel(R) Celeron(R) CPU 2.66GHz stepping 09
[ 0.088001] Brought up 1 CPUs
[ 0.088001] Total of 1 processors activated (5333.50 BogoMIPS).
[ 0.088001] CPU0 attaching NULL sched-domain.
[ 0.088001] devtmpfs: initialized
[ 0.088001] regulator: core version 0.5
[ 0.088001] NET: Registered protocol family 16
[ 0.088001] ACPI: bus type pci registered
[ 0.088001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.088001] PCI: MCFG area at e0000000 reserved in E820
[ 0.088001] PCI: Using MMCONFIG for extended config space
[ 0.088001] PCI: Using configuration type 1 for base access
[ 0.088001] bio: create slab <bio-0> at 0
[ 0.088001] ACPI: EC: Look up EC in DSDT
[ 0.092907] ACPI: Interpreter enabled
[ 0.092923] ACPI: (supports S0 S3 S4 S5)
[ 0.092958] ACPI: Using IOAPIC for interrupt routing
[ 0.098276] ACPI: No dock devices found.
[ 0.098456] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.098540] pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff]
[ 0.098698] pci 0000:00:11.0: reg 10 io port: [0xff00-0xff07]
[ 0.098710] pci 0000:00:11.0: reg 14 io port: [0xfe00-0xfe03]
[ 0.098721] pci 0000:00:11.0: reg 18 io port: [0xfd00-0xfd07]
[ 0.098733] pci 0000:00:11.0: reg 1c io port: [0xfc00-0xfc03]
[ 0.098744] pci 0000:00:11.0: reg 20 io port: [0xfb00-0xfb0f]
[ 0.098756] pci 0000:00:11.0: reg 24 32bit mmio: [0xfe02f000-0xfe02f1ff]
[ 0.098768] pci 0000:00:11.0: reg 30 32bit mmio pref: [0x000000-0x07ffff]
[ 0.098811] pci 0000:00:11.0: supports D1 D2
[ 0.098886] pci 0000:00:12.0: reg 10 io port: [0xfa00-0xfa07]
[ 0.098897] pci 0000:00:12.0: reg 14 io port: [0xf900-0xf903]
[ 0.098909] pci 0000:00:12.0: reg 18 io port: [0xf800-0xf807]
[ 0.098920] pci 0000:00:12.0: reg 1c io port: [0xf700-0xf703]
[ 0.098931] pci 0000:00:12.0: reg 20 io port: [0xf600-0xf60f]
[ 0.098943] pci 0000:00:12.0: reg 24 32bit mmio: [0xfe02e000-0xfe02e1ff]
[ 0.098954] pci 0000:00:12.0: reg 30 32bit mmio pref: [0x000000-0x07ffff]
[ 0.098997] pci 0000:00:12.0: supports D1 D2
[ 0.099060] pci 0000:00:13.0: reg 10 32bit mmio: [0xfe02d000-0xfe02dfff]
[ 0.099198] pci 0000:00:13.1: reg 10 32bit mmio: [0xfe02c000-0xfe02cfff]
[ 0.099349] pci 0000:00:13.2: reg 10 32bit mmio: [0xfe02b000-0xfe02bfff]
[ 0.099439] pci 0000:00:13.2: supports D1 D2
[ 0.099442] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.099450] pci 0000:00:13.2: PME# disabled
[ 0.099502] pci 0000:00:14.0: reg 10 io port: [0xb00-0xb0f]
[ 0.099513] pci 0000:00:14.0: reg 14 32bit mmio: [0xfe02a000-0xfe02a3ff]
[ 0.099561] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.099621] pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
[ 0.099632] pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
[ 0.099643] pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
[ 0.099655] pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
[ 0.099666] pci 0000:00:14.1: reg 20 io port: [0xf400-0xf40f]
[ 0.099793] pci 0000:00:14.2: reg 10 64bit mmio: [0xfe024000-0xfe027fff]
[ 0.099876] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.099882] pci 0000:00:14.2: PME# disabled
[ 0.100145] pci 0000:01:05.0: reg 10 32bit mmio pref: [0xd8000000-0xdfffffff]
[ 0.100154] pci 0000:01:05.0: reg 14 io port: [0xee00-0xeeff]
[ 0.100161] pci 0000:01:05.0: reg 18 32bit mmio: [0xfdef0000-0xfdefffff]
[ 0.100179] pci 0000:01:05.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.100199] pci 0000:01:05.0: supports D1 D2
[ 0.100234] pci 0000:00:01.0: bridge io port: [0xe000-0xefff]
[ 0.100239] pci 0000:00:01.0: bridge 32bit mmio: [0xfde00000-0xfdefffff]
[ 0.100244] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd8000000-0xdfffffff]
[ 0.100318] pci 0000:02:02.0: reg 10 io port: [0xde00-0xdeff]
[ 0.100332] pci 0000:02:02.0: reg 14 32bit mmio: [0xfddff000-0xfddff0ff]
[ 0.100419] pci 0000:02:02.0: supports D1 D2
[ 0.100422] pci 0000:02:02.0: PME# supported from D1 D2 D3hot D3cold
[ 0.100430] pci 0000:02:02.0: PME# disabled
[ 0.100513] pci 0000:00:14.4: transparent bridge
[ 0.100525] pci 0000:00:14.4: bridge io port: [0xd000-0xdfff]
[ 0.100532] pci 0000:00:14.4: bridge 32bit mmio: [0xfdd00000-0xfddfffff]
[ 0.100540] pci 0000:00:14.4: bridge 32bit mmio pref: [0xfdc00000-0xfdcfffff]
[ 0.100557] pci_bus 0000:00: on NUMA node 0
[ 0.100569] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.100847] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.101018] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.113628] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.113781] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.113931] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.114080] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.114228] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.114377] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11)
[ 0.114525] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11)
[ 0.114672] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11)
[ 0.114838] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks= none
[ 0.114844] vgaarb: loaded
[ 0.114981] PCI: Using ACPI for IRQ routing
[ 0.114999] pci 0000:00:00.0: BAR 3: address space collision on of device [0xe0000000-0xffffffff]
[ 0.115055] pci 0000:00:00.0: BAR 3: can't allocate resource
[ 0.115273] Switching to clocksource tsc
[ 0.115998] pnp: PnP ACPI init
[ 0.115998] ACPI: bus type pnp registered
[ 0.117638] pnp 00:0c: mem resource (0xcc000-0xcffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.117645] pnp 00:0c: mem resource (0xf0000-0xf7fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.117650] pnp 00:0c: mem resource (0xf8000-0xfbfff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.117655] pnp 00:0c: mem resource (0xfc000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.117660] pnp 00:0c: mem resource (0x1bf00000-0x1bffffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.117665] pnp 00:0c: mem resource (0x1bef0000-0x1befffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.117670] pnp 00:0c: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.117675] pnp 00:0c: mem resource (0x100000-0x1beeffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.117773] pnp: PnP ACPI: found 13 devices
[ 0.117777] ACPI: ACPI bus type pnp unregistered
[ 0.117784] PnPBIOS: Disabled by ACPI PNP
[ 0.117802] system 00:01: ioport range 0x228-0x22f has been reserved
[ 0.117807] system 00:01: ioport range 0x40b-0x40b has been reserved
[ 0.117811] system 00:01: ioport range 0x4d6-0x4d6 has been reserved
[ 0.117815] system 00:01: ioport range 0xc00-0xc01 has been reserved
[ 0.117819] system 00:01: ioport range 0xc14-0xc14 has been reserved
[ 0.117823] system 00:01: ioport range 0xc50-0xc52 has been reserved
[ 0.117827] system 00:01: ioport range 0xc6c-0xc6d has been reserved
[ 0.117831] system 00:01: ioport range 0xc6f-0xc6f has been reserved
[ 0.117835] system 00:01: ioport range 0xcd4-0xcdf has been reserved
[ 0.117839] system 00:01: ioport range 0x4000-0x40fe has been reserved
[ 0.117843] system 00:01: ioport range 0x4210-0x4217 has been reserved
[ 0.117855] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
[ 0.117860] system 00:06: ioport range 0x800-0x87f has been reserved
[ 0.117863] system 00:06: ioport range 0x880-0x88f has been reserved
[ 0.117875] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.117884] system 00:0c: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.117889] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.117894] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.117898] system 00:0c: iomem range 0xfff80000-0xfffeffff has been reserved
[ 0.152797] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.152803] pci 0000:00:01.0: IO window: 0xe000-0xefff
[ 0.152810] pci 0000:00:01.0: MEM window: 0xfde00000-0xfdefffff
[ 0.152815] pci 0000:00:01.0: PREFETCH window: 0xd8000000-0xdfffffff
[ 0.152821] pci 0000:00:14.4: PCI bridge, secondary bus 0000:02
[ 0.152826] pci 0000:00:14.4: IO window: 0xd000-0xdfff
[ 0.152835] pci 0000:00:14.4: MEM window: 0xfdd00000-0xfddfffff
[ 0.152843] pci 0000:00:14.4: PREFETCH window: 0xfdc00000-0xfdcfffff
[ 0.152871] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.152875] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.152879] pci_bus 0000:01: resource 0 io: [0xe000-0xefff]
[ 0.152883] pci_bus 0000:01: resource 1 mem: [0xfde00000-0xfdefffff]
[ 0.152887] pci_bus 0000:01: resource 2 pref mem [0xd8000000-0xdfffffff]
[ 0.152891] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff]
[ 0.152895] pci_bus 0000:02: resource 1 mem: [0xfdd00000-0xfddfffff]
[ 0.152898] pci_bus 0000:02: resource 2 pref mem [0xfdc00000-0xfdcfffff]
[ 0.152902] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.152906] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[ 0.152958] NET: Registered protocol family 2
[ 0.153107] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.153522] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.153619] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.153729] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.153734] TCP reno registered
[ 0.153957] NET: Registered protocol family 1
[ 0.153985] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[ 0.232676] pci 0000:01:05.0: Boot video device
[ 0.232765] Unpacking initramfs...
[ 0.549899] Freeing initrd memory: 7607k freed
[ 0.562788] audit: initializing netlink socket (disabled)
[ 0.562814] type=2000 audit(1266334684.560:1): initialized
[ 0.563049] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.564948] VFS: Disk quotas dquot_6.5.2
[ 0.565048] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.565190] msgmni has been set to 875
[ 0.565540] alg: No test for stdrng (krng)
[ 0.565651] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.565656] io scheduler noop registered
[ 0.565658] io scheduler anticipatory registered
[ 0.565661] io scheduler deadline registered
[ 0.565717] io scheduler cfq registered (default)
[ 0.565956] isapnp: Scanning for PnP cards...
[ 0.920700] isapnp: No Plug & Play device found
[ 0.922974] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.923139] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.923729] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.923970] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.923974] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.924718] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.924890] mice: PS/2 mouse device common for all mice
[ 0.924925] Driver 'rtc_cmos' needs updating - please use bus_type methods
[ 0.924981] rtc_cmos 00:03: RTC can wake from S4
[ 0.925057] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.925095] rtc0: alarms up to one month, 242 bytes nvram
[ 0.925118] cpuidle: using governor ladder
[ 0.925122] cpuidle: using governor menu
[ 0.925129] No iBFT detected.
[ 0.925626] TCP cubic registered
[ 0.925808] NET: Registered protocol family 10
[ 0.926538] lo: Disabled Privacy Extensions
[ 0.927041] Mobile IPv6
[ 0.927047] NET: Registered protocol family 17
[ 0.927081] Using IPI No-Shortcut mode
[ 0.927263] registered taskstats version 1
[ 0.927719] rtc_cmos 00:03: setting system clock to 2010-02-16 15:38:05 UTC (1266334685)
[ 0.927793] Freeing unused kernel memory: 368k freed
[ 0.928287] Write protecting the kernel text: 2416k
[ 0.928308] Write protecting the kernel read-only data: 872k
[ 0.942655] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.106067] fan PNP0C0B:00: registered as cooling_device0
[ 1.106077] ACPI: Fan [FAN] (on)
[ 1.113440] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.113454] ACPI: Thermal Zone [THRM] (40 C)
[ 1.268205] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 1.268218] ACPI: Power Button [PWRB]
[ 1.268336] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.268344] ACPI: Power Button [PWRF]
[ 1.372291] Linux agpgart interface v0.103
[ 1.414747] Uniform Multi-Platform E-IDE driver
[ 1.419898] SCSI subsystem initialized
[ 1.455058] Floppy drive(s): fd0 is 1.44M
[ 1.455837] libata version 3.00 loaded.
[ 1.472360] FDC 0 is a post-1991 82077
[ 1.478418] atiixp 0000:00:14.1: IDE controller (0x1002:0x4376 rev 0x80)
[ 1.478447] ATIIXP_IDE 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.478484] atiixp 0000:00:14.1: not 100% native mode: will probe irqs later
[ 1.478495] ide0: BM-DMA at 0xf400-0xf407
[ 1.478509] ide1: BM-DMA at 0xf408-0xf40f
[ 1.478517] Probing IDE interface ide0...
[ 1.495931] 8139too Fast Ethernet driver 0.9.28
[ 1.496048] 8139too 0000:02:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 1.500332] usbcore: registered new interface driver usbfs
[ 1.500631] usbcore: registered new interface driver hub
[ 1.500949] usbcore: registered new device driver usb
[ 1.502217] eth0: RealTek RTL8139 at 0xde00, 00:16:76:4a:37:4f, IRQ 21
[ 1.509928] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 1.515015] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.764481] hda: ST380011A, ATA DISK drive
[ 2.436102] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 2.436450] hda: UDMA/100 mode selected
[ 2.436723] Probing IDE interface ide1...
[ 2.442681] ide1: no devices on the port
[ 2.442961] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 2.455908] ide1 at 0x170-0x177,0x376 on irq 15
[ 2.456213] sata_sil 0000:00:11.0: version 2.4
[ 2.456282] sata_sil 0000:00:11.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.458307] scsi0 : sata_sil
[ 2.458626] scsi1 : sata_sil
[ 2.458711] ata1: SATA max UDMA/100 mmio m512@0xfe02f000 tf 0xfe02f080 irq 23
[ 2.458717] ata2: SATA max UDMA/100 mmio m512@0xfe02f000 tf 0xfe02f0c0 irq 23
[ 2.459006] ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.459047] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 2.459097] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
[ 2.459187] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe02b000
[ 2.468015] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 2.468087] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.468091] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.468095] usb usb1: Product: EHCI Host Controller
[ 2.468098] usb usb1: Manufacturer: Linux 2.6.32-trunk-686 ehci_hcd
[ 2.468101] usb usb1: SerialNumber: 0000:00:13.2
[ 2.468251] usb usb1: configuration #1 chosen from 1 choice
[ 2.468303] hub 1-0:1.0: USB hub found
[ 2.468319] hub 1-0:1.0: 8 ports detected
[ 2.468891] sata_sil 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 2.469142] scsi2 : sata_sil
[ 2.469418] scsi3 : sata_sil
[ 2.469500] ata3: SATA max UDMA/100 mmio m512@0xfe02e000 tf 0xfe02e080 irq 22
[ 2.469506] ata4: SATA max UDMA/100 mmio m512@0xfe02e000 tf 0xfe02e0c0 irq 22
[ 2.487069] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.487119] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.487160] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 2.487185] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 2.487219] ohci_hcd 0000:00:13.0: irq 19, io mem 0xfe02d000
[ 2.544045] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.544052] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.544056] usb usb2: Product: OHCI Host Controller
[ 2.544059] usb usb2: Manufacturer: Linux 2.6.32-trunk-686 ohci_hcd
[ 2.544062] usb usb2: SerialNumber: 0000:00:13.0
[ 2.544362] usb usb2: configuration #1 chosen from 1 choice
[ 2.544520] hub 2-0:1.0: USB hub found
[ 2.544545] hub 2-0:1.0: 4 ports detected
[ 2.544681] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.544726] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 2.544746] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 2.544778] ohci_hcd 0000:00:13.1: irq 19, io mem 0xfe02c000
[ 2.604036] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.604041] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.604045] usb usb3: Product: OHCI Host Controller
[ 2.604048] usb usb3: Manufacturer: Linux 2.6.32-trunk-686 ohci_hcd
[ 2.604051] usb usb3: SerialNumber: 0000:00:13.1
[ 2.604351] usb usb3: configuration #1 chosen from 1 choice
[ 2.604501] hub 3-0:1.0: USB hub found
[ 2.604527] hub 3-0:1.0: 4 ports detected
[ 2.776049] ata1: SATA link down (SStatus 0 SControl 310)
[ 2.788031] ata3: SATA link down (SStatus 0 SControl 310)
[ 3.096035] ata2: SATA link down (SStatus 0 SControl 310)
[ 3.112019] usb 3-1: new full speed USB device using ohci_hcd and address 2
[ 3.323058] usb 3-1: New USB device found, idVendor=04fc, idProduct=0801
[ 3.323064] usb 3-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 3.323067] usb 3-1: Product: USB Multi-Smart Mouse
[ 3.323241] usb 3-1: configuration #1 chosen from 1 choice
[ 3.416037] ata4: SATA link down (SStatus 0 SControl 310)
[ 3.444214] ide-gd driver 1.18
[ 3.444275] hda: max request size: 512KiB
[ 3.453111] hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63
[ 3.453567] hda: cache flushes supported
[ 3.453663] hda:
[ 3.460592] usbcore: registered new interface driver hiddev
[ 3.461407] hda1 hda2 <
[ 3.465867] input: USB Multi-Smart Mouse as /devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1:1.0/input/input3
[ 3.466297] generic-usb 0003:04FC:0801.0001: input,hidraw0: USB HID v1.11 Mouse [USB Multi-Smart Mouse] on usb-0000:00:13.1-1/input0
[ 3.466354] usbcore: registered new interface driver usbhid
[ 3.466618] usbhid: v2.6:USB HID core driver
[ 3.474858] hda5 > hda3 hda4
[ 3.934842] kjournald starting. Commit interval 5 seconds
[ 3.934864] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.172707] udev: starting version 150
[ 5.593246] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 5.637070] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 5.638307] processor LNXCPU:00: registered as cooling_device1
[ 5.766365] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.791585] ACPI: I/O resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SM00 [0xb00-0xb07]
[ 5.791655] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.252640] parport_pc 00:09: reported by Plug and Play ACPI
[ 6.252730] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 6.920441] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.004680] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input5
[ 7.627081] Adding 1052216k swap on /dev/hda1. Priority:-1 extents:1 across:1052216k
[ 7.755978] EXT3 FS on hda3, internal journal
[ 7.881905] loop: module loaded
[ 7.912521] fuse init (API version 7.13)
[ 8.312804] kjournald starting. Commit interval 5 seconds
[ 8.313043] EXT3 FS on hda4, internal journal
[ 8.313052] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.900521] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 11.165049] lp0: using parport0 (interrupt-driven).
[ 11.172535] ppdev: user-space parallel port driver
[ 14.067656] pci 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 14.156252] [drm] Initialized drm 1.1.0 20060810
[ 14.227049] [drm] radeon defaulting to userspace modesetting.
[ 14.229878] [drm] Initialized radeon 1.31.0 20080528 for 0000:01:05.0 on minor 0
[ 14.602315] [drm] Setting GART location based on new memory map
[ 14.602828] [drm] Loading R300 Microcode
[ 14.603318] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[ 14.636246] radeon_cp: Failed to load firmware "radeon/R300_cp.bin"
[ 14.636255] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware!
[ 19.464009] eth0: no IPv6 routers present
++++++++++++++++++++++++++++++++
dmesg with 2.6.32-trunk END

But when i try old kernel - my DVD-rom work good
dmesg with 2.6.30-2-486 BEGIN
++++++++++++++++++++++++++++++++
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.30-2-486 (Debian 2.6.30-8squeeze1) (dannf@debian.org) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 Thu Dec 3 23:32:25 UTC 2009
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001bef0000 (usable)
[ 0.000000] BIOS-e820: 000000001bef0000 - 000000001bef3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001bef3000 - 000000001bf00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] last_pfn = 0x1bef0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CBFFF write-protect
[ 0.000000] CC000-F7FFF uncachable
[ 0.000000] F8000-FBFFF write-protect
[ 0.000000] FC000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FE0000000 write-back
[ 0.000000] 1 base 01C000000 mask FFC000000 write-combining
[ 0.000000] 2 base 01BF00000 mask FFFF00000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] init_memory_mapping: 0000000000000000-000000001bef0000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 001bc00000 page 2M
[ 0.000000] 001bc00000 - 001bef0000 page 4k
[ 0.000000] kernel direct mapping tables up to 1bef0000 @ 7000-c000
[ 0.000000] RAMDISK: 1b7ee000 - 1bedff54
[ 0.000000] ACPI: RSDP 000f7ed0 00014 (v00 ATi )
[ 0.000000] ACPI: RSDT 1bef3040 00030 (v01 ATi AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 1bef30c0 00074 (v01 ATi AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 1bef3180 03782 (v01 ATI AWRDACPI 00001000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 1bef0000 00040
[ 0.000000] ACPI: MCFG 1bef6a80 0003C (v01 ATi AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 1bef6980 00084 (v01 ATi AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 446MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1bef0000
[ 0.000000] low ram: 0 - 1bef0000
[ 0.000000] node 0 low ram: 00000000 - 1bef0000
[ 0.000000] node 0 bootmap 00001000 - 000047e0
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 001bef0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000100000 - 00004e31fc] TEXT DATA BSS ==> [0000100000 - 00004e31fc]
[ 0.000000] #2 [001b7ee000 - 001bedff54] RAMDISK ==> [001b7ee000 - 001bedff54]
[ 0.000000] #3 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #4 [00004e4000 - 00004e60f0] BRK ==> [00004e4000 - 00004e60f0]
[ 0.000000] #5 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #6 [0000001000 - 0000005000] BOOTMAP ==> [0000001000 - 0000005000]
[ 0.000000] found SMP MP-table at [c00f6060] f6060
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0001bef0
[ 0.000000] HighMem 0x0001bef0 -> 0x0001bef0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0001bef0
[ 0.000000] On node 0 totalpages: 114319
[ 0.000000] free_area_init_node: node 0, pgdat c03f226c, node_mem_map c1000000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3967 pages, LIFO batch:0
[ 0.000000] Normal zone: 862 pages used for memmap
[ 0.000000] Normal zone: 109458 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 1bf00000:c4100000)
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113425
[ 0.000000] Kernel command line: root=UUID=f658f4a3-69cb-4e8c-a920-5703cf483e2d ro single
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] NR_IRQS:288
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2666.985 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.004000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.004000] Memory: 441924k/457664k available (2077k kernel code, 15120k reserved, 977k data, 412k init, 0k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xfffa8000 - 0xfffff000 ( 348 kB)
[ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.004000] vmalloc : 0xdc6f0000 - 0xff7fe000 ( 561 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xdbef0000 ( 446 MB)
[ 0.004000] .init : 0xc03fe000 - 0xc0465000 ( 412 kB)
[ 0.004000] .data : 0xc03077cb - 0xc03fbf28 ( 977 kB)
[ 0.004000] .text : 0xc0100000 - 0xc03077cb (2077 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004013] Calibrating delay loop (skipped), value calculated using timer frequency.. 5333.97 BogoMIPS (lpj=10667940)
[ 0.004157] Security Framework initialized
[ 0.004212] SELinux: Disabled at boot.
[ 0.004274] Mount-cache hash table entries: 512
[ 0.004459] Initializing cgroup subsys ns
[ 0.004516] Initializing cgroup subsys cpuacct
[ 0.004568] Initializing cgroup subsys devices
[ 0.004619] Initializing cgroup subsys freezer
[ 0.004670] Initializing cgroup subsys net_cls
[ 0.004752] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 0.004845] CPU: L2 cache: 256K
[ 0.004897] using mwait in idle threads.
[ 0.004956] CPU: Intel(R) Celeron(R) CPU 2.66GHz stepping 09
[ 0.005095] Checking 'hlt' instruction... OK.
[ 0.022336] ACPI: Core revision 20090320
[ 0.036613] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.080001] net_namespace: 1076 bytes
[ 0.080001] Booting paravirtualized kernel on bare hardware
[ 0.080001] regulator: core version 0.5
[ 0.080001] NET: Registered protocol family 16
[ 0.080001] EISA bus registered
[ 0.080001] ACPI: bus type pci registered
[ 0.080001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.080001] PCI: MCFG area at e0000000 reserved in E820
[ 0.080001] PCI: Using MMCONFIG for extended config space
[ 0.080001] PCI: Using configuration type 1 for base access
[ 0.080495] bio: create slab <bio-0> at 0
[ 0.081387] ACPI: EC: Look up EC in DSDT
[ 0.087471] ACPI: Interpreter enabled
[ 0.087539] ACPI: (supports S0 S3 S4 S5)
[ 0.087781] ACPI: Using IOAPIC for interrupt routing
[ 0.095760] ACPI: No dock devices found.
[ 0.095840] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.096082] pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff]
[ 0.096235] pci 0000:00:11.0: reg 10 io port: [0xff00-0xff07]
[ 0.096247] pci 0000:00:11.0: reg 14 io port: [0xfe00-0xfe03]
[ 0.096259] pci 0000:00:11.0: reg 18 io port: [0xfd00-0xfd07]
[ 0.096270] pci 0000:00:11.0: reg 1c io port: [0xfc00-0xfc03]
[ 0.096282] pci 0000:00:11.0: reg 20 io port: [0xfb00-0xfb0f]
[ 0.096293] pci 0000:00:11.0: reg 24 32bit mmio: [0xfe02f000-0xfe02f1ff]
[ 0.096305] pci 0000:00:11.0: reg 30 32bit mmio: [0x000000-0x07ffff]
[ 0.096348] pci 0000:00:11.0: supports D1 D2
[ 0.096422] pci 0000:00:12.0: reg 10 io port: [0xfa00-0xfa07]
[ 0.096434] pci 0000:00:12.0: reg 14 io port: [0xf900-0xf903]
[ 0.096445] pci 0000:00:12.0: reg 18 io port: [0xf800-0xf807]
[ 0.096457] pci 0000:00:12.0: reg 1c io port: [0xf700-0xf703]
[ 0.096468] pci 0000:00:12.0: reg 20 io port: [0xf600-0xf60f]
[ 0.096479] pci 0000:00:12.0: reg 24 32bit mmio: [0xfe02e000-0xfe02e1ff]
[ 0.096491] pci 0000:00:12.0: reg 30 32bit mmio: [0x000000-0x07ffff]
[ 0.096533] pci 0000:00:12.0: supports D1 D2
[ 0.096596] pci 0000:00:13.0: reg 10 32bit mmio: [0xfe02d000-0xfe02dfff]
[ 0.096735] pci 0000:00:13.1: reg 10 32bit mmio: [0xfe02c000-0xfe02cfff]
[ 0.096883] pci 0000:00:13.2: reg 10 32bit mmio: [0xfe02b000-0xfe02bfff]
[ 0.096972] pci 0000:00:13.2: supports D1 D2
[ 0.096975] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.097034] pci 0000:00:13.2: PME# disabled
[ 0.097133] pci 0000:00:14.0: reg 10 io port: [0xb00-0xb0f]
[ 0.097145] pci 0000:00:14.0: reg 14 32bit mmio: [0xfe02a000-0xfe02a3ff]
[ 0.097191] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.097301] pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
[ 0.097313] pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
[ 0.097324] pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
[ 0.097335] pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
[ 0.097347] pci 0000:00:14.1: reg 20 io port: [0xf400-0xf40f]
[ 0.097472] pci 0000:00:14.2: reg 10 64bit mmio: [0xfe024000-0xfe027fff]
[ 0.097554] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.097611] pci 0000:00:14.2: PME# disabled
[ 0.097876] pci 0000:01:05.0: reg 10 32bit mmio: [0xd8000000-0xdfffffff]
[ 0.097884] pci 0000:01:05.0: reg 14 io port: [0xee00-0xeeff]
[ 0.097891] pci 0000:01:05.0: reg 18 32bit mmio: [0xfdef0000-0xfdefffff]
[ 0.097908] pci 0000:01:05.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.097928] pci 0000:01:05.0: supports D1 D2
[ 0.097962] pci 0000:00:01.0: bridge io port: [0xe000-0xefff]
[ 0.097966] pci 0000:00:01.0: bridge 32bit mmio: [0xfde00000-0xfdefffff]
[ 0.097972] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd8000000-0xdfffffff]
[ 0.098045] pci 0000:02:02.0: reg 10 io port: [0xde00-0xdeff]
[ 0.098058] pci 0000:02:02.0: reg 14 32bit mmio: [0xfddff000-0xfddff0ff]
[ 0.098143] pci 0000:02:02.0: supports D1 D2
[ 0.098147] pci 0000:02:02.0: PME# supported from D1 D2 D3hot D3cold
[ 0.098204] pci 0000:02:02.0: PME# disabled
[ 0.098335] pci 0000:00:14.4: transparent bridge
[ 0.098394] pci 0000:00:14.4: bridge io port: [0xd000-0xdfff]
[ 0.098402] pci 0000:00:14.4: bridge 32bit mmio: [0xfdd00000-0xfddfffff]
[ 0.098409] pci 0000:00:14.4: bridge 32bit mmio pref: [0xfdc00000-0xfdcfffff]
[ 0.098428] pci_bus 0000:00: on NUMA node 0
[ 0.098444] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.098713] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.098875] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.112971] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.113627] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.114274] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.114916] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.115559] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.116206] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11)
[ 0.116764] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11)
[ 0.117322] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11)
[ 0.118266] PCI: Using ACPI for IRQ routing
[ 0.118336] pci 0000:00:00.0: BAR 3: can't allocate resource
[ 0.118796] pnp: PnP ACPI init
[ 0.118869] ACPI: bus type pnp registered
[ 0.123934] pnp 00:0c: mem resource (0xcc000-0xcffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.124031] pnp 00:0c: mem resource (0xf0000-0xf7fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.124095] pnp 00:0c: mem resource (0xf8000-0xfbfff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.124158] pnp 00:0c: mem resource (0xfc000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.124221] pnp 00:0c: mem resource (0x1bf00000-0x1bffffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.124284] pnp 00:0c: mem resource (0x1bef0000-0x1befffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.124348] pnp 00:0c: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.124956] pnp 00:0c: mem resource (0x100000-0x1beeffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.125199] pnp: PnP ACPI: found 13 devices
[ 0.125255] ACPI: ACPI bus type pnp unregistered
[ 0.125312] PnPBIOS: Disabled by ACPI PNP
[ 0.125383] system 00:01: ioport range 0x228-0x22f has been reserved
[ 0.125438] system 00:01: ioport range 0x40b-0x40b has been reserved
[ 0.125492] system 00:01: ioport range 0x4d6-0x4d6 has been reserved
[ 0.125546] system 00:01: ioport range 0xc00-0xc01 has been reserved
[ 0.125599] system 00:01: ioport range 0xc14-0xc14 has been reserved
[ 0.125653] system 00:01: ioport range 0xc50-0xc52 has been reserved
[ 0.125707] system 00:01: ioport range 0xc6c-0xc6d has been reserved
[ 0.125760] system 00:01: ioport range 0xc6f-0xc6f has been reserved
[ 0.125814] system 00:01: ioport range 0xcd4-0xcdf has been reserved
[ 0.125868] system 00:01: ioport range 0x4000-0x40fe has been reserved
[ 0.125922] system 00:01: ioport range 0x4210-0x4217 has been reserved
[ 0.125985] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
[ 0.126039] system 00:06: ioport range 0x800-0x87f has been reserved
[ 0.126092] system 00:06: ioport range 0x880-0x88f has been reserved
[ 0.126158] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.126219] system 00:0c: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.126275] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.126335] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.126389] system 00:0c: iomem range 0xfff80000-0xfffeffff has been reserved
[ 0.161767] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.161828] pci 0000:00:01.0: IO window: 0xe000-0xefff
[ 0.161883] pci 0000:00:01.0: MEM window: 0xfde00000-0xfdefffff
[ 0.161938] pci 0000:00:01.0: PREFETCH window: 0x000000d8000000-0x000000dfffffff
[ 0.162001] pci 0000:00:14.4: PCI bridge, secondary bus 0000:02
[ 0.162056] pci 0000:00:14.4: IO window: 0xd000-0xdfff
[ 0.162113] pci 0000:00:14.4: MEM window: 0xfdd00000-0xfddfffff
[ 0.162170] pci 0000:00:14.4: PREFETCH window: 0x000000fdc00000-0x000000fdcfffff
[ 0.162260] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.162264] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.162268] pci_bus 0000:01: resource 0 io: [0xe000-0xefff]
[ 0.162272] pci_bus 0000:01: resource 1 mem: [0xfde00000-0xfdefffff]
[ 0.162275] pci_bus 0000:01: resource 2 pref mem [0xd8000000-0xdfffffff]
[ 0.162279] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff]
[ 0.162283] pci_bus 0000:02: resource 1 mem: [0xfdd00000-0xfddfffff]
[ 0.162286] pci_bus 0000:02: resource 2 pref mem [0xfdc00000-0xfdcfffff]
[ 0.162290] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.162293] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[ 0.162374] NET: Registered protocol family 2
[ 0.162552] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.163008] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.163152] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.163253] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.163307] TCP reno registered
[ 0.163514] NET: Registered protocol family 1
[ 0.163664] Trying to unpack rootfs image as initramfs...
[ 0.456395] Freeing initrd memory: 7111k freed
[ 0.469252] audit: initializing netlink socket (disabled)
[ 0.469334] type=2000 audit(1266253072.467:1): initialized
[ 0.469604] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.469737] VFS: Disk quotas dquot_6.5.2
[ 0.469835] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.469951] msgmni has been set to 877
[ 0.470229] alg: No test for stdrng (krng)
[ 0.470408] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.470473] io scheduler noop registered
[ 0.470523] io scheduler anticipatory registered
[ 0.470574] io scheduler deadline registered
[ 0.470639] io scheduler cfq registered (default)
[ 0.470700] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[ 0.548016] pci 0000:01:05.0: Boot video device
[ 0.548734] isapnp: Scanning for PnP cards...
[ 0.703997] Switched to high resolution mode on CPU 0
[ 0.900487] isapnp: No Plug & Play device found
[ 0.906491] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.906771] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.907733] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.910765] brd: module loaded
[ 0.910990] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.911047] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.911638] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.912032] mice: PS/2 mouse device common for all mice
[ 0.912210] rtc_cmos 00:03: RTC can wake from S4
[ 0.912419] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.912506] rtc0: alarms up to one month, 242 bytes nvram
[ 0.912770] EISA: Probing bus 0 at eisa.0
[ 0.912847] Cannot allocate resource for EISA slot 4
[ 0.912918] EISA: Detected 0 cards.
[ 0.912970] cpuidle: using governor ladder
[ 0.913022] cpuidle: using governor menu
[ 0.913078] No iBFT detected.
[ 0.913603] TCP cubic registered
[ 0.913698] NET: Registered protocol family 10
[ 0.914343] lo: Disabled Privacy Extensions
[ 0.914787] Mobile IPv6
[ 0.914860] NET: Registered protocol family 17
[ 0.914924] Using IPI Shortcut mode
[ 0.915346] registered taskstats version 1
[ 0.915567] rtc_cmos 00:03: setting system clock to 2010-02-15 16:57:53 UTC (1266253073)
[ 0.915696] Freeing unused kernel memory: 412k freed
[ 0.916383] Write protecting the kernel text: 2080k
[ 0.916452] Write protecting the kernel read-only data: 764k
[ 0.930859] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.077784] fan PNP0C0B:00: registered as cooling_device0
[ 1.077856] ACPI: Fan [FAN] (on)
[ 1.085385] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.085457] ACPI: Thermal Zone [THRM] (40 C)
[ 1.125203] Linux agpgart interface v0.103
[ 1.159135] Floppy drive(s): fd0 is 1.44M
[ 1.187037] SCSI subsystem initialized
[ 1.191047] FDC 0 is a post-1991 82077
[ 1.278389] Uniform Multi-Platform E-IDE driver
[ 1.318520] 8139too Fast Ethernet driver 0.9.28
[ 1.318640] 8139too 0000:02:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 1.320634] eth0: RealTek RTL8139 at 0xde00, 00:16:76:4a:37:4f, IRQ 21
[ 1.320691] eth0: Identified 8139 chip type 'RTL-8101'
[ 1.390407] atiixp 0000:00:14.1: IDE controller (0x1002:0x4376 rev 0x80)
[ 1.390494] ATIIXP_IDE 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.390577] atiixp 0000:00:14.1: not 100% native mode: will probe irqs later
[ 1.390638] ide0: BM-DMA at 0xf400-0xf407
[ 1.390701] ide1: BM-DMA at 0xf408-0xf40f
[ 1.390757] Probing IDE interface ide0...
[ 1.412697] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 1.413650] usbcore: registered new interface driver usbfs
[ 1.413756] usbcore: registered new interface driver hub
[ 1.413880] usbcore: registered new device driver usb
[ 1.420088] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.437244] libata version 3.00 loaded.
[ 1.676480] hda: ST380011A, ATA DISK drive
[ 2.348096] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 2.348410] hda: UDMA/100 mode selected
[ 2.348753] Probing IDE interface ide1...
[ 3.416023] hdd: ASUS CB-5216A, ATAPI CD/DVD-ROM drive
[ 3.416231] hdd: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 3.416342] hdd: drive side 80-wire cable detection failed, limiting max speed to UDMA33
[ 3.416404] hdd: UDMA/33 mode selected
[ 3.416650] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 3.431744] ide1 at 0x170-0x177,0x376 on irq 15
[ 3.432705] ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 3.432793] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 3.432914] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
[ 3.433061] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe02b000
[ 3.444028] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 3.444149] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.444204] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.444263] usb usb1: Product: EHCI Host Controller
[ 3.444315] usb usb1: Manufacturer: Linux 2.6.30-2-486 ehci_hcd
[ 3.444367] usb usb1: SerialNumber: 0000:00:13.2
[ 3.444530] usb usb1: configuration #1 chosen from 1 choice
[ 3.444630] hub 1-0:1.0: USB hub found
[ 3.444695] hub 1-0:1.0: 8 ports detected
[ 3.449433] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.450115] sata_sil 0000:00:11.0: version 2.4
[ 3.450189] sata_sil 0000:00:11.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.450745] scsi0 : sata_sil
[ 3.451105] scsi1 : sata_sil
[ 3.451236] ata1: SATA max UDMA/100 mmio m512@0xfe02f000 tf 0xfe02f080 irq 23
[ 3.451294] ata2: SATA max UDMA/100 mmio m512@0xfe02f000 tf 0xfe02f0c0 irq 23
[ 3.451511] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 3.451603] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 3.451711] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 3.451797] ohci_hcd 0000:00:13.0: irq 19, io mem 0xfe02d000
[ 3.508052] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.508115] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.508175] usb usb2: Product: OHCI Host Controller
[ 3.508227] usb usb2: Manufacturer: Linux 2.6.30-2-486 ohci_hcd
[ 3.508280] usb usb2: SerialNumber: 0000:00:13.0
[ 3.508460] usb usb2: configuration #1 chosen from 1 choice
[ 3.508562] hub 2-0:1.0: USB hub found
[ 3.508630] hub 2-0:1.0: 4 ports detected
[ 3.508926] sata_sil 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 3.509411] scsi2 : sata_sil
[ 3.509692] scsi3 : sata_sil
[ 3.509819] ata3: SATA max UDMA/100 mmio m512@0xfe02e000 tf 0xfe02e080 irq 22
[ 3.509877] ata4: SATA max UDMA/100 mmio m512@0xfe02e000 tf 0xfe02e0c0 irq 22
[ 3.510013] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 3.510103] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 3.510200] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 3.510289] ohci_hcd 0000:00:13.1: irq 19, io mem 0xfe02c000
[ 3.568040] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.568102] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.568162] usb usb3: Product: OHCI Host Controller
[ 3.568214] usb usb3: Manufacturer: Linux 2.6.30-2-486 ohci_hcd
[ 3.568267] usb usb3: SerialNumber: 0000:00:13.1
[ 3.568454] usb usb3: configuration #1 chosen from 1 choice
[ 3.568554] hub 3-0:1.0: USB hub found
[ 3.569168] hub 3-0:1.0: 4 ports detected
[ 3.772059] ata1: SATA link down (SStatus 0 SControl 310)
[ 3.828044] ata3: SATA link down (SStatus 0 SControl 310)
[ 4.076021] usb 3-1: new full speed USB device using ohci_hcd and address 2
[ 4.092046] ata2: SATA link down (SStatus 0 SControl 310)
[ 4.286997] usb 3-1: New USB device found, idVendor=04fc, idProduct=0801
[ 4.287055] usb 3-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 4.287110] usb 3-1: Product: USB Multi-Smart Mouse
[ 4.287292] usb 3-1: configuration #1 chosen from 1 choice
[ 4.412041] ata4: SATA link down (SStatus 0 SControl 310)
[ 4.423514] ide-gd driver 1.18
[ 4.423611] hda: max request size: 512KiB
[ 4.434115] ide-cd driver 5.00
[ 4.434490] hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63
[ 4.434931] hda: cache flushes supported
[ 4.435077] hda: hda1 hda2 < hda5 > hda3 hda4
[ 4.456846] usbcore: registered new interface driver hiddev
[ 4.461602] input: USB Multi-Smart Mouse as /devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1:1.0/input/input1
[ 4.461801] generic-usb 0003:04FC:0801.0001: input,hidraw0: USB HID v1.11 Mouse [USB Multi-Smart Mouse] on usb-0000:00:13.1-1/input0
[ 4.461894] usbcore: registered new interface driver usbhid
[ 4.461949] usbhid: v2.6:USB HID core driver
[ 4.475980] ide-cd: hdd: ATAPI 52X DVD-ROM CD-R/RW drive, 2048kB Cache
[ 4.476275] Uniform CD-ROM driver Revision: 3.20
[ 4.964277] kjournald starting. Commit interval 5 seconds
[ 4.964352] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.192878] udev: starting version 150
[ 6.466363] processor ACPI_CPU:00: registered as cooling_device1
[ 6.466431] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 6.490341] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 6.496586] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 6.496659] ACPI: Power Button [PWRF]
[ 6.496801] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 6.496866] ACPI: Power Button [PWRB]
[ 6.508532] parport_pc 00:09: reported by Plug and Play ACPI
[ 6.508674] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 6.616694] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.690642] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 7.225929] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 7.822150] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.910393] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input5
[ 8.530932] Adding 1052216k swap on /dev/hda1. Priority:-1 extents:1 across:1052216k
[ 8.650802] EXT3 FS on hda3, internal journal
[ 8.746130] loop: module loaded
[ 8.801970] fuse init (API version 7.11)
[ 9.191503] kjournald starting. Commit interval 5 seconds
[ 9.191786] EXT3 FS on hda4, internal journal
[ 9.191882] EXT3-fs: mounted filesystem with ordered data mode.
[ 9.603446] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 19.796008] eth0: no IPv6 routers present
++++++++++++++++++++++++++++++++
dmesg with 2.6.32-trunk END

--->hdd: ASUS CB-5216A, ATAPI CD/DVD-ROM drive

--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: E1NhQGJ-0001ad-00.yurii_ptz-bk-ru@foot.mail.ru">http://lists.debian.org/E1NhQGJ-0001ad-00.yurii_ptz-bk-ru@foot.mail.ru