Linux Archive

Linux Archive (http://www.linux-archive.org/)
-   Debian Kernel (http://www.linux-archive.org/debian-kernel/)
-   -   Bug#569524: linux-image-2.6.26-2-686: cannot mount ext2 fs created by 2.6.30 but fsck is clean (http://www.linux-archive.org/debian-kernel/324835-bug-569524-linux-image-2-6-26-2-686-cannot-mount-ext2-fs-created-2-6-30-but-fsck-clean.html)

"David L. Craig" 02-12-2010 04:33 AM

Bug#569524: linux-image-2.6.26-2-686: cannot mount ext2 fs created by 2.6.30 but fsck is clean
 
Package: linux-2.6
Version: 2.6.26-21
Severity: important

Created two USB flash drive ext2 filesystems using Sid,
one in a partition (/dev/sdc1) and one w/o MBR (/dev/sdd).
After falling back to Lenny due to instability, could not
mount either USB filesystem. Running e2fsck found nothing
to fix. Used tune2fs to whittle down possible options
that might be problematic without success. Filesystems
contain large files so large_file cannot be disabled.
Am currently using debugfs to dump big files to other
media, then will try to mount w/o large_file feature.

# cat /etc/fstab
# <special-id> <mount point> <type> <options> <dump> <pass>
#
LABEL=_100125_root / ext3 errors=remount-ro 0 1
LABEL=_100125_var /var ext3 nodev 0 2
LABEL=_100125_usr /usr ext3 nodev 0 2
LABEL=_100125_home /home ext3 nodev,nosuid 0 2
LABEL=_100125_projects /projects ext3 users,rw 0 2
LABEL=_100125_spare1 /spare1 ext3 defaults 0 2
LABEL=_100125_spare2 /spare2 ext3 defaults 0 2
LABEL=NETFINITYSP /_sys_part vfat utf8,noauto 0 0
LABEL=_u0 /_/_ua ext2 users,noamode 0 0
LABEL=_u1 /_/_ub ext2 users,noamode 0 0
proc /proc proc defaults 0 0
/dev/sda2 none swap sw 0 0
/dev/sdb2 none swap sw 0 0
/dev/hda /media/cdrom0 udf,iso9660 users,noauto 0 0
/dev/fd0 /media/floppy0 auto rw,users,noauto 0 0

# mount -vvvv /_/_ua
mount: fstab path: "/etc/fstab"
mount: lock path: "/etc/mtab~"
mount: temp path: "/etc/mtab.tmp"
mount: going to mount LABEL=_u0 by LABEL
mount: spec: "/dev/sdd"
mount: node: "/_/_ua"
mount: types: "ext2"
mount: opts: "users,noamode"
mount: mount(2) syscall: source: "/dev/sdd", target: "/_/_ua", filesystemtype: "ext2", mountflags: -1058209778, data: noamode
mount: wrong fs type, bad option, bad superblock on /dev/sdd,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so

# tune2fs -l /dev/sdc1
tune2fs 1.41.3 (12-Oct-2008)
Filesystem volume name: _u1
Last mounted on: <not available>
Filesystem UUID: 67062ed5-8a8a-4863-84a4-289ee01d7c14
Filesystem magic number: 0xEF53
Filesystem revision #: 1 (dynamic)
Filesystem features: dir_index sparse_super large_file
Filesystem flags: signed_directory_hash
Default mount options: (none)
Filesystem state: clean
Errors behavior: Remount read-only
Filesystem OS type: Linux
Inode count: 981120
Block count: 3921916
Reserved block count: 196095
Free blocks: 480744
Free inodes: 981103
First block: 0
Block size: 4096
Fragment size: 4096
Blocks per group: 32768
Fragments per group: 32768
Inodes per group: 8176
Inode blocks per group: 511
Filesystem created: Sun Feb 1 18:34:34 2009
Last mount time: Wed Jan 27 15:00:04 2010
Last write time: Thu Feb 11 18:23:56 2010
Mount count: 0
Maximum mount count: 26
Last checked: Thu Feb 11 18:23:56 2010
Check interval: 15552000 (6 months)
Next check after: Tue Aug 10 19:23:56 2010
Reserved blocks uid: 0 (user root)
Reserved blocks gid: 0 (group root)
First inode: 11
Inode size: 256
Required extra isize: 28
Desired extra isize: 28
Default directory hash: half_md4
Directory Hash Seed: 4fe7f418-dc9d-416c-a698-a2bdf65bb856

# tune2fs -l /dev/sdd
tune2fs 1.41.3 (12-Oct-2008)
Filesystem volume name: _u0
Last mounted on: <not available>
Filesystem UUID: fda786bf-af75-409a-aebb-381b76cbd205
Filesystem magic number: 0xEF53
Filesystem revision #: 1 (dynamic)
Filesystem features: dir_index sparse_super large_file
Filesystem flags: signed_directory_hash
Default mount options: (none)
Filesystem state: clean
Errors behavior: Remount read-only
Filesystem OS type: Linux
Inode count: 1920
Block count: 3909120
Reserved block count: 195456
Free blocks: 2392084
Free inodes: 1896
First block: 0
Block size: 4096
Fragment size: 4096
Blocks per group: 32768
Fragments per group: 32768
Inodes per group: 16
Inode blocks per group: 1
Filesystem created: Sun Jan 24 14:43:36 2010
Last mount time: Wed Jan 27 15:00:31 2010
Last write time: Thu Feb 11 18:34:11 2010
Mount count: 0
Maximum mount count: 35
Last checked: Thu Feb 11 18:34:11 2010
Check interval: 15552000 (6 months)
Next check after: Tue Aug 10 19:34:11 2010
Reserved blocks uid: 0 (user root)
Reserved blocks gid: 0 (group root)
First inode: 11
Inode size: 256
Required extra isize: 28
Desired extra isize: 28
Default directory hash: half_md4
Directory Hash Seed: df880b56-c940-4911-b226-82ff5b0d463f

# dpkg -l e2fs*
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Cfg-files/Unpacked/Failed-cfg/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
||/ Name Version Description
+++-==========================-==========================-================================================== ==================
ii e2fsck-static 1.41.3-1 statically-linked version of the ext2 filesystem checker
ii e2fslibs 1.41.3-1 ext2 filesystem libraries
ii e2fsprogs 1.41.3-1 ext2/ext3/ext4 file system utilities

-- Package-specific info:
** Version:
Linux version 2.6.26-2-686 (Debian 2.6.26-21) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Sat Dec 26 09:01:51 UTC 2009

** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.26-2-686 root=UUID=eb232d9d-2d9b-4af3-aa01-3c08903cc078 ro acpi_pm_good vga=0x0305

** Not tainted

** Kernel log:
[ 34.331316] usb usb1: SerialNumber: 0000:00:0f.2
[ 34.336542] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 34.558069] hda: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache
[ 34.563013] Uniform CD-ROM driver Revision: 3.20
[ 34.639952] usb 1-1: new full speed USB device using ohci_hcd and address 2
[ 34.878967] usb 1-1: configuration #1 chosen from 1 choice
[ 34.888291] usb 1-1: New USB device found, idVendor=0930, idProduct=6545
[ 34.896292] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 34.909324] usb 1-1: Product: TransMemory
[ 34.914349] usb 1-1: Manufacturer: TOSHIBA
[ 34.919348] usb 1-1: SerialNumber: 001D0F1314D5B8B1431A0161
[ 35.107495] Initializing USB Mass Storage driver...
[ 35.208100] usb 1-2: new full speed USB device using ohci_hcd and address 3
[ 35.429639] usb 1-2: configuration #1 chosen from 1 choice
[ 35.454734] usb 1-2: New USB device found, idVendor=13fe, idProduct=1e23
[ 35.485529] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 35.493540] usb 1-2: Product: STORE N GO
[ 35.498502] usb 1-2: Manufacturer: Verbatim
[ 35.503392] usb 1-2: SerialNumber: 07951A09609608D5
[ 35.513524] scsi1 : SCSI emulation for USB Mass Storage devices
[ 35.515405] scsi2 : SCSI emulation for USB Mass Storage devices
[ 35.521266] usb-storage: device found at 2
[ 35.521276] usb-storage: waiting for device to settle before scanning
[ 35.524609] usbcore: registered new interface driver usb-storage
[ 35.529653] USB Mass Storage support registered.
[ 35.534437] usb-storage: device found at 3
[ 35.534447] usb-storage: waiting for device to settle before scanning
[ 36.150584] Adding 996020k swap on /dev/sda2. Priority:-1 extents:1 across:996020k
[ 36.183999] Adding 996020k swap on /dev/sdb2. Priority:-2 extents:1 across:996020k
[ 36.403656] EXT3 FS on sda5, internal journal
[ 36.898024] loop: module loaded
[ 41.059282] usb-storage: device scan complete
[ 41.091277] usb-storage: device scan complete
[ 41.122990] scsi 1:0:0:0: Direct-Access TOSHIBA TransMemory PMAP PQ: 0 ANSI: 0 CCS
[ 41.145327] scsi 2:0:0:0: Direct-Access Verbatim STORE N GO 5.00 PQ: 0 ANSI: 0 CCS
[ 41.672719] sd 1:0:0:0: [sdc] 31375360 512-byte hardware sectors (16064 MB)
[ 41.683703] sd 1:0:0:0: [sdc] Write Protect is off
[ 41.690724] sd 1:0:0:0: [sdc] Mode Sense: 23 00 00 00
[ 41.690733] sd 1:0:0:0: [sdc] Assuming drive cache: write through
[ 41.720955] sd 1:0:0:0: [sdc] 31375360 512-byte hardware sectors (16064 MB)
[ 41.742254] sd 1:0:0:0: [sdc] Write Protect is off
[ 41.746724] sd 1:0:0:0: [sdc] Mode Sense: 23 00 00 00
[ 41.746732] sd 1:0:0:0: [sdc] Assuming drive cache: write through
[ 41.757034] sdc: sdc1
[ 41.797255] sd 1:0:0:0: [sdc] Attached SCSI removable disk
[ 42.185877] sd 2:0:0:0: [sdd] 31272960 512-byte hardware sectors (16012 MB)
[ 42.195682] sd 2:0:0:0: [sdd] Write Protect is off
[ 42.201813] sd 2:0:0:0: [sdd] Mode Sense: 23 00 00 00
[ 42.201824] sd 2:0:0:0: [sdd] Assuming drive cache: write through
[ 42.224658] sd 2:0:0:0: [sdd] 31272960 512-byte hardware sectors (16012 MB)
[ 42.239563] sd 2:0:0:0: [sdd] Write Protect is off
[ 42.248262] sd 2:0:0:0: [sdd] Mode Sense: 23 00 00 00
[ 42.248262] sd 2:0:0:0: [sdd] Assuming drive cache: write through
[ 42.250401] sdd: unknown partition table
[ 42.351436] sd 2:0:0:0: [sdd] Attached SCSI removable disk
[ 47.038435] kjournald starting. Commit interval 5 seconds
[ 47.047801] EXT3 FS on sdb1, internal journal
[ 47.083806] EXT3-fs: mounted filesystem with ordered data mode.
[ 47.108139] kjournald starting. Commit interval 5 seconds
[ 47.123987] EXT3 FS on sda3, internal journal
[ 47.124004] EXT3-fs: mounted filesystem with ordered data mode.
[ 47.175798] kjournald starting. Commit interval 5 seconds
[ 47.187382] EXT3 FS on sdb3, internal journal
[ 47.205748] EXT3-fs: mounted filesystem with ordered data mode.
[ 47.227842] kjournald starting. Commit interval 5 seconds
[ 47.227842] EXT3 FS on sdb4, internal journal
[ 47.227842] EXT3-fs: mounted filesystem with ordered data mode.
[ 47.320264] kjournald starting. Commit interval 5 seconds
[ 47.356252] EXT3 FS on sda6, internal journal
[ 47.362407] EXT3-fs: mounted filesystem with ordered data mode.
[ 47.396287] kjournald starting. Commit interval 5 seconds
[ 47.404580] EXT3 FS on sda7, internal journal
[ 47.404598] EXT3-fs: mounted filesystem with ordered data mode.
[ 47.516287] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 51.647845] eth0: link up, 100Mbps, full-duplex
[ 54.745504] NET: Registered protocol family 10
[ 54.753265] lo: Disabled Privacy Extensions
[ 61.914883] warning: `ntpd' uses 32-bit capabilities (legacy support in use)
[ 66.262173] eth0: no IPv6 routers present
[ 133.688219] device eth0 entered promiscuous mode
[ 3667.617838] mtrr: Serverworks LE rev < 6 detected. Write-combining disabled.
[ 3667.617855] mtrr: your processor doesn't support write-combining
[77649.064615] device eth0 left promiscuous mode
[83866.135394] mtrr: Serverworks LE rev < 6 detected. Write-combining disabled.
[83866.135410] mtrr: your processor doesn't support write-combining
[132993.245156] device eth0 entered promiscuous mode
[135917.366117] device eth0 left promiscuous mode
[147472.969160] VFS: Can't find an ext2 filesystem on dev sdc.
[148444.871058] mtrr: Serverworks LE rev < 6 detected. Write-combining disabled.
[148444.871058] mtrr: your processor doesn't support write-combining
[163588.739055] kjournald starting. Commit interval 5 seconds
[163588.747388] EXT3 FS on sdb4, internal journal
[163588.747405] EXT3-fs: mounted filesystem with ordered data mode.
[163634.765897] kjournald starting. Commit interval 5 seconds
[163634.765897] EXT3 FS on sda6, internal journal
[163634.780223] EXT3-fs: mounted filesystem with ordered data mode.
[163648.698290] kjournald starting. Commit interval 5 seconds
[163648.716845] EXT3 FS on sda7, internal journal
[163648.720862] EXT3-fs: mounted filesystem with ordered data mode.
[165778.814712] ext3: No journal on filesystem on sdd

** Model information
not available

** Loaded modules:
Module Size Used by
ext2 54504 0
ipv6 235396 22
battery 10180 0
nls_utf8 1760 1
nls_cp437 5568 1
vfat 9152 1
fat 40864 1 vfat
nls_base 6820 4 nls_utf8,nls_cp437,vfat,fat
loop 12748 0
usb_storage 77120 1
ide_cd_mod 27684 0
cdrom 30176 1 ide_cd_mod
ata_generic 4676 0
libata 140448 1 ata_generic
dock 8304 1 libata
parport_pc 22500 0
parport 30988 1 parport_pc
floppy 47844 0
snd_cmipci 28992 0
gameport 10700 1 snd_cmipci
snd_pcm 62660 1 snd_cmipci
snd_page_alloc 7816 1 snd_pcm
snd_opl3_lib 9344 1 snd_cmipci
snd_hwdep 6212 1 snd_opl3_lib
snd_mpu401_uart 6368 1 snd_cmipci
snd_seq_midi 5728 0
snd_seq_midi_event 6432 1 snd_seq_midi
ohci_hcd 18500 0
button 6096 0
snd_rawmidi 18496 2 snd_mpu401_uart,snd_seq_midi
pcspkr 2432 0
snd_seq 41456 2 snd_seq_midi,snd_seq_midi_event
snd_timer 17800 3 snd_pcm,snd_opl3_lib,snd_seq
snd_seq_device 6380 4 snd_opl3_lib,snd_seq_midi,snd_rawmidi,snd_seq
serverworks 4932 0 [permanent]
usbcore 118192 3 usb_storage,ohci_hcd
serio_raw 4740 0
snd 45636 9 snd_cmipci,snd_pcm,snd_opl3_lib,snd_hwdep,snd_mpu4 01_uart,snd_rawmidi,snd_seq,snd_timer,snd_seq_devi ce
psmouse 32336 0
ide_pci_generic 3908 0 [permanent]
i2c_piix4 7216 0
i2c_core 19828 1 i2c_piix4
soundcore 6368 1 snd
ide_core 96168 3 ide_cd_mod,serverworks,ide_pci_generic
pcnet32 27396 0
mii 4896 1 pcnet32
sworks_agp 6720 0
agpgart 28808 1 sworks_agp
evdev 8000 0
ext3 105576 7
jbd 39476 1 ext3
mbcache 7108 2 ext2,ext3
sd_mod 22200 13
thermal 15228 0
processor 32576 1 thermal
fan 4196 0
thermal_sys 10856 3 thermal,processor,fan
aic7xxx 117592 10
scsi_transport_spi 19840 1 aic7xxx
scsi_mod 129548 5 usb_storage,libata,sd_mod,aic7xxx,scsi_transport_s pi

** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback
dns-nameservers 127.0.0.1 192.168.1.186 68.48.0.13 68.87.64.196
dns-search local

# The primary network interface
allow-hotplug eth0
iface eth0 inet static
address 192.168.1.186
netmask 255.255.255.0
network 192.168.1.0
broadcast 192.168.1.255
gateway 192.168.1.1
# dns-* options are implemented by the resolvconf package, if installed
dns-nameservers 127.0.0.1 192.168.1.186 68.48.0.13 68.87.64.196
dns-search local

** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 1000
link/ether 00:06:29:a8:d8:95 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.186/24 brd 192.168.1.255 scope global eth0
inet6 fe80::206:29ff:fea8:d895/64 scope link
valid_lft forever preferred_lft forever

*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo:74779878 184965 0 0 0 0 0 0 74779878 184965 0 0 0 0 0 0
eth0:861849859 816762 0 0 0 0 0 0 62270247 694595 0 0 0 0 0 0

*** Protocol statistics:
Ip:
995991 total packets received
0 forwarded
0 incoming packets discarded
995969 incoming packets delivered
876162 requests sent out
10 dropped because of missing route
Icmp:
1819 ICMP messages received
7 input ICMP message failed.
ICMP input histogram:
destination unreachable: 639
echo requests: 590
echo replies: 590
3024 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 1844
echo request: 590
echo replies: 590
IcmpMsg:
InType0: 590
InType3: 639
InType8: 590
OutType0: 590
OutType3: 1844
OutType8: 590
Tcp:
73669 active connections openings
13050 passive connection openings
723 failed connection attempts
444 connection resets received
1 connections established
906917 segments received
781707 segments send out
772 segments retransmited
0 bad segments received.
34805 resets sent
Udp:
84159 packets received
1939 packets to unknown port received.
0 packet receive errors
90659 packets sent
UdpLite:
TcpExt:
15 resets received for embryonic SYN_RECV sockets
24835 TCP sockets finished time wait in fast timer
17 time wait sockets recycled by time stamp
24 packets rejects in established connections because of timestamp
4024 delayed acks sent
10 delayed acks further delayed because of locked socket
Quick ack mode was activated 11799 times
829 packets directly queued to recvmsg prequeue.
1366182 bytes directly in process context from backlog
800355 bytes directly received in process context from prequeue
506202 packet headers predicted
760 packets header predicted and directly queued to user
100410 acknowledgments not containing data payload received
18414 predicted acknowledgments
70 congestion windows recovered without slow start after partial ack
1 timeouts after reno fast retransmit
1 timeouts after SACK recovery
6 retransmits in slow start
470 other TCP timeouts
11790 DSACKs sent for old packets
33 DSACKs sent for out of order packets
13 DSACKs received
10026 connections reset due to unexpected data
311 connections reset due to early user close
38 connections aborted due to timeout
TCPDSACKIgnoredOld: 6
TCPDSACKIgnoredNoUndo: 2
IpExt:
InBcastPkts: 3746
OutBcastPkts: 2760

*** Device features:
eth0: 0x0
lo: 0x13865

** PCI devices:
00:00.0 Host bridge [0600]: Broadcom CNB20LE Host Bridge [1166:0009] (rev 05)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 48, Cache Line Size: 32 bytes
Kernel modules: sworks-agp

00:00.1 Host bridge [0600]: Broadcom CNB20LE Host Bridge [1166:0009] (rev 05)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 48, Cache Line Size: 32 bytes
Kernel modules: sworks-agp

00:01.0 VGA compatible controller [0300]: S3 Inc. Trio 64 3D [5333:8904] (rev 01) (prog-if 00 [VGA controller])
Subsystem: IBM Integrated Trio3D [1014:00db]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 48 (1000ns min, 63750ns max)
Interrupt: pin A routed to IRQ 255
Region 0: Memory at f8000000 (32-bit, non-prefetchable) [size=64M]
[virtual] Expansion ROM at 30100000 [disabled] [size=64K]
Capabilities: [44] Power Management version 1
Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:02.0 Ethernet controller [0200]: Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE] [1022:2000] (rev 44)
Subsystem: IBM NetFinity 10/100 Fast Ethernet [1014:2000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 48 (6000ns min, 6000ns max)
Interrupt: pin A routed to IRQ 27
Region 0: I/O ports at 2000 [size=32]
Region 1: Memory at febffc00 (32-bit, non-prefetchable) [size=32]
[virtual] Expansion ROM at 30000000 [disabled] [size=1M]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcnet32
Kernel modules: pcnet32

00:0a.0 SCSI storage controller [0100]: Adaptec AHA-2940U/UW/D / AIC-7881U [9004:8178] (rev 01)
Subsystem: Adaptec AHA-2940UW SCSI Host Adapter [9004:7881]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 48 (2000ns min, 2000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 2200 [disabled] [size=256]
Region 1: Memory at febfe000 (32-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at 30110000 [disabled] [size=64K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: aic7xxx
Kernel modules: aic7xxx

00:0f.0 ISA bridge [0601]: Broadcom OSB4 South Bridge [1166:0200] (rev 4f)
Subsystem: Broadcom OSB4 South Bridge [1166:0200]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR+ <PERR- INTx-
Latency: 0
Kernel modules: i2c-piix4

00:0f.1 IDE interface [0101]: Broadcom OSB4 IDE Controller [1166:0211] (prog-if 8a [Master SecP PriP])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
Region 4: I/O ports at 0840 [size=16]
Kernel driver in use: Serverworks_IDE
Kernel modules: serverworks

00:0f.2 USB Controller [0c03]: Broadcom OSB4/CSB5 OHCI USB Controller [1166:0220] (rev 04) (prog-if 10 [OHCI])
Subsystem: Broadcom OSB4/CSB5 OHCI USB Controller [1166:0220]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
Latency: 48 (20000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at ff700000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd

01:05.0 Multimedia audio controller [0401]: C-Media Electronics Inc CM8738 [13f6:0111] (rev 10)
Subsystem: C-Media Electronics Inc CMI8738/C3DX PCI Audio Device [13f6:0111]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 48 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at 4b00 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: C-Media PCI
Kernel modules: snd-cmipci


** USB devices:
Bus 001 Device 003: ID 13fe:1e23 Kingston Technology Company Inc.
Bus 001 Device 002: ID 0930:6545 Toshiba Corp. Kingston DataTraveler 2.0 Stick (4GB) / PNY Attache 4GB Stick
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


-- System Information:
Debian Release: 5.0.4
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)

Kernel: Linux 2.6.26-2-686 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.26-2-686 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo

Versions of packages linux-image-2.6.26-2-686 recommends:
ii libc6-i686 2.7-18lenny2 GNU C Library: Shared libraries [i

Versions of packages linux-image-2.6.26-2-686 suggests:
ii grub-pc [grub] 1.96+20080724-16 GRand Unified Bootloader, version
ii linux-doc-2.6.26 2.6.26-21 Linux kernel specific documentatio

Versions of packages linux-image-2.6.26-2-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)

-- debconf information:
linux-image-2.6.26-2-686/postinst/bootloader-error-2.6.26-2-686:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-2-686/postinst/old-dir-initrd-link-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/overwriting-modules-2.6.26-2-686: true
linux-image-2.6.26-2-686/postinst/bootloader-test-error-2.6.26-2-686:
linux-image-2.6.26-2-686/postinst/depmod-error-2.6.26-2-686: false
linux-image-2.6.26-2-686/preinst/bootloader-initrd-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/abort-overwrite-2.6.26-2-686:
linux-image-2.6.26-2-686/preinst/abort-install-2.6.26-2-686:
linux-image-2.6.26-2-686/postinst/depmod-error-initrd-2.6.26-2-686: false
linux-image-2.6.26-2-686/postinst/create-kimage-link-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/failed-to-move-modules-2.6.26-2-686:
linux-image-2.6.26-2-686/preinst/initrd-2.6.26-2-686:
linux-image-2.6.26-2-686/preinst/lilo-has-ramdisk:
linux-image-2.6.26-2-686/prerm/would-invalidate-boot-loader-2.6.26-2-686: true
linux-image-2.6.26-2-686/postinst/kimage-is-a-directory:
linux-image-2.6.26-2-686/postinst/old-initrd-link-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/elilo-initrd-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/lilo-initrd-2.6.26-2-686: true
linux-image-2.6.26-2-686/prerm/removing-running-kernel-2.6.26-2-686: true
linux-image-2.6.26-2-686/postinst/old-system-map-link-2.6.26-2-686: true
--
May the LORD God bless you exceedingly abundantly!

Dave_Craig________________________________________ ______
"'So the universe is not quite as you thought it was.
You'd better rearrange your beliefs, then.
Because you certainly can't rearrange the universe.'"
__--from_Nightfall_by_Asimov/Silverberg_________________



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org


All times are GMT. The time now is 09:46 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.