FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 11-08-2009, 12:32 PM
Stefan Hett
 
Default Bug#555102: firmware-ralink not working with 3Com 3CRPCIN175 (RT-2600)

Package: firmware-ralink
Version: 0.14+lenny2

I've got an 3Com 3CRPCIN175 installed but when calling iwconfig no
device is listed.

The following dmesg is logged:

[ 14.875549] ACPI: PCI Interrupt 0000:02:0c.0[A] -> GSI 20 (level,
low) -> IRQ 20
[ 14.882920] phy0 -> rt61pci_init_eeprom: Error - Invalid RF chipset
detected.
[ 14.882966] phy0 -> rt2x00lib_probe_dev: Error - Failed to allocate
device.

[ 14.883024] ACPI: PCI interrupt for device 0000:02:0c.0 disabled

lspci reports:
02:0c.0 Unclassified device [0080]: RaLink RT2600 802.11 MIMO

hence I suspect that the firmware-ralink should be the correct driver
for this device and it ought to work with the 3Com card.


I've also tested the latest testing build of firmware-ralink (version
0.18) which reports the same dmesg.


kernel: debian-server 2.6.26-2-686
(also tested with latest testing kernel: 2.6.30-2-686)



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 
Old 11-08-2009, 01:30 PM
Ben Hutchings
 
Default Bug#555102: firmware-ralink not working with 3Com 3CRPCIN175 (RT-2600)

On Sun, 2009-11-08 at 14:32 +0100, Stefan Hett wrote:
> Package: firmware-ralink
> Version: 0.14+lenny2
>
> I've got an 3Com 3CRPCIN175 installed but when calling iwconfig no
> device is listed.
> The following dmesg is logged:
>
> [ 14.875549] ACPI: PCI Interrupt 0000:02:0c.0[A] -> GSI 20 (level,
> low) -> IRQ 20
> [ 14.882920] phy0 -> rt61pci_init_eeprom: Error - Invalid RF chipset
> detected.
> [ 14.882966] phy0 -> rt2x00lib_probe_dev: Error - Failed to allocate
> device.
> [ 14.883024] ACPI: PCI interrupt for device 0000:02:0c.0 disabled
>
> lspci reports:
> 02:0c.0 Unclassified device [0080]: RaLink RT2600 802.11 MIMO

Please send the output of:
lspci -vv -n -d 1814:

> hence I suspect that the firmware-ralink should be the correct driver
> for this device and it ought to work with the 3Com card.

Actually, firmware-ralink contains firmware, not a driver. The driver
(rt61pci) is part of the kernel package.

> I've also tested the latest testing build of firmware-ralink (version
> 0.18) which reports the same dmesg.
>
> kernel: debian-server 2.6.26-2-686
> (also tested with latest testing kernel: 2.6.30-2-686)

Please also test 2.6.31-trunk-686 from experimental (this is meant to be
in unstable now, but there is a delay in adding new binary packages to
unstable).

Ben.

--
Ben Hutchings
The generation of random numbers is too important to be left to chance.
- Robert Coveyou
 

Thread Tools




All times are GMT. The time now is 11:44 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org