FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 11-07-2009, 11:52 PM
Dmitry Semyonov
 
Default Bug#555017: "BUG: unable to handle kernel paging request" (sock_alloc_send_skb)

Package: linux-image-2.6.30-2-686
Version: 2.6.30-8
Severity: important

I get the "unable to handle kernel paging request" several times per week with similar stack trace on my desktop PC. Sometimes it seems to have no significant impact on the system, at other times it kills X server (one of the two running instances).

Some background information, (not very useful but still better than nothing):

The machine worked quite well with Debian Lenny. When I upgraded to Squeeze a few weeks ago, I started to experience complete kernel lock-up issues several times per week, (even when machine was not in use). Then the kernel was upgraded to the current version, and the lock-ups disappeared, (well, almost, because I encountered at least one since the upgrade), but "unable to handle kernel paging request" started to appear instead with about the same frequency, (although they seem to be triggered by some activity). The PC is on 24/7.

memtest86+ does not show any issues, (although I didn't run it longer than 10-20 minutes recently).

My X configuration is unusual -- two X-servers are started on the same graphics card and monitor via two different xdm sessions on two virtual consoles. This is to allow quick switching between active sessions of two different desktop users. Iceweasel is usually running under both users, (one instance with lots of opened tabs, but I have plenty of RAM for such usage). Any of the users starts 'vlc' from time to time to watch multicast video streams announced via SAP protocol, I occasionally compile some software, and there are several jobs/daemons started/running in backgound. The vlc and the compilation seem to be the main triggers of the BUG kernel issues, but unfortunately I have not found exact steps/conditions leading to them.


-- Package-specific info:
** Version:
Linux version 2.6.30-2-686 (Debian 2.6.30-8) (waldi@debian.org) (gcc version 4.3.4 (Debian 4.3.4-3) ) #1 SMP Sat Sep 26 01:16:22 UTC 2009

** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.30-2-686 root=UUID=f55fe101-7570-4ebf-bf0d-368b55c00fd2 ro quiet

** Tainted: G D (128)

** Kernel log:
[ 9.556025] intel8x0: clocking to 48000
[ 10.497274] Adding 1461872k swap on /dev/sda7. Priority:-1 extents:1 across:1461872k
[ 10.610725] EXT3 FS on sda1, internal journal
[ 10.738056] loop: module loaded
[ 10.895483] w83627hf: Found W83637HF chip at 0x290
[ 76.984474] kjournald starting. Commit interval 5 seconds
[ 76.999188] EXT3 FS on sda9, internal journal
[ 76.999196] EXT3-fs: mounted filesystem with ordered data mode.
[ 77.033120] kjournald starting. Commit interval 5 seconds
[ 77.033307] EXT3 FS on sda8, internal journal
[ 77.033314] EXT3-fs: mounted filesystem with ordered data mode.
[ 77.047401] kjournald starting. Commit interval 5 seconds
[ 77.064797] EXT3 FS on sda5, internal journal
[ 77.064803] EXT3-fs: mounted filesystem with ordered data mode.
[ 77.547033] kjournald starting. Commit interval 5 seconds
[ 77.547215] EXT3 FS on sda6, internal journal
[ 77.547223] EXT3-fs: mounted filesystem with ordered data mode.
[ 77.601147] kjournald starting. Commit interval 5 seconds
[ 77.601902] EXT3 FS on hda1, internal journal
[ 77.601908] EXT3-fs: mounted filesystem with ordered data mode.
[ 79.643805] eth1: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 89.832006] eth1: no IPv6 routers present
[81712.959898] BUG: unable to handle kernel paging request at 7f97a380
[81712.959910] IP: [<c028769c>] sock_alloc_send_pskb+0xb3/0x24d
[81712.959927] *pde = 00000000
[81712.959934] Oops: 0002 [#1] SMP
[81712.959940] last sysfs file: /sys/devices/pci0000:00/0000:00:1f.2/host1/uevent
[81712.959946] Modules linked in: w83627hf hwmon_vid eeprom loop snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device i2c_i801 parport_pc pcspkr parport snd shpchp rng_core i2c_core evdev psmouse serio_raw pci_hotplug soundcore snd_page_alloc processor button ext3 jbd mbcache dm_mod ide_cd_mod cdrom sd_mod ide_gd_mod crc_t10dif ide_pci_generic ata_generic usb_storage ata_piix piix 8139cp uhci_hcd 8139too mii ehci_hcd libata ide_core scsi_mod floppy usbcore intel_agp agpgart thermal fan thermal_sys [last unloaded: scsi_wait_scan]
[81712.960010]
[81712.960010] Pid: 3449, comm: Xorg Not tainted (2.6.30-2-686 #1)
[81712.960010] EIP: 0060:[<c028769c>] EFLAGS: 00210202 CPU: 0
[81712.960010] EIP is at sock_alloc_send_pskb+0xb3/0x24d
[81712.960010] EAX: f497a380 EBX: f32ef500 ECX: 00000000 EDX: ffffff97
[81712.960010] ESI: f497a380 EDI: 00000000 EBP: 00000000 ESP: f3525d6c
[81712.960010] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[81712.960010] Process Xorg (pid: 3449, ti=f3524000 task=f64339a0 task.ti=f3524000)
[81712.960010] Stack:
[81712.960010] 000004d0 c3a96114 00000001 00000020 f32ef5dc 00000001 c011c821 00000001
[81712.960010] 000000c1 00000001 c3afd680 c3afd680 f3525e4c 00000020 c0287842 00000040
[81712.960010] f3525df0 c02e47c8 f3525df0 f3525e4c f32ef8b0 f32ef770 f3525e2c f32ef500
[81712.960010] Call Trace:
[81712.960010] [<c011c821>] ? __wake_up_sync_key+0x33/0x49
[81712.960010] [<c0287842>] ? sock_alloc_send_skb+0xc/0xf
[81712.960010] [<c02e47c8>] ? unix_stream_sendmsg+0x127/0x28b
[81712.960010] [<c028495b>] ? __sock_sendmsg+0x43/0x4a
[81712.960010] [<c0284a05>] ? sock_aio_write+0xa3/0xb0
[81712.960010] [<c018d389>] ? do_sync_readv_writev+0xb8/0xf9
[81712.960010] [<c0136bce>] ? autoremove_wake_function+0x0/0x2d
[81712.960010] [<c018d236>] ? rw_copy_check_uvector+0x59/0xc3
[81712.960010] [<c01d781c>] ? security_file_permission+0xc/0xd
[81712.960010] [<c018da38>] ? do_readv_writev+0x81/0xd6
[81712.960010] [<c0284962>] ? sock_aio_write+0x0/0xb0
[81712.960010] [<c01393c9>] ? hrtimer_try_to_cancel+0x5d/0x64
[81712.960010] [<c012a282>] ? do_setitimer+0xaa/0x2b5
[81712.960010] [<c018dac4>] ? vfs_writev+0x37/0x43
[81712.960010] [<c018dba5>] ? sys_writev+0x3c/0x91
[81712.960010] [<c0102ff4>] ? sysenter_do_call+0x12/0x28
[81712.960010] Code: e8 45 3c 00 00 5a ba 97 ff ff ff 85 c0 89 c6 0f 84 9e 01 00 00 83 00 24 08 00 0f 84 60 01 00 00 8b 6c 24 08 31 ff 83 44 24 08 01 <86> b0 00 00 00 8b 86 a4 00 00 00 36 c5 ff 0f 00 00 c1 ed 0c 66
[81712.960010] EIP: [<c028769c>] sock_alloc_send_pskb+0xb3/0x24d SS:ESP 0068:f3525d6c
[81712.960010] CR2: 000000007f97a380
[81712.960409] ---[ end trace ad850edf282cba7c ]---
[92148.530508] fuse[29592]: segfault at b60df008 ip b71d8913 sp bfc35298 error 4 in libc-2.9.so[b7162000+158000]
[238073.924788] BUG: unable to handle kernel paging request at 81530480
[238073.924797] IP: [<c028769c>] sock_alloc_send_pskb+0xb3/0x24d
[238073.924809] *pde = 00000000
[238073.924813] Oops: 0002 [#2] SMP
[238073.924817] last sysfs file: /sys/devices/pci0000:00/0000:00:1f.2/host1/uevent
[238073.924821] Modules linked in: w83627hf hwmon_vid eeprom loop snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device i2c_i801 parport_pc pcspkr parport snd shpchp rng_core i2c_core evdev psmouse serio_raw pci_hotplug soundcore snd_page_alloc processor button ext3 jbd mbcache dm_mod ide_cd_mod cdrom sd_mod ide_gd_mod crc_t10dif ide_pci_generic ata_generic usb_storage ata_piix piix 8139cp uhci_hcd 8139too mii ehci_hcd libata ide_core scsi_mod floppy usbcore intel_agp agpgart thermal fan thermal_sys [last unloaded: scsi_wait_scan]
[238073.924885]
[238073.924891] Pid: 3607, comm: Xorg Tainted: G D (2.6.30-2-686 #1)
[238073.924895] EIP: 0060:[<c028769c>] EFLAGS: 00213202 CPU: 0
[238073.924900] EIP is at sock_alloc_send_pskb+0xb3/0x24d
[238073.924904] EAX: f6530480 EBX: f688b500 ECX: 00000000 EDX: ffffff97
[238073.924907] ESI: f6530480 EDI: 00000000 EBP: 00000000 ESP: f6a25d6c
[238073.924911] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[238073.924915] Process Xorg (pid: 3607, ti=f6a24000 task=f6847610 task.ti=f6a24000)
[238073.924917] Stack:
[238073.924920] 000004d0 00000001 00000001 00000020 f688b5dc c3681390 00000000 00000001
[238073.924929] 00000001 00203046 c36ccd00 c36ccd00 f6a25e4c 00000020 c0287842 00000040
[238073.924939] f6a25df0 c02e47c8 f6a25df0 f6a25e4c f388ceb0 f388cd70 f6a25e2c f688b500
[238073.924949] Call Trace:
[238073.924952] [<c0287842>] ? sock_alloc_send_skb+0xc/0xf
[238073.924958] [<c02e47c8>] ? unix_stream_sendmsg+0x127/0x28b
[238073.924965] [<c028495b>] ? __sock_sendmsg+0x43/0x4a
[238073.924970] [<c0284a05>] ? sock_aio_write+0xa3/0xb0
[238073.924976] [<c018d389>] ? do_sync_readv_writev+0xb8/0xf9
[238073.924983] [<c0136bce>] ? autoremove_wake_function+0x0/0x2d
[238073.924990] [<c018d236>] ? rw_copy_check_uvector+0x59/0xc3
[238073.924995] [<c01d781c>] ? security_file_permission+0xc/0xd
[238073.925001] [<c018da38>] ? do_readv_writev+0x81/0xd6
[238073.925010] [<c0284962>] ? sock_aio_write+0x0/0xb0
[238073.925019] [<c0290cb1>] ? net_rx_action+0x90/0x165
[238073.925028] [<c01d781c>] ? security_file_permission+0xc/0xd
[238073.925034] [<c018dac4>] ? vfs_writev+0x37/0x43
[238073.925039] [<c018dba5>] ? sys_writev+0x3c/0x91
[238073.925043] [<c0102ff4>] ? sysenter_do_call+0x12/0x28
[238073.925050] Code: e8 45 3c 00 00 5a ba 97 ff ff ff 85 c0 89 c6 0f 84 9e 01 00 00 83 00 24 08 00 0f 84 60 01 00 00 8b 6c 24 08 31 ff 83 44 24 08 01 <86> b0 00 00 00 8b 86 a4 00 00 00 36 c5 ff 0f 00 00 c1 ed 0c 66
[238073.925098] EIP: [<c028769c>] sock_alloc_send_pskb+0xb3/0x24d SS:ESP 0068:f6a25d6c
[238073.925105] CR2: 0000000081530480
[238073.925109] ---[ end trace ad850edf282cba7d ]---

** Loaded modules:
Module Size Used by
w83627hf 21128 0
hwmon_vid 2480 1 w83627hf
eeprom 4964 0
loop 13324 0
snd_intel8x0 26584 1
snd_ac97_codec 91264 1 snd_intel8x0
ac97_bus 1456 1 snd_ac97_codec
snd_pcm_oss 32228 0
snd_mixer_oss 12368 1 snd_pcm_oss
snd_pcm 62396 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_seq_midi 5688 0
snd_rawmidi 18596 1 snd_seq_midi
snd_seq_midi_event 6212 1 snd_seq_midi
snd_seq 42436 2 snd_seq_midi,snd_seq_midi_event
snd_timer 17436 2 snd_pcm,snd_seq
snd_seq_device 6136 3 snd_seq_midi,snd_rawmidi,snd_seq
i2c_i801 8580 0
parport_pc 22392 0
pcspkr 2104 0
parport 31144 1 parport_pc
snd 49060 11 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_ oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_ device
shpchp 26648 0
rng_core 3672 0
i2c_core 20844 2 eeprom,i2c_i801
evdev 8028 13
psmouse 37528 0
serio_raw 4560 0
pci_hotplug 24400 1 shpchp
soundcore 6184 1 snd
snd_page_alloc 8180 2 snd_intel8x0,snd_pcm
processor 34560 0
button 5060 0
ext3 107172 6
jbd 41036 1 ext3
mbcache 6924 1 ext3
dm_mod 49992 0
ide_cd_mod 24484 0
cdrom 30316 1 ide_cd_mod
sd_mod 28740 7
ide_gd_mod 19856 2
crc_t10dif 1632 1 sd_mod
ide_pci_generic 3632 0
ata_generic 4340 0
usb_storage 48564 0
ata_piix 20848 6
piix 5680 1
8139cp 17520 0
uhci_hcd 19136 0
8139too 21472 0
mii 4664 2 8139cp,8139too
ehci_hcd 29812 0
libata 151044 2 ata_generic,ata_piix
ide_core 87940 4 ide_cd_mod,ide_gd_mod,ide_pci_generic,piix
scsi_mod 131800 3 sd_mod,usb_storage,libata
floppy 46220 0
usbcore 126052 4 usb_storage,uhci_hcd,ehci_hcd
intel_agp 23052 1
agpgart 30836 1 intel_agp
thermal 12580 0
fan 4044 0
thermal_sys 13140 3 processor,thermal,fan

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface [8086:2570] (rev 02)
Subsystem: Elitegroup Computer Systems Device [1019:1867]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
Capabilities: <access denied>
Kernel driver in use: agpgart-intel

00:01.0 PCI bridge [0604]: Intel Corporation 82865G/PE/P PCI to AGP Controller [8086:2571] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Memory behind bridge: f8000000-f9ffffff
Prefetchable memory behind bridge: f0000000-f7ffffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:1d.0 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 [8086:24d2] (rev 02) (prog-if 00 [UHCI])
Subsystem: Elitegroup Computer Systems Device [1019:1867]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at bc00 [size=32]
Kernel driver in use: uhci_hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 [8086:24d4] (rev 02) (prog-if 00 [UHCI])
Subsystem: Elitegroup Computer Systems Device [1019:1867]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at b000 [size=32]
Kernel driver in use: uhci_hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 [8086:24d7] (rev 02) (prog-if 00 [UHCI])
Subsystem: Elitegroup Computer Systems Device [1019:1867]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at b400 [size=32]
Kernel driver in use: uhci_hcd

00:1d.3 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 [8086:24de] (rev 02) (prog-if 00 [UHCI])
Subsystem: Elitegroup Computer Systems Device [1019:1867]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at b800 [size=32]
Kernel driver in use: uhci_hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller [8086:24dd] (rev 02) (prog-if 20 [EHCI])
Subsystem: Elitegroup Computer Systems Device [1019:1867]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 0: Memory at fa100000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev c2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: fa000000-fa0fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge [8086:24d0] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:1f.1 IDE interface [0101]: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller [8086:24db] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Elitegroup Computer Systems Device [1019:1867]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at f000 [size=16]
Region 5: Memory at a8000000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: PIIX_IDE

00:1f.2 IDE interface [0101]: Intel Corporation 82801EB (ICH5) SATA Controller [8086:24d1] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Elitegroup Computer Systems Device [1019:1867]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at c000 [size=8]
Region 1: I/O ports at c400 [size=4]
Region 2: I/O ports at c800 [size=8]
Region 3: I/O ports at cc00 [size=4]
Region 4: I/O ports at d000 [size=16]
Kernel driver in use: ata_piix

00:1f.3 SMBus [0c05]: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller [8086:24d3] (rev 02)
Subsystem: Elitegroup Computer Systems Device [1019:1867]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 0500 [size=32]
Kernel driver in use: i801_smbus

00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller [8086:24d5] (rev 02)
Subsystem: Elitegroup Computer Systems Device [1019:1867]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at d800 [size=256]
Region 1: I/O ports at dc00 [size=64]
Region 2: Memory at fa101000 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at fa102000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: Intel ICH

01:00.0 VGA compatible controller [0300]: nVidia Corporation NV28 [GeForce4 Ti 4800 SE] [10de:0282] (rev a1) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:80c7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 5
Region 0: Memory at f8000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at f0000000 (32-bit, prefetchable) [size=128M]
[virtual] Expansion ROM at f9000000 [disabled] [size=128K]
Capabilities: <access denied>

02:09.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at a000 [size=256]
Region 1: Memory at fa000000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: 8139too



-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable')
Architecture: i386 (i686)

Kernel: Linux 2.6.30-2-686 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.30-2-686 depends on:
ii debconf [debconf-2.0] 1.5.28 Debian configuration management sy
ii initramfs-tools [linux-initra 0.93.4 tools for generating an initramfs
ii module-init-tools 3.11-1 tools for managing Linux kernel mo

Versions of packages linux-image-2.6.30-2-686 recommends:
ii libc6-i686 2.9-25 GNU C Library: Shared libraries [i

Versions of packages linux-image-2.6.30-2-686 suggests:
ii grub 0.97-59 GRand Unified Bootloader (dummy pa
pn linux-doc-2.6.30 <none> (no description available)

-- debconf information:
linux-image-2.6.30-2-686/preinst/initrd-2.6.30-2-686:
linux-image-2.6.30-2-686/postinst/depmod-error-2.6.30-2-686: false
linux-image-2.6.30-2-686/postinst/bootloader-error-2.6.30-2-686:
linux-image-2.6.30-2-686/prerm/removing-running-kernel-2.6.30-2-686: true
linux-image-2.6.30-2-686/preinst/overwriting-modules-2.6.30-2-686: true
linux-image-2.6.30-2-686/preinst/abort-overwrite-2.6.30-2-686:
linux-image-2.6.30-2-686/postinst/depmod-error-initrd-2.6.30-2-686: false
linux-image-2.6.30-2-686/prerm/would-invalidate-boot-loader-2.6.30-2-686: true
linux-image-2.6.30-2-686/postinst/old-system-map-link-2.6.30-2-686: true
linux-image-2.6.30-2-686/postinst/bootloader-test-error-2.6.30-2-686:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.30-2-686/preinst/failed-to-move-modules-2.6.30-2-686:
linux-image-2.6.30-2-686/preinst/lilo-initrd-2.6.30-2-686: true
linux-image-2.6.30-2-686/postinst/old-dir-initrd-link-2.6.30-2-686: true
linux-image-2.6.30-2-686/preinst/elilo-initrd-2.6.30-2-686: true
linux-image-2.6.30-2-686/postinst/old-initrd-link-2.6.30-2-686: true
linux-image-2.6.30-2-686/preinst/abort-install-2.6.30-2-686:
linux-image-2.6.30-2-686/postinst/kimage-is-a-directory:
linux-image-2.6.30-2-686/preinst/bootloader-initrd-2.6.30-2-686: true
linux-image-2.6.30-2-686/postinst/create-kimage-link-2.6.30-2-686: true
linux-image-2.6.30-2-686/preinst/lilo-has-ramdisk:



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 

Thread Tools




All times are GMT. The time now is 01:26 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org