FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 11-05-2009, 05:23 PM
mase
 
Default Bug#554619: linux-image-2.6.26-2-686: rt2500pci module has unreliable and slow connection speed

Package: linux-image-2.6.26-2-686
Version: 2.6.26-19lenny2
Severity: normal


I get very slow connection speeds with this module around 40 KB/s
what should be 700 - 800 KB/s. I connect through a router with WPA encryption.

At first I had the problem that the wlan card set the
speed of the connection to 1 Mb/s. I solved that problem with the
following entry in /etc/network/interfaces:

allow-hotplug wlan0

iface wlan0 inet static

pre-up iwconfig wlan0 rate 54M
wpa-driver wext
wpa-ssid
wpa-psk ""

network 192.168.178.0
address 192.168.178.200
netmask 255.255.255.0
broadcast 192.168.178.255
gateway 192.168.178.1
dns-nameservers 192.168.178.1

Now it shows 54 MB/s in iwconfig:

wlan0 IEEE 802.11 ESSID:""
Mode:Managed Frequency:2.412 GHz Access Point: 00:
Bit Rate=54 Mb/s Tx-Power=20 dBm
Retry min limit:7 RTS thrff Fragment thr=2352 B
Encryption key:2 [2]
Link Quality=72/100 Signal level=-63 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0

It worked for quite a while however lately I can only download with about 40 KB/s.

The rt2500 module build from the package rt2500-source works without problems.

Thanks for help.


-- Package-specific info:
** Version:
Linux version 2.6.26-2-686 (Debian 2.6.26-19lenny2) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Wed Nov 4 20:45:37 UTC 2009

** Command line:
root=/dev/hda1 ro

** Tainted: P (1)

** Kernel log:
[ 6.356151] input,hidraw1: USB HID v1.11 Mouse [Microsft Microsoft Wireless Desktop Receiver 3.1A] on usb-0000:00:02.0-1
[ 6.361385] input: Logitech USB Gaming Mouse as /class/input/input2
[ 6.376102] input,hidraw2: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:02.0-2
[ 6.381341] hda: max request size: 128KiB
[ 6.381905] hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63
[ 6.382851] hda: cache flushes supported
[ 6.382953] hda:<6>hiddev96hidraw3: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:02.0-2
[ 6.385229] usbcore: registered new interface driver usbhid
[ 6.385281] usbhid: v2.6:USB HID core driver
[ 6.392784] hda1 hda2 < hda5 >
[ 6.414901] hdc: ATAPI 32X CD-ROM CD-R/RW drive, 4096kB Cache
[ 6.415084] Uniform CD-ROM driver Revision: 3.20
[ 6.685061] device-mapper: uevent: version 1.0.3
[ 6.687376] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
[ 6.713660] PM: Starting manual resume from disk
[ 6.779493] kjournald starting. Commit interval 5 seconds
[ 6.779556] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.856162] udevd version 125 started
[ 10.023353] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000
[ 10.023434] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x5040
[ 10.066272] input: Power Button (FF) as /class/input/input3
[ 10.092068] ACPI: Power Button (FF) [PWRF]
[ 10.092210] input: Power Button (CM) as /class/input/input4
[ 10.124089] ACPI: Power Button (CM) [PWRB]
[ 10.935505] Bluetooth: Core ver 2.11
[ 10.964162] NET: Registered protocol family 31
[ 10.964216] Bluetooth: HCI device and connection manager initialized
[ 10.964269] Bluetooth: HCI socket layer initialized
[ 10.999565] Bluetooth: HCI USB driver ver 2.9
[ 11.001174] usbcore: registered new interface driver hci_usb
[ 11.287501] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 11.304025] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.546774] input: PC Speaker as /class/input/input5
[ 11.834807] gameport: EMU10K1 is pci0000:02:08.1/gameport0, io 0xbc00, speed 1193kHz
[ 11.986870] parport_pc 00:06: reported by Plug and Play ACPI
[ 11.986972] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 12.110002] gameport: NS558 PnP Gameport is pnp00:0b/gameport0, io 0x200, speed 917kHz
[ 12.343924] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18
[ 12.343987] ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [LNKB] -> GSI 18 (level, low) -> IRQ 18
[ 12.357655] phy0: Selected rate control algorithm 'pid'
[ 12.893158] Registered led device: rt2500pci-phy0:radio
[ 13.146605] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 17
[ 13.146668] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKC] -> GSI 17 (level, low) -> IRQ 17
[ 13.920339] Adding 2650684k swap on /dev/hda5. Priority:-1 extents:1 across:2650684k
[ 14.392194] EXT3 FS on hda1, internal journal
[ 14.621159] loop: module loaded
[ 14.701973] it87: Found IT8712F chip at 0xd00, revision 7
[ 14.702035] it87: in3 is VCC (+5V)
[ 14.702080] it87: in7 is VCCH (+5V Stand-By)
[ 17.193487] eth0: no link during initialization.
[ 18.096313] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ processors (1 cpu cores) (version 2.20.00)
[ 18.096313] powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x2
[ 18.096313] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0x6
[ 18.096313] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xa
[ 18.096313] powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12
[ 18.820488] wlan0: Initial auth_alg=0
[ 18.820496] wlan0: authenticate with AP 00:
[ 18.823099] wlan0: RX authentication from 00: (alg=0 transaction=2 status=0)
[ 18.823103] wlan0: authenticated
[ 18.823106] wlan0: associate with AP 00:
[ 18.826750] wlan0: RX AssocResp from 00: (capab=0x431 status=0 aid=1)
[ 18.826756] wlan0: associated
[ 18.826765] wlan0: failed to set TX queue parameters for queue 2
[ 18.826767] wlan0: failed to set TX queue parameters for queue 3
[ 18.826771] wlan0: CTS protection enabled (BSSID=00
[ 18.826774] wlan0: switched to short barker preamble (BSSID=00
[ 18.968094] padlock: VIA PadLock not detected.
[ 19.216160] Marking TSC unstable due to: cpufreq changes.
[ 19.249971] lp0: using parport0 (interrupt-driven).
[ 19.279417] ppdev: user-space parallel port driver
[ 19.724027] Clocksource tsc unstable (delta = -272729916 ns)
[ 20.013263] NET: Registered protocol family 10
[ 20.014108] lo: Disabled Privacy Extensions
[ 20.015125] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 23.467378] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 23.467390] vboxdrv: Successfully done.
[ 23.467394] vboxdrv: Found 1 processor cores.
[ 23.467531] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 23.467608] vboxdrv: Successfully loaded version 3.0.10 (interface 0x000e0001).
[ 24.127995] warning: `ntpd' uses 32-bit capabilities (legacy support in use)
[ 26.442538] Bluetooth: L2CAP ver 2.9
[ 26.442600] Bluetooth: L2CAP socket layer initialized
[ 26.491035] Bluetooth: RFCOMM socket layer initialized
[ 26.491117] Bluetooth: RFCOMM TTY layer initialized
[ 26.491170] Bluetooth: RFCOMM ver 1.8
[ 26.653323] Bluetooth: SCO (Voice Link) ver 0.5
[ 26.653401] Bluetooth: SCO socket layer initialized
[ 26.872588] Bluetooth: BNEP (Ethernet Emulation) ver 1.2
[ 26.872668] Bluetooth: BNEP filters: protocol multicast
[ 26.922558] Bridge firewalling registered
[ 26.925151] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
[ 30.840020] wlan0: no IPv6 routers present
[ 31.683203] nvidia: module license 'NVIDIA' taints kernel.
[ 31.948288] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 16
[ 31.948310] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKE] -> GSI 16 (level, low) -> IRQ 16
[ 31.948808] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.20 Thu Jun 25 19:23:24 PDT 2009
[ 32.189679] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[ 32.189702] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[ 32.189743] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[ 92.060853] process `skype' is using obsolete setsockopt SO_BSDCOMPAT

** Loaded modules:
Module Size Used by
nvidia 7081896 24
binfmt_misc 7560 1
bridge 40024 0
bnep 10304 2
sco 8640 2
rfcomm 28272 4
l2cap 17248 16 bnep,rfcomm
vboxnetadp 67944 0
vboxnetflt 73384 0
vboxdrv 103784 1 vboxnetflt
ipv6 235396 20
ppdev 6468 0
lp 8164 0
aes_i586 7744 1
aes_generic 29256 1 aes_i586
powernow_k8 12036 0
cpufreq_powersave 1856 0
cpufreq_ondemand 6476 1
cpufreq_conservative 5960 0
cpufreq_stats 3776 0
freq_table 4224 3 powernow_k8,cpufreq_ondemand,cpufreq_stats
cpufreq_userspace 3172 0
it87 17904 0
hwmon_vid 2720 1 it87
sbp2 18572 0
loop 12748 0
snd_emu10k1_synth 5664 0
snd_emux_synth 27936 1 snd_emu10k1_synth
snd_seq_virmidi 4896 1 snd_emux_synth
snd_seq_midi_emul 5376 1 snd_emux_synth
snd_emu10k1 115200 3 snd_emu10k1_synth
snd_cs4232 11380 0
snd_ac97_codec 88452 1 snd_emu10k1
snd_opl3_lib 9344 1 snd_cs4232
ac97_bus 1728 1 snd_ac97_codec
snd_util_mem 4032 2 snd_emux_synth,snd_emu10k1
arc4 1824 2
snd_cs4231_lib 20512 1 snd_cs4232
snd_hwdep 6212 3 snd_emux_synth,snd_emu10k1,snd_opl3_lib
snd_seq_dummy 2660 0
ecb 2624 2
crypto_blkcipher 15236 1 ecb
snd_pcm_oss 32800 0
snd_mixer_oss 12320 1 snd_pcm_oss
snd_pcm 62660 5 snd_emu10k1,snd_ac97_codec,snd_cs4231_lib,snd_pcm_ oss
snd_page_alloc 7816 3 snd_emu10k1,snd_cs4231_lib,snd_pcm
snd_seq_oss 24992 0
rt2500pci 17152 0
rt2x00pci 7648 1 rt2500pci
rt2x00lib 22432 2 rt2500pci,rt2x00pci
firmware_class 6816 2 snd_emu10k1,rt2x00lib
snd_mpu401 6152 0
snd_mpu401_uart 6368 2 snd_cs4232,snd_mpu401
snd_seq_midi 5728 0
snd_seq_midi_event 6432 3 snd_seq_virmidi,snd_seq_oss,snd_seq_midi
rfkill 5652 1 rt2x00lib
snd_rawmidi 18496 4 snd_seq_virmidi,snd_emu10k1,snd_mpu401_uart,snd_se q_midi
snd_seq 41456 9 snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,s nd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi _event
led_class 3908 1 rt2x00lib
ns558 3712 0
parport_pc 22500 1
parport 30988 3 ppdev,lp,parport_pc
snd_timer 17800 5 snd_emu10k1,snd_opl3_lib,snd_cs4231_lib,snd_pcm,sn d_seq
input_polldev 3752 1 rt2x00lib
mac80211 139776 2 rt2x00pci,rt2x00lib
snd_seq_device 6380 9 snd_emu10k1_synth,snd_emux_synth,snd_emu10k1,snd_o pl3_lib,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd _rawmidi,snd_seq
emu10k1_gp 2688 0
snd 45636 21 snd_emux_synth,snd_seq_virmidi,snd_emu10k1,snd_cs4 232,snd_ac97_codec,snd_opl3_lib,snd_cs4231_lib,snd _hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_o ss,snd_mpu401,snd_mpu401_uart,snd_rawmidi,snd_seq, snd_timer,snd_seq_device
cfg80211 21608 2 rt2x00lib,mac80211
gameport 10700 4 ns558,emu10k1_gp
soundcore 6368 1 snd
eeprom_93cx6 2144 1 rt2500pci
serio_raw 4740 0
pcspkr 2432 0
psmouse 32336 0
k8temp 4064 0
shpchp 25528 0
pci_hotplug 23460 1 shpchp
hci_usb 12252 2
bluetooth 44996 9 bnep,sco,rfcomm,l2cap,hci_usb
button 6096 0
i2c_nforce2 5536 0
i2c_core 19828 2 nvidia,i2c_nforce2
evdev 8000 4
ext3 105576 1
jbd 39476 1 ext3
mbcache 7108 1 ext3
dm_mirror 15136 0
dm_log 8452 1 dm_mirror
dm_snapshot 14340 0
dm_mod 46216 3 dm_mirror,dm_log,dm_snapshot
ide_cd_mod 27684 1
cdrom 30176 1 ide_cd_mod
ide_disk 10496 3
usbhid 35904 0
hid 33184 1 usbhid
ff_memless 4392 1 usbhid
ide_pci_generic 3908 0 [permanent]
amd74xx 7752 0 [permanent]
ide_core 96168 4 ide_cd_mod,ide_disk,ide_pci_generic,amd74xx
floppy 47716 0
ohci1394 24976 0
ieee1394 75832 2 sbp2,ohci1394
ata_generic 4676 0
sata_nv 19848 0
libata 140448 2 ata_generic,sata_nv
scsi_mod 129548 2 sbp2,libata
dock 8304 1 libata
forcedeth 45072 0
ehci_hcd 28428 0
ohci_hcd 18532 0
usbcore 118192 5 hci_usb,usbhid,ehci_hcd,ohci_hcd
amd64_agp 8772 1
agpgart 28808 2 nvidia,amd64_agp
thermal 15228 0
processor 32576 2 powernow_k8,thermal
fan 4196 0
thermal_sys 10856 3 thermal,processor,fan

** PCI devices:
00:00.0 Host bridge [0600]: nVidia Corporation nForce3 250Gb Host Bridge [10de:00e1] (rev a1)
Subsystem: ASUSTeK Computer Inc. K8N-E [1043:813f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Capabilities: <access denied>
Kernel driver in use: agpgart-amd64
Kernel modules: amd64-agp

00:01.0 ISA bridge [0601]: nVidia Corporation nForce3 250Gb LPC Bridge [10de:00e0] (rev a2)
Subsystem: ASUSTeK Computer Inc. K8N-E [1043:813f]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:01.1 SMBus [0c05]: nVidia Corporation nForce 250Gb PCI System Management [10de:00e4] (rev a1)
Subsystem: ASUSTeK Computer Inc. K8N-E [1043:813f]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 0
Region 0: I/O ports at 5080 [size=32]
Region 4: I/O ports at 5000 [size=64]
Region 5: I/O ports at 5040 [size=64]
Capabilities: <access denied>
Kernel driver in use: nForce2_smbus
Kernel modules: i2c-nforce2

00:02.0 USB Controller [0c03]: nVidia Corporation CK8S USB Controller [10de:00e7] (rev a1) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. K8N-E [1043:813f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 22
Region 0: Memory at febfd000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd

00:02.1 USB Controller [0c03]: nVidia Corporation CK8S USB Controller [10de:00e7] (rev a1) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. K8N-E [1043:813f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 21
Region 0: Memory at febfe000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd

00:02.2 USB Controller [0c03]: nVidia Corporation nForce3 EHCI USB 2.0 Controller [10de:00e8] (rev a2) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. K8N-E [1043:813f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin C routed to IRQ 20
Region 0: Memory at febffc00 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd

00:05.0 Bridge [0680]: nVidia Corporation CK8S Ethernet Controller [10de:00df] (rev a2)
Subsystem: ASUSTeK Computer Inc. K8N-E [1043:80a7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 22
Region 0: Memory at febfc000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at ec00 [size=8]
Capabilities: <access denied>
Kernel driver in use: forcedeth
Kernel modules: forcedeth

00:08.0 IDE interface [0101]: nVidia Corporation CK8S Parallel ATA Controller (v2.5) [10de:00e5] (rev a2) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. K8N-E [1043:813f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
Region 4: I/O ports at ffa0 [size=16]
Capabilities: <access denied>
Kernel driver in use: AMD_IDE
Kernel modules: amd74xx

00:0a.0 IDE interface [0101]: nVidia Corporation nForce3 Serial ATA Controller [10de:00e3] (rev a2) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. K8N-E [1043:813f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at 09f0 [size=8]
Region 1: I/O ports at 0bf0 [size=4]
Region 2: I/O ports at 0970 [size=8]
Region 3: I/O ports at 0b70 [size=4]
Region 4: I/O ports at c800 [size=16]
Region 5: I/O ports at c400 [size=128]
Capabilities: <access denied>
Kernel driver in use: sata_nv
Kernel modules: sata_nv

00:0b.0 PCI bridge [0604]: nVidia Corporation nForce3 250Gb AGP Host to PCI Bridge [10de:00e2] (rev a2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16
Bus: primary=00, secondary=01, subordinate=01, sec-latency=10
Memory behind bridge: fc900000-fe9fffff
Prefetchable memory behind bridge: cc800000-ec7fffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Kernel modules: shpchp

00:0e.0 PCI bridge [0604]: nVidia Corporation nForce3 250Gb PCI-to-PCI Bridge [10de:00ed] (rev a2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=128
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fea00000-feafffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Kernel modules: shpchp

00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>

00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: k8temp
Kernel modules: k8temp

01:00.0 VGA compatible controller [0300]: nVidia Corporation NV36.2 [GeForce FX 5700] [10de:0342] (rev a1) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:8158]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 248 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (32-bit, prefetchable) [size=256M]
[virtual] Expansion ROM at fe9e0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nvidia
Kernel modules: nvidiafb, nvidia

02:07.0 Network controller [0280]: RaLink RT2500 802.11g Cardbus/mini-PCI [1814:0201] (rev 01)
Subsystem: Micro-Star International Co., Ltd. Device [1462:6834]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at feafe000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: rt2500pci
Kernel modules: rt2500pci

02:08.0 Multimedia audio controller [0401]: Creative Labs SB Audigy [1102:0004] (rev 03)
Subsystem: Creative Labs SB0090 Audigy Player/OEM [1102:0053]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at b800 [size=32]
Capabilities: <access denied>
Kernel driver in use: EMU10K1_Audigy
Kernel modules: snd-emu10k1

02:08.1 Input device controller [0980]: Creative Labs SB Audigy Game Port [1102:7003] (rev 03)
Subsystem: Creative Labs SB Audigy MIDI/Game Port [1102:0040]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Region 0: I/O ports at bc00 [size=8]
Capabilities: <access denied>
Kernel driver in use: Emu10k1_gameport
Kernel modules: emu10k1-gp

02:08.2 FireWire (IEEE 1394) [0c00]: Creative Labs SB Audigy FireWire Port [1102:4001] (prog-if 10 [OHCI])
Subsystem: Creative Labs SB Audigy FireWire Port [1102:0010]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at feafd800 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at feaf8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: ohci1394
Kernel modules: ohci1394



-- System Information:
Debian Release: 5.0.3
APT prefers stable
APT policy: (900, 'stable')
Architecture: i386 (i686)

Kernel: Linux 2.6.26-2-686 (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.26-2-686 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-in 0.93.2~bpo50+2 tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo

Versions of packages linux-image-2.6.26-2-686 recommends:
ii libc6-i686 2.7-18 GNU C Library: Shared libraries [i

Versions of packages linux-image-2.6.26-2-686 suggests:
ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)

-- debconf information:
linux-image-2.6.26-2-686/postinst/bootloader-error-2.6.26-2-686:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-2-686/postinst/old-dir-initrd-link-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/overwriting-modules-2.6.26-2-686: true
linux-image-2.6.26-2-686/postinst/bootloader-test-error-2.6.26-2-686:
linux-image-2.6.26-2-686/postinst/depmod-error-2.6.26-2-686: false
linux-image-2.6.26-2-686/preinst/bootloader-initrd-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/abort-overwrite-2.6.26-2-686:
linux-image-2.6.26-2-686/preinst/abort-install-2.6.26-2-686:
linux-image-2.6.26-2-686/postinst/depmod-error-initrd-2.6.26-2-686: false
linux-image-2.6.26-2-686/postinst/create-kimage-link-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/failed-to-move-modules-2.6.26-2-686:
linux-image-2.6.26-2-686/preinst/initrd-2.6.26-2-686:
linux-image-2.6.26-2-686/preinst/lilo-has-ramdisk:
linux-image-2.6.26-2-686/prerm/would-invalidate-boot-loader-2.6.26-2-686: true
linux-image-2.6.26-2-686/postinst/kimage-is-a-directory:
linux-image-2.6.26-2-686/postinst/old-initrd-link-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/elilo-initrd-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/lilo-initrd-2.6.26-2-686: true
linux-image-2.6.26-2-686/prerm/removing-running-kernel-2.6.26-2-686: true
linux-image-2.6.26-2-686/postinst/old-system-map-link-2.6.26-2-686: true



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 
Old 02-25-2010, 08:47 PM
Moritz Muehlenhoff
 
Default Bug#554619: linux-image-2.6.26-2-686: rt2500pci module has unreliable and slow connection speed

tags 554619 moreinfo
thanks

On Thu, Nov 05, 2009 at 07:23:42PM +0100, mase wrote:
> Package: linux-image-2.6.26-2-686
> Version: 2.6.26-19lenny2
> Severity: normal
>
>
> I get very slow connection speeds with this module around 40 KB/s
> what should be 700 - 800 KB/s. I connect through a router with WPA encryption.

Hi,
The next release of Debian (6.0, code name Squeeze) will be based
on 2.6.32. Please test the current 2.6.32 from unstable/testing and tell
us whether the problem persists. If so, we should report it upstream
to the kernel.org developers.

The 2.6.32 kernel is available from packages.debian.org and can
be installed in both Debian stable, testing and unstable
installations.

Thanks,
Moritz



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20100225214754.GA5799@galadriel.inutil.org">http://lists.debian.org/20100225214754.GA5799@galadriel.inutil.org
 

Thread Tools




All times are GMT. The time now is 12:50 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org