FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 03-19-2009, 07:32 AM
Rik Theys
 
Default Bug#520379: linux-image-2.6.26-bpo.1-amd64: Lots of kernel messages about lockd and the number of nfsd threads

Package: linux-image-2.6.26-bpo.1-amd64
Version: 2.6.26-13~bpo40+1
Severity: normal

Hi,

I'm running the 2.6.26 kernel from backports on etch. The server in
question is an NFS file server. During periods we're getting a lot of

lockd: too many open connections, consider increasing the number of
nfsd threads

messages from the kernel. I've tried increasing the number of nfsd
threads (from 128 to 256) but the messages still appear. The default
number of nfsd threads is 8, so 128 (and 256) is a serious increase?

When I googled for the string, I found a red hat bug report [1] that seems
similar. It seems to conclude that the number of socket connections to
lockd is capped at 80. I've tried to decrease the number of nfsd threads
to 64 (to get below 80) but it doesn't help. Is the nfsd process talking
to lockd or are the network clients directly talking to lockd?

When I look at /proc/net/rpc/nfsd, the th line currently says:

th 64 2 8262.856 627.240 81.384 21.208 6.680 4.968 3.188 0.476 31.744
0.000

which I believe means the number of nfsd threads were never used 100%
(31.744 seconds at 80-90% capacity)?

I tried to determine the number of active connections by looking for the
port used by the lock manager using rpcinfo and then using netstat -an
to see the connections to/from that port, but the number of connections
is zero right now (but there are no messages being logged right now).

Any ideas on how to further debug this? The server in question is one of
our most loaded NFS servers and I haven't been able to reproduce this
on a test server.

I noticed that a snapshot kernel (2.6.26-14) on
kernel-archive.buildserver.net mentions "Backport upstream patches to
fix NFS "task blocked for more than 120 seconds" issue" in the
changelog. Any chance this will also fix the lockd problem? Rebooting
the server to try a bunch of kernels is not really an option, but one
reboot should be possible in about a week.

Regards,

Rik


[1] https://bugzilla.redhat.com/show_bug.cgi?id=457405

-- Package-specific info:
** Version:
Linux version 2.6.26-bpo.1-amd64 (Debian 2.6.26-13~bpo40+1) (nobse@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Mon Jan 12 12:26:02 UTC 2009

** Command line:
root=/dev/mapper/vglocal-root ro

** Not tainted

** Kernel log:
[2582760.434812] lockd: too many open connections, consider increasing the number of nfsd threads
[2582768.449568] lockd: too many open connections, consider increasing the number of nfsd threads
[2582769.459376] lockd: too many open connections, consider increasing the number of nfsd threads
[2582877.051217] lockd: too many open connections, consider increasing the number of nfsd threads
[2582878.588940] lockd: too many open connections, consider increasing the number of nfsd threads
[2582882.333982] lockd: too many open connections, consider increasing the number of nfsd threads
[2582890.236297] lockd: too many open connections, consider increasing the number of nfsd threads
[2582900.004939] lockd: too many open connections, consider increasing the number of nfsd threads
[2582904.024497] lockd: too many open connections, consider increasing the number of nfsd threads
[2582906.807805] lockd: too many open connections, consider increasing the number of nfsd threads
[2582932.014436] lockd: too many open connections, consider increasing the number of nfsd threads
[2582938.092144] lockd: too many open connections, consider increasing the number of nfsd threads
[2582939.113474] lockd: too many open connections, consider increasing the number of nfsd threads
[2582942.972879] lockd: too many open connections, consider increasing the number of nfsd threads
[2582948.205182] lockd: too many open connections, consider increasing the number of nfsd threads
[2582994.071922] lockd: too many open connections, consider increasing the number of nfsd threads
[2583015.029338] lockd: too many open connections, consider increasing the number of nfsd threads
[2583018.901170] lockd: too many open connections, consider increasing the number of nfsd threads
[2583030.807122] lockd: too many open connections, consider increasing the number of nfsd threads
[2583031.361386] lockd: too many open connections, consider increasing the number of nfsd threads
[2583047.722268] lockd: too many open connections, consider increasing the number of nfsd threads
[2583053.155262] lockd: too many open connections, consider increasing the number of nfsd threads
[2583061.534054] lockd: too many open connections, consider increasing the number of nfsd threads
[2583063.947798] lockd: too many open connections, consider increasing the number of nfsd threads
[2583066.670525] lockd: too many open connections, consider increasing the number of nfsd threads
[2583071.069884] lockd: too many open connections, consider increasing the number of nfsd threads
[2583080.081877] lockd: too many open connections, consider increasing the number of nfsd threads
[2583082.845632] lockd: too many open connections, consider increasing the number of nfsd threads
[2583083.669690] lockd: too many open connections, consider increasing the number of nfsd threads
[2583281.047138] lockd: too many open connections, consider increasing the number of nfsd threads
[2583310.628560] lockd: too many open connections, consider increasing the number of nfsd threads
[2583313.894882] lockd: too many open connections, consider increasing the number of nfsd threads
[2583314.512691] lockd: too many open connections, consider increasing the number of nfsd threads
[2583331.011280] lockd: too many open connections, consider increasing the number of nfsd threads
[2583334.211369] lockd: too many open connections, consider increasing the number of nfsd threads
[2583595.713928] lockd: too many open connections, consider increasing the number of nfsd threads
[2583600.283073] lockd: too many open connections, consider increasing the number of nfsd threads
[2584211.357678] lockd: too many open connections, consider increasing the number of nfsd threads
[2584222.473787] lockd: too many open connections, consider increasing the number of nfsd threads
[2584238.064195] lockd: too many open connections, consider increasing the number of nfsd threads
[2584240.988685] lockd: too many open connections, consider increasing the number of nfsd threads
[2584241.200588] lockd: too many open connections, consider increasing the number of nfsd threads
[2584242.573402] lockd: too many open connections, consider increasing the number of nfsd threads
[2584262.185492] lockd: too many open connections, consider increasing the number of nfsd threads
[2584263.796336] lockd: too many open connections, consider increasing the number of nfsd threads
[2584266.031232] lockd: too many open connections, consider increasing the number of nfsd threads
[2584266.401800] lockd: too many open connections, consider increasing the number of nfsd threads
[2584266.424184] lockd: too many open connections, consider increasing the number of nfsd threads
[2584268.242767] lockd: too many open connections, consider increasing the number of nfsd threads
[2584274.374176] lockd: too many open connections, consider increasing the number of nfsd threads
[2584274.469827] lockd: too many open connections, consider increasing the number of nfsd threads
[2584277.881359] lockd: too many open connections, consider increasing the number of nfsd threads
[2584279.216922] lockd: too many open connections, consider increasing the number of nfsd threads
[2584289.732028] lockd: too many open connections, consider increasing the number of nfsd threads
[2584290.478001] lockd: too many open connections, consider increasing the number of nfsd threads
[2584291.524155] lockd: too many open connections, consider increasing the number of nfsd threads
[2584294.822405] lockd: too many open connections, consider increasing the number of nfsd threads
[2584301.852355] lockd: too many open connections, consider increasing the number of nfsd threads
[2584306.622106] lockd: too many open connections, consider increasing the number of nfsd threads
[2584335.719389] lockd: too many open connections, consider increasing the number of nfsd threads
[2584336.844967] lockd: too many open connections, consider increasing the number of nfsd threads
[2584345.240115] lockd: too many open connections, consider increasing the number of nfsd threads
[2584382.418131] lockd: too many open connections, consider increasing the number of nfsd threads
[2584387.218386] lockd: too many open connections, consider increasing the number of nfsd threads
[2584388.832048] lockd: too many open connections, consider increasing the number of nfsd threads
[2584390.018393] lockd: too many open connections, consider increasing the number of nfsd threads
[2584392.184922] lockd: too many open connections, consider increasing the number of nfsd threads
[2584396.728784] lockd: too many open connections, consider increasing the number of nfsd threads
[2584401.368312] lockd: too many open connections, consider increasing the number of nfsd threads
[2584414.288214] lockd: too many open connections, consider increasing the number of nfsd threads
[2584429.794763] lockd: too many open connections, consider increasing the number of nfsd threads
[2584430.659079] lockd: too many open connections, consider increasing the number of nfsd threads
[2584439.688244] lockd: too many open connections, consider increasing the number of nfsd threads
[2584441.326546] lockd: too many open connections, consider increasing the number of nfsd threads
[2584460.073875] lockd: too many open connections, consider increasing the number of nfsd threads
[2584460.193177] lockd: too many open connections, consider increasing the number of nfsd threads
[2584467.055222] lockd: too many open connections, consider increasing the number of nfsd threads
[2584476.546188] lockd: too many open connections, consider increasing the number of nfsd threads
[2584495.295627] lockd: too many open connections, consider increasing the number of nfsd threads
[2584496.679387] lockd: too many open connections, consider increasing the number of nfsd threads
[2584501.675201] lockd: too many open connections, consider increasing the number of nfsd threads
[2584504.956484] lockd: too many open connections, consider increasing the number of nfsd threads
[2584510.930668] lockd: too many open connections, consider increasing the number of nfsd threads
[2584546.700825] lockd: too many open connections, consider increasing the number of nfsd threads
[2584552.536331] lockd: too many open connections, consider increasing the number of nfsd threads
[2584572.245927] lockd: too many open connections, consider increasing the number of nfsd threads
[2584578.824374] lockd: too many open connections, consider increasing the number of nfsd threads
[2584584.863567] lockd: too many open connections, consider increasing the number of nfsd threads
[2584587.909908] lockd: too many open connections, consider increasing the number of nfsd threads
[2584596.774547] lockd: too many open connections, consider increasing the number of nfsd threads
[2584607.859744] lockd: too many open connections, consider increasing the number of nfsd threads
[2584610.341836] lockd: too many open connections, consider increasing the number of nfsd threads
[2584673.663496] lockd: too many open connections, consider increasing the number of nfsd threads
[2584695.557197] lockd: too many open connections, consider increasing the number of nfsd threads
[2584697.727536] lockd: too many open connections, consider increasing the number of nfsd threads
[2584697.827921] lockd: too many open connections, consider increasing the number of nfsd threads
[2584703.070963] lockd: too many open connections, consider increasing the number of nfsd threads
[2584717.321271] lockd: too many open connections, consider increasing the number of nfsd threads
[2586694.147889] lockd: too many open connections, consider increasing the number of nfsd threads
[2586694.317663] lockd: too many open connections, consider increasing the number of nfsd threads

** Loaded modules:
Module Size Used by
nfs 252080 1
ipv6 289224 54
nfsd 249256 73
lockd 69072 2 nfs,nfsd
nfs_acl 7680 2 nfs,nfsd
auth_rpcgss 47904 1 nfsd
sunrpc 198120 433 nfs,nfsd,lockd,nfs_acl,auth_rpcgss
exportfs 8832 1 nfsd
ppdev 11912 0
parport_pc 31400 0
lp 14852 0
parport 42160 3 ppdev,parport_pc,lp
ac 9608 0
battery 17032 0
autofs4 24328 31
quota_v2 13056 10
xfs 476712 2
powernow_k8 17284 2
cpufreq_conservative 12040 0
cpufreq_stats 9248 0
cpufreq_ondemand 12048 2
freq_table 9472 3 powernow_k8,cpufreq_stats,cpufreq_ondemand
cpufreq_powersave 6528 0
cpufreq_userspace 8708 0
loop 19724 0
floppy 61928 0
pcspkr 7296 0
snd_pcm 82184 0
snd_timer 26128 1 snd_pcm
snd 63944 2 snd_pcm,snd_timer
soundcore 12192 1 snd
psmouse 42524 0
snd_page_alloc 13328 1 snd_pcm
serio_raw 10116 0
k8temp 9472 0
hpilo 12304 0
amd_rng 7176 0
rng_core 9224 1 amd_rng
hpwdt 11904 0
i2c_amd756 10884 0
i2c_core 28192 1 i2c_amd756
shpchp 34464 0
pci_hotplug 32312 1 shpchp
container 8448 0
button 11808 0
evdev 14464 0
dm_round_robin 7424 1
dm_multipath 21648 2 dm_round_robin
ext3 125584 14
jbd 51496 1 ext3
mbcache 12932 1 ext3
dm_mirror 20864 0
dm_log 14084 1 dm_mirror
dm_snapshot 19656 0
dm_mod 59248 58 dm_multipath,dm_mirror,dm_log,dm_snapshot
ide_generic 7296 0 [permanent]
ide_cd_mod 36744 0
cdrom 38184 1 ide_cd_mod
sd_mod 29632 10
ata_generic 10244 0
libata 166624 1 ata_generic
dock 14368 1 libata
e1000 117696 0
lpfc 244084 20
scsi_transport_fc 50052 1 lpfc
scsi_tgt 17872 1 scsi_transport_fc
cciss 62600 3
scsi_mod 161400 6 sd_mod,libata,lpfc,scsi_transport_fc,scsi_tgt,ccis s
amd74xx 13704 0 [permanent]
tg3 98052 0
ide_core 128668 3 ide_generic,ide_cd_mod,amd74xx
ohci_hcd 25348 0
thermal 22816 0
processor 42816 2 powernow_k8,thermal
fan 9480 0
thermal_sys 17984 3 thermal,processor,fan

** PCI devices:
00:03.0 PCI bridge [0604]: Advanced Micro Devices [AMD] AMD-8111 PCI [1022:7460] (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 00004000-00004fff
Memory behind bridge: f5f00000-f7bfffff
Prefetchable memory behind bridge: f5800000-f58fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
Capabilities: <access denied>

00:04.0 ISA bridge [0601]: Advanced Micro Devices [AMD] AMD-8111 LPC [1022:7468] (rev 05)
Subsystem: Compaq Computer Corporation Unknown device [0e11:3203]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0

00:04.1 IDE interface [0101]: Advanced Micro Devices [AMD] AMD-8111 IDE [1022:7469] (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: Compaq Computer Corporation Unknown device [0e11:3204]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
Region 4: I/O ports at 2000 [size=16]

00:04.3 Bridge [0680]: Advanced Micro Devices [AMD] AMD-8111 ACPI [1022:746b] (rev 05)
Subsystem: Compaq Computer Corporation Unknown device [0e11:3205]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:07.0 PCI bridge [0604]: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge [1022:7450] (rev 12) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
I/O behind bridge: 00005000-00005fff
Memory behind bridge: f7c00000-f7cfffff
Prefetchable memory behind bridge: 00000000f5900000-00000000f59fffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>

00:07.1 PIC [0800]: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC [1022:7451] (rev 01) (prog-if 10 [IO-APIC])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0

00:08.0 PCI bridge [0604]: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge [1022:7450] (rev 12) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
Memory behind bridge: f7d00000-f7dfffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>

00:08.1 PIC [0800]: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC [1022:7451] (rev 01) (prog-if 10 [IO-APIC])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0

00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Capabilities: <access denied>

00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:19.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Capabilities: <access denied>

00:19.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:19.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:19.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

01:00.0 USB Controller [0c03]: Advanced Micro Devices [AMD] AMD-8111 USB [1022:7464] (rev 0b) (prog-if 10 [OHCI])
Subsystem: Compaq Computer Corporation Unknown device [0e11:3202]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (20000ns max)
Interrupt: pin D routed to IRQ 19
Region 0: Memory at f7bf0000 (32-bit, non-prefetchable) [size=4K]

01:00.1 USB Controller [0c03]: Advanced Micro Devices [AMD] AMD-8111 USB [1022:7464] (rev 0b) (prog-if 10 [OHCI])
Subsystem: Compaq Computer Corporation Unknown device [0e11:3202]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (20000ns max)
Interrupt: pin D routed to IRQ 19
Region 0: Memory at f7be0000 (32-bit, non-prefetchable) [size=4K]

01:02.0 System peripheral [0880]: Compaq Computer Corporation Integrated Lights Out Controller [0e11:b203] (rev 01)
Subsystem: Compaq Computer Corporation Unknown device [0e11:b206]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 7
Region 0: I/O ports at 4800 [size=256]
Region 1: Memory at f7bb0000 (32-bit, non-prefetchable) [size=512]
Capabilities: <access denied>

01:02.2 System peripheral [0880]: Compaq Computer Corporation Integrated Lights Out Processor [0e11:b204] (rev 01)
Subsystem: Compaq Computer Corporation Unknown device [0e11:b206]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping+ SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 4000 [size=256]
Region 1: Memory at f7ba0000 (32-bit, non-prefetchable) [size=2K]
Region 2: Memory at f7b90000 (32-bit, non-prefetchable) [size=8K]
Region 3: Memory at f7b00000 (32-bit, non-prefetchable) [size=512K]
[virtual] Expansion ROM at f5820000 [disabled] [size=64K]
Capabilities: <access denied>

01:03.0 VGA compatible controller [0300]: ATI Technologies Inc Rage XL [1002:4752] (rev 27) (prog-if 00 [VGA])
Subsystem: Compaq Computer Corporation Proliant Rage XL [0e11:001e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min), Cache Line Size: 64 bytes
Region 0: Memory at f6000000 (32-bit, non-prefetchable) [size=16M]
Region 1: I/O ports at 4400 [size=256]
Region 2: Memory at f5ff0000 (32-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at f5800000 [disabled] [size=128K]
Capabilities: <access denied>

02:04.0 RAID bus controller [0104]: Compaq Computer Corporation Smart Array 64xx [0e11:0046] (rev 01)
Subsystem: Compaq Computer Corporation Unknown device [0e11:4091]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 24
Region 0: Memory at f7cf0000 (64-bit, non-prefetchable) [size=8K]
Region 2: I/O ports at 5000 [size=256]
Region 3: Memory at f7c80000 (64-bit, non-prefetchable) [size=256K]
[virtual] Expansion ROM at f5900000 [disabled] [size=256K]
Capabilities: <access denied>

03:06.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet [14e4:1648] (rev 10)
Subsystem: Compaq Computer Corporation NC7782 Gigabit Server Adapter (PCI-X, 10,100,1000-T) [0e11:00d0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (16000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 28
Region 0: Memory at f7df0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>

03:06.1 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet [14e4:1648] (rev 10)
Subsystem: Compaq Computer Corporation NC7782 Gigabit Server Adapter (PCI-X, 10,100,1000-T) [0e11:00d0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (16000ns min), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 29
Region 0: Memory at f7de0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>

04:09.0 PCI bridge [0604]: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge [1022:7450] (rev 12) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=04, secondary=05, subordinate=06, sec-latency=64
I/O behind bridge: 00006000-00006fff
Memory behind bridge: f7e00000-f7efffff
Prefetchable memory behind bridge: 00000000f8000000-00000000f80fffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>

04:09.1 PIC [0800]: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC [1022:7451] (rev 01) (prog-if 10 [IO-APIC])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0

04:0a.0 PCI bridge [0604]: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge [1022:7450] (rev 12) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=04, secondary=07, subordinate=07, sec-latency=64
I/O behind bridge: 00007000-00007fff
Memory behind bridge: f7f00000-f7ffffff
Prefetchable memory behind bridge: 00000000f8100000-00000000f81fffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>

04:0a.1 PIC [0800]: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC [1022:7451] (rev 01) (prog-if 10 [IO-APIC])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0

05:07.0 PCI bridge [0604]: Pericom Semiconductor Unknown device [12d8:01a7] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 64 bytes
Bus: primary=05, secondary=06, subordinate=06, sec-latency=64
I/O behind bridge: 00006000-00006fff
Memory behind bridge: f7e00000-f7efffff
Prefetchable memory behind bridge: 00000000f8000000-00000000f80fffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>

06:04.0 Ethernet controller [0200]: Intel Corporation 82546GB PRO/1000 GT Quad Port Server Adapter [8086:10b5] (rev 03)
Subsystem: Hewlett-Packard Company NC340T PCI-X Quad-port Gigabit Server Adapter [103c:3109]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (63750ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 34
Region 0: Memory at f7ee0000 (64-bit, non-prefetchable) [size=128K]
Region 2: Memory at f7e80000 (64-bit, non-prefetchable) [size=256K]
Region 4: I/O ports at 6000 [size=64]
[virtual] Expansion ROM at f8000000 [disabled] [size=256K]
Capabilities: <access denied>

06:04.1 Ethernet controller [0200]: Intel Corporation 82546GB PRO/1000 GT Quad Port Server Adapter [8086:10b5] (rev 03)
Subsystem: Hewlett-Packard Company NC340T PCI-X Quad-port Gigabit Server Adapter [103c:3109]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (63750ns min), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 35
Region 0: Memory at f7e60000 (64-bit, non-prefetchable) [size=128K]
Region 4: I/O ports at 6040 [size=64]
Capabilities: <access denied>

06:06.0 Ethernet controller [0200]: Intel Corporation 82546GB PRO/1000 GT Quad Port Server Adapter [8086:10b5] (rev 03)
Subsystem: Hewlett-Packard Company NC340T PCI-X Quad-port Gigabit Server Adapter [103c:3109]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (63750ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 32
Region 0: Memory at f7e40000 (64-bit, non-prefetchable) [size=128K]
Region 4: I/O ports at 6080 [size=64]
Capabilities: <access denied>

06:06.1 Ethernet controller [0200]: Intel Corporation 82546GB PRO/1000 GT Quad Port Server Adapter [8086:10b5] (rev 03)
Subsystem: Hewlett-Packard Company NC340T PCI-X Quad-port Gigabit Server Adapter [103c:3109]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (63750ns min), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 33
Region 0: Memory at f7e20000 (64-bit, non-prefetchable) [size=128K]
Region 4: I/O ports at 60c0 [size=64]
Capabilities: <access denied>

07:09.0 Fibre Channel [0c04]: Emulex Corporation Helios-X LightPulse Fibre Channel Host Adapter [10df:fd00] (rev 01)
Subsystem: Emulex Corporation Helios-X LightPulse Fibre Channel Host Adapter [10df:fd00]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 248 (63750ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 36
Region 0: Memory at f7ff0000 (64-bit, non-prefetchable) [size=4K]
Region 2: Memory at f7fe0000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 7000 [size=256]
[virtual] Expansion ROM at f8100000 [disabled] [size=256K]
Capabilities: <access denied>

07:09.1 Fibre Channel [0c04]: Emulex Corporation Helios-X LightPulse Fibre Channel Host Adapter [10df:fd00] (rev 01)
Subsystem: Emulex Corporation Helios-X LightPulse Fibre Channel Host Adapter [10df:fd00]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 248 (63750ns min), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 37
Region 0: Memory at f7fd0000 (64-bit, non-prefetchable) [size=4K]
Region 2: Memory at f7fc0000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 7400 [size=256]
[virtual] Expansion ROM at f8140000 [disabled] [size=256K]
Capabilities: <access denied>



-- System Information:
Debian Release: 4.0
APT prefers oldstable
APT policy: (500, 'oldstable')
Architecture: amd64 (x86_64)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.26-bpo.1-amd64
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)

Versions of packages linux-image-2.6.26-bpo.1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.11etch2 Debian configuration management sy
ii initramfs-tools [linux-initr 0.85i tools for generating an initramfs
ii module-init-tools 3.3-pre4-2 tools for managing Linux kernel mo

linux-image-2.6.26-bpo.1-amd64 recommends no packages.

-- debconf information:
linux-image-2.6.26-bpo.1-amd64/postinst/old-initrd-link-2.6.26-bpo.1-amd64: true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-bpo.1-amd64/prerm/would-invalidate-boot-loader-2.6.26-bpo.1-amd64: true
linux-image-2.6.26-bpo.1-amd64/postinst/bootloader-test-error-2.6.26-bpo.1-amd64:
linux-image-2.6.26-bpo.1-amd64/preinst/abort-install-2.6.26-bpo.1-amd64:
linux-image-2.6.26-bpo.1-amd64/preinst/elilo-initrd-2.6.26-bpo.1-amd64: true
linux-image-2.6.26-bpo.1-amd64/preinst/failed-to-move-modules-2.6.26-bpo.1-amd64:
linux-image-2.6.26-bpo.1-amd64/postinst/bootloader-error-2.6.26-bpo.1-amd64:
linux-image-2.6.26-bpo.1-amd64/postinst/kimage-is-a-directory:
linux-image-2.6.26-bpo.1-amd64/postinst/create-kimage-link-2.6.26-bpo.1-amd64: true
linux-image-2.6.26-bpo.1-amd64/preinst/abort-overwrite-2.6.26-bpo.1-amd64:
linux-image-2.6.26-bpo.1-amd64/postinst/depmod-error-2.6.26-bpo.1-amd64: false
linux-image-2.6.26-bpo.1-amd64/preinst/overwriting-modules-2.6.26-bpo.1-amd64: true
linux-image-2.6.26-bpo.1-amd64/preinst/lilo-initrd-2.6.26-bpo.1-amd64: true
linux-image-2.6.26-bpo.1-amd64/prerm/removing-running-kernel-2.6.26-bpo.1-amd64: true
linux-image-2.6.26-bpo.1-amd64/postinst/old-dir-initrd-link-2.6.26-bpo.1-amd64: true
linux-image-2.6.26-bpo.1-amd64/postinst/old-system-map-link-2.6.26-bpo.1-amd64: true
linux-image-2.6.26-bpo.1-amd64/preinst/bootloader-initrd-2.6.26-bpo.1-amd64: true
linux-image-2.6.26-bpo.1-amd64/preinst/initrd-2.6.26-bpo.1-amd64:
linux-image-2.6.26-bpo.1-amd64/preinst/lilo-has-ramdisk:
linux-image-2.6.26-bpo.1-amd64/postinst/depmod-error-initrd-2.6.26-bpo.1-amd64: false

Disclaimer: http://www.kuleuven.be/cwis/email_disclaimer.htm



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 

Thread Tools




All times are GMT. The time now is 10:50 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org