Linux Archive

Linux Archive (http://www.linux-archive.org/)
-   Debian Kernel (http://www.linux-archive.org/debian-kernel/)
-   -   Bug#520256: linux-image-2.6.26-1-686: I lost the sound after each reboot, after etch to lenny dist-upgrade and krnel (http://www.linux-archive.org/debian-kernel/265456-bug-520256-linux-image-2-6-26-1-686-i-lost-sound-after-each-reboot-after-etch-lenny-dist-upgrade-krnel.html)

yellowprotoss 03-18-2009 11:23 AM

Bug#520256: linux-image-2.6.26-1-686: I lost the sound after each reboot, after etch to lenny dist-upgrade and krnel
 
Package: linux-image-2.6.26-1-686
Version: 2.6.26-13
Severity: normal


I unfortunately have to do
alsaconf at every reboot
:(





-- Package-specific info:
** Version:
Linux version 2.6.26-1-686 (Debian 2.6.26-13) (waldi@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 SMP Sat Jan 10 18:29:31 UTC 2009

** Command line:
root=/dev/hdf7 ro

** Not tainted

** Kernel log:
[ 6.383588] Probing IDE interface ide1...
[ 6.950984] ide0 at 0xac00-0xac07,0xa882 on irq 17
[ 6.962933] ide1 at 0xa800-0xa807,0xa482 on irq 17
[ 7.002630] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 8.006632] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 8.006689] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 8.006738] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 8.010596] scsi6 : ahci
[ 8.011038] scsi7 : ahci
[ 8.011038] ata7: SATA max UDMA/133 abar m8192@0xfe8fe000 port 0xfe8fe100 irq 16
[ 8.011038] ata8: SATA max UDMA/133 abar m8192@0xfe8fe000 port 0xfe8fe180 irq 16
[ 8.610287] ata7: SATA link down (SStatus 0 SControl 300)
[ 9.038139] ata8: SATA link down (SStatus 0 SControl 300)
[ 9.054712] PDC20269: IDE controller (0x105a:0x4d69 rev 0x02) at PCI slot 0000:05:02.0
[ 9.054712] ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 9.330677] PDC20269: PLL input clock is 16669 kHz
[ 9.362143] PDC20269: 100% native mode on irq 23
[ 9.362187] ide2: BM-DMA at 0xc400-0xc407
[ 9.362203] ide3: BM-DMA at 0xc408-0xc40f
[ 9.362203] Probing IDE interface ide2...
[ 9.650608] hde: SAMSUNG SP1604N, ATA DISK drive
[ 9.930532] hdf: SAMSUNG SP1654N, ATA DISK drive
[ 9.986209] hde: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 9.986281] hde: UDMA/100 mode selected
[ 9.986399] hdf: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 9.986503] hdf: UDMA/100 mode selected
[ 9.990288] Probing IDE interface ide3...
[ 10.994821] ide2 at 0xcc00-0xcc07,0xc882 on irq 23
[ 10.994922] ide3 at 0xc800-0xc807,0xc482 on irq 23
[ 11.353521] hde: max request size: 512KiB
[ 11.353521] hde: 312581808 sectors (160041 MB) w/2048KiB Cache, CHS=19457/255/63
[ 11.353521] hde: cache flushes supported
[ 11.353521] hde:<4>Driver 'sd' needs updating - please use bus_type methods
[ 11.357521] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[ 11.357521] sd 0:0:0:0: [sda] Write Protect is off
[ 11.357521] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 11.357521] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 11.357521] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[ 11.357521] sd 0:0:0:0: [sda] Write Protect is off
[ 11.357521] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 11.357521] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 11.357521] sda: hde1 hde2 <<6>hdb: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
[ 11.365862] Uniform CD-ROM driver Revision: 3.20
[ 11.373543] sda1
[ 11.373543] sd 0:0:0:0: [sda] Attached SCSI disk
[ 11.375764] hde5 hde6 >
[ 11.384518] hdf: max request size: 512KiB
[ 11.387433] hdf: Host Protected Area detected.
[ 11.387435] current capacity is 66055248 sectors (33820 MB)
[ 11.387437] native capacity is 312581808 sectors (160041 MB)
[ 11.387685] hdf: Host Protected Area disabled.
[ 11.387728] hdf: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63
[ 11.388185] hdf: cache flushes supported
[ 11.388272] hdf: hdf1 hdf3 < hdf5 hdf6 hdf7 >
[ 11.783225] PM: Starting manual resume from disk
[ 11.817898] kjournald starting. Commit interval 5 seconds
[ 11.817898] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.087786] udevd version 125 started
[ 13.640075] Linux agpgart interface v0.103
[ 14.065381] input: Power Button (FF) as /class/input/input3
[ 14.112754] ACPI: Power Button (FF) [PWRF]
[ 14.112905] input: Power Button (CM) as /class/input/input4
[ 14.174211] ACPI: Power Button (CM) [PWRB]
[ 14.332097] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 14.332213] iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0860)
[ 14.332289] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 14.444744] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
[ 14.444744] ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 18
[ 14.454483] input: PC Speaker as /class/input/input5
[ 14.646200] parport_pc 00:0b: reported by Plug and Play ACPI
[ 14.646345] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 14.711751] usbcore: registered new interface driver snd-usb-audio
[ 14.815173] cannot find the slot for index 0 (range 0-0), error: -16
[ 14.815220] hda-intel: Error creating card!
[ 14.815263] HDA Intel: probe of 0000:00:1b.0 failed with error -12
[ 15.590488] Adding 2634620k swap on /dev/hdf5. Priority:-1 extents:1 across:2634620k
[ 15.962316] EXT3 FS on hdf7, internal journal
[ 16.158536] loop: module loaded
[ 16.218283] device-mapper: uevent: version 1.0.3
[ 16.218536] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
[ 363.943774] kjournald starting. Commit interval 5 seconds
[ 363.943774] EXT3 FS on hdf1, internal journal
[ 363.943774] EXT3-fs: mounted filesystem with ordered data mode.
[ 364.007834] kjournald starting. Commit interval 5 seconds
[ 364.007834] EXT3 FS on hdf6, internal journal
[ 364.007834] EXT3-fs: mounted filesystem with ordered data mode.
[ 365.215086] r8169: eth0: link up
[ 365.215629] r8169: eth0: link up
[ 365.436144] RPC: Registered udp transport module.
[ 365.436144] RPC: Registered tcp transport module.
[ 365.543277] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 367.381353] NET: Registered protocol family 10
[ 367.385354] lo: Disabled Privacy Extensions
[ 368.312896] lp0: using parport0 (interrupt-driven).
[ 368.324894] ppdev: user-space parallel port driver
[ 369.575233] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 369.583263] NFSD: starting 90-second grace period
[ 378.012911] eth0: no IPv6 routers present
[ 378.968017] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 402.731237] process `skype' is using obsolete setsockopt SO_BSDCOMPAT

** Loaded modules:
Module Size Used by
xt_multiport 2816 1
iptable_filter 2624 1
ip_tables 10160 1 iptable_filter
x_tables 13284 2 xt_multiport,ip_tables
ppdev 6468 0
lp 8164 0
ipv6 235300 20
nfsd 186704 17
auth_rpcgss 33952 1 nfsd
exportfs 3904 1 nfsd
nfs 213896 0
lockd 54248 2 nfsd,nfs
nfs_acl 2912 2 nfsd,nfs
sunrpc 162144 13 nfsd,auth_rpcgss,nfs,lockd,nfs_acl
dm_snapshot 14340 0
dm_mirror 15104 0
dm_log 8452 1 dm_mirror
dm_mod 46184 3 dm_snapshot,dm_mirror,dm_log
loop 12748 0
snd_hda_intel 324248 0
snd_seq_dummy 2660 0
snd_usb_audio 70272 0
snd_pcm_oss 32800 0
snd_mixer_oss 12320 1 snd_pcm_oss
parport_pc 22500 1
parport 30988 3 ppdev,lp,parport_pc
snd_pcm 62596 3 snd_hda_intel,snd_usb_audio,snd_pcm_oss
snd_usb_lib 13440 1 snd_usb_audio
snd_seq_oss 24992 0
pcspkr 2432 0
i2c_i801 7920 0
i2c_core 19828 1 i2c_i801
snd_seq_midi 5728 0
snd_rawmidi 18496 2 snd_usb_lib,snd_seq_midi
snd_hwdep 6212 1 snd_usb_audio
snd_seq_midi_event 6432 2 snd_seq_oss,snd_seq_midi
snd_seq 41456 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_mid i_event
iTCO_wdt 9508 0
snd_timer 17800 2 snd_pcm,snd_seq
snd_seq_device 6380 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi ,snd_seq
snd 45604 11 snd_hda_intel,snd_usb_audio,snd_pcm_oss,snd_mixer_ oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_hwdep,snd_ seq,snd_timer,snd_seq_device
soundcore 6368 1 snd
snd_page_alloc 7816 2 snd_hda_intel,snd_pcm
button 6096 0
intel_agp 22332 0
agpgart 28776 1 intel_agp
evdev 8000 0
ext3 105512 3
jbd 39444 1 ext3
mbcache 7108 1 ext3
ide_cd_mod 27652 0
cdrom 30176 1 ide_cd_mod
sd_mod 22200 0
ide_disk 10496 5
ata_generic 4676 0
ide_pci_generic 3908 0 [permanent]
usbhid 35904 0
hid 33184 1 usbhid
ff_memless 4392 1 usbhid
floppy 47716 0
ahci 23596 0
pdc202xx_new 5216 0 [permanent]
jmicron 2208 0 [permanent]
ide_core 96168 5 ide_cd_mod,ide_disk,ide_pci_generic,pdc202xx_new,j micron
libata 140384 2 ata_generic,ahci
scsi_mod 129356 2 sd_mod,libata
dock 8304 1 libata
r8169 23684 0
ehci_hcd 28428 0
uhci_hcd 18672 0
usbcore 118160 7 snd_usb_audio,snd_usb_lib,usbhid,ehci_hcd,uhci_hcd
thermal 15228 0
processor 32576 1 thermal
fan 4164 0
thermal_sys 10856 3 thermal,processor,fan

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82P965/G965 Memory Controller Hub [8086:29a0] (rev 02)
Subsystem: ASUSTeK Computer Inc. P5B [1043:81ea]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: intel-agp

00:01.0 PCI bridge [0604]: Intel Corporation 82P965/G965 PCI Express Root Port [8086:29a1] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00009000-00009fff
Memory behind bridge: fa700000-fe7fffff
Prefetchable memory behind bridge: 00000000bfe00000-00000000dfdfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at e000 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at e080 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at febff400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd

00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 02)
Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 3
Region 0: Memory at febf8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel modules: snd-hda-intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 02) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Prefetchable memory behind bridge: 00000000dfe00000-00000000dfefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:1c.3 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 [8086:2845] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fe900000-fe9fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 [8086:2847] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: fe800000-fe8fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at d800 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at d880 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at dc00 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at febff000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev f2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fea00000-feafffff
Prefetchable memory behind bridge: 0000000050000000-00000000500fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801HB/HR (ICH8/R) LPC Interface Controller [8086:2810] (rev 02)
Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: iTCO_wdt

00:1f.2 SATA controller [0106]: Intel Corporation 82801HB (ICH8) 4 port SATA AHCI Controller [8086:2824] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 218
Region 0: I/O ports at ec00 [size=8]
Region 1: I/O ports at e880 [size=4]
Region 2: I/O ports at e800 [size=8]
Region 3: I/O ports at e480 [size=4]
Region 4: I/O ports at e400 [size=32]
Region 5: Memory at febff800 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 02)
Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at 50100000 (32-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0400 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801

01:00.0 VGA compatible controller [0300]: nVidia Corporation G70 [GeForce 7300 GT] [10de:0393] (rev a1) (prog-if 00 [VGA controller])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at fc000000 (64-bit, non-prefetchable) [size=16M]
Region 5: I/O ports at 9c00 [size=128]
Expansion ROM at fe7e0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel modules: nvidiafb

02:00.0 SATA controller [0106]: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller [197b:2363] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:81e4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 5: Memory at fe8fe000 (32-bit, non-prefetchable) [size=8K]
Expansion ROM at fe8e0000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci

02:00.1 IDE interface [0101]: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller [197b:2363] (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:81e4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at ac00 [size=8]
Region 1: I/O ports at a880 [size=4]
Region 2: I/O ports at a800 [size=8]
Region 3: I/O ports at a480 [size=4]
Region 4: I/O ports at a400 [size=16]
Capabilities: <access denied>
Kernel driver in use: JMicron IDE
Kernel modules: jmicron

03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
Subsystem: ASUSTeK Computer Inc. Device [1043:81aa]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 219
Region 0: I/O ports at b800 [size=256]
Region 2: Memory at fe9ff000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at fe9c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169

05:02.0 Mass storage controller [0180]: Promise Technology, Inc. 20269 [105a:4d69] (rev 02) (prog-if 85)
Subsystem: Promise Technology, Inc. Ultra133TX2 [105a:4d68]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1000ns min, 4500ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 23
Region 0: I/O ports at cc00 [size=8]
Region 1: I/O ports at c880 [size=4]
Region 2: I/O ports at c800 [size=8]
Region 3: I/O ports at c480 [size=4]
Region 4: I/O ports at c400 [size=16]
Region 5: Memory at feafc000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at 50000000 [disabled] [size=16K]
Capabilities: <access denied>
Kernel driver in use: Promise_IDE
Kernel modules: pdc202xx_new



-- System Information:
Debian Release: 5.0
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)

Kernel: Linux 2.6.26-1-686 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.26-1-686 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo

Versions of packages linux-image-2.6.26-1-686 recommends:
pn libc6-i686 <none> (no description available)

Versions of packages linux-image-2.6.26-1-686 suggests:
ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)

-- debconf information:
linux-image-2.6.26-1-686/preinst/abort-overwrite-2.6.26-1-686:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-1-686/postinst/bootloader-error-2.6.26-1-686:
linux-image-2.6.26-1-686/postinst/depmod-error-initrd-2.6.26-1-686: false
linux-image-2.6.26-1-686/prerm/removing-running-kernel-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/old-system-map-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/abort-install-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/lilo-has-ramdisk:
linux-image-2.6.26-1-686/preinst/bootloader-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/prerm/would-invalidate-boot-loader-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/elilo-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/kimage-is-a-directory:
linux-image-2.6.26-1-686/postinst/old-dir-initrd-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/create-kimage-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/lilo-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/old-initrd-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/overwriting-modules-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/depmod-error-2.6.26-1-686: false
linux-image-2.6.26-1-686/postinst/bootloader-test-error-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/failed-to-move-modules-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/initrd-2.6.26-1-686:



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

maximilian attems 03-18-2009 12:03 PM

Bug#520256: linux-image-2.6.26-1-686: I lost the sound after each reboot, after etch to lenny dist-upgrade and krnel
 
On Wed, Mar 18, 2009 at 01:23:45PM +0100, yellowprotoss wrote:
> Package: linux-image-2.6.26-1-686
> Version: 2.6.26-13
> Severity: normal
>
>
> I unfortunately have to do
> alsaconf at every reboot
> :(
>

please check out sid 2.6.28 snapshots
-> http://wiki.debian.org/DebianKernel

is it fixed there?




--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

maximilian attems 03-18-2009 01:23 PM

Bug#520256: linux-image-2.6.26-1-686: I lost the sound after each reboot, after etch to lenny dist-upgrade and krnel
 
[ keep bug report on cc, this is *not* a private communication, thanks ]

On Wed, Mar 18, 2009 at 02:11:17PM +0100, yellow protoss wrote:
> I changed the menu.lst to
>
> ## can be true or false
> # savedefault=false
>
> ## ## End Default Options ##
>
> title Debian GNU/Linux, kernel 2.6.25-2-686
> root (hd1,6)
> kernel /boot/vmlinuz-2.6.25-2-686 root=/dev/hdf7 ro
> initrd /boot/initrd.img-2.6.25-2-686
>
>
> title Debian GNU/Linux, kernel 2.6.26-1-686
> root (hd1,6)
> kernel /boot/vmlinuz-2.6.26-1-686 root=/dev/hdf7 ro
> initrd /boot/initrd.img-2.6.26-1-686
>
> title Debian GNU/Linux, kernel 2.6.26-1-686 (single-user mode)
> root (hd1,6)
> kernel /boot/vmlinuz-2.6.26-1-686 root=/dev/hdf7 ro single
> initrd /boot/initrd.img-2.6.26-1-686
>
> title Debian GNU/Linux, kernel 2.6.25-2-686 (single-user mode)
> root (hd1,6)
> kernel /boot/vmlinuz-2.6.25-2-686 root=/dev/hdf7 ro single
> initrd /boot/initrd.img-2.6.25-2-686
>
> in order to use the old kernel.
>
> I have no troubles anymore, luckily.
>
> I will check the link.
>
> I think that the kernel from the debian backports are usually better
> compiled.
> This is where I got this workinng 25 version, at the time I had etch stable
>
> Best regards
> Sunny day today

2.6.25 is old and unsupported, you have holes in it.

please report back on 2.6.28




--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

maximilian attems 03-18-2009 04:11 PM

Bug#520256: linux-image-2.6.26-1-686: I lost the sound after each reboot, after etch to lenny dist-upgrade and krnel
 
On Wed, 18 Mar 2009, yellow protoss wrote:

> Hi
> I am unfortunately not capable to compile right a kernel.
> Is there any solutions onto backports for a newer kernel and working?
> backports are usulally better kernels, as they are less buggy, since newer.
>
> I use lenny and backports too in my sources.list
>
> thank you for you help, it's very interesting
>
> Yellow

see sid / trunk snapshots
http://wiki.debian.org/DebianKernel




--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org


All times are GMT. The time now is 02:43 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.