FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 03-18-2009, 08:31 AM
Felipe Sateler
 
Default Bug#520232: linux-image-2.6.28-1-amd64: have to load pcspkr to disable the pc speaker

Package: linux-image-2.6.28-1-amd64
Version: 2.6.28-1
Severity: normal

Upgrading from 2.6.26 to 2.6.28 the pc speaker started doing annoying
beeps when eg, tab-completing. To avoid this I used to blacklist pcspkr,
but now it seems I have to load it.
In summary: pc speaker on when the pcspkr module unloaded, off when the
module is loaded.

-- Package-specific info:
** Version:
Linux version 2.6.28-1-amd64 (Debian 2.6.28-1) (maks@debian.org) (gcc version 4.3.3 (Debian 4.3.3-4) ) #1 SMP Wed Feb 18 17:16:12 UTC 2009

** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.28-1-amd64 root=UUID=1a73bf6e-7db2-4013-b64d-0898a5a8d0d7 ro quiet

** Not tainted

** Kernel log:
[152778.128284] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00407)
[152778.128330] ahci 0000:00:1f.2: setting latency timer to 64
[152778.128379] i801_smbus 0000:00:1f.3: restoring config space at offset 0xf (was 0x200, writing 0x20a)
[152778.128412] i801_smbus 0000:00:1f.3: restoring config space at offset 0x4 (was 0x0, writing 0xfe9fb700)
[152778.128423] i801_smbus 0000:00:1f.3: restoring config space at offset 0x1 (was 0x2800001, writing 0x2800103)
[152778.144332] tg3 0000:09:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfffb0000)
[152778.144391] tg3 0000:09:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[152778.144408] tg3 0000:09:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100106)
[152778.160242] firewire_ohci 0000:03:01.0: restoring config space at offset 0xf (was 0x4020100, writing 0x4020105)
[152778.160272] firewire_ohci 0000:03:01.0: restoring config space at offset 0x3 (was 0x800000, writing 0x804010)
[152778.160281] firewire_ohci 0000:03:01.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
[152778.256241] sdhci-pci 0000:03:01.1: restoring config space at offset 0xf (was 0x200, writing 0x204)
[152778.256269] sdhci-pci 0000:03:01.1: restoring config space at offset 0x4 (was 0x0, writing 0xfe4ff500)
[152778.256276] sdhci-pci 0000:03:01.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804010)
[152778.256285] sdhci-pci 0000:03:01.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
[152778.256304] sdhci-pci 0000:03:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[152778.257325] pci 0000:03:01.2: restoring config space at offset 0xf (was 0x200, writing 0x204)
[152778.257346] pci 0000:03:01.2: restoring config space at offset 0x4 (was 0x0, writing 0xfe4ff600)
[152778.257351] pci 0000:03:01.2: restoring config space at offset 0x3 (was 0x800000, writing 0x804010)
[152778.257358] pci 0000:03:01.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
[152778.257378] pci 0000:03:01.3: restoring config space at offset 0xf (was 0x200, writing 0x204)
[152778.257400] pci 0000:03:01.3: restoring config space at offset 0x4 (was 0x0, writing 0xfe4ff700)
[152778.257405] pci 0000:03:01.3: restoring config space at offset 0x3 (was 0x800000, writing 0x804010)
[152778.257412] pci 0000:03:01.3: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
[152778.448250] ata3: SATA link down (SStatus 0 SControl 300)
[152778.568273] sd 0:0:0:0: [sda] Starting disk
[152779.009244] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[152779.042671] ata1.00: configured for UDMA/133
[152779.042865] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
[152779.042890] sd 0:0:0:0: [sda] Write Protect is off
[152779.042894] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[152779.042929] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[152779.050687] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[152779.051647] hda: UDMA/33 mode selected
[152779.052713] pci 0000:00:02.0: setting latency timer to 64
[152779.300250] pm_op(): usb_dev_resume+0x0/0x5 returns -19
[152779.300253] PM: Device 1-2 failed to resume: error -19
[152779.300261] pm_op(): usb_dev_resume+0x0/0x5 returns -19
[152779.300264] PM: Device 1-2.1 failed to resume: error -19
[152779.300278] pm_op(): usb_dev_resume+0x0/0x5 returns -19
[152779.300281] PM: Device 1-2.2 failed to resume: error -19
[152779.300291] pm_op(): usb_dev_resume+0x0/0x5 returns -19
[152779.300294] PM: Device 1-2.3 failed to resume: error -19
[152779.300932] Restarting tasks ... <6>usb 1-2: USB disconnect, address 29
[152779.338508] usb 1-2.1: USB disconnect, address 30
[152779.338908] usb 1-2.2: USB disconnect, address 31
[152779.339009] done.
[152779.393287] usb 1-2.3: USB disconnect, address 32
[152781.388298] tg3 0000:09:00.0: irq 4346 for MSI/MSI-X
[152781.441717] ADDRCONF(NETDEV_UP): eth0: link is not ready
[152781.462188] iwl3945 0000:0c:00.0: enabling device (0000 -> 0002)
[152781.462201] iwl3945 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[152781.462276] iwl3945 0000:0c:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[152781.462351] iwl3945 0000:0c:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xfe8ff000)
[152781.462364] iwl3945 0000:0c:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[152781.462383] iwl3945 0000:0c:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100106)
[152781.462567] iwl3945 0000:0c:00.0: irq 4345 for MSI/MSI-X
[152781.484182] CE: hpet increasing min_delta_ns to 75936 nsec
[152781.547603] Registered led device: iwl-phy0:radio
[152781.547645] Registered led device: iwl-phy0:assoc
[152781.547669] Registered led device: iwl-phy0:RX
[152781.547692] Registered led device: iwl-phy0:TX
[152781.604601] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[152855.853096] wlan0: authenticate with AP 00:1e:58:bb:1e:55
[152855.858758] wlan0: authenticated
[152855.858766] wlan0: associate with AP 00:1e:58:bb:1e:55
[152855.861928] wlan0: RX AssocResp from 00:1e:58:bb:1e:55 (capab=0x431 status=0 aid=2)
[152855.861935] wlan0: associated
[152855.882416] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[152875.624023] wlan0: no IPv6 routers present
[154696.976167] usb 1-2: new full speed USB device using uhci_hcd and address 33
[154697.161321] usb 1-2: configuration #1 chosen from 1 choice
[154697.164970] hub 1-2:1.0: USB hub found
[154697.170201] hub 1-2:1.0: 3 ports detected
[154697.175455] usb 1-2: New USB device found, idVendor=0a5c, idProduct=4500
[154697.175462] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[154697.175468] usb 1-2: Product: BCM2045B2
[154697.175472] usb 1-2: Manufacturer: Broadcom
[154697.449172] usb 1-2.1: new full speed USB device using uhci_hcd and address 34
[154697.577449] usb 1-2.1: configuration #1 chosen from 1 choice
[154697.581137] usb 1-2.1: New USB device found, idVendor=413c, idProduct=8126
[154697.581144] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[154697.581150] usb 1-2.1: Product: BCM2045
[154697.581154] usb 1-2.1: Manufacturer: Broadcom Corp
[154697.705545] usb 1-2.2: new full speed USB device using uhci_hcd and address 35
[154697.844894] usb 1-2.2: configuration #1 chosen from 1 choice
[154697.854055] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb1/1-2/1-2.2/1-2.2:1.0/input/input34
[154697.889177] generic-usb 0003:0A5C:4502.0018: input,hidraw0: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1a.0-2.2/input0
[154697.889285] usb 1-2.2: New USB device found, idVendor=0a5c, idProduct=4502
[154697.889288] usb 1-2.2: New USB device strings: Mfr=1, Product=0, SerialNumber=0
[154697.889290] usb 1-2.2: Manufacturer: Broadcom Corp
[154697.973147] usb 1-2.3: new full speed USB device using uhci_hcd and address 36
[154698.113263] usb 1-2.3: configuration #1 chosen from 1 choice
[154698.123966] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb1/1-2/1-2.3/1-2.3:1.0/input/input35
[154698.156264] generic-usb 0003:0A5C:4503.0019: input,hidraw1: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1a.0-2.3/input0
[154698.156520] usb 1-2.3: New USB device found, idVendor=0a5c, idProduct=4503
[154698.156527] usb 1-2.3: New USB device strings: Mfr=1, Product=0, SerialNumber=0
[154698.156533] usb 1-2.3: Manufacturer: Broadcom Corp
[159012.870454] jackd[2551]: segfault at 90 ip 00007f4e82add588 sp 00007fff8b33e1c0 error 4 in libpthread-2.9.so[7f4e82ad6000+16000]
[161790.170369] input: PC Speaker as /devices/platform/pcspkr/input/input36

** Loaded modules:
Module Size Used by
pcspkr 68352 0
iwl3945 152680 0
rfkill 77504 2 iwl3945
mac80211 221616 1 iwl3945
led_class 70280 1 iwl3945
cfg80211 97440 2 iwl3945,mac80211
cpufreq_stats 70404 0
tun 76676 0
appletalk 96352 0
ax25 114968 0
ipx 89296 0
p8023 67584 1 ipx
mmc_block 75784 0
nls_utf8 67584 1
ntfs 250208 1
nls_base 74372 2 nls_utf8,ntfs
i915 123272 2
drm 167888 3 i915
ppdev 73096 0
parport_pc 92312 0
lp 75876 0
parport 103328 3 ppdev,parport_pc,lp
rfcomm 102304 0
hidp 81280 2
l2cap 86656 8 rfcomm,hidp
ipv6 348928 14
binfmt_misc 74892 1
fuse 117056 1
coretemp 72192 0
cpufreq_powersave 67328 0
cpufreq_userspace 69252 0
cpufreq_conservative 72712 0
acpi_cpufreq 74000 0
loop 80652 0
firewire_sbp2 80912 0
joydev 76544 0
snd_hda_intel 553796 1
snd_pcm_oss 102176 0
snd_mixer_oss 80256 1 snd_pcm_oss
snd_pcm 144264 2 snd_hda_intel,snd_pcm_oss
snd_seq_dummy 68740 0
snd_seq_oss 94272 0
snd_seq_midi 72256 0
snd_rawmidi 88480 1 snd_seq_midi
snd_seq_midi_event 73088 2 snd_seq_oss,snd_seq_midi
snd_seq 115568 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_mid i_event
dcdbas 73648 0
arc4 67584 2
ecb 68608 2
psmouse 106908 0
serio_raw 71428 0
i2c_i801 75292 0
i2c_core 90528 1 i2c_i801
iTCO_wdt 78032 0
snd_timer 87824 2 snd_pcm,snd_seq
snd_seq_device 73108 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi ,snd_seq
snd 125432 11 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,sn d_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_de vice
soundcore 73488 1 snd
snd_page_alloc 75280 2 snd_hda_intel,snd_pcm
btusb 77976 0
evdev 76304 8
bluetooth 120740 4 rfcomm,hidp,l2cap,btusb
intel_agp 93936 1
wmi 73280 0
button 72992 0
battery 78088 0
video 86036 0
output 68992 1 video
ac 70664 0
ext3 186768 1
jbd 116264 1 ext3
mbcache 74628 1 ext3
ide_cd_mod 102544 0
cdrom 99112 1 ide_cd_mod
ide_pci_generic 70148 0
usbhid 98864 0
hid 107152 2 hidp,usbhid
sd_mod 97576 4
crc_t10dif 67712 1 sd_mod
piix 72712 0
ide_core 178284 3 ide_cd_mod,ide_pci_generic,piix
ahci 97932 4
ata_generic 71556 0
libata 237504 2 ahci,ata_generic
scsi_mod 229160 3 firewire_sbp2,sd_mod,libata
sdhci_pci 73472 0
sdhci 81924 1 sdhci_pci
mmc_core 117568 2 mmc_block,sdhci
firewire_ohci 88708 0
firewire_core 104256 2 firewire_sbp2,firewire_ohci
crc_itu_t 67840 1 firewire_core
tg3 165764 0
ehci_hcd 99852 0
uhci_hcd 87968 0
thermal 84384 1
processor 111544 4 acpi_cpufreq,thermal
fan 70920 1
thermal_sys 78656 4 video,thermal,processor,fan

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 0c)
Subsystem: Dell Inspiron 1420 [1028:01f3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp

00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a02] (rev 0c) (prog-if 00 [VGA controller])
Subsystem: Dell Inspiron 1420 [1028:01f3]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 4344
Region 0: Memory at fea00000 (64-bit, non-prefetchable) [size=1M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at eff8 [size=8]
Capabilities: <access denied>
Kernel modules: intelfb

00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a03] (rev 0c)
Subsystem: Dell Dell Inspiron 1420 [1028:01f3]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at feb00000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>

00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Inspiron 1420 [1028:01f3]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 6f20 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Inspiron 1420 [1028:01f3]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 6f00 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell Inspiron 1420 [1028:01f3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 0: Memory at fed1c400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd

00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 02)
Subsystem: Dell Inspiron 1420 [1028:01f3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 21
Region 0: Memory at fe9fc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0
Memory behind bridge: fe800000-fe8fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:1c.3 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 [8086:2845] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0d, subordinate=0e, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fe600000-fe7fffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:1c.5 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 [8086:2849] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
Memory behind bridge: fe500000-fe5fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Inspiron 1420 [1028:01f3]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 6f80 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Inspiron 1420 [1028:01f3]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 6f60 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Inspiron 1420 [1028:01f3]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at 6f40 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell Inspiron 1420 [1028:01f3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at fed1c000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Memory behind bridge: fe400000-fe4fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller [8086:2815] (rev 02)
Subsystem: Dell Inspiron 1420 [1028:01f3]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: iTCO_wdt

00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Dell Inspiron 1420 [1028:01f3]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 6fa0 [size=16]
Kernel driver in use: PIIX_IDE
Kernel modules: ide-pci-generic, piix, ata_generic

00:1f.2 SATA controller [0106]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller [8086:2829] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: Dell Device [1028:01f3]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 4347
Region 0: I/O ports at 6eb0 [size=8]
Region 1: I/O ports at 6eb8 [size=4]
Region 2: I/O ports at 6ec0 [size=8]
Region 3: I/O ports at 6ec8 [size=4]
Region 4: I/O ports at 6ee0 [size=32]
Region 5: Memory at fe9fb800 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 02)
Subsystem: Dell Inspiron 1420 [1028:01f3]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe9fb700 (32-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 10c0 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801

03:01.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 05) (prog-if 10 [OHCI])
Subsystem: Dell Device [1028:01f3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fe4ff800 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
Kernel modules: firewire-ohci

03:01.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 22) (prog-if 01)
Subsystem: Dell Device [1028:01f3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 18
Region 0: Memory at fe4ff500 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
Kernel modules: sdhci-pci

03:01.2 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 12)
Subsystem: Dell Device [1028:01f3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 4
Region 0: Memory at fe4ff600 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>

03:01.3 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev 12)
Subsystem: Dell Device [1028:01f3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 4
Region 0: Memory at fe4ff700 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>

09:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express [14e4:1713] (rev 02)
Subsystem: Dell Inspiron 1420 [1028:01f3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 4346
Region 0: Memory at fe5f0000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: tg3
Kernel modules: tg3

0c:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02)
Subsystem: Intel Corporation Device [8086:1020]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 4345
Region 0: Memory at fe8ff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: iwl3945
Kernel modules: iwl3945



-- System Information:
Debian Release: 5.0
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.28-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.28-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo

linux-image-2.6.28-1-amd64 recommends no packages.

Versions of packages linux-image-2.6.28-1-amd64 suggests:
ii grub-pc [grub] 1.96+20080724-14 GRand Unified Bootloader, version
pn linux-doc-2.6.28 <none> (no description available)

-- debconf information:
linux-image-2.6.28-1-amd64/postinst/depmod-error-initrd-2.6.28-1-amd64: false
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.28-1-amd64/postinst/bootloader-error-2.6.28-1-amd64:
linux-image-2.6.28-1-amd64/postinst/depmod-error-2.6.28-1-amd64: false
linux-image-2.6.28-1-amd64/postinst/bootloader-test-error-2.6.28-1-amd64:
linux-image-2.6.28-1-amd64/postinst/old-system-map-link-2.6.28-1-amd64: true
linux-image-2.6.28-1-amd64/preinst/initrd-2.6.28-1-amd64:
linux-image-2.6.28-1-amd64/preinst/bootloader-initrd-2.6.28-1-amd64: true
linux-image-2.6.28-1-amd64/postinst/old-initrd-link-2.6.28-1-amd64: true
linux-image-2.6.28-1-amd64/postinst/old-dir-initrd-link-2.6.28-1-amd64: true
linux-image-2.6.28-1-amd64/preinst/failed-to-move-modules-2.6.28-1-amd64:
linux-image-2.6.28-1-amd64/preinst/elilo-initrd-2.6.28-1-amd64: true
linux-image-2.6.28-1-amd64/preinst/lilo-initrd-2.6.28-1-amd64: true
linux-image-2.6.28-1-amd64/preinst/overwriting-modules-2.6.28-1-amd64: true
linux-image-2.6.28-1-amd64/preinst/lilo-has-ramdisk:
linux-image-2.6.28-1-amd64/preinst/abort-overwrite-2.6.28-1-amd64:
linux-image-2.6.28-1-amd64/preinst/abort-install-2.6.28-1-amd64:
linux-image-2.6.28-1-amd64/postinst/kimage-is-a-directory:
linux-image-2.6.28-1-amd64/postinst/create-kimage-link-2.6.28-1-amd64: true
linux-image-2.6.28-1-amd64/prerm/removing-running-kernel-2.6.28-1-amd64: true
linux-image-2.6.28-1-amd64/prerm/would-invalidate-boot-loader-2.6.28-1-amd64: true



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 
Old 12-29-2009, 03:01 PM
Moritz Muehlenhoff
 
Default Bug#520232: linux-image-2.6.28-1-amd64: have to load pcspkr to disable the pc speaker

On Wed, Mar 18, 2009 at 08:31:49PM +1100, Felipe Sateler wrote:
> Package: linux-image-2.6.28-1-amd64
> Version: 2.6.28-1
> Severity: normal
>
> Upgrading from 2.6.26 to 2.6.28 the pc speaker started doing annoying
> beeps when eg, tab-completing. To avoid this I used to blacklist pcspkr,
> but now it seems I have to load it.
> In summary: pc speaker on when the pcspkr module unloaded, off when the
> module is loaded.

Hi,
The next release of Debian (6.0, code name Squeeze) will be based
on 2.6.32. Please test the current 2.6.32 from unstable and tell
us whether the problem persists. If so, we should report it upstream
to the kernel.org developers.

The 2.6.32 kernel is available from packages.debian.org and can
be installed in both Debian stable, testing and unstable
installations.

Thanks,
Moritz



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 

Thread Tools




All times are GMT. The time now is 05:22 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org