FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 03-09-2009, 01:23 PM
Olaf van der Spek
 
Default Bug#516705: linux-image-2.6.26-1-686: Me too

Package: linux-image-2.6.26-1-686
Version: 2.6.26-13
Followup-For: Bug #516705

Hi,

I experience this issue as well:
Mar 9 15:02:31 router kernel: [53539.491257] 0000:00:0b.0: tulip_stop_rxtx() failed (CSR5 0xf0260000 CSR6 0xb3862002)
Mar 9 15:02:37 router kernel: [53545.491052] 0000:00:0b.0: tulip_stop_rxtx() failed (CSR5 0xf0260000 CSR6 0xb3862002)

It also occurs on a DSL gateway, although this is a fresh Lenny install. I'm not sure a reboot (with kexec-tools) fixes it.

Olaf

/etc/network/interfaces:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
auto br0
# iface eth0 inet static
iface br0 inet static
address 192.168.1.250
netmask 255.255.255.0
network 192.168.1.0
broadcast 192.168.1.255
gateway 192.168.1.254
# dns-* options are implemented by the resolvconf package, if installed
bridge_ports all
dns-nameservers 192.168.1.254

-- Package-specific info:
** Version:
Linux version 2.6.26-1-686 (Debian 2.6.26-13) (waldi@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 SMP Sat Jan 10 18:29:31 UTC 2009

** Command line:
root=/dev/hda1 ro quiet

** Not tainted

** Kernel log:
[ 2.303048] NET: Registered protocol family 17
[ 2.303048] Using IPI No-Shortcut mode
[ 2.303048] registered taskstats version 1
[ 2.303048] rtc_cmos 00:04: setting system clock to 2009-03-09 14:07:35 UTC (1236607655)
[ 2.303843] Freeing unused kernel memory: 244k freed
[ 2.613666] thermal: Unknown symbol acpi_processor_set_thermal_limit
[ 3.098155] Uniform Multi-Platform E-IDE driver
[ 3.098177] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 3.106142] Linux Tulip driver version 1.1.15-NAPI (Feb 27, 2007)
[ 3.110776] tulip0: EEPROM default media type Autosense.
[ 3.110788] tulip0: Index #0 - Media 10baseT (#0) described by a 21142 Serial PHY (2) block.
[ 3.110798] tulip0: Index #1 - Media 10baseT-FDX (#4) described by a 21142 Serial PHY (2) block.
[ 3.110808] tulip0: Index #2 - Media 100baseTx (#3) described by a 21143 SYM PHY (4) block.
[ 3.110818] tulip0: Index #3 - Media 100baseTx-FDX (#5) described by a 21143 SYM PHY (4) block.
[ 3.116027] eth0: Digital DS21142/43 Tulip rev 65 at Port 0xec00, 00:10:6f:02:39:a5, IRQ 19.
[ 3.146973] SCSI subsystem initialized
[ 3.156777] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 3.156850] 8139cp 0000:00:12.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[ 3.156934] 8139cp 0000:00:12.0: Try the "8139too" driver instead.
[ 3.164196] 8139too Fast Ethernet driver 0.9.28
[ 3.165589] eth1: RealTek RTL8139 at 0xe800, 00:02:44:52:fe:db, IRQ 19
[ 3.165598] eth1: Identified 8139 chip type 'RTL-8100B/8139D'
[ 3.168444] PIIX4: IDE controller (0x8086:0x7111 rev 0x01) at PCI slot 0000:00:07.1
[ 3.168479] PIIX4: not 100% native mode: will probe irqs later
[ 3.168500] ide0: BM-DMA at 0xffa0-0xffa7
[ 3.168518] ide1: BM-DMA at 0xffa8-0xffaf
[ 3.168530] Probing IDE interface ide0...
[ 3.224748] usbcore: registered new interface driver usbfs
[ 3.224832] usbcore: registered new interface driver hub
[ 3.224912] usbcore: registered new device driver usb
[ 3.236824] USB Universal Host Controller Interface driver v3.0
[ 3.459199] hda: WDC WD200BB-60CVB0, ATA DISK drive
[ 3.795070] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 3.796206] hda: UDMA/33 mode selected
[ 3.797110] Probing IDE interface ide1...
[ 4.530671] hdc: LTN486S, ATAPI CD/DVD-ROM drive
[ 4.866514] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 4.866597] hdc: MWDMA2 mode selected
[ 4.866760] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 4.866838] ide1 at 0x170-0x177,0x376 on irq 15
[ 4.867291] aic7xxx 0000:00:06.0: enabling device (0006 -> 0007)
[ 4.867309] PCI: No IRQ known for interrupt pin A of device 0000:00:06.0. Probably buggy MP table.
[ 4.881402] aic7xxx: probe of 0000:00:06.0 failed with error -16
[ 4.886415] PCI: No IRQ known for interrupt pin D of device 0000:00:07.2. Probably buggy MP table.
[ 4.886415] uhci_hcd 0000:00:07.2: Found HC with no IRQ. Check BIOS/PCI 0000:00:07.2 setup!
[ 4.886415] uhci_hcd 0000:00:07.2: init 0000:00:07.2 fail, -19
[ 4.934416] libata version 3.00 loaded.
[ 4.980731] hda: max request size: 128KiB
[ 4.986427] hda: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=38792/16/63
[ 4.986427] hda: cache flushes not supported
[ 4.986427] hda: hda1 hda2 < hda5 >
[ 5.013844] hdc: ATAPI 48X CD-ROM drive, 120kB Cache
[ 5.013844] Uniform CD-ROM driver Revision: 3.20
[ 5.279364] PM: Starting manual resume from disk
[ 5.359358] kjournald starting. Commit interval 5 seconds
[ 5.359358] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.155951] udevd version 125 started
[ 8.421961] Linux agpgart interface v0.103
[ 8.451039] agpgart: Detected an Intel 440GX Chipset.
[ 8.451585] agpgart: AGP aperture is 4M @ 0xff400000
[ 8.485869] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 8.502119] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.592100] input: PC Speaker as /class/input/input0
[ 8.603079] piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
[ 8.943061] Error: Driver 'pcspkr' is already registered, aborting...
[ 10.067166] Adding 859436k swap on /dev/hda5. Priority:-1 extents:1 across:859436k
[ 10.569563] EXT3 FS on hda1, internal journal
[ 11.058446] loop: module loaded
[ 12.170439] Bridge firewalling registered
[ 12.172178] br0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
[ 12.212135] device eth0 entered promiscuous mode
[ 12.221194] device eth1 entered promiscuous mode
[ 12.226474] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 12.236827] br0: port 2(eth1) entering learning state
[ 12.236843] br0: port 1(eth0) entering learning state
[ 27.235427] br0: topology change detected, propagating
[ 27.235444] br0: port 2(eth1) entering forwarding state
[ 27.235451] br0: topology change detected, propagating
[ 27.235458] br0: port 1(eth0) entering forwarding state
[ 29.937547] NET: Registered protocol family 10
[ 29.939164] lo: Disabled Privacy Extensions
[ 40.109810] eth0: no IPv6 routers present
[ 40.453669] br0: no IPv6 routers present
[ 40.785584] eth1: no IPv6 routers present
[ 168.144033] eth1: link down
[ 168.148794] br0: port 2(eth1) entering disabled state
[ 171.133082] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 171.134339] br0: port 2(eth1) entering learning state
[ 172.163905] eth1: link down
[ 172.168790] br0: port 2(eth1) entering disabled state
[ 173.754257] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 173.755948] br0: port 2(eth1) entering learning state
[ 188.756371] br0: topology change detected, propagating
[ 188.756389] br0: port 2(eth1) entering forwarding state
[ 293.371930] eth1: link down
[ 293.374036] br0: port 2(eth1) entering disabled state
[ 648.822247] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 648.824153] br0: port 2(eth1) entering learning state
[ 663.822138] br0: topology change detected, propagating
[ 663.822159] br0: port 2(eth1) entering forwarding state

** Loaded modules:
Module Size Used by
ipv6 235300 21
bridge 40024 0
loop 12748 0
evdev 8000 0
snd_pcm 62596 0
snd_timer 17800 1 snd_pcm
snd 45604 2 snd_pcm,snd_timer
soundcore 6368 1 snd
snd_page_alloc 7816 1 snd_pcm
i2c_piix4 7216 0
pcspkr 2432 0
i2c_core 19828 1 i2c_piix4
shpchp 25528 0
pci_hotplug 23460 1 shpchp
intel_agp 22332 1
agpgart 28776 1 intel_agp
ext3 105512 1
jbd 39444 1 ext3
mbcache 7108 1 ext3
ide_cd_mod 27652 0
cdrom 30176 1 ide_cd_mod
ide_disk 10496 3
ata_generic 4676 0
libata 140384 1 ata_generic
dock 8304 1 libata
ide_pci_generic 3908 0 [permanent]
aic7xxx 117592 0
scsi_transport_spi 19840 1 aic7xxx
uhci_hcd 18672 0
usbcore 118160 2 uhci_hcd
piix 6568 0 [permanent]
8139too 20320 0
8139cp 16800 0
mii 4896 2 8139too,8139cp
scsi_mod 129356 3 libata,aic7xxx,scsi_transport_spi
tulip 44064 0
ide_core 96168 4 ide_cd_mod,ide_disk,ide_pci_generic,piix
thermal_sys 10856 0

** PCI devices:
not available


-- System Information:
Debian Release: 5.0
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)

Kernel: Linux 2.6.26-1-686 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.26-1-686 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo

Versions of packages linux-image-2.6.26-1-686 recommends:
ii libc6-i686 2.7-18 GNU C Library: Shared libraries [i

Versions of packages linux-image-2.6.26-1-686 suggests:
ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)

-- debconf information:
linux-image-2.6.26-1-686/preinst/abort-overwrite-2.6.26-1-686:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-1-686/postinst/bootloader-error-2.6.26-1-686:
linux-image-2.6.26-1-686/postinst/depmod-error-initrd-2.6.26-1-686: false
linux-image-2.6.26-1-686/prerm/removing-running-kernel-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/old-system-map-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/abort-install-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/lilo-has-ramdisk:
linux-image-2.6.26-1-686/preinst/bootloader-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/prerm/would-invalidate-boot-loader-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/elilo-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/kimage-is-a-directory:
linux-image-2.6.26-1-686/postinst/old-dir-initrd-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/create-kimage-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/lilo-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/old-initrd-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/overwriting-modules-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/depmod-error-2.6.26-1-686: false
linux-image-2.6.26-1-686/postinst/bootloader-test-error-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/failed-to-move-modules-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/initrd-2.6.26-1-686:



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 

Thread Tools




All times are GMT. The time now is 08:12 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org