Package: linux-image-2.6.26-1-686
Version: 2.6.26-13
Severity: normal

When downloading pictures from one of my PTP cameras my USB host
controller appears to "die". Pictures that have been successfully
transferred are not deleted from the camera. The ports connected to
that controller don't work until the machine is rebooted.

I don't see the same problem on my other PTP camera. I suspect that
this is because the camera that shows the problem contains a number of
large video files; I believe it is during the transfer of one of these
that things go awry.

I did not see this problem on etch (using either the original etch
kernel or the 2.6.24 etchnhalf kernel.)

-- Package-specific info:
** Version:
Linux version 2.6.26-1-686 (Debian 2.6.26-13) (waldi@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 SMP Sat Jan 10 18:29:31 UTC 2009

** Command line:
auto BOOT_IMAGE=Linux ro root=fd00

** Not tainted

** Kernel log:
[ 10.941383] input: Budget-CI dvb ir receiver saa7146 (0) as /class/input/input4
[ 10.941664] hub 2-2:1.0: 4 ports detected
[ 11.034209] DVB: registering frontend 0 (Philips TDA10045H DVB-T)...
[ 11.034813] NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
[ 11.034864] NFORCE2: IDE controller (0x10de:0x0065 rev 0xa2) at PCI slot 0000:00:09.0
[ 11.034954] NFORCE2: not 100% native mode: will probe irqs later
[ 11.035016] ide0: BM-DMA at 0xf000-0xf007
[ 11.035069] ide1: BM-DMA at 0xf008-0xf00f
[ 11.035118] Probing IDE interface ide0...
[ 11.060197] usb 2-2: New USB device found, idVendor=0451, idProduct=1446
[ 11.060254] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 11.326708] NET: Registered protocol family 8
[ 11.326764] NET: Registered protocol family 20
[ 11.364034] usb 1-3: new full speed USB device using ohci_hcd and address 3
[ 11.579334] usb 1-3: configuration #1 chosen from 1 choice
[ 11.582429] usb 1-3: New USB device found, idVendor=06b9, idProduct=4061
[ 11.582479] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 11.582530] usb 1-3: Product: Speed Touch 330
[ 11.582575] usb 1-3: Manufacturer: THOMSON
[ 11.582620] usb 1-3: SerialNumber: 000E50F673E1
[ 11.772168] hda: _NEC DVD_RW ND-3520A, ATAPI CD/DVD-ROM drive
[ 11.797524] usb 2-2.2: new low speed USB device using ohci_hcd and address 4
[ 11.909580] usb 2-2.2: configuration #1 chosen from 1 choice
[ 11.912622] usb 2-2.2: New USB device found, idVendor=045e, idProduct=0039
[ 11.912673] usb 2-2.2: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 11.912731] usb 2-2.2: Product: Microsoft 5-Button Mouse with IntelliEye(TM)
[ 11.912780] usb 2-2.2: Manufacturer: Microsoft
[ 12.444069] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 12.444232] hda: UDMA/33 mode selected
[ 12.444446] Probing IDE interface ide1...
[ 12.600021] usb 1-3: reset full speed USB device using ohci_hcd and address 3
[ 12.816077] firmware: requesting speedtch-1.bin.4.00
[ 12.821969] usbcore: registered new interface driver speedtch
[ 12.822533] usbcore: registered new interface driver hiddev
[ 12.828781] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /class/input/input5
[ 12.834746] input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:02.1-2.2
[ 12.834968] usbcore: registered new interface driver usbhid
[ 12.835017] usbhid: v2.6:USB HID core driver
[ 12.869567] firmware: requesting speedtch-1.bin.4
[ 12.989516] firmware: requesting speedtch-1.bin
[ 13.012130] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 13.013474] ide1 at 0x170-0x177,0x376 on irq 15
[ 13.107841] speedtch 1-3:1.0: found stage 1 firmware speedtch-1.bin
[ 13.107900] firmware: requesting speedtch-2.bin.4.00
[ 13.213301] firmware: requesting speedtch-2.bin.4
[ 13.263578] firmware: requesting speedtch-2.bin
[ 13.353494] hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
[ 13.353745] Uniform CD-ROM driver Revision: 3.20
[ 13.578421] speedtch 1-3:1.0: found stage 2 firmware speedtch-2.bin
[ 14.205691] Adding 4194296k swap on /dev/mapper/deneb1-swap. Priority:-1 extents:1 across:4194296k
[ 14.390301] Filesystem "dm-0": Disabling barriers, not supported by the underlying device
[ 16.941217] fuse init (API version 7.9)
[ 17.139814] kjournald starting. Commit interval 5 seconds
[ 17.145196] EXT3 FS on md0, internal journal
[ 17.145196] EXT3-fs: mounted filesystem with ordered data mode.
[ 17.148303] Filesystem "dm-2": Disabling barriers, not supported by the underlying device
[ 17.172003] XFS mounting filesystem dm-2
[ 17.328767] Ending clean XFS mount for filesystem: dm-2
[ 18.816978] eth1: setting full-duplex.
[ 19.456275] NET: Registered protocol family 10
[ 19.456858] lo: Disabled Privacy Extensions
[ 19.813712] ATM dev 0: ADSL line is synchronising
[ 29.788008] eth1: no IPv6 routers present
[ 39.798062] eth0: no link during initialization.
[ 39.798654] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 50.335616] PPP generic driver version 2.4.2
[ 54.813459] ATM dev 0: ADSL line is up (8128 kb/s down | 448 kb/s up)
[ 56.931106] PPP BSD Compression module registered
[ 57.060498] PPP Deflate Compression module registered
[ 70.520003] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 70.592198] nf_conntrack version 0.5.0 (12288 buckets, 49152 max)
[ 70.819616] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 79.533464] lp0: using parport0 (interrupt-driven).
[ 79.574403] ppdev: user-space parallel port driver
[ 84.495609] RPC: Registered udp transport module.
[ 84.495616] RPC: Registered tcp transport module.
[ 84.611519] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 85.013258] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 85.013309] NFSD: starting 90-second grace period
[ 86.281961] device eth0 entered promiscuous mode
[ 88.136005] warning: `ntpd' uses 32-bit capabilities (legacy support in use)
[ 90.537364] [drm] Initialized drm 1.1.0 20060810
[ 90.548267] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[ 90.548281] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [APC4] -> GSI 19 (level, high) -> IRQ 19
[ 90.548368] [drm] Initialized radeon 1.29.0 20080528 on minor 0
[ 92.295429] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 92.295466] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[ 92.295537] agpgart: Putting AGP V2 device at 0000:03:00.0 into 4x mode
[ 92.902303] [drm] Setting GART location based on new memory map
[ 92.902303] [drm] Loading R100 Microcode
[ 92.902303] [drm] writeback test succeeded in 1 usecs
[ 168.012018] usb 3-2: new high speed USB device using ehci_hcd and address 4
[ 168.155467] usb 3-2: configuration #1 chosen from 1 choice
[ 168.155960] usb 3-2: New USB device found, idVendor=04a9, idProduct=3136
[ 168.155965] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 168.155969] usb 3-2: Product: Canon Digital Camera
[ 168.155971] usb 3-2: Manufacturer: Canon Inc.
[ 168.155973] usb 3-2: SerialNumber: 92179B9A0EAE4FEC9B2C76D13F49E334

...import photographs using gthumb (including a large movie). It
doesn't report any errors but I don't believe that it downloaded the
entire contents of the camera...

[ 220.414084] ehci_hcd 0000:00:02.2: HC died; cleaning up
[ 220.414101] usb 3-2: USB disconnect, address 4

...then when I disconnect the camera...

[ 932.047690] irq 20: nobody cared (try booting with the "irqpoll" option)
[ 932.047690] Pid: 0, comm: swapper Not tainted 2.6.26-1-686 #1
[ 932.047690] [<c015280b>] __report_bad_irq+0x24/0x69
[ 932.047690] [<c0152812>] __report_bad_irq+0x2b/0x69
[ 932.047690] [<c0152a24>] note_interrupt+0x1d4/0x208
[ 932.047690] [<c0151fd2>] handle_IRQ_event+0x23/0x51
[ 932.047690] [<c01530e5>] handle_fasteoi_irq+0x85/0xa4
[ 932.047690] [<c0105f3a>] do_IRQ+0x4d/0x63
[ 932.047690] [<c0102656>] default_idle+0x0/0x53
[ 932.047690] [<c01042a7>] common_interrupt+0x23/0x28
[ 932.047690] [<c0102656>] default_idle+0x0/0x53
[ 932.047690] [<c0114d54>] native_safe_halt+0x2/0x3
[ 932.047690] [<c0102683>] default_idle+0x2d/0x53
[ 932.047690] [<c01025ce>] cpu_idle+0xab/0xcb
[ 932.047690] =======================
[ 932.047690] handlers:
[ 932.047690] [<f096007f>] (usb_hcd_irq+0x0/0x73 [usbcore])
[ 932.047690] [<f0ad5c11>] (ohci_irq_handler+0x0/0x6be [ohci1394])
[ 932.047690] Disabling IRQ #20

** Loaded modules:
Module Size Used by
binfmt_misc 7528 1
radeon 118688 2
drm 65256 3 radeon
nfsd 186704 13
lockd 54248 1 nfsd
nfs_acl 2912 1 nfsd
auth_rpcgss 33952 1 nfsd
sunrpc 162144 11 nfsd,lockd,nfs_acl,auth_rpcgss
exportfs 3904 1 nfsd
ppdev 6468 0
lp 8164 0
autofs4 16420 1
ipt_MASQUERADE 2592 1
ipt_recent 6908 2
nf_conntrack_ipv6 12084 10
xt_state 2016 24
xt_tcpudp 2816 44
ip6t_REJECT 3488 2
ip6t_LOG 5508 8
ipt_LOG 5028 8
ip6table_filter 2432 1
ip6_tables 11376 2 ip6t_LOG,ip6table_filter
iptable_filter 2624 1
ipt_REJECT 2784 2
iptable_nat 4680 1
nf_nat 15576 2 ipt_MASQUERADE,iptable_nat
nf_conntrack_ftp 6852 0
nf_conntrack_ipv4 12268 17 iptable_nat,nf_nat
nf_conntrack 55508 7 ipt_MASQUERADE,nf_conntrack_ipv6,xt_state,iptable_ nat,nf_nat,nf_conntrack_ftp,nf_conntrack_ipv4
ip_tables 10160 2 iptable_filter,iptable_nat
x_tables 13284 11 ipt_MASQUERADE,ipt_recent,xt_state,xt_tcpudp,ip6t_ REJECT,ip6t_LOG,ipt_LOG,ip6_tables,ipt_REJECT,ipta ble_nat,ip_tables
ppp_deflate 4224 0
zlib_deflate 17624 1 ppp_deflate
zlib_inflate 14144 1 ppp_deflate
bsd_comp 4864 0
pppoatm 3680 1
ppp_generic 20028 7 ppp_deflate,bsd_comp,pppoatm
slhc 5408 1 ppp_generic
ipv6 235300 56 nf_conntrack_ipv6,ip6t_REJECT
ext3 105512 1
jbd 39444 1 ext3
mbcache 7108 1 ext3
fuse 42908 1
eeprom 5232 0
w83l785ts 5232 0
asb100 14996 0
hwmon_vid 2720 1 asb100
snd_pcm_oss 32800 0
snd_mixer_oss 12320 1 snd_pcm_oss
psmouse 32336 0
ide_disk 10496 0
ide_cd_mod 27652 0
cdrom 30176 1 ide_cd_mod
ata_generic 4676 0
usbhid 35904 0
hid 33184 1 usbhid
ff_memless 4392 1 usbhid
speedtch 12196 0
usbatm 13792 2 speedtch
atm 32820 4 pppoatm,usbatm
tda1004x 13348 1
snd_cs4232 11380 0
snd_opl3_lib 9344 1 snd_cs4232
snd_hwdep 6212 1 snd_opl3_lib
snd_cs4231_lib 20512 1 snd_cs4232
amd74xx 7752 0 [permanent]
snd_mpu401 6152 0
snd_mpu401_uart 6368 2 snd_cs4232,snd_mpu401
ns558 3712 0
snd_seq_midi 5728 0
snd_seq_midi_event 6432 1 snd_seq_midi
gameport 10700 2 ns558
snd_rawmidi 18496 2 snd_mpu401_uart,snd_seq_midi
parport_pc 22500 1
parport 30988 3 ppdev,lp,parport_pc
budget_ci 14596 0
firmware_class 6816 3 speedtch,tda1004x,budget_ci
budget_core 9252 1 budget_ci
dvb_core 66528 2 budget_ci,budget_core
3c59x 35624 0
saa7146 14984 2 budget_ci,budget_core
mii 4896 1 3c59x
ttpci_eeprom 2240 1 budget_core
floppy 47716 0
ir_common 39620 1 budget_ci
pcspkr 2432 0
ohci1394 24944 0
ide_pci_generic 3908 0 [permanent]
snd_intel8x0 26268 1
ieee1394 75800 1 ohci1394
snd_ac97_codec 88484 1 snd_intel8x0
ide_core 96168 4 ide_disk,ide_cd_mod,amd74xx,ide_pci_generic
ac97_bus 1728 1 snd_ac97_codec
snd_pcm 62596 4 snd_pcm_oss,snd_cs4231_lib,snd_intel8x0,snd_ac97_c odec
snd_seq 41456 2 snd_seq_midi,snd_seq_midi_event
snd_timer 17800 4 snd_opl3_lib,snd_cs4231_lib,snd_pcm,snd_seq
snd_seq_device 6380 4 snd_opl3_lib,snd_seq_midi,snd_rawmidi,snd_seq
forcedeth 45072 0
snd 45604 17 snd_pcm_oss,snd_mixer_oss,snd_cs4232,snd_opl3_lib, snd_hwdep,snd_cs4231_lib,snd_mpu401,snd_mpu401_uar t,snd_rawmidi,snd_intel8x0,snd_ac97_codec,snd_pcm, snd_seq,snd_timer,snd_seq_device
soundcore 6368 1 snd
snd_page_alloc 7816 3 snd_cs4231_lib,snd_intel8x0,snd_pcm
ehci_hcd 28428 0
button 6096 0
ohci_hcd 18500 0
i2c_nforce2 5536 0
usbcore 118160 6 usbhid,speedtch,usbatm,ehci_hcd,ohci_hcd
i2c_core 19828 8 eeprom,w83l785ts,asb100,tda1004x,budget_ci,budget_ core,ttpci_eeprom,i2c_nforce2
nvidia_agp 6108 1
agpgart 28776 2 drm,nvidia_agp
evdev 8000 4
xfs 458072 2
dm_mirror 15104 0
dm_log 8452 1 dm_mirror
dm_snapshot 14340 0
dm_mod 46184 10 dm_mirror,dm_log,dm_snapshot
raid456 117264 1
async_xor 3520 1 raid456
async_memcpy 2304 1 raid456
async_tx 6316 3 raid456,async_xor,async_memcpy
xor 14696 2 raid456,async_xor
raid1 18016 1
md_mod 67036 4 raid456,raid1
sd_mod 22200 9
thermal 15228 0
processor 32576 1 thermal
fan 4164 0
thermal_sys 10856 3 thermal,processor,fan
shpchp 25528 0
pci_hotplug 23460 1 shpchp
sata_sil 7176 6
libata 140384 2 ata_generic,sata_sil
scsi_mod 129356 2 sd_mod,libata
dock 8304 1 libata

** PCI devices:
00:00.0 Host bridge [0600]: nVidia Corporation nForce2 IGP2 [10de:01e0] (rev c1)
Subsystem: ASUSTeK Computer Inc. Device [1043:80ac]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at d8000000 (32-bit, prefetchable) [size=64M]
Capabilities: <access denied>
Kernel driver in use: agpgart-nvidia
Kernel modules: nvidia-agp

00:00.1 RAM memory [0500]: nVidia Corporation nForce2 Memory Controller 1 [10de:01eb] (rev c1)
Subsystem: ASUSTeK Computer Inc. Device [1043:80ac]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:00.2 RAM memory [0500]: nVidia Corporation nForce2 Memory Controller 4 [10de:01ee] (rev c1)
Subsystem: ASUSTeK Computer Inc. Device [1043:80ac]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:00.3 RAM memory [0500]: nVidia Corporation nForce2 Memory Controller 3 [10de:01ed] (rev c1)
Subsystem: ASUSTeK Computer Inc. Device [1043:80ac]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:00.4 RAM memory [0500]: nVidia Corporation nForce2 Memory Controller 2 [10de:01ec] (rev c1)
Subsystem: ASUSTeK Computer Inc. Device [1043:80ac]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:00.5 RAM memory [0500]: nVidia Corporation nForce2 Memory Controller 5 [10de:01ef] (rev c1)
Subsystem: ASUSTeK Computer Inc. Device [1043:80ac]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:01.0 ISA bridge [0601]: nVidia Corporation nForce2 ISA Bridge [10de:0060] (rev a4)
Subsystem: ASUSTeK Computer Inc. A7N8X Mainboard [1043:80ad]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>

00:01.1 SMBus [0c05]: nVidia Corporation nForce2 SMBus (MCP) [10de:0064] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:0c11]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at dc00 [size=32]
Capabilities: <access denied>
Kernel driver in use: nForce2_smbus
Kernel modules: i2c-nforce2

00:02.0 USB Controller [0c03]: nVidia Corporation nForce2 USB Controller [10de:0067] (rev a4) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. A7N8X Mainboard [1043:0c11]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 22
Region 0: Memory at e2087000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd

00:02.1 USB Controller [0c03]: nVidia Corporation nForce2 USB Controller [10de:0067] (rev a4) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. A7N8X Mainboard [1043:0c11]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 21
Region 0: Memory at e2082000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd

00:02.2 USB Controller [0c03]: nVidia Corporation nForce2 USB Controller [10de:0068] (rev a4) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. A7N8X Mainboard [1043:0c11]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin C routed to IRQ 20
Region 0: Memory at e2083000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd

00:04.0 Ethernet controller [0200]: nVidia Corporation nForce2 Ethernet Controller [10de:0066] (rev a1)
Subsystem: ASUSTeK Computer Inc. A7N8X Mainboard onboard nForce2 Ethernet [1043:80a7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 22
Region 0: Memory at e2086000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at e000 [size=8]
Capabilities: <access denied>
Kernel driver in use: forcedeth
Kernel modules: forcedeth

00:05.0 Multimedia audio controller [0401]: nVidia Corporation nForce Audio Processing Unit [10de:006b] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:0c11]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 3000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e2000000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>

00:06.0 Multimedia audio controller [0401]: nVidia Corporation nForce2 AC97 Audio Controler (MCP) [10de:006a] (rev a1)
Subsystem: ASUSTeK Computer Inc. nForce2 AC97 Audio Controler (MCP) [1043:8095]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at e400 [size=256]
Region 1: I/O ports at d000 [size=128]
Region 2: Memory at e2080000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: Intel ICH
Kernel modules: snd-intel8x0

00:08.0 PCI bridge [0604]: nVidia Corporation nForce2 External PCI Bridge [10de:006c] (rev a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 00008000-0000afff
Memory behind bridge: e0000000-e1ffffff
Prefetchable memory behind bridge: 40000000-400fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Kernel modules: shpchp

00:09.0 IDE interface [0101]: nVidia Corporation nForce2 IDE [10de:0065] (rev a2) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. Device [1043:0c11]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
Region 4: I/O ports at f000 [size=16]
Capabilities: <access denied>
Kernel driver in use: AMD_IDE
Kernel modules: amd74xx

00:0c.0 PCI bridge [0604]: nVidia Corporation nForce2 PCI Bridge [10de:006d] (rev a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: dc000000-ddffffff
Prefetchable memory behind bridge: 40100000-401fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR+
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Kernel modules: shpchp

00:0d.0 FireWire (IEEE 1394) [0c00]: nVidia Corporation nForce2 FireWire (IEEE 1394) Controller [10de:006e] (rev a3) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:809a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 20
Region 0: Memory at e2084000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at e2085000 (32-bit, non-prefetchable) [size=64]
Capabilities: <access denied>
Kernel driver in use: ohci1394
Kernel modules: ohci1394

00:1e.0 PCI bridge [0604]: nVidia Corporation nForce2 AGP [10de:01e8] (rev c1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 58
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: de000000-dfffffff
Prefetchable memory behind bridge: d0000000-d7ffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Kernel modules: shpchp

01:08.0 RAID bus controller [0104]: Silicon Image, Inc. SiI 3114 [SATALink/SATARaid] Serial ATA Controller [1095:3114] (rev 02)
Subsystem: Silicon Image, Inc. Device [1095:7114]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 48, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 8000 [size=8]
Region 1: I/O ports at 8400 [size=4]
Region 2: I/O ports at 8800 [size=8]
Region 3: I/O ports at 8c00 [size=4]
Region 4: I/O ports at 9000 [size=16]
Region 5: Memory at e1000000 (32-bit, non-prefetchable) [size=1K]
[virtual] Expansion ROM at 40000000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: sata_sil
Kernel modules: sata_sil

01:0a.0 Multimedia controller [0480]: Philips Semiconductors SAA7146 [1131:7146] (rev 01)
Subsystem: Technotrend Systemtechnik GmbH Technotrend-Budget/Hauppauge WinTV-NOVA-T DVB card [13c2:1011]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 58 (3750ns min, 9500ns max)
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e1001000 (32-bit, non-prefetchable) [size=512]
Kernel driver in use: budget_ci dvb
Kernel modules: budget-ci

01:0b.0 RAID bus controller [0104]: Silicon Image, Inc. SiI 3112 [SATALink/SATARaid] Serial ATA Controller [1095:3112] (rev 02)
Subsystem: Silicon Image, Inc. SiI 3112 SATARaid Controller [1095:6112]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 48, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 9400 [size=8]
Region 1: I/O ports at 9800 [size=4]
Region 2: I/O ports at 9c00 [size=8]
Region 3: I/O ports at a000 [size=4]
Region 4: I/O ports at a400 [size=16]
Region 5: Memory at e1002000 (32-bit, non-prefetchable) [size=512]
[virtual] Expansion ROM at 40080000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: sata_sil
Kernel modules: sata_sil

02:01.0 Ethernet controller [0200]: 3Com Corporation 3C920B-EMB Integrated Fast Ethernet Controller [Tornado] [10b7:9201] (rev 40)
Subsystem: ASUSTeK Computer Inc. A7N8X Deluxe onboard 3C920B-EMB Integrated Fast Ethernet Controller [1043:80ab]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 56 (2500ns min, 2500ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at b000 [size=128]
Region 1: Memory at dd000000 (32-bit, non-prefetchable) [size=128]
[virtual] Expansion ROM at 40100000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: 3c59x
Kernel modules: 3c59x

03:00.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE] [1002:5159] (prog-if 00 [VGA controller])
Subsystem: Info-Tek Corp. Device [18bc:0010]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 58 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at c000 [size=256]
Region 2: Memory at df000000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at de000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel modules: radeonfb

CPU0
0: 66 IO-APIC-edge timer
1: 6765 IO-APIC-edge i8042
3: 4 IO-APIC-edge
4: 3 IO-APIC-edge
6: 3 IO-APIC-edge floppy
7: 0 IO-APIC-edge parport0
8: 2 IO-APIC-edge rtc0
9: 0 IO-APIC-fasteoi acpi
10: 0 IO-APIC-edge MPU401 UART
14: 11533 IO-APIC-edge ide0
15: 0 IO-APIC-edge ide1
16: 31 IO-APIC-fasteoi saa7146 (0)
18: 64688 IO-APIC-fasteoi sata_sil, sata_sil
19: 0 IO-APIC-fasteoi radeon@pci:0000:03:00.0
20: 200004 IO-APIC-fasteoi ehci_hcd:usb3, ohci1394
21: 1834 IO-APIC-fasteoi ohci_hcd:usb2, NVidia nForce2
22: 140648 IO-APIC-fasteoi ohci_hcd:usb1, eth1, eth0
NMI: 0 Non-maskable interrupts
LOC: 80170 Local timer interrupts
RES: 0 Rescheduling interrupts
CAL: 0 function call interrupts
TLB: 0 TLB shootdowns
TRM: 0 Thermal event interrupts
SPU: 0 Spurious interrupts
ERR: 0
MIS: 0



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org