FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 02-28-2009, 11:48 PM
Thibaut VARENE
 
Default Bug#517627: linux-image-2.6.26-1-parisc64-smp: Acenic driver without firmware triggers HPMC

Package: linux-image-2.6.26-1-parisc64-smp
Version: 2.6.26-13
Severity: important

Acenic driver is provided without firmware. When it's being loaded at boot time, it starts complaining that it can't find a firmware to load. Boot progreses for a little while and eventually when setting up networking, the box goes kaboom. Yay.

Relevant lspci output:
10:00.0 Ethernet controller: Alteon Networks Inc. AceNIC Gigabit Ethernet (rev 01)
Subsystem: Hewlett-Packard Company Device 106f
Flags: bus master, 66MHz, medium devsel, latency 128, IRQ 72
Memory at fffffffff9000000 (32-bit, non-prefetchable) [size=16K]
Kernel driver in use: acenic

-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: hppa (parisc64)

Kernel: Linux 2.6.22.19 (SMP w/2 CPU cores)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.26-1-parisc64-smp depends on:
ii debconf [debconf-2.0] 1.5.25 Debian configuration management sy
ii initramfs-tools [linux-initra 0.93 tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo

linux-image-2.6.26-1-parisc64-smp recommends no packages.

Versions of packages linux-image-2.6.26-1-parisc64-smp suggests:
pn linux-doc-2.6.26 <none> (no description available)
ii palo 1.16+nmu1 Linux boot loader for parisc/hppa

-- debconf information:
linux-image-2.6.26-1-parisc64-smp/preinst/lilo-initrd-2.6.26-1-parisc64-smp: true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-1-parisc64-smp/postinst/old-dir-initrd-link-2.6.26-1-parisc64-smp: true
linux-image-2.6.26-1-parisc64-smp/postinst/old-system-map-link-2.6.26-1-parisc64-smp: true
linux-image-2.6.26-1-parisc64-smp/preinst/abort-install-2.6.26-1-parisc64-smp:
linux-image-2.6.26-1-parisc64-smp/postinst/create-kimage-link-2.6.26-1-parisc64-smp: true
linux-image-2.6.26-1-parisc64-smp/postinst/bootloader-test-error-2.6.26-1-parisc64-smp:
linux-image-2.6.26-1-parisc64-smp/preinst/lilo-has-ramdisk:
linux-image-2.6.26-1-parisc64-smp/postinst/kimage-is-a-directory:
linux-image-2.6.26-1-parisc64-smp/preinst/elilo-initrd-2.6.26-1-parisc64-smp: true
* linux-image-2.6.26-1-parisc64-smp/preinst/bootloader-initrd-2.6.26-1-parisc64-smp: false
linux-image-2.6.26-1-parisc64-smp/preinst/failed-to-move-modules-2.6.26-1-parisc64-smp:
linux-image-2.6.26-1-parisc64-smp/postinst/bootloader-error-2.6.26-1-parisc64-smp:
linux-image-2.6.26-1-parisc64-smp/prerm/removing-running-kernel-2.6.26-1-parisc64-smp: true
linux-image-2.6.26-1-parisc64-smp/postinst/depmod-error-2.6.26-1-parisc64-smp: false
linux-image-2.6.26-1-parisc64-smp/postinst/depmod-error-initrd-2.6.26-1-parisc64-smp: false
linux-image-2.6.26-1-parisc64-smp/preinst/already-running-this-2.6.26-1-parisc64-smp:
linux-image-2.6.26-1-parisc64-smp/preinst/overwriting-modules-2.6.26-1-parisc64-smp: true
linux-image-2.6.26-1-parisc64-smp/prerm/would-invalidate-boot-loader-2.6.26-1-parisc64-smp: true
linux-image-2.6.26-1-parisc64-smp/postinst/old-initrd-link-2.6.26-1-parisc64-smp: true
linux-image-2.6.26-1-parisc64-smp/preinst/abort-overwrite-2.6.26-1-parisc64-smp:
linux-image-2.6.26-1-parisc64-smp/preinst/initrd-2.6.26-1-parisc64-smp:



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 
Old 03-01-2009, 12:10 PM
Ben Hutchings
 
Default Bug#517627: linux-image-2.6.26-1-parisc64-smp: Acenic driver without firmware triggers HPMC

On Sun, 2009-03-01 at 01:48 +0100, Thibaut VARENE wrote:
> Package: linux-image-2.6.26-1-parisc64-smp
> Version: 2.6.26-13
> Severity: important
>
> Acenic driver is provided without firmware. When it's being loaded at
> boot time, it starts complaining that it can't find a firmware to
> load. Boot progreses for a little while and eventually when setting up
> networking, the box goes kaboom. Yay.

Can you be more specific?

Meanwhile, I should see about adding the firmware to firmware-nonfree.

Ben.
 
Old 03-01-2009, 01:31 PM
Thibaut VARÈNE
 
Default Bug#517627: linux-image-2.6.26-1-parisc64-smp: Acenic driver without firmware triggers HPMC

Le 1 mars 09 à 14:10, Ben Hutchings a écrit :


On Sun, 2009-03-01 at 01:48 +0100, Thibaut VARENE wrote:

Package: linux-image-2.6.26-1-parisc64-smp
Version: 2.6.26-13
Severity: important

Acenic driver is provided without firmware. When it's being loaded at
boot time, it starts complaining that it can't find a firmware to
load. Boot progreses for a little while and eventually when setting
up

networking, the box goes kaboom. Yay.


Can you be more specific?


Actually it's not an HPMC, it's a plain panic, and jumbo frames
support seems to be the cause. Tried with jumbo frames disabled, the
box didn't panic but the network didn't come up either, i.e.
completely useless driver. Output somewhat garbled by serial console,
tried to reconstruct it as best as I could.


[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-1-parisc64-smp (Debian 2.6.26-13) (waldi@debian.org
) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 SMP
Sat Jan 10 22:22:56 UTC 2009

[ 0.000000] FP[0] enabled: Rev 1 Model 16
[ 0.000000] The 64-bit Kernel has started...
[ 0.000000] console [ttyB0] enabled
[ 0.000000] Initialized PDC Console for debugging.
[ 0.000000] Determining PDC firmware type: 64 bit PAT.
[ 0.000000] model 00005d50 00000491 00000000 00000001 5cbb53d8
100000f0 00000008 000000b2 000000b2

[ 0.000000] vers 00000301
[ 0.000000] CPUID vers 18 rev 11 (0x0000024b)
[ 0.000000] capabilities 0x1
[ 0.000000] model 9000/800/A500-5X
[ 0.000000] Memory Ranges:
[ 0.000000] 0) Start 0x0000000000000000 End 0x00000000efffffff
Size 3840 MB
[ 0.000000] 1) Start 0x00000010f0000000 End 0x00000010ffffffff
Size 256 MB

[ 0.000000] Total Memory: 4096 MB
[ 0.000000] initrd: 7f98c000-7ffede3d
[ 0.000000] initrd: reserving 3f98c000-3ffede3d (mem_max 100000000)
[ 0.000000] SMP: bootstrap CPU ID is 0
[ 0.000000] Built 2 zonelists in Zone order, mobility grouping on.
Total pages: 1034240
[ 0.000000] Kernel command line: root=/dev/sda5 console=ttyS0
TERM=vt102 palo_kernel=2/vmlinux26

[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[17179569.184000] Console: colour dummy device 160x64
[17179569.212000] Dentry cache hash table entries: 524288 (order: 10,
4194304 bytes)
[17179569.244000] Inode-cache hash table entries: 262144 (order: 9,
2097152 bytes)
[17179569.652000] Memory: 4109824k/4194304k available (2820k kernel
code, 83880k reserved, 1287k data, 292k init)

[17179569.660000] virtual kernel memory layout:
[17179569.660000] vmalloc : 0x0000000000008000 -
0x000000003f000000 (1007 MB)
[17179569.660000] memory : 0x0000000040000000 -
0x0000001140000000 (69632 MB)
[17179569.660000] .init : 0x00000000405dc000 -
0x0000000040625000 ( 292 kB)
[17179569.660000] .data : 0x00000000403c1160 -
0x0000000040503000 (1287 kB)
[17179569.660000] .text : 0x0000000040100000 -
0x00000000403c1160 (2820 kB)

[17179570.072000] Security Framework initialized
[17179570.076000] SELinux: Disabled at boot.
[17179570.080000] Capability LSM initialized
[17179570.080000] Mount-cache hash table entries: 256
[17179570.124000] Initializing cgroup subsys ns
[17179570.144000] Initializing cgroup subsys cpuacct
[17179570.148000] Initializing cgroup subsys devices
[17179570.152000] Brought up 1 CPUs
[17179570.384000] net_namespace: 1216 bytes
[17179570.400000] NET: Registered protocol family 16
[17179570.420000] EISA bus registered
[17179570.520000] Searching for devices...
[17179570.828000] Found devices:
[17179570.832000] 1. Crescendo 550 at 0xfffffffffffa0000 [160] { 0,
0x0, 0x5d5, 0x00004 }
[17179570.836000] 2. Crescendo 550 at 0xfffffffffffa2000 [162] { 0,
0x0, 0x5d5, 0x00004 }
[17179570.844000] 3. Memory at 0xfffffffffed08000 [8] { 1, 0x0, 0x09b,
0x00009 }
[17179570.852000] 4. Astro BC Runway Port at 0xfffffffffed00000 [0]
{ 12, 0x0, 0x582, 0x0000b }
[17179570.860000] 5. Elroy PCI Bridge at 0xfffffffffed30000 [0/0]
{ 13, 0x0, 0x782, 0x0000a }
[17179571.096000] 6. Elroy PCI Bridge at 0xfffffffffed34000 [0/2]
{ 13, 0x0, 0x782, 0x0000a }
[17179571.100000] 7. Elroy PCI Bridge at 0xfffffffffed38000 [0/4]
{ 13, 0x0, 0x782, 0x0000a }
[17179571.108000] 8. Elroy PCI Bridge at 0xfffffffffed3c000 [0/6]
{ 13, 0x0, 0x782, 0x0000a }

[17179571.116000] Enabling PDC_PAT chassis codes support v0.05

[snip - serial console garbage]

[17179574.112000] Freeing initrd memory: 6535k freed
[17179574.120000] Chassis warnings not supported.
[17179574.140000] unwind_init: start = 0x4044d0e4, end = 0x40476444,
entries = 10550
[17179574.148000] Performance monitoring counters enabled for
Crescendo 550

[17179574.180000] audit: initializing netlink socket (disabled)
[17179574.212000] type=2000 audit(1235915309.798:1): initialized
[17179574.236000] VFS: Disk quotas dquot_6.5.1
[17179574.256000] Dquot-cache hash table entries: 512 (order 0, 4096
bytes)

[17179574.280000] msgmni has been set to 8040
[17179574.300000] Block layer SCSI generic (bsg) driver version 0.4
loaded (major 254)

[17179574.324000] io scheduler noop registered
[17179574.328000] io scheduler anticipatory registered
[17179574.368000] io scheduler deadline registered
[17179574.388000] io scheduler cfq registered (default)
[17179574.408000] PDC Stable Storage facility v0.30
[17179575.012000] STI GSC/PCI core graphics driver Version 0.9a
[17179575.032000] Generic RTC Driver v1.07
[17179575.048000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports,
IRQ sharing enabled

[17179575.072000] serial 0000:00:04.0: enabling device (0146 -> 0147)
[17179575.096000] 0000:00:04.0: ttyS0 at MMIO 0xfffffffff8000000 (irq
= 70) is a 16550A

[17179575.120000] console handover: boot [ttyB0] -> real [ttyS0]
[17179575.144000] 0000:00:04.0: ttyS1 at MMIO 0xfffffffff8000008 (irq
= 70) is a 16550A
[17179575.184000] 0000:00:04.0: ttyS2 at MMIO 0xfffffffff8000010 (irq
= 70) is a 16550A

[17179575.212000] serial 0000:00:05.0: enabling device (0000 -> 0003)
[17179575.236000] serial 0000:00:05.0: enabling SERR and PARITY (0003 -
> 0143)
[17179575.308000] 0000:00:05.0: ttyS3 at MMIO 0xfffffffff8005000 (irq
= 71) is a 16550A

[17179575.332000] Couldn't register serial port 0000:00:05.0: -28
[17179575.456000] brd: module loaded
[17179575.584000] mice: PS/2 mouse device common for all mice
[17179575.604000] TCP cubic registered
[17179575.624000] NET: Registered protocol family 17
[17179575.628000] registered taskstats version 1
[17179575.728000] Freeing unused kernel memory: <0>------------[ cut
here ]------------

[17179575.884000] Badness at arch/parisc/kernel/smp.c:323
[17179575.892000]
[17179575.892000] YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
[17179575.896000] PSW: 00001000000001101111111100001110 Not tainted
[17179575.904000] r00-03 000000ff0806ff0e 00000000405d06a0
000000004012550c 00000000405b0f20
[17179575.908000] r04-07 00000000405c96a0 000000004047f970
0000000000000000 0000000000000001
[17179575.916000] r08-11 000001 0000000000000000 000000000804000e
0000000000000000
[17179576.300000] r12-15 000000012fc5eb18 00000000401692c0
00000000000000f0 00000000000000ff
[17179576.308000] r16-19 00000000f00003b0 00000000f000024c
00000000f0002b4c 0f0f0f0f0f0f0f0f
[17179576.316000] r20-23 0000000000000000 0000000040625000
00000000405c6020 0000000000000001
[17179576.324000] r24-27 0000000000000001 0000000000000000
0000000000000003 00000000405c96a0
[17179576.344000800000e 000000012fc604c0 000000012fc604f0
0000000000000000
[17179576.864000] sr00-03 0000000000000000 0000000000000000
0000000000000000 0000000000000000
[17179576.872000] sr04-07 0000000000000000 0000000000000000
0000000000000000 0000000000000000

[17179576.880000]
[17179576.880000] IASQ: 0000000000000000 0000000000000000 IAOQ:
000000004012551c 0000000040125520
[17179576.888000] IIR: 03ffe01f ISR: 0000000000000000 IOR:
00000000000000577.192000] CPU: 0 CR30: 000000012fc60000
CR31: 000000004065c000

[17179577.288000] ORIG_R28: ffffffffffffffff
[17179577.292000] IAOQ[0]: smp_call_function+0x5c/0x348
[17179577.296000] IAOQ[1]: smp_call_function+0x60/0x348
[17179577.300000] RP(r2): smp_call_function+0x4c/0x348
[17179577.304000] Backtrace:
[17179577.308000] [<0000000040154610>] on_each_cpu+0x28/0x68
[17179577.312000] [<0000000040119fd8>] flush_data_cache+0x280000]
[<0000000040119290>] free_initmem+0x68/0x2d0

[17179577.848000] [<00000000401187e0>] init_post+0x18/0x1a8
[17179577.856000] [<00000000405dca1c>] kernel_init+0x444/0x478
[17179577.860000]

[again]

17179579.456000] SCSI subsystem initialized
[17179579.504000] sym53c8xx 0000:00:01.0: enabling device (0000 -> 0003)
[17179579.512000] sym53c8xx 0000:00:01.0: enabling SERR and PARITY
(0003 -> 0143)

[17179579.592000] sym0: <896> rev 0x7 at pci 0000:00:01.0 irq 67
[17179579.600000] Linux Tulip driver version 1.1.15-NAPI (Feb 27, 2007)
[17179579.632000] sym0: PA-RISC Firmware, ID 7, Fast-40, LVD, parity
checking

[17179579.656000] sym0: SCSI BUS has been reset.
[17179579.672000] scsi0 : sym-2.2.3
[17179579.688000] tulip 0000:00:00.0: enabling device (0140 -> 0143)
[17179579.708000] tulip0: no phy info, aborting mtable build
[17179579.732000] tulip0: MII transceiver #1 config 1000 status 782d
advertising 0061.
[17179579.764000] eth0: Digital DS21142/43 Tulip rev 65 at MMIO
0xfffffffff8006000, 00:30:6e:0c:8a:8f, IRQ 66.

[17179579.784000] sym53c8xx 0000:00:01.1: enabling device (0146 -> 0147)
[17179579.860000] sym1: <896> rev 0x7 at pci 0000:00:01.1 irq 68
[17179579.868000] sym1: PA-RISC Firmware, ID 7, Fast-40, SE, parity
checking

[17179580.008000] sym1: SCSI BUS has been reset.
[17179580.024000] sym1: SCSI BUS mode change from SE to SE.
[17179580.024000] scsi1 : sym-2.2.3
[17179580.148000] sym1: SCSI BUS has been reset.
[17179580.172000] sym53c8xx 0000:00:02.0: enabling device (0000 -> 0003)
[17179580.284000] sym53c8xx 0000:00:02.0: enabling SERR and PARITY
(0003 -> 0143)

[17179580.356000] sym2: <875> rev 0x14 at pci 0000:00:02.0 irq 68
[17179580.512000] sym2: PA-RISC Firmware, ID 7, Fast-20, SE, parity
checking

[17179580.524000] sym2: SCSI BUS has been reset.
[17179580.564000] scsi2 : sym-2.2.3
[17179580.568000] sym53c8xx 0000:00:02.1: enabling device (0000 -> 0003)
[17179580.704000] sym53c8xx 0000:00:02.1: enabling SERR and PARITY
(0003 -> 0143)

[17179580.780000] sym3: <875> rev 0x14 at pci 0000:00:02.1 irq 69
[17179580.932000] sym3: PA-RISC Firmware, ID 7, Fast-20, SE, parity
checking

[17179580.996000] sym3: SCSI BUS has been reset.
[17179581.008000] scsi3 : sym-2.2.3
[17179581.040000] udev: renamed network interface eth0 to eth1
done.
Begin: Mounting root file system ... Begin: Running /scripts/local-
top ... done.
Begin: Waiting for root file system ... [17179587.788000] scsi
1:0:15:0: Direct-Access SEAGATE ST39103LC HP02 PQ: 0 ANSI: 2
[17179587.796000] target1:0:15: tagged command queuing enabled,
command queue depth 16.

[17179587.828000] target1:0:15: Beginning Domain Validation
[17179587.852000] target1:0:15: asynchronous
[17179587.880000] target1:0:15: wide asynchronous
[17179587.896000] target1:0:15: FAST-20 WIDE SCSI 40.0 MB/s ST (50
ns, offset 15)

[17179587.916000] target1:0:15: Domain Validation skipping write tests
[17179587.952000] target1:0:15: Ending Domain Validation
[17179588.032000] Driver 'sd' needs updating - please use bus_type
methods
[17179588.048000] sd 1:0:15:0: [sda] 17783112 512-byte hardware
sectors (9105 MB)

[17179588.064000] sd 1:0:15:0: [sda] Write Protect is off
[17179588.100000] sd 1:0:15:0: [sda] Write cache: enabled, read cache:
enabled, supports DPO and FUA
[17179588.124000] sd 1:0:15:0: [sda] 17783112 512-byte hardware
sectors (9105 MB)
[17179588.228000] scsi 3:0:15:0: Direct-Access HP 73.4G
ST373453LC HPC4 PQ: 0 ANSI: 3

[17179588.228000] sd 1:0:15:0: [sda] Write Protect is off
[17179588.228000] sd 1:0:15:0: [sda] Write cache: enabled, read cache:
enabled, supports DPO and FUA

[17179588.228000] sda: sda1 sda2 sda3 sda4 < sda5 >
[17179588.268000:0:15: tagged command queuing enabled, command queue
depth 16.

[17179588.268000] sd 1:0:15:0: [sda] Attached SCSI disk
[17179588.656000] target3:0:15: Beginning Domain Validation
[17179588.788000] target3:0:15: asynchronous
[17179588.816000] target3:0:15: wide asynchronous
[17179588.932000] target3:0:15: FAST-20 WIDE SCSI 40.0 MB/s ST (50
ns, offset 16)

[17179588.952000] target3:0:15: Domain Validation skipping write tests
[17179589.068000] target3:0:15: Ending Domain Validation
[17179589.108000] sd 3:0:15:0: [sdb] 143374738 512-byte hardware
sectors (73408 MB)

[17179589.228000] sd 3:0:15:0: [sdb] Write Protect is off
[17179589.236000] sd 3:0:15:0: [sdb] Write cache: enabled, read cache:
enabled, supports DPO and FUA
[17179589.364000] sd 3:0:15:0: [sdb] 143374738 512-byte hardware
sectors (73408 MB)

[17179589.496000] sd 3:0:15:0: [sdb] Write Protect is off
[17179589.520000] sd 3:0:15:0: [sdb] Write cache: enabled, read cache:
enabled, supports DPO and FUA

[17179589.632000] sdb: sdb1
[17179589.784000] sd 3:0:15:0: [sdb] Attached SCSI disk
done.
Begin: Running /scripts/local-premount ... done.
[17179590.364000] kjournald starting. Commit interval 5 seconds
[17179590.368000] EXT3-fs: mounted filesystem with ordered data mode.
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... done.
INIT: version 2.86 booting
Setting hostname to 'mkhppa3'...done.
Starting the hotplug events dispatcher: done.
Waiting for /dev to be fully populated...
acenic: v0.92 08/05/2002 Jes Sorensen, linux-acenic@SunSITE.dk
[17179651.420000] http://home.cern.ch/~jes/gige/acenic.html
[17179651.816000] acenic 0000:10:00.0: enabling device (0000 -> 0002)
[17179651.944000] acenic 0000:10:00.0: enabling SERR and PARITY (0002 -
> 0142)
[17179651.952000] 0000:10:00.0: Alteon AceNIC Ethernet at
0xfffffffff9000000, irq 72
[17179652.236000] Tigon II (Rev. 6), Firmware: 0.0.0, 40:30:6e:
04:80:68
[17179652.360000] PCI bus width: 64 bits, speed: 66MHz, latency: 128
clks

[17179652.368000] firmware: requesting acenic_tg2.bin
[17179652.620000] 0000:10:00.0: Failed to load firmware "acenic_tg2.bin"
Setting parameters of disc: (none).
Setting the system clock.
System Clock set to: Sun Mar 1 13:49:52 UTC 2009.
Activating swap:swapon on /dev/sda3
[17179656.808000] Adding 976888k swap on /dev/sda3. Priority:-1
extents:1 across:976888k

.
Will now check root file system:fsck 1.41.3 (12-Oct-2008)
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/sda5
/dev/sda5: clean, 122072/963840 files, 605175/1939452 blocks
.
[17179657.216000] EXT3 FS on sda5, internal journal
Setting the system clock.
System Clock set to: Sun Mar 1 13:49:54 UTC 2009.
Cleaning up ifupdown....
Loading device-mapper support[17179659.644000] device-mapper: uevent:
version 1.0.3
[17179659.652000] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18)
initialised: dm-devel@redhat.com

.
Will now check all file systems.
fsck 1.41.3 (12-Oct-2008)
Checking all file systems.
[/sbin/fsck.reiserfs (1) -- /home] fsck.reiserfs -a /dev/sdb1
[/sbin/fsck.ext3 (2) -- /boot] fsck.ext3 -a -C0 /dev/sda2
/dev/sda2: clean, 38/31232 files, 85213/124928 blocks
Replaying journal..
Reiserfs journal '/dev/sdb1' in blocks [18..8211]: 0 transactions
replayed

Checking internal tree..finished
home: Reiserfs super block in block 16 on 0x7efefeff of format 3.6
with standard journal

Blocks (total/free): 17920496/17066277 by 4096 bytes
Filesystem is clean
home: Reiserfs super block in block 16 on 0x7efefeff of format 3.6
with standard journal

Blocks (total/free): 17920496/17066277 by 4096 bytes
Filesystem is clean
Done checking file systems. A log is being saved in /var/log/fsck/
checkfs if that location is writable..

Setting kernel variables (/etc/sysctl.conf)...done.
Will now mount local filesystems:[17179669.716000] ReiserFS: sdb1:
found reiserfs format "3.6" with standard journal

[17179669.724000] ReiserFS: sdb1: using ordered data mode
[17179669.760000] ReiserFS: sdb1: journal params: device sdb1, size
8192, journal first block 18, max trans len 1024, max batch 900, max
commit age 30, max trans age 30

[17179669.788000] ReiserFS: sdb1: checking transaction log (sdb1)
[17179669.824000] ReiserFS: sdb1: Using r5 hash to sort names
[17179669.884000] kjournald starting. Commit interval 5 seconds
[17179669.888000] EXT3-fs: mounted filesystem with ordered data mode.
.
Will now activate swapfile swap:done.
Cleaning /tmp...done.
Cleaning /var/run...done.
Cleaning /var/lock...done.
Checking minimum space in /tmp...done.
Setting up networking....
Configuring network interfaces...[17179672.028000] eth0: Firmware not
running!

SIOCSIFFLAGS: De[17179672.036000] eth0: Enabling Jumbo frame support
vice or resource busy
[17179672.056000] Backtrace:
[17179672.056000] [<0000000008119d68>] ace_change_mtu+0xf8/0x228
[acenic]

[17179672.056000] [<0000000040330f40>] dev_set_mtu+0x50/0xa0
[17179672.056000] [<00000000403322ec>] dev_ifsioc+0xe4/0x308
[17179672.056000] [<0000000040332c70>] dev_ioctl+0x760/0x890
[17179672.056000] [<000000004031db54>] sock_ioctl+0x31c/0x340
[17179672.056000] [<00000000401dd44c>] vfs_ioctl+0x4c/0xe0
[17179672.056000] [<00000000401dd868>] do_vfs_ioctl+0x388/0x3c0
[17179672.056000] [<00000000401dd930>] sys_ioctl+0x90/0xd8
[17179672.056000] [<0000000040216228>] dev_ifsioc+0x1d8/0x410
[17179672.056000] [<0000000040215bc8>] compat_sys_ioctl+0x3e8/0x480
[17179672.056000] [<0000000040104ef8>] syscall_exit+0x0/0x14
[17179672.056000]
[17179672.056000]
[17179672.056000] Kernel Fault: Code=26 regs=000000012eb50970
(Addr=0000000000000004)

[17179672.056000]
[17179672.056000] YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
[17179672.056000] PSW: 00001000000001101111111100001111 Tainted:
G W
[17179672.056000] r00-03 000000ff0806ff0f 00000000405caea0
0000000008118048 000000012fd15580
[17179672.056000] r04-07 0000000008113000 0000000000004000
00000000405af000 000000012f4e9680
[17179672.056000] r08-11 0000000000000000 0000000008108000
0000000000000000 0000000000000030
[17179672.056000] r12-15 0000000000020dfc 0000000000021108
0000000000020a7c 000000000001d480
[17179672.056000] r16-19 000000000001d488 000000000001d498
0000000000021860 0000000000000000
[17179672.056000] r20-23 0000000000007000 0000000040565198
ffffffffc0000000 0000000000100000
[17179672.056000] r24-27 00000000000036d0 000000000800000f
000000012fcc04e0 0000000008113000
[17179672.056000] r28-31 00000000036d0002 000000012eb509f0
000000012eb50970 0000000000000000
[17179672.056000] sr00-03 0000000000317800 0000000000000000
0000000000000000 0000000000317800
[17179672.056000] sr04-07 0000000000000000 0000000000000000
0000000000000000 0000000000000000

[17179672.056000]
[17179672.056000] IASQ: 0000000000000000 0000000000000000 IAOQ:
0000000008118080 0000000008118084
[17179672.056000] IIR: 0ffc1288 ISR: 0000000000000000 IOR:
0000000000000004
[17179672.056000] CPU: 0 CR30: 000000012eb50000 CR31:
000000004065c000

[17179672.056000] ORIG_R28: 00000000000000f0
[17179672.056000] IAOQ[0]: ace_load_jumbo_rx_ring+0x210/0x3e0 [acenic]
[17179672.056000] IAOQ[1]: ace_load_jumbo_rx_ring+0x214/0x3e0 [acenic]
[17179672.056000] RP(r2): ace_load_jumbo_rx_ring+0x1d8/0x3e0 [acenic]
[17179672.056000] Backtrace:
[17179672.056000] [<0000000008119d68>] ace_change_mtu+0xf8/0x228
[acenic]

[17179672.056000] [<0000000040330f40>] dev_set_mtu+0x50/0xa0
[17179672.056000] [<00000000403322ec>] dev_ifsioc+0xe4/0x308
[17179672.056000] [<0000000040332c70>] dev_ioctl+0x760/0x890
[17179672.056000] [<000000004031db54>] sock_ioctl+0x31c/0x340
[17179672.056000] [<00000000401dd44c>] vfs_ioctl+0x4c/0xe0
[17179672.056000] [<00000000401dd868>] do_vfs_ioctl+0x388/0x3c0
[17179672.056000] [<00000000401dd930>] sys_ioctl+0x90/0xd8
[17179672.056000] [<0000000040216228>] dev_ifsioc+0x1d8/0x410
[17179672.056000] [<0000000040215bc8>] compat_sys_ioctl+0x3e8/0x480
[17179672.056000] [<0000000040104ef8>] syscall_exit+0x0/0x14
[17179672.056000]
[17179672.056000] Kernel panic - not syncing: Kernel Fault




********** VIRTUAL FRONT PANEL **********
System Boot detected
*****************************************
LEDs: RUN ATTENTION FAULT REMOTE POWER
ON FLASH FLASH ON ON
LED State: System Running. Unexpected Reboot. Non-critical Error
Detected.

Check Chassis and Console Logs for error messages.

processor system panic 1B00

*****************************************

************ EARLY BOOT VFP *************
End of early boot detected
*****************************************

********** VIRTUAL FRONT PANEL **********
System Boot detected
*****************************************
LEDs: RUN ATTENTION FAULT REMOTE POWER
ON FLASH FLASH ON ON
LED State: System Running. Unexpected Reboot. Non-critical Error
Detected.

Check Chassis and Console Logs for error messages.

processor system panic 1B00


With jumb disabled:

Configuring network interfaces...[17179671.856000] eth0: Firmware not
running!

SIOCSIFFLAGS: De[17179671.864000] eth0: Firmware not running!
vice or resource busy
SIOCSIFFLAGS: Device or resource busy
Failed to bring up eth0.
done.


--
Thibaut VARÈNE
http://www.parisc-linux.org/~varenet/




--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 
Old 02-14-2010, 11:43 PM
Moritz Muehlenhoff
 
Default Bug#517627: linux-image-2.6.26-1-parisc64-smp: Acenic driver without firmware triggers HPMC

On Sun, Mar 01, 2009 at 01:10:29PM +0000, Ben Hutchings wrote:
> On Sun, 2009-03-01 at 01:48 +0100, Thibaut VARENE wrote:
> > Package: linux-image-2.6.26-1-parisc64-smp
> > Version: 2.6.26-13
> > Severity: important
> >
> > Acenic driver is provided without firmware. When it's being loaded at
> > boot time, it starts complaining that it can't find a firmware to
> > load. Boot progreses for a little while and eventually when setting up
> > networking, the box goes kaboom. Yay.
>
> Can you be more specific?
>
> Meanwhile, I should see about adding the firmware to firmware-nonfree.

This doesn't seem to have happened yet, did the firmware turn out to
be non-distributable?

Cheers,
Moritz



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20100215004327.GA11248@galadriel.inutil.org">http://lists.debian.org/20100215004327.GA11248@galadriel.inutil.org
 
Old 02-15-2010, 12:18 AM
Ben Hutchings
 
Default Bug#517627: linux-image-2.6.26-1-parisc64-smp: Acenic driver without firmware triggers HPMC

On Mon, 2010-02-15 at 01:43 +0100, Moritz Muehlenhoff wrote:
> On Sun, Mar 01, 2009 at 01:10:29PM +0000, Ben Hutchings wrote:
> > On Sun, 2009-03-01 at 01:48 +0100, Thibaut VARENE wrote:
> > > Package: linux-image-2.6.26-1-parisc64-smp
> > > Version: 2.6.26-13
> > > Severity: important
> > >
> > > Acenic driver is provided without firmware. When it's being loaded at
> > > boot time, it starts complaining that it can't find a firmware to
> > > load. Boot progreses for a little while and eventually when setting up
> > > networking, the box goes kaboom. Yay.
> >
> > Can you be more specific?
> >
> > Meanwhile, I should see about adding the firmware to firmware-nonfree.
>
> This doesn't seem to have happened yet, did the firmware turn out to
> be non-distributable?

The information provided by upstream is:
> Driver: acenic -- Alteon AceNIC Gigabit Ethernet card
>
> File: acenic/tg1.bin
> File: acenic/tg2.bin
>
> Licence: Unknown
>
> Found in hex form in kernel source, but source allegedly available at
> http://alteon.shareable.org/

The essential subdirectories of <http://alteon.shareable.org/> are
currently inaccessible, but this is probably a misconfiguration. I'll
try emailing the site owner.

Ben.

--
Ben Hutchings
It is easier to change the specification to fit the program than vice versa.
 

Thread Tools




All times are GMT. The time now is 12:39 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright ©2007 - 2008, www.linux-archive.org