FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 02-26-2009, 11:14 PM
Tzvetan Mikov
 
Default Bug#517330: linux-image-2.6.26-1-686: ide-tape hangs for 180s on boot and disables the cdrom

Package: linux-image-2.6.26-1-686
Version: 2.6.26-13
Severity: normal

Upgrade from Etch to Lenny. The computer has an IDE tape attached to
hdd (slave). The cdrom is at hdc (master). It all worked fine under
2.6.18.

Under 2.6.26 ide-tape hangs during boot at:
"[ 5.776016] ide-tape: hdd <-> ht0: Seagate STT3401A rev 3"
After about 180 seconds the boot continues somehow, but as I understand
it, the cdrom task is still frozen, so the tape and more importantly the
CDROM are not working.

So, the problem is threefold:
- long delay on boot
- tape no longer working
- cdrom no longer working

I found a report on LKML that looks to be describing exactly the same
problem:
http://lkml.org/lkml/2008/9/21/148

The situation is dire since we have this same tape drive on many systems
and so far I haven't found a way to at least disable it via any
configuration means. The "hdd=none" boot parameter has no efect.
Blacklisting ide_tape in modprobe.d also doesn't affect it.


-- Package-specific info:
** Version:
Linux version 2.6.26-1-686 (Debian 2.6.26-13) (waldi@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 SMP Sat Jan 10 18:29:31 UTC 2009

** Command line:
root=LABEL=rootfs ro vga=0x305 8250.nr_uarts=9

** Not tainted

** Kernel log:
[ 2.410582] usb usb2: configuration #1 chosen from 1 choice
[ 2.412845] hub 2-0:1.0: USB hub found
[ 2.415091] hub 2-0:1.0: 2 ports detected
[ 2.456241] Floppy drive(s): fd0 is 1.44M
[ 2.478397] FDC 0 is a post-1991 82077
[ 2.516282] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.518527] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.520761] usb usb2: Product: UHCI Host Controller
[ 2.522950] usb usb2: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
[ 2.525142] usb usb2: SerialNumber: 0000:00:10.0
[ 2.527420] ACPI: PCI Interrupt 0000:00:10.1[b] -> GSI 21 (level, low) -> IRQ 21
[ 2.529709] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 2.532038] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 2.534413] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000a400
[ 2.538466] usb usb3: configuration #1 chosen from 1 choice
[ 2.540720] hub 3-0:1.0: USB hub found
[ 2.543069] hub 3-0:1.0: 2 ports detected
[ 2.644172] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.646549] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.648873] usb usb3: Product: UHCI Host Controller
[ 2.651165] usb usb3: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
[ 2.653450] usb usb3: SerialNumber: 0000:00:10.1
[ 2.657725] ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 21
[ 2.660005] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 2.662296] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[ 2.664611] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000a000
[ 2.665589] usb usb4: configuration #1 chosen from 1 choice
[ 2.667911] hub 4-0:1.0: USB hub found
[ 2.670168] hub 4-0:1.0: 2 ports detected
[ 2.776188] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.778473] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.780693] usb usb4: Product: UHCI Host Controller
[ 2.782877] usb usb4: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
[ 2.785055] usb usb4: SerialNumber: 0000:00:10.2
[ 2.787354] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 2.789954] eth0: VIA Rhine II at 0x19400, 00:0e:a6:b8:91:84, IRQ 23.
[ 2.794300] eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
[ 2.803777] Uniform Multi-Platform E-IDE driver
[ 2.806110] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 2.812074] VP_IDE: IDE controller (0x1106:0x0571 rev 0x06) at PCI slot 0000:00:11.1
[ 2.814501] ACPI: Unable to derive IRQ for device 0000:00:11.1
[ 2.816814] VP_IDE: not 100% native mode: will probe irqs later
[ 2.819162] VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
[ 2.821912] ide0: BM-DMA at 0x9800-0x9807
[ 2.824239] ide1: BM-DMA at 0x9808-0x980f
[ 2.826545] Probing IDE interface ide0...
[ 3.240096] hda: WDC WD1200JB-00EVA0, ATA DISK drive
[ 3.912080] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 3.913187] hda: UDMA/100 mode selected
[ 3.916633] Probing IDE interface ide1...
[ 4.780100] hdc: Memorex DVD+/-DLRWL1 F16, ATAPI CD/DVD-ROM drive
[ 5.564140] hdd: Seagate STT3401A, ATAPI TAPE drive
[ 5.620069] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 5.620335] hdc: UDMA/66 mode selected
[ 5.622922] hdd: host max PIO5 wanted PIO255(auto-tune) selected PIO3
[ 5.625667] hdd: host max PIO5 wanted PIO255(auto-tune) selected PIO3
[ 5.628403] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 5.644002] ide1 at 0x170-0x177,0x376 on irq 15
[ 5.697874] hda: max request size: 512KiB
[ 5.703864] hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63
[ 5.710487] hda: cache flushes supported
[ 5.712016] hda: hda1 hda2 < hda5 hda6 > hda3
[ 5.756931] hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
[ 5.761248] Uniform CD-ROM driver Revision: 3.20
[ 5.776016] ide-tape: hdd <-> ht0: Seagate STT3401A rev 310B��ps��185.850364] PM: Starting manual resume from disk
[ 185.908007] kjournald starting. Commit interval 5 seconds
[ 185.912658] EXT3-fs: mounted filesystem with ordered data mode.
[ 187.562278] udevd version 125 started
[ 188.890470] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 188.901555] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 188.911874] Linux agpgart interface v0.103
[ 188.939322] agpgart: Detected VIA KT400/KT400A/KT600 chipset
[ 188.945033] agpgart: AGP aperture is 64M @ 0xf8000000
[ 189.116136] input: Power Button (FF) as /class/input/input1
[ 189.154652] ACPI: Power Button (FF) [PWRF]
[ 189.157034] input: Power Button (CM) as /class/input/input2
[ 189.187794] ACPI: Power Button (CM) [PWRB]
[ 190.152526] NET: Registered protocol family 23
[ 190.388315] input: PC Speaker as /class/input/input3
[ 190.876705] gameport: NS558 PnP Gameport is pnp00:0d/gameport0, io 0x200, speed 1147kHz
[ 191.095390] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 22
[ 191.102113] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 191.614453] codec_read: codec 0 is not valid [0x107e5370]
[ 191.623832] codec_read: codec 0 is not valid [0x107e5370]
[ 191.632001] codec_read: codec 0 is not valid [0x107e5370]
[ 191.642022] codec_read: codec 0 is not valid [0x107e5370]
[ 191.905146] input: ImPS/2 Generic Wheel Mouse as /class/input/input4
[ 191.937528] parport_pc 00:09: reported by Plug and Play ACPI
[ 191.939840] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 368.589015] Adding 1550232k swap on /dev/hda6. Priority:-1 extents:1 across:1550232k
[ 368.971159] EXT3 FS on hda3, internal journal
[ 369.250898] loop: module loaded
[ 369.343604] device-mapper: uevent: version 1.0.3
[ 369.345924] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
[ 369.659783] fuse init (API version 7.9)
[ 371.331798] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 379.836334] lp0: using parport0 (interrupt-driven).
[ 379.869719] ppdev: user-space parallel port driver
[ 905.776011] hdd: lost interrupt

** Loaded modules:
Module Size Used by
binfmt_misc 7528 1
inet_diag 8392 1
battery 10180 0
ppdev 6468 0
lp 8164 0
fuse 42908 1
dm_snapshot 14340 0
dm_mirror 15104 0
dm_log 8452 1 dm_mirror
dm_mod 46184 3 dm_snapshot,dm_mirror,dm_log
loop 12748 0
snd_via82xx 20664 0
snd_ac97_codec 88484 1 snd_via82xx
ac97_bus 1728 1 snd_ac97_codec
snd_pcm_oss 32800 0
snd_mixer_oss 12320 1 snd_pcm_oss
snd_pcm 62596 3 snd_via82xx,snd_ac97_codec,snd_pcm_oss
snd_page_alloc 7816 2 snd_via82xx,snd_pcm
snd_mpu401_uart 6368 1 snd_via82xx
ns558 3712 0
gameport 10700 3 snd_via82xx,ns558
snd_seq_dummy 2660 0
parport_pc 22500 1
parport 30988 3 ppdev,lp,parport_pc
snd_seq_oss 24992 0
psmouse 32336 0
snd_seq_midi 5728 0
serio_raw 4740 0
snd_rawmidi 18496 2 snd_mpu401_uart,snd_seq_midi
snd_seq_midi_event 6432 2 snd_seq_oss,snd_seq_midi
snd_seq 41456 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_mid i_event
pcspkr 2432 0
snd_timer 17800 2 snd_pcm,snd_seq
snd_seq_device 6380 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi ,snd_seq
i2c_viapro 6836 0
i2c_core 19828 1 i2c_viapro
snd 45604 11 snd_via82xx,snd_ac97_codec,snd_pcm_oss,snd_mixer_o ss,snd_pcm,snd_mpu401_uart,snd_seq_oss,snd_rawmidi ,snd_seq,snd_timer,snd_seq_device
soundcore 6368 1 snd
via_ircc 15732 0
irda 95480 1 via_ircc
crc_ccitt 2080 1 irda
button 6096 0
via_agp 7744 1
agpgart 28776 1 via_agp
shpchp 25528 0
pci_hotplug 23460 1 shpchp
evdev 8000 3
ext3 105512 1
jbd 39444 1 ext3
mbcache 7108 1 ext3
ide_tape 21562 1
ide_cd_mod 27652 2
cdrom 30176 1 ide_cd_mod
ide_disk 10496 3
via82cxxx 6948 0 [permanent]
ide_pci_generic 3908 0 [permanent]
ide_core 96168 5 ide_tape,ide_cd_mod,ide_disk,via82cxxx,ide_pci_gen eric
floppy 47716 0
ata_generic 4676 0
via_rhine 18664 0
mii 4896 1 via_rhine
libata 140384 1 ata_generic
scsi_mod 129356 1 libata
dock 8304 1 libata
uhci_hcd 18672 0
ehci_hcd 28428 0
usbcore 118160 3 uhci_hcd,ehci_hcd
thermal 15228 0
processor 32576 1 thermal
fan 4164 0
thermal_sys 10856 3 thermal,processor,fan

** PCI devices:
00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge [1106:3189]
Subsystem: ASUSTeK Computer Inc. A7V8X motherboard [1043:807f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: <access denied>
Kernel driver in use: agpgart-via
Kernel modules: via-agp

00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8235 PCI Bridge [1106:b168] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: ee000000-efefffff
Prefetchable memory behind bridge: eff00000-f7ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel modules: shpchp

00:0e.0 Serial controller [0700]: NetMos Technology PCI 9835 Multi-I/O Controller [9710:9835] (rev 01) (prog-if 02 [16550])
Subsystem: LSI Logic / Symbios Logic 2S (16C550 UART) [1000:0002]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at d800 [size=8]
Region 1: I/O ports at d400 [size=8]
Region 2: I/O ports at d000 [size=8]
Region 3: I/O ports at b800 [size=8]
Region 4: I/O ports at b400 [size=8]
Region 5: I/O ports at b000 [size=16]
Kernel driver in use: serial
Kernel modules: parport_serial

00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 80) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. A7V8X-X motherboard [1043:80a1]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 21
Region 4: I/O ports at a800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 80) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. A7V8X-X motherboard [1043:80a1]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at a400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:10.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 80) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. A7V8X-X motherboard [1043:80a1]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 21
Region 4: I/O ports at a000 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:10.3 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 82) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. A7V8X-X motherboard rev 1.01 [1043:80a1]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 21
Region 0: Memory at ed800000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd

00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8235 ISA Bridge [1106:3177]
Subsystem: ASUSTeK Computer Inc. A7V8X-X motherboard [1043:80a1]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: i2c-viapro, via-ircc

00:11.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. A7V8X-X motherboard rev. 1.01 [1043:80a1]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 255
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at 9800 [size=16]
Capabilities: <access denied>
Kernel driver in use: VIA_IDE
Kernel modules: via82cxxx

00:11.5 Multimedia audio controller [0401]: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller [1106:3059] (rev 50)
Subsystem: ASUSTeK Computer Inc. A7V8X-X Motherboard [1043:80a1]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 22
Region 0: I/O ports at e000 [size=256]
Capabilities: <access denied>
Kernel driver in use: VIA 82xx Audio
Kernel modules: snd-via82xx

00:12.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6102 [Rhine-II] [1106:3065] (rev 74)
Subsystem: ASUSTeK Computer Inc. A7V8X-X Motherboard [1043:80a1]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (750ns min, 2000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 23
Region 0: I/O ports at 9400 [size=256]
Region 1: Memory at ed000000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: via-rhine
Kernel modules: via-rhine

00:13.0 Serial controller [0700]: NetMos Technology PCI 9835 Multi-I/O Controller [9710:9835] (rev 01) (prog-if 02 [16550])
Subsystem: LSI Logic / Symbios Logic 2S (16C550 UART) [1000:0002]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 9000 [size=8]
Region 1: I/O ports at 8800 [size=8]
Region 2: I/O ports at 8400 [size=8]
Region 3: I/O ports at 8000 [size=8]
Region 4: I/O ports at 7800 [size=8]
Region 5: I/O ports at 7400 [size=16]
Kernel driver in use: serial
Kernel modules: parport_serial

01:00.0 VGA compatible controller [0300]: nVidia Corporation NV15 [GeForce2 GTS/Pro] [10de:0150] (rev a3) (prog-if 00 [VGA controller])
Subsystem: Creative Labs Device [1102:1047]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at ee000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at efff0000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel modules: nvidiafb



-- System Information:
Debian Release: 5.0
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)

Kernel: Linux 2.6.26-1-686 (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.26-1-686 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo

Versions of packages linux-image-2.6.26-1-686 recommends:
ii libc6-i686 2.7-18 GNU C Library: Shared libraries [i

Versions of packages linux-image-2.6.26-1-686 suggests:
ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)

-- debconf information:
linux-image-2.6.26-1-686/preinst/abort-overwrite-2.6.26-1-686:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-1-686/postinst/bootloader-error-2.6.26-1-686:
linux-image-2.6.26-1-686/postinst/depmod-error-initrd-2.6.26-1-686: false
linux-image-2.6.26-1-686/prerm/removing-running-kernel-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/old-system-map-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/abort-install-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/lilo-has-ramdisk:
linux-image-2.6.26-1-686/preinst/bootloader-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/prerm/would-invalidate-boot-loader-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/elilo-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/kimage-is-a-directory:
linux-image-2.6.26-1-686/postinst/old-dir-initrd-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/create-kimage-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/lilo-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/old-initrd-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/overwriting-modules-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/depmod-error-2.6.26-1-686: false
linux-image-2.6.26-1-686/postinst/bootloader-test-error-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/failed-to-move-modules-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/initrd-2.6.26-1-686:



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 
Old 03-15-2009, 08:29 AM
Mark de Wever
 
Default Bug#517330: linux-image-2.6.26-1-686: ide-tape hangs for 180s on boot and disables the cdrom

Hi Tzvetan,

> Under 2.6.26 ide-tape hangs during boot at:
> "[ 5.776016] ide-tape: hdd <-> ht0: Seagate STT3401A rev 3"
> After about 180 seconds the boot continues somehow, but as I understand
> it, the cdrom task is still frozen, so the tape and more importantly the
> CDROM are not working.
>
> So, the problem is threefold:
> - long delay on boot
> - tape no longer working
> - cdrom no longer working
>
> The situation is dire since we have this same tape drive on many systems
> and so far I haven't found a way to at least disable it via any
> configuration means. The "hdd=none" boot parameter has no efect.
> Blacklisting ide_tape in modprobe.d also doesn't affect it.

For me blacklisting the ide_tape module works.

I also don't experience the long delay at boot, it did delay before I
blacklisted the ide_tape module.

My cdrom drive also works normally, I didn't test the cdrom without
blacklisting the ide_tape module. My cdrom is a burner so I also
blacklisted ide_cd module, not sure whether that changes the behaviour.

I also posted a bugreport about this issue in the Debian tracker [1].

[1] http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=499752

--
Regards,
Mark de Wever



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 
Old 07-10-2010, 12:45 PM
Moritz Muehlenhoff
 
Default Bug#517330: linux-image-2.6.26-1-686: ide-tape hangs for 180s on boot and disables the cdrom

tags 517330 moreinfo
thanks

On Thu, Feb 26, 2009 at 04:14:09PM -0800, Tzvetan Mikov wrote:
> Package: linux-image-2.6.26-1-686
> Version: 2.6.26-13
> Severity: normal
>
> Upgrade from Etch to Lenny. The computer has an IDE tape attached to
> hdd (slave). The cdrom is at hdc (master). It all worked fine under
> 2.6.18.
>
> Under 2.6.26 ide-tape hangs during boot at:
> "[ 5.776016] ide-tape: hdd <-> ht0: Seagate STT3401A rev 3"
> After about 180 seconds the boot continues somehow, but as I understand
> it, the cdrom task is still frozen, so the tape and more importantly the
> CDROM are not working.
>
> So, the problem is threefold:
> - long delay on boot
> - tape no longer working
> - cdrom no longer working
>
> I found a report on LKML that looks to be describing exactly the same
> problem:
> http://lkml.org/lkml/2008/9/21/148
>
> The situation is dire since we have this same tape drive on many systems
> and so far I haven't found a way to at least disable it via any
> configuration means. The "hdd=none" boot parameter has no efect.
> Blacklisting ide_tape in modprobe.d also doesn't affect it.

Hi,
The next release of Debian (6.0, code name Squeeze) will be based
on 2.6.32. Please test the current 2.6.32 from unstable/testing and tell
us whether the problem persists. If so, we should report it upstream
to the kernel.org developers.

The 2.6.32 kernel is available from packages.debian.org and can
be installed in both Debian stable, testing and unstable
installations.

Thanks,
Moritz



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20100710124536.GA2840@galadriel.inutil.org">http://lists.debian.org/20100710124536.GA2840@galadriel.inutil.org
 
Old 07-10-2010, 03:33 PM
"T.Mikov"
 
Default Bug#517330: linux-image-2.6.26-1-686: ide-tape hangs for 180s on boot and disables the cdrom

> Hi,
> The next release of Debian (6.0, code name Squeeze) will be based
> on 2.6.32. Please test the current 2.6.32 from unstable/testing and tell
> us whether the problem persists. If so, we should report it upstream
> to the kernel.org developers.
>
> The 2.6.32 kernel is available from packages.debian.org and can
> be installed in both Debian stable, testing and unstable
> installations.
>
> Thanks,
> Moritz
>
OK. I will test some time next week and get back to you. The problem has
become less serious in the meantime because hardly anyone uses ide tapes
anymore...

regards,
Tzvetan




--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 4C3892C9.50602@gmgsys.com">http://lists.debian.org/4C3892C9.50602@gmgsys.com
 

Thread Tools




All times are GMT. The time now is 07:12 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org