Linux Archive

Linux Archive (http://www.linux-archive.org/)
-   Debian Kernel (http://www.linux-archive.org/debian-kernel/)
-   -   Bug#441260: linux-image-2.6-k7: skge driver does not support SK-9872 card. (http://www.linux-archive.org/debian-kernel/218517-bug-441260-linux-image-2-6-k7-skge-driver-does-not-support-sk-9872-card.html)

Moritz Muehlenhoff 12-25-2008 09:15 PM

Bug#441260: linux-image-2.6-k7: skge driver does not support SK-9872 card.
 
On Fri, Sep 07, 2007 at 03:32:03PM -0600, David Mitchell wrote:
> Package: linux-image-2.6-k7
> Version: 2.6.18+6etch2
> Severity: important
>
> The skge driver in the 2.6.18-5-k7 kernel does not appear to support
> the SysKonnect SK-9872 GigE adaptor. This card was supported by the
> sk98lin driver, and it my impression from searching on Google that
> this may simply be a matter of the new skge driver not having the
> needed product ID information.
>
> Here is the log entry created
> when the driver loads:
> Sep 6 13:51:28 npad kernel: ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI
> 16 (leve
> l, low) -> IRQ 185
> Sep 6 13:51:28 npad kernel: skge 0000:00:08.0: unsupported phy type 0x0
> Sep 6 13:51:28 npad kernel: ACPI: PCI interrupt for device 0000:00:08.0
> disable
> d
> Sep 6 13:51:28 npad kernel: skge: probe of 0000:00:08.0 failed with
> error -95
>
> And the relevant portion of lspci -vv.
> 00:08.0 Ethernet controller: SysKonnect SK-9872 Gigabit Ethernet Server
> Adapter (SK-NET GE-ZX dual link) (rev 12)
> Subsystem: SysKonnect SK-9843 Gigabit Ethernet Server Adapter
> (SK-NET GE-SX)
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 189 (5750ns min, 7750ns max), Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 10
> Region 0: Memory at f4000000 (32-bit, non-prefetchable)
> [size=16K]
> Region 1: I/O ports at 1000 [size=256]
> [virtual] Expansion ROM at 50000000 [disabled] [size=128K]
> Capabilities: [48] Power Management version 1
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=1 PME-
> Capabilities: [50] Vital Product Data

Does this error still occur with more recent kernel versions?

If you're running Etch, could you try to reproduce this bug
with the 2.6.24 based kernel added in 4.0r4?
http://packages.qa.debian.org/l/linux-2.6.24.html

Cheers,
Moritz



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org


All times are GMT. The time now is 01:05 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.