FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 12-20-2008, 10:39 PM
Moritz Muehlenhoff
 
Default Bug#472462: linux-image-2.6.24-1-amd64: log cluttered with ide failed opcode for dvd drive

On Mon, Mar 24, 2008 at 08:42:06AM -0400, Jerry Quinn wrote:
> Package: linux-image-2.6.24-1-amd64
> Version: 2.6.24-4
> Severity: normal
>
>
> In my log, I'm seeing about 4 of these messages every 2 minutes. It's
> annoying as it clutters the kernel log and prevents seeing other issues that
> might show up:
>
> Mar 24 08:33:26 cerberus kernel: hda: drive not ready for command
> Mar 24 08:33:26 cerberus kernel: hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
> Mar 24 08:33:26 cerberus kernel: ide: failed opcode was: unknown
> Mar 24 08:33:26 cerberus kernel: hda: drive not ready for command
>
> On my machine, hda is the dvd drive. This is the only ide device attached.
> The hard drives are sata and numbered sda and sdb.
>
> This is the ide section from dmesg:
>
> JMB: IDE controller (0x197b:0x2368 rev 0x00) at PCI slot 0000:02:00.0
> ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
> JMB: 100% native mode on irq 16
> ide0: BM-DMA at 0xc400-0xc407, BIOS settings: hdaMA, hdbio
> ide1: BM-DMA at 0xc408-0xc40f, BIOS settings: hdcio, hddio
> Probing IDE interface ide0...
> sdb5 >
> sd 1:0:0:0: [sdb] Attached SCSI disk
> firewire_core: created new fw device fw0 (0 config rom retries, S400)
> hda: LITE-ON DVDRW LH-20A1H, ATAPI CD/DVD-ROM drive
> hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
> hda: UDMA/66 mode selected
> ide0 at 0xc000-0xc007,0xc102 on irq 16
> Probing IDE interface ide1...
> hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
> Uniform CD-ROM driver Revision: 3.20

Does this error still occur with more recent kernel versions?

Cheers,
Moritz



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 
Old 02-01-2009, 09:39 PM
"Richard Guo"
 
Default Bug#472462: linux-image-2.6.24-1-amd64: log cluttered with ide failed opcode for dvd drive

Yes, I can confirm that this bug still exist on lenny. This is using the
latest 2.6.26-1-amd64 kernel. I am attaching the relevant information.


For me, the bug manifests itself when playing an audio cd. There is a
constant buzzing noise and dmesg shows:


[ 9227.846775] hdb: status error: status=0x58 { DriveReady SeekComplete
DataRequest }

[ 9227.846784] ide: failed opcode was: unknown
[ 9227.846790] hdb: drive not ready for command
[ 9227.847331] hdb: status error: status=0x58 { DriveReady SeekComplete
DataRequest }

[ 9227.847338] ide: failed opcode was: unknown
[ 9227.847342] hdb: drive not ready for command
[ 9227.847351] hdb: status error: status=0x58 { DriveReady SeekComplete
DataRequest }

[ 9227.847351] ide: failed opcode was: unknown
[ 9227.847351] hdb: drive not ready for command
[ 9227.847351] hdb: status error: status=0x58 { DriveReady SeekComplete
DataRequest }

[ 9227.847351] ide: failed opcode was: unknown
[ 9227.847351] hdb: drive not ready for command
[ 9227.847351] hdb: status error: status=0x58 { DriveReady SeekComplete
DataRequest }

[ 9227.847351] ide: failed opcode was: unknown
[ 9227.847351] hdb: drive not ready for command


lsmod shows:

Module Size Used by
aes_x86_64 12416 0
aes_generic 32552 1 aes_x86_64
rt2500pci 23168 0
fglrx 2222296 27
ipv6 288328 18
ppdev 11656 0
lp 14724 0
vmnet 43332 13
parport_pc 31016 0
parport 41776 3 ppdev,lp,parport_pc
vmblock 18128 3
vmci 52904 0
vmmon 72144 0
acpi_cpufreq 11792 1
cpufreq_stats 9120 0
cpufreq_ondemand 11792 1
cpufreq_conservative 11784 0
cpufreq_powersave 6400 0
freq_table 9344 3 acpi_cpufreq,cpufreq_stats,cpufreq_ondemand
cpufreq_userspace 8452 0
fuse 53184 1
loop 19468 0
arc4 6272 2
ecb 7296 2
crypto_blkcipher 21636 1 ecb
rt61pci 27136 0
crc_itu_t 6528 1 rt61pci
rt2x00pci 13056 2 rt2500pci,rt61pci
rt2x00lib 30080 3 rt2500pci,rt61pci,rt2x00pci
firmware_class 12544 1 rt2x00lib
rfkill 11168 2 rt2x00lib
led_class 8968 1 rt2x00lib
input_polldev 8720 1 rt2x00lib
mac80211 162864 2 rt2x00pci,rt2x00lib
cfg80211 30224 2 rt2x00lib,mac80211
psmouse 42268 0
pcspkr 7040 0
serio_raw 9860 0
snd_hda_intel 434904 5
eeprom_93cx6 6784 2 rt2500pci,rt61pci
snd_pcm_oss 41760 0
snd_mixer_oss 18816 1 snd_pcm_oss
snd_pcm 81672 3 snd_hda_intel,snd_pcm_oss
i2c_i801 13596 0
snd_seq_dummy 7428 0
snd_seq_oss 33152 0
i2c_core 27936 1 i2c_i801
iTCO_wdt 15696 0
snd_seq_midi 11072 0
snd_rawmidi 26784 1 snd_seq_midi
snd_seq_midi_event 11904 2 snd_seq_oss,snd_seq_midi
snd_seq 54304 6
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_mid i_event

snd_timer 25744 3 snd_pcm,snd_seq
snd_seq_device 11668 5
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi ,snd_seq
snd 63688 17
snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,sn d_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_de vice

soundcore 12064 1 snd
snd_page_alloc 13072 2 snd_hda_intel,snd_pcm
button 11680 0
intel_agp 31728 0
evdev 14208 3
ext3 125072 1
jbd 51240 1 ext3
mbcache 12804 1 ext3
raid1 24192 2
md_mod 80164 3 raid1
sd_mod 29376 6
ide_cd_mod 36360 0
cdrom 37928 1 ide_cd_mod
ata_generic 10116 0
usbhid 45792 0
hid 41792 1 usbhid
ff_memless 9224 1 usbhid
ide_pci_generic 9220 0 [permanent]
ahci 33036 4
r8169 31492 0
libata 165472 2 ata_generic,ahci
scsi_mod 160760 2 sd_mod,libata
dock 14112 1 libata
jmicron 6912 0 [permanent]
ide_core 128284 3 ide_cd_mod,ide_pci_generic,jmicron
ehci_hcd 36108 0
uhci_hcd 25760 0
thermal 22688 0
processor 42304 2 acpi_cpufreq,thermal
fan 9352 0
thermal_sys 17728 3 thermal,processor,fan

I believe the guilty party is the module jmicron, as evidenced by the post
at http://bbs.archlinux.org/viewtopic.php?pid=274632

Are there plans to use the module pata_jmicron instead?



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 

Thread Tools




All times are GMT. The time now is 04:48 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org