FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 12-11-2008, 05:35 AM
Fredrik Tolf
 
Default Bug#494444: linux-image-2.6.26-1-686: Another confirmation

Package: linux-image-2.6.26-1-686
Version: 2.6.26-11
Followup-For: Bug #494444

I'd just like to file a "me too" on this bug. I can confirm that
kacpid and kacpi_notify take ~90% of my CPU time together after I've
had the laptop suspended to RAM, and also that, when I try to suspend
to RAM again after that, it will not wake up again. It worked when I
was running 2.6.24 (and I only recently upgrade, because previous
2.6.26 kernels had another, unrelated bug).

My computer is a Dell Latitude D610. Dmidecode reports the BIOS
version as A02.

Unfortunately, I have no constructive information to add at this
time. I'll try to find something out.

-- Package-specific info:
** Version:
Linux version 2.6.26-1-686 (Debian 2.6.26-11) (waldi@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Wed Nov 26 19:14:11 UTC 2008

** Command line:
root=/dev/sda6 ro

** Not tainted

** Kernel log:
[28249.056071] PM: Writing back config space on device 0000:00:1d.1 at offset f (was 200, writing 20a)
[28249.056071] PM: Writing back config space on device 0000:00:1d.1 at offset 8 (was 1, writing bf61)
[28249.056071] usb usb2: root hub lost power or was reset
[28249.056071] uhci_hcd 0000:00:1d.2: enabling device (0000 -> 0001)
[28249.056071] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[28249.056071] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[28249.056071] PM: Writing back config space on device 0000:00:1d.2 at offset f (was 300, writing 309)
[28249.056071] PM: Writing back config space on device 0000:00:1d.2 at offset 8 (was 1, writing bf41)
[28249.056071] usb usb3: root hub lost power or was reset
[28249.056071] uhci_hcd 0000:00:1d.3: enabling device (0000 -> 0001)
[28249.056071] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19
[28249.056071] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[28249.056071] PM: Writing back config space on device 0000:00:1d.3 at offset f (was 400, writing 405)
[28249.056071] PM: Writing back config space on device 0000:00:1d.3 at offset 8 (was 1, writing bf21)
[28249.056071] usb usb4: root hub lost power or was reset
[28249.069391] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 16
[28249.069417] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[28249.069534] usb usb5: root hub lost power or was reset
[28249.076160] ehci_hcd 0000:00:1d.7: debug port 1
[28249.076160] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[28249.076160] PM: Writing back config space on device 0000:00:1e.0 at offset 9 (was 10001, writing 1fff1)
[28249.076160] PM: Writing back config space on device 0000:00:1e.0 at offset 8 (was 0, writing dfb0dfb0)
[28249.076160] PM: Writing back config space on device 0000:00:1e.0 at offset 7 (was 2280e0f0, writing 22802020)
[28249.076160] PM: Writing back config space on device 0000:00:1e.0 at offset 6 (was 20030300, writing 20070300)
[28249.076160] PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100005, writing 100107)
[28249.076160] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[28249.076160] PM: Writing back config space on device 0000:00:1e.2 at offset f (was 100, writing 10b)
[28249.076160] PM: Writing back config space on device 0000:00:1e.2 at offset 7 (was 0, writing dffffd00)
[28249.076160] PM: Writing back config space on device 0000:00:1e.2 at offset 6 (was 0, writing dffffe00)
[28249.076160] PM: Writing back config space on device 0000:00:1e.2 at offset 5 (was 1, writing ec41)
[28249.076160] PM: Writing back config space on device 0000:00:1e.2 at offset 4 (was 1, writing ed01)
[28249.076160] PM: Writing back config space on device 0000:00:1e.2 at offset 1 (was 2900000, writing 2900003)
[28249.076160] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 16 (level, low) -> IRQ 16
[28249.076160] PCI: Setting latency timer of device 0000:00:1e.2 to 64
[28250.170128] PM: Writing back config space on device 0000:00:1e.3 at offset f (was 200, writing 20a)
[28250.170184] PM: Writing back config space on device 0000:00:1e.3 at offset 5 (was 1, writing ec81)
[28250.170205] PM: Writing back config space on device 0000:00:1e.3 at offset 4 (was 1, writing ee01)
[28250.170234] PM: Writing back config space on device 0000:00:1e.3 at offset 1 (was 2900000, writing 2900001)
[28250.170287] ACPI: PCI Interrupt 0000:00:1e.3[b] -> GSI 17 (level, low) -> IRQ 17
[28250.170315] PCI: Setting latency timer of device 0000:00:1e.3 to 64
[28251.176343] PM: Writing back config space on device 0000:00:1f.0 at offset 1 (was 2000007, writing 2000107)
[28251.189495] PM: Writing back config space on device 0000:00:1f.2 at offset f (was 200, writing 20a)
[28251.189536] PM: Writing back config space on device 0000:00:1f.2 at offset 9 (was d0000, writing 0)
[28251.189618] ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 17 (level, low) -> IRQ 17
[28251.189642] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[28251.189698] PM: Writing back config space on device 0000:00:1f.3 at offset f (was 200, writing 20a)
[28251.189780] PM: Writing back config space on device 0000:00:1f.3 at offset 1 (was 2800001, writing 2800101)
[28251.189834] PM: Writing back config space on device 0000:01:00.0 at offset f (was 1ff, writing 10b)
[28251.189871] PM: Writing back config space on device 0000:01:00.0 at offset 6 (was 0, writing dfdf0000)
[28251.189890] PM: Writing back config space on device 0000:01:00.0 at offset 5 (was 1, writing de01)
[28251.189909] PM: Writing back config space on device 0000:01:00.0 at offset 4 (was 8, writing d0000008)
[28251.189928] PM: Writing back config space on device 0000:01:00.0 at offset 3 (was 0, writing 10)
[28251.189949] PM: Writing back config space on device 0000:01:00.0 at offset 1 (was 100000, writing 100007)
[28251.190010] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[28251.190030] PCI: Setting latency timer of device 0000:01:00.0 to 64
[28251.190120] PM: Writing back config space on device 0000:02:00.0 at offset f (was 1df, writing 10b)
[28251.190189] PM: Writing back config space on device 0000:02:00.0 at offset 5 (was beff50ff, writing 0)
[28251.190215] PM: Writing back config space on device 0000:02:00.0 at offset 4 (was 8aff0004, writing dfcf0004)
[28251.190239] PM: Writing back config space on device 0000:02:00.0 at offset 3 (was 0, writing 10)
[28251.190268] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 100000, writing 100106)
[28251.190385] PM: Writing back config space on device 0000:03:01.0 at offset f (was 7c001ff, writing 5c001ff)
[28251.190409] PM: Writing back config space on device 0000:03:01.0 at offset e (was 0, writing 24fc)
[28251.190432] PM: Writing back config space on device 0000:03:01.0 at offset d (was 0, writing 2400)
[28251.190454] PM: Writing back config space on device 0000:03:01.0 at offset c (was 0, writing 20fc)
[28251.190476] PM: Writing back config space on device 0000:03:01.0 at offset b (was 0, writing 2000)
[28251.190499] PM: Writing back config space on device 0000:03:01.0 at offset a (was 0, writing 33fff000)
[28251.190523] PM: Writing back config space on device 0000:03:01.0 at offset 9 (was 0, writing 30000000)
[28251.190546] PM: Writing back config space on device 0000:03:01.0 at offset 8 (was 0, writing 343ff000)
[28251.190569] PM: Writing back config space on device 0000:03:01.0 at offset 7 (was 0, writing 34000000)
[28251.190593] PM: Writing back config space on device 0000:03:01.0 at offset 6 (was 20000000, writing b0070403)
[28251.190621] PM: Writing back config space on device 0000:03:01.0 at offset 4 (was 0, writing dfb00000)
[28251.190645] PM: Writing back config space on device 0000:03:01.0 at offset 3 (was 820000, writing 82a808)
[28251.328950] PM: Writing back config space on device 0000:03:01.5 at offset f (was 1ff, writing 105)
[28251.329015] PM: Writing back config space on device 0000:03:01.5 at offset 5 (was 0, writing dfbfe000)
[28251.329039] PM: Writing back config space on device 0000:03:01.5 at offset 4 (was 0, writing dfbfd000)
[28251.329072] PM: Writing back config space on device 0000:03:01.5 at offset 1 (was 2100000, writing 2100102)
[28251.329113] wlan0: Coming out of suspend...
[28251.352258] ipw2200 0000:03:03.0: enabling device (0000 -> 0002)
[28251.352279] ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 17 (level, low) -> IRQ 17
[28251.352320] PM: Writing back config space on device 0000:03:03.0 at offset f (was 18030100, writing 1803010a)
[28251.352387] PM: Writing back config space on device 0000:03:03.0 at offset 4 (was 0, writing dfbff000)
[28251.352411] PM: Writing back config space on device 0000:03:03.0 at offset 3 (was 0, writing 4010)
[28251.352439] PM: Writing back config space on device 0000:03:03.0 at offset 1 (was 2900002, writing 2900116)
[28251.380007] serial 00:0b: activated
[28251.424048] parport_pc 00:0c: activated
[28251.579265] ata1.00: configured for UDMA/100
[28251.579464] sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB)
[28251.579553] sd 0:0:0:0: [sda] Write Protect is off
[28251.579566] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[28251.579715] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[28253.439033] sd 0:0:0:0: [sda] Starting disk
[28253.468643] Restarting tasks ... <6>usb 2-1: USB disconnect, address 3
[28254.352006] done.
[28254.777744] usb 2-1: new full speed USB device using uhci_hcd and address 4
[28254.974406] usb 2-1: configuration #1 chosen from 1 choice
[28254.980414] usb 2-1: New USB device found, idVendor=413c, idProduct=8103
[28254.980414] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[28257.752273] [drm] Loading R300 Microcode
[28257.752273] [drm] Num pipes: 1
[28325.257085] wlan0: no IPv6 routers present

** Loaded modules:
Module Size Used by
radeon 118688 2
drm 65256 3 radeon
binfmt_misc 7528 1
rfcomm 28272 1
l2cap 17248 3 rfcomm
ppdev 6468 0
lp 8164 0
autofs4 16420 1
michael_mic 2304 0
arc4 1824 0
ecb 2624 0
crypto_blkcipher 15236 1 ecb
ieee80211_crypt_tkip 8064 0
cpufreq_ondemand 6476 1
cpufreq_userspace 3172 0
cpufreq_conservative 5960 0
cpufreq_stats 3776 0
cpufreq_powersave 1856 0
ipv6 235300 22
nfsd 186672 4
exportfs 3904 1 nfsd
nfs 213896 0
lockd 54248 2 nfsd,nfs
nfs_acl 2912 2 nfsd,nfs
dm_snapshot 14340 0
dm_mirror 15104 0
dm_log 8452 1 dm_mirror
dm_mod 46184 3 dm_snapshot,dm_mirror,dm_log
snd_pcm_oss 32800 0
snd_mixer_oss 12320 1 snd_pcm_oss
acpi_cpufreq 6796 0
freq_table 4224 3 cpufreq_ondemand,cpufreq_stats,acpi_cpufreq
rpcsec_gss_krb5 6384 0
auth_rpcgss 33952 2 nfsd,rpcsec_gss_krb5
sunrpc 162144 10 nfsd,nfs,lockd,nfs_acl,rpcsec_gss_krb5,auth_rpcgss
loop 12748 0
joydev 8480 0
pcmcia 29548 0
ipw2200 123560 0
parport_pc 22500 1
parport 30988 3 ppdev,lp,parport_pc
ieee80211 27048 1 ipw2200
ieee80211_crypt 5124 2 ieee80211_crypt_tkip,ieee80211
psmouse 32336 0
snd_intel8x0 26268 0
i2c_i801 7920 0
firmware_class 6816 2 pcmcia,ipw2200
pcspkr 2432 0
yenta_socket 20620 1
rsrc_nonstatic 9504 1 yenta_socket
pcmcia_core 31892 3 pcmcia,yenta_socket,rsrc_nonstatic
snd_intel8x0m 12492 0
serio_raw 4740 0
i2c_core 19828 1 i2c_i801
rng_core 3940 0
snd_ac97_codec 88484 2 snd_intel8x0,snd_intel8x0m
snd_seq 41456 0
snd_seq_device 6380 1 snd_seq
iTCO_wdt 9508 0
ac97_bus 1728 1 snd_ac97_codec
snd_pcm 62596 4 snd_pcm_oss,snd_intel8x0,snd_intel8x0m,snd_ac97_co dec
snd_timer 17800 2 snd_seq,snd_pcm
snd 45604 9 snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_intel8x 0m,snd_ac97_codec,snd_seq,snd_seq_device,snd_pcm,s nd_timer
soundcore 6368 1 snd
snd_page_alloc 7816 3 snd_intel8x0,snd_intel8x0m,snd_pcm
hci_usb 12252 0
bluetooth 44900 3 rfcomm,l2cap,hci_usb
video 16432 0
output 2912 1 video
battery 10180 0
button 6096 0
ac 4196 0
intel_agp 22332 0
agpgart 28776 2 drm,intel_agp
evdev 8000 9
dcdbas 6272 0
ext3 105512 2
jbd 39444 1 ext3
mbcache 7108 1 ext3
sd_mod 22200 4
ata_piix 14180 3
ahci 23176 0
ata_generic 4676 0
libata 140384 3 ata_piix,ahci,ata_generic
scsi_mod 129356 2 sd_mod,libata
ide_pci_generic 3908 0 [permanent]
ide_core 96168 1 ide_pci_generic
ehci_hcd 28428 0
uhci_hcd 18672 0
usbcore 118160 4 hci_usb,ehci_hcd,uhci_hcd
tg3 84708 0
dock 8304 1 libata
thermal 15228 0
processor 32576 3 acpi_cpufreq,thermal
fan 4164 0
thermal_sys 10856 4 video,thermal,processor,fan

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller [8086:2590] (rev 03)
Subsystem: Dell Dell Latidude C610 [1028:0182]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: intel-agp

00:01.0 PCI bridge [0604]: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port [8086:2591] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: dfd00000-dfefffff
Prefetchable memory behind bridge: d0000000-d7ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: dfc00000-dfcfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0182]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at bf80 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0182]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at bf60 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0182]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at bf40 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1d.3 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 [8086:265b] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0182]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 4: I/O ports at bf20 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 03) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:0182]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at ffa80800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev d3) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=07, sec-latency=32
I/O behind bridge: 00002000-00002fff
Memory behind bridge: dfb00000-dfbfffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>

00:1e.2 Multimedia audio controller [0401]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller [8086:266e] (rev 03)
Subsystem: Dell Latitude D610 Laptop [1028:0182]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at ed00 [size=256]
Region 1: I/O ports at ec40 [size=64]
Region 2: Memory at dffffe00 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at dffffd00 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: Intel ICH
Kernel modules: snd-intel8x0

00:1e.3 Modem [0703]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller [8086:266d] (rev 03) (prog-if 00 [Generic])
Subsystem: Conexant Device [14f1:5423]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at ee00 [size=256]
Region 1: I/O ports at ec80 [size=128]
Capabilities: <access denied>
Kernel driver in use: Intel ICH Modem
Kernel modules: snd-intel8x0m

00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge [8086:2641] (rev 03)
Subsystem: Dell Device [1028:0182]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel modules: intel-rng, iTCO_wdt

00:1f.2 IDE interface [0101]: Intel Corporation 82801FBM (ICH6M) SATA Controller [8086:2653] (rev 03) (prog-if 80 [Master])
Subsystem: Dell Device [1028:0182]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at bfa0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ahci, ata_piix

00:1f.3 SMBus [0c05]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller [8086:266a] (rev 03)
Subsystem: Dell Device [1028:0182]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 10c0 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801

01:00.0 VGA compatible controller [0300]: ATI Technologies Inc M22 [Mobility Radeon X300] [1002:5460] (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:2006]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at de00 [size=256]
Region 2: Memory at dfdf0000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at dfd00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel modules: radeonfb

02:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express [14e4:1677] (rev 01)
Subsystem: Dell Latitude D610 [1028:0182]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at dfcf0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: tg3
Kernel modules: tg3

03:01.0 CardBus bridge [0607]: Texas Instruments PCI6515 Cardbus Controller [104c:8036]
Subsystem: Dell Device [1028:0182]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at dfb00000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=03, secondary=04, subordinate=07, sec-latency=176
Memory window 0: 34000000-343ff000 (prefetchable)
Memory window 1: 30000000-33fff000
I/O window 0: 00002000-000020ff
I/O window 1: 00002400-000024ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket

03:01.5 Communication controller [0780]: Texas Instruments PCI6515 SmartCard Controller [104c:8038]
Subsystem: Dell Device [1028:0182]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 5
Region 0: Memory at dfbfd000 (32-bit, non-prefetchable) [size=4K]
Region 1: Memory at dfbfe000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>

03:03.0 Network controller [0280]: Intel Corporation PRO/Wireless 2915ABG [Calexico2] Network Connection [8086:4223] (rev 05)
Subsystem: Intel Corporation Device [8086:1021]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (750ns min, 6000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at dfbff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ipw2200
Kernel modules: ipw2200



-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing'), (400, 'unstable')
Architecture: i386 (i686)

Kernel: Linux 2.6.26-1-686 (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.26-1-686 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92j tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo

Versions of packages linux-image-2.6.26-1-686 recommends:
ii libc6-i686 2.7-16 GNU C Library: Shared libraries [i

Versions of packages linux-image-2.6.26-1-686 suggests:
ii grub 0.97-47 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)

-- debconf information:
linux-image-2.6.26-1-686/preinst/abort-overwrite-2.6.26-1-686:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-1-686/postinst/bootloader-error-2.6.26-1-686:
linux-image-2.6.26-1-686/postinst/depmod-error-initrd-2.6.26-1-686: false
linux-image-2.6.26-1-686/prerm/removing-running-kernel-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/old-system-map-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/abort-install-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/lilo-has-ramdisk:
linux-image-2.6.26-1-686/preinst/bootloader-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/prerm/would-invalidate-boot-loader-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/elilo-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/kimage-is-a-directory:
linux-image-2.6.26-1-686/postinst/old-dir-initrd-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/create-kimage-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/lilo-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/old-initrd-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/overwriting-modules-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/depmod-error-2.6.26-1-686: false
linux-image-2.6.26-1-686/postinst/bootloader-test-error-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/failed-to-move-modules-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/initrd-2.6.26-1-686:



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 

Thread Tools




All times are GMT. The time now is 10:11 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org