FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 11-29-2008, 03:12 AM
Tim Connors
 
Default Bug#507224: linux-image-2.6.26-1-amd64: oops in autofs4

Package: linux-image-2.6.26-1-amd64
Version: 2.6.26-10
Severity: normal

I got an oops when autofs4 tried to mount a directory that it had
mounted successfully many times previously. It may be the same race
condition reported here: http://lkml.org/lkml/2008/6/3/76 , although
at least one of those patches presumably made it into this debian
kernel.

My syslog log is here:

PGD 6577c067 PUD b9ca0067 PMD 0
CPU 0
Modules linked in: mos7720 usbserial nfs lockd nfs_acl sunrpc nvidia(P) ppdev lp autofs4 video output ac battery acpi_cpufreq cpufreq_userspace cpufreq_powersave cpufreq_ondemand cpufreq_stats freq_table cpufreq_conservative ipv6 fuse loop parport_pc parport serio_raw psmouse snd_intel8x0 i2c_i801 i2c_core pcspkr snd_ac97_codec ac97_bus snd_pcm snd_seq snd_timer snd_seq_device snd iTCO_wdt button soundcore snd_page_alloc rng_core dcdbas evdev ext3 jbd mbcache dm_mirror dm_log dm_snapshot dm_mod sd_mod ide_cd_mod cdrom usbhid hid ff_memless ata_generic ata_piix libata scsi_mod dock piix floppy ide_pci_generic ide_core ehci_hcd uhci_hcd tg3 thermal processor fan thermal_sys
Pid: 28263, comm: mount.nfs Tainted: P 2.6.26-1-amd64 #1
RIP: 0010:[<ffffffff802af516>] [<ffffffff802af516>] graft_tree+0x2e/0xf8
RSP: 0018:ffff81001c38be08 EFLAGS: 00010246
RAX: ffff8100733732f0 RBX: ffff81001c38be68 RCX: 0000000000000000
RDX: ffff8100bf63c380 RSI: ffff81001c38be68 RDI: ffff810021ce7980
RBP: 00000000ffffffec R08: 0000000000000292 R09: ffff8100af37e3a8
R10: 0000000083712fac R11: 0000000000000000 R12: ffff810021ce7980
R13: 0000000000000000 R14: 0000000000000003 R15: ffff8100bc316000
FS: 00007f697b6fd6e0(0000) GS:ffffffff8053b000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00000000000000b2 CR3: 0000000022fba000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process mount.nfs (pid: 28263, threadinfo ffff81001c38a000, task ffff8100253054b0)
Stack: ffff810021ce7980 ffff81001c38be68 0000000000000000 ffffffff802af7de
0000000000000000 0000000000000003 0000000000000006 0000000000000000
ffff81001c38be68 ffffffff802b16ec ffff81008cfe2000 ffff810004e46000
Call Trace:
[<ffffffff802af7de>] ? do_add_mount+0xa6/0x124
[<ffffffff802b16ec>] ? do_mount+0x1bd/0x1e7
[<ffffffff802af12f>] ? copy_mount_options+0xc9/0x126
[<ffffffff802b17a0>] ? sys_mount+0x8a/0xce
[<ffffffff8020be9a>] ? system_call_after_swapgs+0x8a/0x8f


RSP <ffff81001c38be08>
---[ end trace e510ca244b9cab4c ]---



-- Package-specific info:
** Version:
Linux version 2.6.26-1-amd64 (Debian 2.6.26-10) (waldi@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Sat Nov 8 18:25:23 UTC 2008

** Command line:
BOOT_IMAGE=/vmlinuz-2.6.26-1-amd64 root=/dev/mapper/debian-root ro quiet

** Tainted: P (1)

** Kernel log:
[ 7.061142] sd 0:0:0:0: [sda] 312500000 512-byte hardware sectors (160000 MB)
[ 7.061142] sd 0:0:0:0: [sda] Write Protect is off
[ 7.061142] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 7.061142] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.061142] sda: sda1 sda2 sda3 sda4 < sda5 >
[ 7.100758] sd 0:0:0:0: [sda] Attached SCSI disk
[ 7.870621] hiddev96hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS CS 500 FW:808.q8.I USB FW:q8] on usb-0000:00:1d.2-2
[ 7.870621] usbcore: registered new interface driver usbhid
[ 7.870621] usbhid: v2.6:USB HID core driver
[ 8.006623] device-mapper: uevent: version 1.0.3
[ 8.006623] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
[ 8.122619] PM: Starting manual resume from disk
[ 8.224390] kjournald starting. Commit interval 5 seconds
[ 8.224390] EXT3-fs: dm-0: orphan cleanup on readonly fs
[ 8.224969] ext3_orphan_cleanup: deleting unreferenced inode 316071
[ 8.236969] ext3_orphan_cleanup: deleting unreferenced inode 98790
[ 8.236969] ext3_orphan_cleanup: deleting unreferenced inode 73558
[ 8.236969] ext3_orphan_cleanup: deleting unreferenced inode 69412
[ 8.313632] ext3_orphan_cleanup: deleting unreferenced inode 68226
[ 8.328969] ext3_orphan_cleanup: deleting unreferenced inode 737333
[ 8.328969] ext3_orphan_cleanup: deleting unreferenced inode 737296
[ 8.328969] ext3_orphan_cleanup: deleting unreferenced inode 65567
[ 8.328969] ext3_orphan_cleanup: deleting unreferenced inode 69323
[ 8.349171] ext3_orphan_cleanup: deleting unreferenced inode 69265
[ 8.364240] ext3_orphan_cleanup: deleting unreferenced inode 738569
[ 8.364240] ext3_orphan_cleanup: deleting unreferenced inode 738567
[ 8.364240] ext3_orphan_cleanup: deleting unreferenced inode 738566
[ 8.364240] ext3_orphan_cleanup: deleting unreferenced inode 738564
[ 8.364240] ext3_orphan_cleanup: deleting unreferenced inode 738563
[ 8.364240] ext3_orphan_cleanup: deleting unreferenced inode 738562
[ 8.364241] ext3_orphan_cleanup: deleting unreferenced inode 738561
[ 8.364241] ext3_orphan_cleanup: deleting unreferenced inode 738560
[ 8.364241] ext3_orphan_cleanup: deleting unreferenced inode 738559
[ 8.364241] ext3_orphan_cleanup: deleting unreferenced inode 738557
[ 8.364241] ext3_orphan_cleanup: deleting unreferenced inode 738555
[ 8.364241] ext3_orphan_cleanup: deleting unreferenced inode 738553
[ 8.364241] ext3_orphan_cleanup: deleting unreferenced inode 738550
[ 8.364241] ext3_orphan_cleanup: deleting unreferenced inode 738549
[ 8.441166] ext3_orphan_cleanup: deleting unreferenced inode 77160
[ 8.441166] ext3_orphan_cleanup: deleting unreferenced inode 67627
[ 8.441166] ext3_orphan_cleanup: deleting unreferenced inode 67626
[ 8.441166] ext3_orphan_cleanup: deleting unreferenced inode 65652
[ 8.441166] ext3_orphan_cleanup: deleting unreferenced inode 99010
[ 8.441166] ext3_orphan_cleanup: deleting unreferenced inode 98998
[ 8.441166] ext3_orphan_cleanup: deleting unreferenced inode 65650
[ 8.441166] EXT3-fs: dm-0: 31 orphan inodes deleted
[ 8.441166] EXT3-fs: recovery complete.
[ 8.490303] EXT3-fs: mounted filesystem with writeback data mode.
[ 10.447389] udevd version 125 started
[ 11.256756] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 11.501770] intel_rng: Firmware space is locked read-only. If you can't or
[ 11.501775] intel_rng: don't want to disable this in firmware setup, and if
[ 11.501777] intel_rng: you are certain that your system has a functional
[ 11.501780] intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 11.586225] input: Power Button (FF) as /class/input/input3
[ 11.614404] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 11.614404] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
[ 11.614404] iTCO_wdt: No card detected
[ 11.650967] ACPI: Power Button (FF) [PWRF]
[ 11.651072] input: Power Button (CM) as /class/input/input4
[ 11.682788] ACPI: Power Button (CM) [VBTN]
[ 12.134728] input: PC Speaker as /class/input/input5
[ 12.235751] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 23 (level, low) -> IRQ 23
[ 12.235751] PCI: Setting latency timer of device 0000:00:1e.2 to 64
[ 12.440997] pnp: the driver 'parport_pc' has been registered
[ 12.441026] parport_pc 00:07: reported by Plug and Play ACPI
[ 12.441087] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 12.537467] parport_pc 00:07: driver attached
[ 12.660493] intel8x0_measure_ac97_clock: measured 55053 usecs
[ 12.660499] intel8x0: clocking to 48000
[ 12.662499] ACPI: PCI Interrupt 0000:00:1f.3[b] -> GSI 17 (level, low) -> IRQ 17
[ 15.010333] EXT3 FS on dm-0, internal journal
[ 15.672244] loop: module loaded
[ 16.650018] fuse init (API version 7.9)
[ 16.772607] kjournald starting. Commit interval 5 seconds
[ 16.772607] EXT3 FS on sda3, internal journal
[ 16.772607] EXT3-fs: mounted filesystem with ordered data mode.
[ 16.776114] kjournald starting. Commit interval 5 seconds
[ 16.791205] EXT3 FS on dm-1, internal journal
[ 16.791211] EXT3-fs: mounted filesystem with ordered data mode.
[ 16.916386] Adding 2031608k swap on /dev/mapper/VolGroup00-LogVol01. Priority:-1 extents:1 across:2031608k
[ 17.903732] NET: Registered protocol family 10
[ 17.904226] lo: Disabled Privacy Extensions
[ 17.905012] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.349994] tg3: eth0: Link is up at 1000 Mbps, full duplex.
[ 20.349994] tg3: eth0: Flow control is on for TX and on for RX.
[ 20.349994] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 27.948618] lp0: using parport0 (interrupt-driven).
[ 27.972618] ppdev: user-space parallel port driver
[ 30.583356] eth0: no IPv6 routers present
[ 32.476137] warning: `ntpd' uses 32-bit capabilities (legacy support in use)
[ 37.604583] nvidia: module license 'NVIDIA' taints kernel.
[ 37.861904] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 37.861904] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 37.861904] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 173.14.09 Wed Jun 4 23:40:50 PDT 2008
[ 45.168739] NVRM: os_map_kernel_space: can't map 0xf0100000, invalid context!
[ 58.903771] RPC: Registered udp transport module.
[ 58.903771] RPC: Registered tcp transport module.
[ 83.523516] wmrack[5047]: segfault at 3c ip 404ed9 sp 7fffc5007cd0 error 4 in wmrack[400000+e000]
[ 88.814623] wmrack[5382]: segfault at 3c ip 404ed9 sp 7fffb00857d0 error 4 in wmrack[400000+e000]

** Loaded modules:
Module Size Used by
nfs 251696 8
lockd 68560 1 nfs
nfs_acl 7552 1 nfs
sunrpc 197480 29 nfs,lockd,nfs_acl
nvidia 8105072 24
ppdev 11656 0
lp 14724 0
autofs4 24200 1
acpi_cpufreq 11792 0
cpufreq_userspace 8452 0
cpufreq_powersave 6400 0
cpufreq_ondemand 11792 0
cpufreq_stats 9120 0
freq_table 9344 3 acpi_cpufreq,cpufreq_ondemand,cpufreq_stats
cpufreq_conservative 11784 0
ipv6 288328 36
fuse 53184 1
loop 19468 0
parport_pc 31016 1
parport 41776 3 ppdev,lp,parport_pc
i2c_i801 13596 0
i2c_core 27936 2 nvidia,i2c_i801
psmouse 42268 0
serio_raw 9860 0
snd_intel8x0 36008 0
pcspkr 7040 0
snd_ac97_codec 115416 1 snd_intel8x0
ac97_bus 6272 1 snd_ac97_codec
snd_pcm 81672 2 snd_intel8x0,snd_ac97_codec
snd_seq 54304 0
snd_timer 25744 2 snd_pcm,snd_seq
snd_seq_device 11668 1 snd_seq
iTCO_wdt 15696 0
button 11680 0
snd 63688 6 snd_intel8x0,snd_ac97_codec,snd_pcm,snd_seq,snd_ti mer,snd_seq_device
rng_core 8968 0
soundcore 12064 1 snd
snd_page_alloc 13072 2 snd_intel8x0,snd_pcm
dcdbas 11952 0
evdev 14208 0
ext3 124944 3
jbd 51240 1 ext3
mbcache 12804 1 ext3
dm_mirror 20608 0
dm_log 13956 1 dm_mirror
dm_snapshot 19400 0
dm_mod 58864 10 dm_mirror,dm_log,dm_snapshot
sd_mod 29376 4
usbhid 45792 0
hid 41792 1 usbhid
ff_memless 9224 1 usbhid
ide_cd_mod 36360 0
cdrom 37928 1 ide_cd_mod
ata_piix 22660 3
piix 12424 0 [permanent]
ide_pci_generic 9220 0 [permanent]
ide_core 128284 3 ide_cd_mod,piix,ide_pci_generic
floppy 61672 0
ata_generic 10116 0
libata 165472 2 ata_piix,ata_generic
scsi_mod 160760 2 sd_mod,libata
dock 14112 1 libata
ehci_hcd 36108 0
tg3 97156 0
uhci_hcd 25760 0
thermal 22688 0
processor 42304 2 acpi_cpufreq,thermal
fan 9352 0
thermal_sys 17728 3 thermal,processor,fan

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub [8086:2770] (rev 02)
Subsystem: Dell OptiPlex GX620 [1028:01ad]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: intel-agp

00:01.0 PCI bridge [0604]: Intel Corporation 82945G/GZ/P/PL PCI Express Root Port [8086:2771] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: fc000000-feafffff
Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: fbf00000-fbffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: fbe00000-fbefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell OptiPlex GX620 [1028:01ad]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 21
Region 4: I/O ports at ff80 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell OptiPlex GX620 [1028:01ad]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 22
Region 4: I/O ports at ff60 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell OptiPlex GX620 [1028:01ad]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at ff40 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell OptiPlex GX620 [1028:01ad]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 4: I/O ports at ff20 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI])
Subsystem: Dell OptiPlex GX620 [1028:01ad]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 21
Region 0: Memory at ffa80800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>

00:1e.2 Multimedia audio controller [0401]: Intel Corporation 82801G (ICH7 Family) AC'97 Audio Controller [8086:27de] (rev 01)
Subsystem: Dell OptiPlex GX620 [1028:01ad]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: I/O ports at ec00 [size=256]
Region 1: I/O ports at e8c0 [size=64]
Region 2: Memory at febffa00 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at febff900 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: Intel ICH
Kernel modules: snd-intel8x0

00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: iTCO_wdt, intel-rng

00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: Dell Device [1028:01ad]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size=16]
Kernel driver in use: PIIX_IDE
Kernel modules: ata_generic, piix, ide-pci-generic

00:1f.2 IDE interface [0101]: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller [8086:27c0] (rev 01) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Dell OptiPlex GX620 [1028:01ad]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 20
Region 0: I/O ports at fe00 [size=8]
Region 1: I/O ports at fe10 [size=4]
Region 2: I/O ports at fe20 [size=8]
Region 3: I/O ports at fe30 [size=4]
Region 4: I/O ports at fea0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ata_piix, ata_generic, ide-pci-generic

00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 01)
Subsystem: Dell OptiPlex GX620 [1028:01ad]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at e8a0 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801

01:00.0 VGA compatible controller [0300]: nVidia Corporation NV44 [Quadro NVS 285] [10de:0165] (rev a1) (prog-if 00 [VGA controller])
Subsystem: nVidia Corporation Device [10de:0334]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at fd000000 (64-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at fea00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nvidia
Kernel modules: nvidiafb, nvidia

02:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express [14e4:1677] (rev 01)
Subsystem: Dell OptiPlex GX620 [1028:01ad]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fbff0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: tg3
Kernel modules: tg3



-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing'), (500, 'stable')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.26-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_AU.UTF-8, LC_CTYPE=en_AU.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.26-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92j tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo

linux-image-2.6.26-1-amd64 recommends no packages.

Versions of packages linux-image-2.6.26-1-amd64 suggests:
ii grub-pc [grub] 1.96+20080724-12 GRand Unified Bootloader, version
pn linux-doc-2.6.26 <none> (no description available)

-- debconf information:
linux-image-2.6.26-1-amd64/postinst/create-kimage-link-2.6.26-1-amd64: true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-1-amd64/postinst/kimage-is-a-directory:
linux-image-2.6.26-1-amd64/postinst/old-initrd-link-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/preinst/bootloader-initrd-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/preinst/initrd-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/postinst/old-system-map-link-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/postinst/depmod-error-initrd-2.6.26-1-amd64: false
linux-image-2.6.26-1-amd64/preinst/overwriting-modules-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/preinst/elilo-initrd-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/postinst/bootloader-error-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/preinst/abort-install-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/preinst/lilo-initrd-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/postinst/depmod-error-2.6.26-1-amd64: false
linux-image-2.6.26-1-amd64/prerm/removing-running-kernel-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/prerm/would-invalidate-boot-loader-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/postinst/bootloader-test-error-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/preinst/abort-overwrite-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/postinst/old-dir-initrd-link-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/preinst/lilo-has-ramdisk:
linux-image-2.6.26-1-amd64/preinst/failed-to-move-modules-2.6.26-1-amd64:



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 

Thread Tools




All times are GMT. The time now is 04:59 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org