FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 09-12-2008, 04:11 PM
Alexander Prinsier
 
Default Bug#498727: linux-image-2.6.26-1-686: laptop multimedia buttons generate scancodes but don't get mapped to keycodes

Package: linux-image-2.6.26-1-686
Version: 2.6.26-4
Severity: normal

On a Fujitsu Siemens Amilo Pi 1505 laptop, the multimedia buttons don't work correctly.

The mute button generates a keycode, but the volume up/down don't, and neither does the 'information' button, which
usually brings up a webbrower.

The scancodes for those keys are:

Fn+F3 == Mute: 0xe0 0x20 0xe0 0xa0
Fn+F5 == VolUp: 0xe0 0x30
Fn+F6 == VolDown: 0xe0 0x2e
I == Information: 0xe0 0x32 0xe0 0xb2

The keycode generated by the mute button is 160.

These basic things should work out of the box. It really makes the laptop experience alot less fun.
These buttons do work on Ubuntu, I don't know how they fixed it.

Alexander

-- Package-specific info:
** Version:
Linux version 2.6.26-1-686 (Debian 2.6.26-4) (waldi@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Thu Aug 28 12:00:54 UTC 2008

** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.26-1-686 root=/dev/sda5 ro

** Not tainted

** Kernel log:
[ 36.784798] lp: driver loaded but no devices found
[ 36.827608] ppdev: user-space parallel port driver
[ 37.489682] NET: Registered protocol family 10
[ 37.489682] lo: Disabled Privacy Extensions
[ 37.489682] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 40.154493] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 41.919589] Bluetooth: Core ver 2.11
[ 41.919589] NET: Registered protocol family 31
[ 41.919589] Bluetooth: HCI device and connection manager initialized
[ 41.919589] Bluetooth: HCI socket layer initialized
[ 42.031788] Bluetooth: L2CAP ver 2.9
[ 42.031788] Bluetooth: L2CAP socket layer initialized
[ 42.058992] Bluetooth: RFCOMM socket layer initialized
[ 42.058992] Bluetooth: RFCOMM TTY layer initialized
[ 42.058992] Bluetooth: RFCOMM ver 1.8
[ 42.237403] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 42.237481] PM: Writing back config space on device 0000:05:00.0 at offset 1 (was 100002, writing 100006)
[ 42.237481] firmware: requesting iwlwifi-3945-1.ucode
[ 42.372754] Registered led device: iwl-phy0:radio
[ 42.372754] Registered led device: iwl-phy0:assoc
[ 42.372754] Registered led device: iwl-phy0:RX
[ 42.372754] Registered led device: iwl-phy0:TX
[ 42.392036] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 46.619752] [drm] Initialized drm 1.1.0 20060810
[ 46.627755] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 46.627755] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 46.627755] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 82.977255] CPU0 attaching NULL sched-domain.
[ 82.977272] CPU1 attaching NULL sched-domain.
[ 83.007810] CPU0 attaching sched-domain:
[ 83.007810] domain 0: span 0-1
[ 83.007810] groups: 0 1
[ 83.007810] CPU1 attaching sched-domain:
[ 83.007810] domain 0: span 0-1
[ 83.007810] groups: 1 0
[ 393.828259] CPU0 attaching NULL sched-domain.
[ 393.828268] CPU1 attaching NULL sched-domain.
[ 393.829423] CPU0 attaching sched-domain:
[ 393.829423] domain 0: span 0-1
[ 393.829423] groups: 0 1
[ 393.829423] CPU1 attaching sched-domain:
[ 393.829423] domain 0: span 0-1
[ 393.829423] groups: 1 0
[ 402.691384] wlan0: Initial auth_alg=0
[ 402.691384] wlan0: authenticate with AP 00:17:9a:f2:12:c7
[ 402.693069] wlan0: RX authentication from 00:17:9a:f2:12:c7 (alg=0 transaction=2 status=0)
[ 402.693080] wlan0: authenticated
[ 402.693087] wlan0: associate with AP 00:17:9a:f2:12:c7
[ 402.696047] wlan0: RX AssocResp from 00:17:9a:f2:12:c7 (capab=0x431 status=0 aid=1)
[ 402.696047] wlan0: associated
[ 402.696047] wlan0: switched to short barker preamble (BSSID=00:17:9a:f2:12:c7)
[ 402.699307] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 417.628975] wlan0: no IPv6 routers present
[ 543.840992] wlan0: deauthenticate(reason=3)
[ 544.095774] ACPI: PCI interrupt for device 0000:05:00.0 disabled
[ 544.168973] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 544.168973] PM: Writing back config space on device 0000:05:00.0 at offset 1 (was 100002, writing 100006)
[ 544.226241] Registered led device: iwl-phy0:radio
[ 544.226241] Registered led device: iwl-phy0:assoc
[ 544.226241] Registered led device: iwl-phy0:RX
[ 544.226241] Registered led device: iwl-phy0:TX
[ 544.307332] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 544.371799] eth0: link down
[ 544.372190] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 544.664394] ACPI: PCI interrupt for device 0000:05:00.0 disabled
[ 544.746181] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 544.746358] PM: Writing back config space on device 0000:05:00.0 at offset 1 (was 100002, writing 100006)
[ 544.798798] Registered led device: iwl-phy0:radio
[ 544.798798] Registered led device: iwl-phy0:assoc
[ 544.798798] Registered led device: iwl-phy0:RX
[ 544.798798] Registered led device: iwl-phy0:TX
[ 544.822682] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 544.854544] eth0: link down
[ 544.854903] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 545.149286] ACPI: PCI interrupt for device 0000:05:00.0 disabled
[ 545.438997] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 545.438997] PM: Writing back config space on device 0000:05:00.0 at offset 1 (was 100002, writing 100006)
[ 545.492823] Registered led device: iwl-phy0:radio
[ 545.492852] Registered led device: iwl-phy0:assoc
[ 545.492911] Registered led device: iwl-phy0:RX
[ 545.492933] Registered led device: iwl-phy0:TX
[ 545.504266] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 559.116062] wlan0: Initial auth_alg=0
[ 559.116062] wlan0: authenticate with AP 00:17:9a:f2:12:c7
[ 559.121250] wlan0: RX authentication from 00:17:9a:f2:12:c7 (alg=0 transaction=2 status=0)
[ 559.121250] wlan0: authenticated
[ 559.121250] wlan0: associate with AP 00:17:9a:f2:12:c7
[ 559.122816] wlan0: RX AssocResp from 00:17:9a:f2:12:c7 (capab=0x431 status=0 aid=1)
[ 559.122816] wlan0: associated
[ 559.122816] wlan0: switched to short barker preamble (BSSID=00:17:9a:f2:12:c7)
[ 559.124317] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 573.772513] CPU0 attaching NULL sched-domain.
[ 573.772513] CPU1 attaching NULL sched-domain.
[ 573.796552] CPU0 attaching sched-domain:
[ 573.796552] domain 0: span 0-1
[ 573.796552] groups: 0 1
[ 573.796552] CPU1 attaching sched-domain:
[ 573.796552] domain 0: span 0-1
[ 573.796552] groups: 1 0
[ 576.474261] wlan0: no IPv6 routers present

** Loaded modules:
Module Size Used by
i915 25280 2
drm 65256 3 i915
rfcomm 28272 0
l2cap 17248 5 rfcomm
bluetooth 44900 4 rfcomm,l2cap
ipv6 235204 18
ppdev 6468 0
parport_pc 22500 0
lp 8164 0
parport 30988 3 ppdev,parport_pc,lp
acpi_cpufreq 6796 0
cpufreq_conservative 5960 0
cpufreq_powersave 1856 0
cpufreq_ondemand 6476 2
cpufreq_userspace 3172 0
cpufreq_stats 3776 0
freq_table 4224 3 acpi_cpufreq,cpufreq_ondemand,cpufreq_stats
loop 12748 0
snd_hda_intel 324248 9
arc4 1824 2
snd_pcm_oss 32800 0
ecb 2624 2
crypto_blkcipher 15236 1 ecb
snd_pcm 62628 4 snd_hda_intel,snd_pcm_oss
snd_mixer_oss 12320 1 snd_pcm_oss
iwl3945 78772 0
snd_seq_dummy 2660 0
firmware_class 6816 1 iwl3945
iTCO_wdt 9508 0
mac80211 139680 1 iwl3945
led_class 3908 1 iwl3945
snd_seq_oss 24992 0
i2c_i801 7920 0
rng_core 3940 0
pcspkr 2432 0
snd_seq_midi 5728 0
i2c_core 19828 1 i2c_i801
serio_raw 4740 0
cfg80211 21576 2 iwl3945,mac80211
psmouse 32336 0
snd_rawmidi 18560 1 snd_seq_midi
snd_seq_midi_event 6432 2 snd_seq_oss,snd_seq_midi
snd_seq 41456 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_mid i_event
snd_timer 17800 4 snd_pcm,snd_seq
snd_seq_device 6380 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi ,snd_seq
video 16400 0
output 2912 1 video
battery 10180 0
snd 45604 23 snd_hda_intel,snd_pcm_oss,snd_pcm,snd_mixer_oss,sn d_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_de vice
soundcore 6368 1 snd
ac 4196 0
snd_page_alloc 7816 2 snd_hda_intel,snd_pcm
button 6064 0
intel_agp 22300 1
agpgart 28776 3 drm,intel_agp
evdev 8000 7
ext3 105256 2
jbd 39444 1 ext3
mbcache 7108 1 ext3
ide_cd_mod 27652 0
cdrom 30176 1 ide_cd_mod
sd_mod 22200 4
piix 6568 0 [permanent]
ide_pci_generic 3908 0 [permanent]
ide_core 92628 3 ide_cd_mod,piix,ide_pci_generic
usbhid 35904 0
hid 33184 1 usbhid
ff_memless 4392 1 usbhid
8139cp 16800 0
ahci 23176 3
ata_generic 4676 0
sdhci 13060 0
mmc_core 39932 1 sdhci
libata 140416 2 ahci,ata_generic
scsi_mod 129356 2 sd_mod,libata
ohci1394 24944 0
dock 8272 1 libata
ieee1394 75800 1 ohci1394
8139too 20320 0
mii 4896 2 8139cp,8139too
ehci_hcd 28428 0
uhci_hcd 18672 0
usbcore 118160 4 usbhid,ehci_hcd,uhci_hcd
thermal 15228 0
processor 32576 4 acpi_cpufreq,thermal
fan 4164 0
thermal_sys 10856 4 video,thermal,processor,fan

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
Subsystem: Fujitsu Siemens Computers Device [1734:10c7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp

00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03)
Subsystem: Fujitsu Siemens Computers Device [1734:10c7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at b0080000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at 1800 [size=8]
Region 2: Memory at c0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at b0040000 (32-bit, non-prefetchable) [size=256K]
Capabilities: <access denied>
Kernel modules: intelfb

00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
Subsystem: Fujitsu Siemens Computers Device [1734:10c7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at b0100000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>

00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 02)
Subsystem: Fujitsu Siemens Computers Device [1734:10c7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
I/O behind bridge: 0000f000-0000ffff
Memory behind bridge: fac00000-febfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2] (rev 02)
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:1c.2 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 [8086:27d4] (rev 02)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Memory behind bridge: f7000000-f70fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 02)
Subsystem: Fujitsu Siemens Computers Device [1734:10c7]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 1820 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 02)
Subsystem: Fujitsu Siemens Computers Device [1734:10c7]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 1840 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 02)
Subsystem: Fujitsu Siemens Computers Device [1734:10c7]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 1860 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 02)
Subsystem: Fujitsu Siemens Computers Device [1734:10c7]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at 1880 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20)
Subsystem: Fujitsu Siemens Computers Device [1734:10c7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f0004000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=06, subordinate=06, sec-latency=32
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f0200000-f02fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02)
Subsystem: Fujitsu Siemens Computers Device [1734:10c7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: iTCO_wdt, intel-rng

00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Fujitsu Siemens Computers Device [1734:10c7]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 1810 [size=16]
Kernel driver in use: PIIX_IDE
Kernel modules: piix

00:1f.2 SATA controller [0106]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller [8086:27c5] (rev 02) (prog-if 01)
Subsystem: Fujitsu Siemens Computers Device [1734:10c7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 220
Region 0: I/O ports at 18d0 [size=8]
Region 1: I/O ports at 18c4 [size=4]
Region 2: I/O ports at 18c8 [size=8]
Region 3: I/O ports at 18c0 [size=4]
Region 4: I/O ports at 18b0 [size=16]
Region 5: Memory at f0004400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 02)
Subsystem: Fujitsu Siemens Computers Device [1734:10c7]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 18e0 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801

05:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG Network Connection [8086:4222] (rev 02)
Subsystem: Intel Corporation Device [8086:1001]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 219
Region 0: Memory at f7000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: iwl3945
Kernel modules: iwl3945

06:04.0 FireWire (IEEE 1394) [0c00]: O2 Micro, Inc. Firewire (IEEE 1394) [1217:00f7] (rev 02) (prog-if 10)
Subsystem: Fujitsu Siemens Computers Device [1734:10c7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping+ SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f0200000 (32-bit, non-prefetchable) [size=4K]
Region 1: Memory at b0300000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ohci1394
Kernel modules: ohci1394

06:04.2 SD Host controller [0805]: O2 Micro, Inc. Integrated MMC/SD Controller [1217:7120] (rev 01)
Subsystem: Fujitsu Siemens Computers Device [1734:10c7]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 18
Region 0: Memory at b0300800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci
Kernel modules: sdhci

06:04.3 Mass storage controller [0180]: O2 Micro, Inc. Integrated MS/xD Controller [1217:7130] (rev 01)
Subsystem: Fujitsu Siemens Computers Device [1734:10c7]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 3
Region 0: Memory at f0202000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>

06:05.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: Fujitsu Siemens Computers Device [1734:10c7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 2000 [size=256]
Region 1: Memory at b0300c00 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: 8139too
Kernel modules: 8139too, 8139cp



-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)

Kernel: Linux 2.6.26-1-686 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF8, LC_CTYPE=en_US.UTF8 (charmap=UTF-8) (ignored: LC_ALL set to en_US.UTF8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.26-1-686 depends on:
ii debconf [debconf-2.0] 1.5.22 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92i tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo

Versions of packages linux-image-2.6.26-1-686 recommends:
ii libc6-i686 2.7-13 GNU C Library: Shared libraries [i

Versions of packages linux-image-2.6.26-1-686 suggests:
ii grub-pc [grub] 1.96+20080724-10 GRand Unified Bootloader, version
pn linux-doc-2.6.26 <none> (no description available)

-- debconf information:
linux-image-2.6.26-1-686/preinst/abort-overwrite-2.6.26-1-686:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-1-686/postinst/bootloader-error-2.6.26-1-686:
linux-image-2.6.26-1-686/postinst/depmod-error-initrd-2.6.26-1-686: false
linux-image-2.6.26-1-686/prerm/removing-running-kernel-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/old-system-map-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/abort-install-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/lilo-has-ramdisk:
linux-image-2.6.26-1-686/preinst/bootloader-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/prerm/would-invalidate-boot-loader-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/elilo-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/kimage-is-a-directory:
linux-image-2.6.26-1-686/postinst/old-dir-initrd-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/create-kimage-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/lilo-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/old-initrd-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/overwriting-modules-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/depmod-error-2.6.26-1-686: false
linux-image-2.6.26-1-686/postinst/bootloader-test-error-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/failed-to-move-modules-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/initrd-2.6.26-1-686:



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 

Thread Tools




All times are GMT. The time now is 12:21 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org