FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 09-12-2008, 11:44 AM
Edsko de Vries
 
Default Bug#498702: linux-image-2.6.26-1-686: SATA DVD drive recognized in 2.6.25-2 but not in 2.6.26-1

Package: linux-image-2.6.26-1-686
Version: 2.6.26-4
Severity: important

My Sony CD-RW/DVD-ROM CRX310S was working file until apt-get upgraded
the kernel from 2.6.25-2 to 2.6.26-1 (Debian testing). The mount-point
/dev/scd0 I was using has completely disappeared; this excerpt from
dmesg seems highly relevant:

# grep ata2 2.6.25-2.dmesg
[ 2.193463] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xe008 irq 21
[ 3.302216] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.492641] ata2.00: ATAPI: SONY CD-RW/DVD-ROM CRX310S, VDK2, max UDMA/100
[ 3.695990] ata2.00: configured for UDMA/100

# grep ata2 2.6.26-1.dmesg
[ 2.246140] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xe008 irq 21
[ 3.424045] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.448038] ata2.00: NODEV after polling detection

The following modules get loaded when using 2.6.25-2 but not with 2.6.26-1:

# diff 2.6.25-2.lsmod-modules 2.6.26-1.lsmod-modules | grep '<'
< cdrom
< isofs
< nls_base
< rtc_cmos
< rtc_core
< rtc_lib
< sg
< sr_mod
< udf
< zlib_inflate

And these modules get loaded in 2.6.26-1 but not in 2.6.25-2:

# diff 2.6.25-2.lsmod-modules 2.6.26-1.lsmod-modules | grep '>'
> dm_log
> ndiswrapper
> thermal_sys

However, that appears to be a symptom rather than the cause of the problem
because when I manually modprobe the missing modules, nothing happens.

-- Package-specific info:
** Version:
Linux version 2.6.26-1-686 (Debian 2.6.26-4) (waldi@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Thu Aug 28 12:00:54 UTC 2008

** Command line:
root=/dev/sda2 ro

** Tainted: P (1)

** Kernel log:
[ 5.308284] usb 1-6: Product: USB Optical Mouse
[ 5.508336] usb 2-4.3: new high speed USB device using ehci_hcd and address 6
[ 5.601391] usb 2-4.3: configuration #1 chosen from 1 choice
[ 5.601731] hub 2-4.3:1.0: USB hub found
[ 5.602081] hub 2-4.3:1.0: 4 ports detected
[ 5.704137] usb 2-4.3: New USB device found, idVendor=05e3, idProduct=0608
[ 5.704196] usb 2-4.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 5.704258] usb 2-4.3: Product: USB2.0 Hub
[ 5.904336] usb 2-4.3.1: new high speed USB device using ehci_hcd and address 7
[ 5.998510] usb 2-4.3.1: configuration #1 chosen from 1 choice
[ 5.998952] usb 2-4.3.1: New USB device found, idVendor=058f, idProduct=6362
[ 5.999007] usb 2-4.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.999069] usb 2-4.3.1: Product: Mass Storage Device
[ 5.999119] usb 2-4.3.1: Manufacturer: Generic
[ 5.999168] usb 2-4.3.1: SerialNumber: 058F312D81B
[ 6.001099] usbcore: registered new interface driver hiddev
[ 6.007425] input: DELL DELL USB Keyboard as /class/input/input0
[ 6.016093] input,hidraw0: USB HID v1.10 Keyboard [DELL DELL USB Keyboard] on usb-0000:00:0b.0-3
[ 6.022336] input: USB Optical Mouse as /class/input/input1
[ 6.032309] input,hidraw1: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:0b.0-6
[ 6.032539] usbcore: registered new interface driver usbhid
[ 6.032591] usbhid: v2.6:USB HID core driver
[ 6.034294] Initializing USB Mass Storage driver...
[ 6.034998] scsi4 : SCSI emulation for USB Mass Storage devices
[ 6.035138] usbcore: registered new interface driver usb-storage
[ 6.035192] USB Mass Storage support registered.
[ 6.035247] usb-storage: device found at 7
[ 6.035249] usb-storage: waiting for device to settle before scanning
[ 6.170623] PM: Starting manual resume from disk
[ 6.196014] kjournald starting. Commit interval 5 seconds
[ 6.196014] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.475046] udevd version 125 started
[ 9.166653] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 9.750564] input: Power Button (FF) as /class/input/input2
[ 9.779585] ACPI: Power Button (FF) [PWRF]
[ 9.779717] input: Power Button (CM) as /class/input/input3
[ 9.808079] ACPI: Power Button (CM) [PWRB]
[ 10.735949] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
[ 10.736048] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40
[ 10.776120] usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7004
[ 10.776209] usbcore: registered new interface driver usblp
[ 11.032286] usb-storage: device scan complete
[ 11.034370] scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 11.036231] scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 11.038350] scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 11.040236] scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 11.044286] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 11.048331] sd 4:0:0:1: [sdc] Attached SCSI removable disk
[ 11.052279] sd 4:0:0:2: [sdd] Attached SCSI removable disk
[ 11.056326] sd 4:0:0:3: [sde] Attached SCSI removable disk
[ 11.518103] input: PC Speaker as /class/input/input4
[ 11.610655] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23
[ 11.610716] ACPI: PCI Interrupt 0000:00:10.1[b] -> Link [AAZA] -> GSI 23 (level, low) -> IRQ 23
[ 11.610872] PCI: Setting latency timer of device 0000:00:10.1 to 64
[ 11.628243] Error: Driver 'pcspkr' is already registered, aborting...
[ 13.673286] Adding 1317288k swap on /dev/sda5. Priority:-1 extents:1 across:1317288k
[ 14.150734] EXT3 FS on sda2, internal journal
[ 14.364516] loop: module loaded
[ 14.462498] ndiswrapper version 1.53 loaded (smp=yes, preempt=no)
[ 14.624012] ndiswrapper: driver 2802w (SMC,04/29/2004, 3.0.11.1) loaded
[ 14.648685] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[ 14.648747] ACPI: PCI Interrupt 0000:04:09.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17
[ 14.648918] PCI: Setting latency timer of device 0000:04:09.0 to 64
[ 14.649453] ndiswrapper: using IRQ 17
[ 16.020386] wlan0: ethernet device 00:04:e2:80:40:5f using NDIS driver: 2802w, version: 0x3000b, NDIS version: 0x501, vendor: 'SMC2802W 2.4GHz 54 Mbps Wireless PCI Adapter', 1260:3890.5.conf
[ 16.020508] wlan0: encryption modes supported: WEP; TKIP with WPA; AES/CCMP with WPA
[ 16.020627] usbcore: registered new interface driver ndiswrapper
[ 16.145282] device-mapper: uevent: version 1.0.3
[ 16.146706] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
[ 19.024014] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ processors (1 cpu cores) (version 2.20.00)
[ 19.024014] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x8
[ 19.024014] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xa
[ 19.024014] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12
[ 23.108185] NET: Registered protocol family 10
[ 23.108780] lo: Disabled Privacy Extensions
[ 23.110249] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 23.637746] lp: driver loaded but no devices found
[ 23.671023] ppdev: user-space parallel port driver
[ 25.000037] Clocksource tsc unstable (delta = -250005215 ns)
[ 25.905182] RPC: Registered udp transport module.
[ 25.905256] RPC: Registered tcp transport module.
[ 25.997202] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 26.104062] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 26.119420] NFSD: starting 90-second grace period
[ 28.080266] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 30.208476] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 38.770480] Linux agpgart interface v0.103
[ 41.081240] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16
[ 41.081264] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APC7] -> GSI 16 (level, low) -> IRQ 16
[ 41.081280] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 41.081701] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.09 Wed Jun 4 23:43:17 PDT 2008
[ 69.828026] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 80.296035] wlan0: no IPv6 routers present
[ 104.536019] wlan0: no IPv6 routers present
[ 583.978263] Driver 'sr' needs updating - please use bus_type methods
[ 586.639822] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 586.639822] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 586.639822] sd 4:0:0:1: Attached scsi generic sg2 type 0
[ 586.639822] sd 4:0:0:2: Attached scsi generic sg3 type 0
[ 586.639822] sd 4:0:0:3: Attached scsi generic sg4 type 0

** Loaded modules:
Module Size Used by
vfat 9152 0
fat 40864 1 vfat
isofs 28164 0
sg 26964 0
sr_mod 13316 0
cdrom 30176 1 sr_mod
udf 67748 0
nls_base 6820 4 vfat,fat,isofs,udf
crc_itu_t 2080 1 udf
zlib_inflate 14144 1 isofs
nvidia 7086148 24
agpgart 28776 1 nvidia
nfsd 186704 13
lockd 54248 1 nfsd
nfs_acl 2912 1 nfsd
auth_rpcgss 33952 1 nfsd
sunrpc 162176 11 nfsd,lockd,nfs_acl,auth_rpcgss
exportfs 3904 1 nfsd
ppdev 6468 0
parport_pc 22500 0
lp 8164 0
parport 30988 3 ppdev,parport_pc,lp
ipv6 235204 35
video 16400 0
output 2912 1 video
ac 4196 0
battery 10180 0
powernow_k8 12036 0
cpufreq_ondemand 6476 1
cpufreq_userspace 3172 0
cpufreq_stats 3776 0
freq_table 4224 3 powernow_k8,cpufreq_ondemand,cpufreq_stats
cpufreq_powersave 1856 0
cpufreq_conservative 5960 0
dm_snapshot 14340 0
dm_mirror 15104 0
dm_log 8452 1 dm_mirror
dm_mod 46184 3 dm_snapshot,dm_mirror,dm_log
ndiswrapper 152412 0
loop 12748 0
snd_hda_intel 324248 1
snd_pcm_oss 32800 0
snd_mixer_oss 12320 1 snd_pcm_oss
pcspkr 2432 0
psmouse 32336 0
serio_raw 4740 0
snd_pcm 62628 2 snd_hda_intel,snd_pcm_oss
snd_timer 17800 1 snd_pcm
k8temp 4064 0
snd 45604 7 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,sn d_timer
soundcore 6368 1 snd
snd_page_alloc 7816 2 snd_hda_intel,snd_pcm
usblp 10592 0
i2c_nforce2 5536 0
i2c_core 19828 2 nvidia,i2c_nforce2
button 6064 0
evdev 8000 3
dcdbas 6272 0
ext3 105256 1
jbd 39444 1 ext3
mbcache 7108 1 ext3
usb_storage 75936 0
usbhid 35904 0
hid 33184 1 usbhid
ff_memless 4392 1 usbhid
sd_mod 22200 3
ata_generic 4676 0
b44 22288 0
sata_nv 19208 2
libata 140416 2 ata_generic,sata_nv
scsi_mod 129356 5 sg,sr_mod,usb_storage,sd_mod,libata
dock 8272 1 libata
ssb 33476 1 b44
pcmcia 29548 1 ssb
pcmcia_core 31892 2 ssb,pcmcia
firmware_class 6816 1 pcmcia
mii 4896 1 b44
ehci_hcd 28428 0
ide_pci_generic 3908 0 [permanent]
ide_core 92628 1 ide_pci_generic
ohci_hcd 18500 0
usbcore 118160 7 ndiswrapper,usblp,usb_storage,usbhid,ehci_hcd,ohci _hcd
thermal 15228 0
processor 32576 2 powernow_k8,thermal
fan 4164 0
thermal_sys 10856 4 video,thermal,processor,fan

** PCI devices:
00:00.0 RAM memory [0500]: nVidia Corporation C51 Host Bridge [10de:02f0] (rev a2)
Subsystem: nVidia Corporation C51 Host Bridge [10de:02f0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>

00:00.1 RAM memory [0500]: nVidia Corporation C51 Memory Controller 0 [10de:02fa] (rev a2)
Subsystem: nVidia Corporation C51 Memory Controller 0 [10de:02fa]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR- INTx-

00:00.2 RAM memory [0500]: nVidia Corporation C51 Memory Controller 1 [10de:02fe] (rev a2)
Subsystem: nVidia Corporation C51 Memory Controller 1 [10de:02fe]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:00.3 RAM memory [0500]: nVidia Corporation C51 Memory Controller 5 [10de:02f8] (rev a2)
Subsystem: nVidia Corporation C51 Memory Controller 5 [10de:02f8]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:00.4 RAM memory [0500]: nVidia Corporation C51 Memory Controller 4 [10de:02f9] (rev a2)
Subsystem: nVidia Corporation C51 Memory Controller 4 [10de:02f9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:00.5 RAM memory [0500]: nVidia Corporation C51 Host Bridge [10de:02ff] (rev a2)
Subsystem: nVidia Corporation C51 Host Bridge [10de:02ff]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>

00:00.6 RAM memory [0500]: nVidia Corporation C51 Memory Controller 3 [10de:027f] (rev a2)
Subsystem: nVidia Corporation C51 Memory Controller 3 [10de:027f]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:00.7 RAM memory [0500]: nVidia Corporation C51 Memory Controller 2 [10de:027e] (rev a2)
Subsystem: nVidia Corporation C51 Memory Controller 2 [10de:027e]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:02.0 PCI bridge [0604]: nVidia Corporation C51 PCI Express Bridge [10de:02fc] (rev a1)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: fd800000-fd8fffff
Prefetchable memory behind bridge: 00000000fd700000-00000000fd7fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:03.0 PCI bridge [0604]: nVidia Corporation C51 PCI Express Bridge [10de:02fd] (rev a1)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00008000-00008fff
Memory behind bridge: fde00000-fdefffff
Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:04.0 PCI bridge [0604]: nVidia Corporation C51 PCI Express Bridge [10de:02fb] (rev a1)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fdc00000-fdcfffff
Prefetchable memory behind bridge: 00000000fd900000-00000000fd9fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:05.0 VGA compatible controller [0300]: nVidia Corporation C51 [GeForce 6150 LE] [10de:0241] (rev a2)
Subsystem: Dell Device [1028:01f4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at fb000000 (64-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at 70000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nvidia
Kernel modules: nvidiafb, nvidia

00:09.0 RAM memory [0500]: nVidia Corporation MCP51 Host Bridge [10de:0270] (rev a2)
Subsystem: nVidia Corporation Device [10de:cb84]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>

00:0a.0 ISA bridge [0601]: nVidia Corporation MCP51 LPC Bridge [10de:0260] (rev a3)
Subsystem: Dell Device [1028:01f4]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:0a.1 SMBus [0c05]: nVidia Corporation MCP51 SMBus [10de:0264] (rev a3)
Subsystem: Dell Device [1028:01f4]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 10
Region 4: I/O ports at 1c00 [size=64]
Region 5: I/O ports at 1c40 [size=64]
Capabilities: <access denied>
Kernel driver in use: nForce2_smbus
Kernel modules: i2c-nforce2

00:0a.2 RAM memory [0500]: nVidia Corporation MCP51 Memory Controller 0 [10de:0272] (rev a3)
Subsystem: Dell Device [1028:01f4]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:0b.0 USB Controller [0c03]: nVidia Corporation MCP51 USB Controller [10de:026d] (rev a3) (prog-if 10)
Subsystem: Dell Device [1028:01f4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fe02f000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd

00:0b.1 USB Controller [0c03]: nVidia Corporation MCP51 USB Controller [10de:026e] (rev a3) (prog-if 20)
Subsystem: Dell Device [1028:01f4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 22
Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd

00:0e.0 IDE interface [0101]: nVidia Corporation MCP51 Serial ATA Controller [10de:0266] (rev a1) (prog-if 85 [Master SecO PriO])
Subsystem: Dell Device [1028:01f4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at 09f0 [size=8]
Region 1: I/O ports at 0bf0 [size=4]
Region 2: I/O ports at 0970 [size=8]
Region 3: I/O ports at 0b70 [size=4]
Region 4: I/O ports at e000 [size=16]
Region 5: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sata_nv
Kernel modules: sata_nv

00:0f.0 IDE interface [0101]: nVidia Corporation MCP51 Serial ATA Controller [10de:0267] (rev a1) (prog-if 85 [Master SecO PriO])
Subsystem: Dell Device [1028:01f4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at 09e0 [size=8]
Region 1: I/O ports at 0be0 [size=4]
Region 2: I/O ports at 0960 [size=8]
Region 3: I/O ports at 0b60 [size=4]
Region 4: I/O ports at cc00 [size=16]
Region 5: Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sata_nv
Kernel modules: sata_nv

00:10.0 PCI bridge [0604]: nVidia Corporation MCP51 PCI Bridge [10de:026f] (rev a2) (prog-if 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
I/O behind bridge: 00009000-00009fff
Memory behind bridge: fdb00000-fdbfffff
Prefetchable memory behind bridge: fda00000-fdafffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>

00:10.1 Audio device [0403]: nVidia Corporation MCP51 High Definition Audio [10de:026c] (rev a2)
Subsystem: Dell Device [1028:01f4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin B routed to IRQ 23
Region 0: Memory at fe024000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel

00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>

00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k8temp
Kernel modules: k8temp

04:07.0 Ethernet controller [0200]: Broadcom Corporation BCM4401-B0 100Base-TX [14e4:170c] (rev 02)
Subsystem: Dell Device [1028:01f4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fdbfe000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: b44
Kernel modules: b44

04:09.0 Network controller [0280]: Intersil Corporation ISL3890 [Prism GT/Prism Duette]/ISL3886 [Prism Javelin/Prism Xbow] [1260:3890] (rev 01)
Subsystem: Standard Microsystems Corp [SMC] Device [10b8:2802]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 56 (2500ns min, 7000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fdbfc000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: ndiswrapper
Kernel modules: p54pci



-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable')
Architecture: i386 (i686)

Kernel: Linux 2.6.26-1-686 (SMP w/1 CPU core)
Locale: LANG=en_IE.UTF-8, LC_CTYPE=en_IE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.26-1-686 depends on:
ii debconf [debconf-2.0] 1.5.22 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92i tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo

Versions of packages linux-image-2.6.26-1-686 recommends:
ii libc6-i686 2.7-13 GNU C Library: Shared libraries [i

Versions of packages linux-image-2.6.26-1-686 suggests:
ii grub 0.97-47 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)

-- debconf information:
linux-image-2.6.26-1-686/preinst/abort-overwrite-2.6.26-1-686:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-1-686/postinst/bootloader-error-2.6.26-1-686:
linux-image-2.6.26-1-686/postinst/depmod-error-initrd-2.6.26-1-686: false
linux-image-2.6.26-1-686/prerm/removing-running-kernel-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/old-system-map-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/abort-install-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/lilo-has-ramdisk:
linux-image-2.6.26-1-686/preinst/bootloader-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/prerm/would-invalidate-boot-loader-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/elilo-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/kimage-is-a-directory:
linux-image-2.6.26-1-686/postinst/old-dir-initrd-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/create-kimage-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/lilo-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/old-initrd-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/overwriting-modules-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/depmod-error-2.6.26-1-686: false
linux-image-2.6.26-1-686/postinst/bootloader-test-error-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/failed-to-move-modules-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/initrd-2.6.26-1-686:



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 

Thread Tools




All times are GMT. The time now is 04:46 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org