FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 09-03-2008, 07:41 PM
Hakan BAYINDIR
 
Default Bug#497713: linux-image-2.6.26-1-686-bigmem: Reading speed regression when using firewire external disks

Package: linux-image-2.6.26-1-686-bigmem
Version: 2.6.26-3
Severity: important


I'm using a Maxtor One Touch 4 Plus 1TB External disk connected over
firewire for 4 months. Until 2.6.26, this disk was steadily reading
38MB/Sec and writing 26MB/Sec.

When I installed 2.6.26, reading speed dropped to a steady 24MB/Sec
while writing speed is unchanged.

Unfortunately, I've upgraded my motherboard's BIOS same day but since
the firewire connector on my audigy2ZS is reporting similar speeds with
the connector on the motherboard, I'm confident that the problem is not
BIOS related.

System is running on an Intel Core2Quad Q6600 with P35 chipset (MSI P35
Platinum) and 4GB RAM.

-- Package-specific info:
** Version:
Linux version 2.6.26-1-686-bigmem (Debian 2.6.26-3) (waldi@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Wed Aug 20 13:43:08 UTC 2008

** Command line:
root=/dev/sda1 ro vga=794

** Tainted: P W (513)

** Kernel log:
[25800.513602] [<f8eaa51b>] __ext3_get_inode_loc+0xcf/0x26c [ext3]
[25800.513613] [<c018c9ca>] __d_lookup+0x98/0xd7
[25800.513623] [<f8eafbc5>] ext3_lookup+0x21/0x9b [ext3]
[25800.513734] [<c01841ef>] do_lookup+0xb6/0x153
[25800.513742] [<c0185de1>] __link_path_walk+0x724/0xb0b
[25800.513748] [<c0190654>] mntput_no_expire+0x13/0xd9
[25800.513759] [<c01861ff>] path_walk+0x37/0x70
[25800.513765] [<c01864ae>] do_path_lookup+0x122/0x184
[25800.513771] [<c0186d0b>] __user_walk_fd+0x29/0x3a
[25800.513777] [<c0180df5>] vfs_lstat_fd+0x12/0x39
[25800.513790] [<c0180e89>] sys_lstat64+0xf/0x23
[25800.513794] [<c01e6e1e>] _atomic_dec_and_lock+0x2a/0x44
[25800.513798] [<c018c256>] dput+0x25/0xbb
[25800.513803] [<c0190654>] mntput_no_expire+0x13/0xd9
[25800.513808] [<c017c781>] filp_close+0x4d/0x53
[25800.513813] [<c017d8bb>] sys_close+0x5b/0x8d
[25800.513817] [<c0108853>] sysenter_past_esp+0x78/0xb1
[25800.513826] [<c02c0000>] pciserial_init_one+0x1d/0x100
[25800.513833] =======================
[25800.513834] ---[ end trace 880cd33b043b8688 ]---
[25800.513839] Buffer I/O error on device sdc1, logical block 0
[25800.513841] lost page write due to I/O error on sdc1
[25801.365778] ieee1394: sbp2: Logged into SBP-2 device
[25801.365836] ieee1394: sbp2: Node 1-00:1023: Max speed [S400] - Max payload [2048]
[25801.367600] scsi 10:0:0:0: Direct-Access Maxtor OneTouch 0121 PQ: 0 ANSI: 4
[25801.368076] sd 10:0:0:0: [sde] 1953525168 512-byte hardware sectors (1000205 MB)
[25801.371599] sd 10:0:0:0: [sde] Write Protect is off
[25801.371599] sd 10:0:0:0: [sde] Mode Sense: 2d 08 00 00
[25801.371599] sd 10:0:0:0: [sde] Got wrong page
[25801.371599] sd 10:0:0:0: [sde] Assuming drive cache: write through
[25801.371599] sd 10:0:0:0: [sde] 1953525168 512-byte hardware sectors (1000205 MB)
[25801.371599] sd 10:0:0:0: [sde] Write Protect is off
[25801.371599] sd 10:0:0:0: [sde] Mode Sense: 2d 08 00 00
[25801.375599] sd 10:0:0:0: [sde] Got wrong page
[25801.375599] sd 10:0:0:0: [sde] Assuming drive cache: write through
[25801.375599] sde: sde1
[25801.403600] sd 10:0:0:0: [sde] Attached SCSI disk
[25801.403600] sd 10:0:0:0: Attached scsi generic sg2 type 0
[25802.811654] hiddev96hidraw3: USB HID v1.01 Device [PHILIPS PHILIPS VOIP321] on usb-0000:00:1d.2-1
[25802.811654] usb 6-1: New USB device found, idVendor=0471, idProduct=082f
[25802.811654] usb 6-1: New USB device strings: Mfr=4, Product=20, SerialNumber=52
[25802.811654] usb 6-1: Product: PHILIPS VOIP321
[25802.811654] usb 6-1: Manufacturer: PHILIPS
[25802.811654] usb 6-1: SerialNumber: USBGAP0000000000000000000187196782
[25802.811654] usb 7-1: USB disconnect, address 4
[25803.363275] usb 7-1: new full speed USB device using uhci_hcd and address 5
[25803.570844] usb 7-1: configuration #1 chosen from 1 choice
[25803.579757] usb 7-1: New USB device found, idVendor=0a12, idProduct=0001
[25803.579757] usb 7-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[26557.888414] EXT3-fs error (device sdc1): ext3_readdir: directory #2 contains a hole at offset 0
[26557.888789] Buffer I/O error on device sdc1, logical block 0
[26557.888794] lost page write due to I/O error on sdc1
[26557.888811] EXT3-fs error (device sdc1): ext3_get_inode_loc: unable to read inode block - inode=2, block=62
[26557.889142] Buffer I/O error on device sdc1, logical block 0
[26557.889147] lost page write due to I/O error on sdc1
[26557.889153] EXT3-fs error (device sdc1) in ext3_reserve_inode_write: IO failure
[26557.889483] Buffer I/O error on device sdc1, logical block 0
[26557.889488] lost page write due to I/O error on sdc1
[26564.455371] journal_bmap: journal block not found at offset 31 on sdc1
[26564.455378] Aborting journal on device sdc1.
[26564.455386] Buffer I/O error on device sdc1, logical block 587
[26564.455391] lost page write due to I/O error on sdc1
[26578.296956] Buffer I/O error on device sdc1, logical block 587
[26578.296962] lost page write due to I/O error on sdc1
[26578.297311] Buffer I/O error on device sdc1, logical block 0
[26578.297316] lost page write due to I/O error on sdc1
[26581.714838] kjournald starting. Commit interval 5 seconds
[26581.714838] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[26581.714838] EXT3 FS on sde1, internal journal
[26581.714838] EXT3-fs: recovery complete.
[26581.718614] EXT3-fs: mounted filesystem with ordered data mode.
[29423.526000] usb 8-8: new high speed USB device using ehci_hcd and address 8
[29423.752066] usb 8-8: configuration #1 chosen from 1 choice
[29423.754447] scsi11 : SCSI emulation for USB Mass Storage devices
[29423.754454] usb-storage: device found at 8
[29423.754454] usb-storage: waiting for device to settle before scanning
[29423.754447] usb 8-8: New USB device found, idVendor=1058, idProduct=0702
[29423.754447] usb 8-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[29423.754447] usb 8-8: Product: External HDD
[29423.754447] usb 8-8: Manufacturer: Western Digital
[29423.754447] usb 8-8: SerialNumber: 5758455A3037433833333637
[29431.035706] usb-storage: device scan complete
[29431.036907] scsi 11:0:0:0: Direct-Access WD 3200BEV External 1.04 PQ: 0 ANSI: 4
[29431.038406] sd 11:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB)
[29431.038406] sd 11:0:0:0: [sdc] Write Protect is off
[29431.038407] sd 11:0:0:0: [sdc] Mode Sense: 21 00 00 00
[29431.038407] sd 11:0:0:0: [sdc] Assuming drive cache: write through
[29431.038407] sd 11:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB)
[29431.038407] sd 11:0:0:0: [sdc] Write Protect is off
[29431.038407] sd 11:0:0:0: [sdc] Mode Sense: 21 00 00 00
[29431.038407] sd 11:0:0:0: [sdc] Assuming drive cache: write through
[29431.038407] sdc: sdc1
[29431.104792] sd 11:0:0:0: [sdc] Attached SCSI disk
[29431.104792] sd 11:0:0:0: Attached scsi generic sg5 type 0
[29435.778144] kjournald starting. Commit interval 5 seconds
[29435.778722] EXT3 FS on sdc1, internal journal
[29435.778730] EXT3-fs: mounted filesystem with ordered data mode.
[37317.639501] usb 8-8: USB disconnect, address 8
[37367.778704] sr0: CDROM not ready. Make sure there is a disc in the drive.
[37999.149804] sr0: CDROM not ready. Make sure there is a disc in the drive.

** Loaded modules:
Module Size Used by
nls_utf8 2528 0
nls_cp437 6336 0
vfat 9920 0
fat 41632 1 vfat
nls_base 7588 4 nls_utf8,nls_cp437,vfat,fat
usb_storage 76576 0
nvidia 7087428 24
rfcomm 29040 4
l2cap 18016 9 rfcomm
nfsd 187472 13
lockd 55016 1 nfsd
nfs_acl 3680 1 nfsd
auth_rpcgss 34752 1 nfsd
sunrpc 162944 11 nfsd,lockd,nfs_acl,auth_rpcgss
exportfs 4672 1 nfsd
ppdev 7236 0
parport_pc 23396 0
lp 8932 0
parport 31756 3 ppdev,parport_pc,lp
video 17168 0
output 3680 1 video
ac 4032 0
battery 7040 0
acpi_cpufreq 7564 3
cpufreq_userspace 4420 0
cpufreq_stats 4640 0
cpufreq_powersave 2624 0
cpufreq_ondemand 7244 1
freq_table 5088 3 acpi_cpufreq,cpufreq_stats,cpufreq_ondemand
cpufreq_conservative 6728 0
microcode 9772 0
ipv6 235748 24
fuse 43676 1
vboxdrv 64768 0
coretemp 6272 0
f71882fg 9032 0
loop 13516 0
snd_usb_audio 71104 0
snd_usb_lib 14208 1 snd_usb_audio
snd_emu10k1_synth 6432 0
snd_emux_synth 28704 1 snd_emu10k1_synth
snd_seq_virmidi 5664 1 snd_emux_synth
snd_seq_midi_emul 6144 1 snd_emux_synth
tuner_simple 12848 1
tuner_types 14656 1 tuner_simple
tuner 22728 0
snd_emu10k1 116000 4 snd_emu10k1_synth
firmware_class 7584 2 microcode,snd_emu10k1
snd_ac97_codec 89252 1 snd_emu10k1
ac97_bus 2496 1 snd_ac97_codec
snd_pcm_oss 33568 0
snd_mixer_oss 13088 1 snd_pcm_oss
snd_pcm 63460 5 snd_usb_audio,snd_emu10k1,snd_ac97_codec,snd_pcm_o ss
snd_util_mem 4800 2 snd_emux_synth,snd_emu10k1
snd_hwdep 6980 3 snd_usb_audio,snd_emux_synth,snd_emu10k1
snd_seq_dummy 3428 0
snd_seq_oss 25760 0
snd_seq_midi 6496 0
snd_rawmidi 19328 4 snd_usb_lib,snd_seq_virmidi,snd_emu10k1,snd_seq_mi di
snd_seq_midi_event 7200 3 snd_seq_virmidi,snd_seq_oss,snd_seq_midi
saa7134 126388 0
snd_seq 42224 10 snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,s nd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi _event
videodev 28288 2 tuner,saa7134
v4l1_compat 13028 1 videodev
snd_timer 18568 3 snd_emu10k1,snd_pcm,snd_seq
compat_ioctl32 2080 1 saa7134
snd_seq_device 7148 8 snd_emu10k1_synth,snd_emux_synth,snd_emu10k1,snd_s eq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_ seq
v4l2_common 11008 2 tuner,saa7134
videobuf_dma_sg 11972 1 saa7134
videobuf_core 16868 2 saa7134,videobuf_dma_sg
ir_kbd_i2c 7888 1 saa7134
hci_usb 13020 2
snd 46372 20 snd_usb_audio,snd_emux_synth,snd_seq_virmidi,snd_e mu10k1,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,sn d_pcm,snd_hwdep,snd_seq_oss,snd_rawmidi,snd_seq,sn d_timer,snd_seq_device
ir_common 40388 2 saa7134,ir_kbd_i2c
iTCO_wdt 10276 0
bluetooth 45668 7 rfcomm,l2cap,hci_usb
emu10k1_gp 3552 0
psmouse 33104 0
pcspkr 3200 0
tveeprom 11748 1 saa7134
i2c_i801 8688 0
snd_page_alloc 8648 2 snd_emu10k1,snd_pcm
button 6832 0
serio_raw 5508 0
i2c_core 20596 8 nvidia,tuner_simple,tuner,saa7134,v4l2_common,ir_k bd_i2c,tveeprom,i2c_i801
intel_agp 23236 0
soundcore 7136 1 snd
gameport 11468 2 emu10k1_gp
agpgart 29576 2 nvidia,intel_agp
evdev 8768 5
joydev 9248 0
ext3 105992 5
jbd 40212 1 ext3
mbcache 7876 1 ext3
sg 27732 0
sr_mod 14084 0
cdrom 30944 1 sr_mod
sd_mod 22968 10
sbp2 19724 1
ata_piix 15012 5
ata_generic 5444 0
libata 141280 2 ata_piix,ata_generic
scsi_mod 130124 6 usb_storage,sg,sr_mod,sd_mod,sbp2,libata
dock 9040 1 libata
usbhid 36736 0
hid 33952 1 usbhid
ff_memless 5160 1 usbhid
ohci1394 26000 1
ieee1394 76600 2 sbp2,ohci1394
floppy 48516 0
ide_pci_generic 4676 0 [permanent]
ide_core 93460 1 ide_pci_generic
r8169 24612 0
ehci_hcd 29420 0
uhci_hcd 19504 0
usbcore 119152 8 usb_storage,snd_usb_audio,snd_usb_lib,hci_usb,usbh id,ehci_hcd,uhci_hcd
thermal 15996 0
processor 33536 2 acpi_cpufreq,thermal
fan 4932 0
thermal_sys 11624 4 video,thermal,processor,fan

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] (rev 02)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7345]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: intel-agp

00:01.0 PCI bridge [0604]: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port [8086:29c1] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fa000000-fe9fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 02)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7345]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at bc00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 02)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7345]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at b880 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 02) (prog-if 20)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7345]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f9fffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd

00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 02)
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 02)
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 [8086:294a] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fea00000-feafffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 02)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7345]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at b800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 02)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7345]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at b480 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 02)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7345]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at b400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1d.3 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 02)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7345]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at b080 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 02) (prog-if 20)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7345]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f9fff800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92) (prog-if 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: feb00000-febfffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801IR (ICH9R) LPC Interface Controller [8086:2916] (rev 02)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7345]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: iTCO_wdt

00:1f.2 IDE interface [0101]: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4 port SATA IDE Controller [8086:2920] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7345]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at b000 [size=8]
Region 1: I/O ports at ac00 [size=4]
Region 2: I/O ports at a880 [size=8]
Region 3: I/O ports at a800 [size=4]
Region 4: I/O ports at a480 [size=16]
Region 5: I/O ports at a400 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ata_piix

00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 02)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7345]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f9fff400 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0400 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801

00:1f.5 IDE interface [0101]: Intel Corporation 82801I (ICH9 Family) 2 port SATA IDE Controller [8086:2926] (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7345]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at a000 [size=8]
Region 1: I/O ports at 9c00 [size=4]
Region 2: I/O ports at 9880 [size=8]
Region 3: I/O ports at 9800 [size=4]
Region 4: I/O ports at 9480 [size=16]
Region 5: I/O ports at 9400 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ata_piix

01:00.0 VGA compatible controller [0300]: nVidia Corporation G80 [GeForce 8800 GTS] [10de:0193] (rev a2)
Subsystem: nVidia Corporation Device [10de:0421]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at fa000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at cc00 [size=128]
[virtual] Expansion ROM at fe9e0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nvidia
Kernel modules: nvidiafb, nvidia

04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
Subsystem: Micro-Star International Co., Ltd. Device [1462:345c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 219
Region 0: I/O ports at d800 [size=256]
Region 2: Memory at feaff000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at feac0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169

05:00.0 Multimedia audio controller [0401]: Creative Labs SB Audigy [1102:0004] (rev 04)
Subsystem: Creative Labs Device [1102:2002]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at ec00 [size=64]
Capabilities: <access denied>
Kernel driver in use: EMU10K1_Audigy
Kernel modules: snd-emu10k1

05:00.1 Input device controller [0980]: Creative Labs SB Audigy Game Port [1102:7003] (rev 04)
Subsystem: Creative Labs Device [1102:0040]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Region 0: I/O ports at e880 [size=8]
Capabilities: <access denied>
Kernel driver in use: Emu10k1_gameport
Kernel modules: emu10k1-gp

05:00.2 FireWire (IEEE 1394) [0c00]: Creative Labs SB Audigy FireWire Port [1102:4001] (rev 04) (prog-if 10)
Subsystem: Creative Labs Device [1102:0010]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at febff800 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at febf8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: ohci1394
Kernel modules: ohci1394

05:01.0 Multimedia controller [0480]: Philips Semiconductors SAA7130 Video Broadcast Decoder [1131:7130] (rev 01)
Subsystem: Animation Technologies Inc. Device [5168:0138]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (4000ns min, 10000ns max)
Interrupt: pin A routed to IRQ 17
Region 0: Memory at febff400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: saa7134
Kernel modules: saa7134

05:02.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. IEEE 1394 Host Controller [1106:3044] (rev c0) (prog-if 10)
Subsystem: Micro-Star International Co., Ltd. Device [1462:345d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at febfe800 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at e800 [size=128]
Capabilities: <access denied>
Kernel driver in use: ohci1394
Kernel modules: ohci1394



-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)

Kernel: Linux 2.6.26-1-686-bigmem (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.26-1-686-bigmem depends on:
ii debconf [debconf-2.0] 1.5.22 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92f tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo

Versions of packages linux-image-2.6.26-1-686-bigmem recommends:
ii libc6-i686 2.7-13 GNU C Library: Shared libraries [i

Versions of packages linux-image-2.6.26-1-686-bigmem suggests:
ii grub 0.97-46 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)

-- debconf information:
linux-image-2.6.26-1-686-bigmem/preinst/elilo-initrd-2.6.26-1-686-bigmem: true
linux-image-2.6.26-1-686-bigmem/postinst/create-kimage-link-2.6.26-1-686-bigmem: true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-1-686-bigmem/preinst/overwriting-modules-2.6.26-1-686-bigmem: true
linux-image-2.6.26-1-686-bigmem/postinst/depmod-error-initrd-2.6.26-1-686-bigmem: false
linux-image-2.6.26-1-686-bigmem/prerm/would-invalidate-boot-loader-2.6.26-1-686-bigmem: true
linux-image-2.6.26-1-686-bigmem/postinst/old-initrd-link-2.6.26-1-686-bigmem: true
linux-image-2.6.26-1-686-bigmem/postinst/bootloader-error-2.6.26-1-686-bigmem:
linux-image-2.6.26-1-686-bigmem/preinst/initrd-2.6.26-1-686-bigmem:
linux-image-2.6.26-1-686-bigmem/postinst/depmod-error-2.6.26-1-686-bigmem: false
linux-image-2.6.26-1-686-bigmem/postinst/old-dir-initrd-link-2.6.26-1-686-bigmem: true
linux-image-2.6.26-1-686-bigmem/preinst/lilo-has-ramdisk:
linux-image-2.6.26-1-686-bigmem/postinst/bootloader-test-error-2.6.26-1-686-bigmem:
linux-image-2.6.26-1-686-bigmem/postinst/old-system-map-link-2.6.26-1-686-bigmem: true
linux-image-2.6.26-1-686-bigmem/prerm/removing-running-kernel-2.6.26-1-686-bigmem: true
linux-image-2.6.26-1-686-bigmem/postinst/kimage-is-a-directory:
linux-image-2.6.26-1-686-bigmem/preinst/failed-to-move-modules-2.6.26-1-686-bigmem:
linux-image-2.6.26-1-686-bigmem/preinst/abort-overwrite-2.6.26-1-686-bigmem:
linux-image-2.6.26-1-686-bigmem/preinst/abort-install-2.6.26-1-686-bigmem:
linux-image-2.6.26-1-686-bigmem/preinst/lilo-initrd-2.6.26-1-686-bigmem: true
linux-image-2.6.26-1-686-bigmem/preinst/bootloader-initrd-2.6.26-1-686-bigmem: true



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 

Thread Tools




All times are GMT. The time now is 04:27 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org