Package: linux-image-2.6.26-1-686-bigmem
Version: 2.6.26-3
Severity: normal


The separate Arrow-keys, Home,End,Page-Down, Page-Up and Insert-key are not
working on a console ttyx or in vim after upgrading and booting Kernel 2.6.26.
There is no Problem when working in an xterm.
The problem does not occur, when booting Kernel 2.6.25-2-686-bigmem.


-- Package-specific info:
** Version:
Linux version 2.6.26-1-686-bigmem (Debian 2.6.26-3) (waldi@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Wed Aug 20 13:43:08 UTC 2008

** Command line:
root=/dev/mapper/vg1-Root ro

** Not tainted

** Kernel log:
[ 6.401925] ata3: SATA link down (SStatus 0 SControl 300)
[ 6.509931] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d8000161b783]
[ 6.736134] ata4: SATA link down (SStatus 0 SControl 300)
[ 6.768373] Driver 'sd' needs updating - please use bus_type methods
[ 6.768373] sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB)
[ 6.768373] sd 0:0:0:0: [sda] Write Protect is off
[ 6.768373] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.768373] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.768373] sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB)
[ 6.768373] sd 0:0:0:0: [sda] Write Protect is off
[ 6.768373] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.768373] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.768373] sda: sda1 sda2
[ 6.772374] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.971085] device-mapper: uevent: version 1.0.3
[ 6.971085] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
[ 10.503706] usb-storage: device scan complete
[ 11.274197] scsi 2:0:0:0: Direct-Access OTi CF CARD Reader 2.00 PQ: 0 ANSI: 0 CCS
[ 11.287795] scsi 2:0:0:1: Direct-Access OTi SM CARD Reader 2.00 PQ: 0 ANSI: 0 CCS
[ 11.301544] scsi 2:0:0:2: Direct-Access OTi SD CARD Reader 2.00 PQ: 0 ANSI: 0 CCS
[ 11.316047] scsi 2:0:0:3: Direct-Access OTi MS CARD Reader 2.00 PQ: 0 ANSI: 0 CCS
[ 11.336045] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 11.348045] sd 2:0:0:1: [sdc] Attached SCSI removable disk
[ 11.367854] sd 2:0:0:2: [sdd] Attached SCSI removable disk
[ 11.396018] sd 2:0:0:3: [sde] Attached SCSI removable disk
[ 17.502181] PM: Starting manual resume from disk
[ 17.571487] kjournald starting. Commit interval 5 seconds
[ 17.571487] EXT3-fs: mounted filesystem with ordered data mode.
[ 19.331174] udevd version 125 started
[ 20.093884] input: Power Button (FF) as /class/input/input1
[ 20.143633] ACPI: Power Button (FF) [PWRF]
[ 20.143744] input: Power Button (CM) as /class/input/input2
[ 20.199638] ACPI: Power Button (CM) [PWRB]
[ 20.781852] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00
[ 20.781913] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40
[ 20.979558] usbcore: registered new interface driver usbserial
[ 20.979612] usbserial: USB Serial support registered for generic
[ 20.979669] usbcore: registered new interface driver usbserial_generic
[ 20.979707] usbserial: USB Serial Driver core
[ 20.988648] usbserial: USB Serial support registered for Reiner SCT Cyberjack USB card reader
[ 20.988648] cyberjack 1-2:1.0: Reiner SCT Cyberjack USB card reader converter detected
[ 20.988648] usb 1-2: Reiner SCT Cyberjack USB card reader converter now attached to ttyUSB0
[ 20.988648] usbcore: registered new interface driver cyberjack
[ 20.988648] cyberjack: v1.01 Matthias Bruestle
[ 20.988648] cyberjack: REINER SCT cyberJack pinpad/e-com USB Chipcard Reader Driver
[ 21.045602] input: PC Speaker as /class/input/input3
[ 21.488989] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
[ 21.489033] ACPI: PCI Interrupt 0000:00:10.1[b] -> Link [AAZA] -> GSI 22 (level, low) -> IRQ 22
[ 21.489145] PCI: Setting latency timer of device 0000:00:10.1 to 64
[ 21.521388] Error: Driver 'pcspkr' is already registered, aborting...
[ 21.908370] input: ImExPS/2 Generic Explorer Mouse as /class/input/input4
[ 21.948344] parport_pc 00:0a: reported by Plug and Play ACPI
[ 21.948416] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 22.861674] EXT3 FS on dm-1, internal journal
[ 23.683733] rtc: lost 31 interrupts
[ 24.002697] loop: module loaded
[ 24.095418] powernow-k8: Found 1 AMD Athlon(tm) X2 Dual Core Processor BE-2350 processors (2 cpu cores) (version 2.20.00)
[ 24.095418] powernow-k8: 0 : fid 0xd (2100 MHz), vid 0xc
[ 24.095418] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0xd
[ 24.095418] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xf
[ 24.095418] powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12
[ 24.158997] tun: Universal TUN/TAP device driver, 1.6
[ 24.158997] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 27.863690] fuse init (API version 7.9)
[ 27.949197] kjournald starting. Commit interval 5 seconds
[ 27.949197] EXT3 FS on sda1, internal journal
[ 27.949197] EXT3-fs: mounted filesystem with ordered data mode.
[ 28.093198] kjournald starting. Commit interval 5 seconds
[ 28.093198] EXT3 FS on dm-7, internal journal
[ 28.093198] EXT3-fs: mounted filesystem with ordered data mode.
[ 28.164245] kjournald starting. Commit interval 5 seconds
[ 28.164245] EXT3 FS on dm-4, internal journal
[ 28.164245] EXT3-fs: mounted filesystem with ordered data mode.
[ 28.205621] kjournald starting. Commit interval 5 seconds
[ 28.205621] EXT3 FS on dm-5, internal journal
[ 28.205621] EXT3-fs: mounted filesystem with ordered data mode.
[ 28.344642] kjournald starting. Commit interval 5 seconds
[ 28.344642] EXT3 FS on dm-8, internal journal
[ 28.347427] EXT3-fs: mounted filesystem with ordered data mode.
[ 28.407136] kjournald starting. Commit interval 5 seconds
[ 28.407364] EXT3 FS on dm-2, internal journal
[ 28.407425] EXT3-fs: mounted filesystem with ordered data mode.
[ 28.440705] kjournald starting. Commit interval 5 seconds
[ 28.440705] EXT3 FS on dm-3, internal journal
[ 28.440705] EXT3-fs: mounted filesystem with ordered data mode.
[ 28.746852] Adding 499704k swap on /dev/mapper/vg1-swap. Priority:-1 extents:1 across:499704k
[ 29.849059] Bridge firewalling registered
[ 29.849059] br0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
[ 29.856383] device eth0 entered promiscuous mode
[ 29.863612] br0: port 1(eth0) entering learning state
[ 34.542878] NET: Registered protocol family 10
[ 34.542878] lo: Disabled Privacy Extensions
[ 40.151147] lp0: using parport0 (interrupt-driven).
[ 40.203736] ppdev: user-space parallel port driver
[ 40.251016] Clocksource tsc unstable (delta = -73676035 ns)
[ 44.120983] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 45.250413] eth0: no IPv6 routers present
[ 45.534817] br0: topology change detected, propagating
[ 45.534857] br0: port 1(eth0) entering forwarding state
[ 46.124821] br0: no IPv6 routers present

** Loaded modules:
Module Size Used by
ppdev 7236 0
lp 8932 0
video 17168 0
output 3680 1 video
ac 4032 0
battery 7040 0
cpufreq_ondemand 7244 0
cpufreq_stats 4640 0
cpufreq_powersave 2624 0
cpufreq_conservative 6728 0
cpufreq_userspace 4420 1
ipv6 235748 16
bridge 40792 0
fuse 43676 1
tun 9060 0
powernow_k8 12804 1
freq_table 5088 3 cpufreq_ondemand,cpufreq_stats,powernow_k8
loop 13516 0
parport_pc 23396 1
snd_hda_intel 325112 0
psmouse 33104 0
parport 31756 3 ppdev,lp,parport_pc
serio_raw 5508 0
snd_pcm_oss 33568 0
snd_mixer_oss 13088 1 snd_pcm_oss
snd_pcm 63460 2 snd_hda_intel,snd_pcm_oss
snd_timer 18568 1 snd_pcm
pcspkr 3200 0
k8temp 4832 0
cyberjack 8484 0
snd 46372 5 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,sn d_timer
usbserial 27240 1 cyberjack
soundcore 7136 1 snd
snd_page_alloc 8648 2 snd_hda_intel,snd_pcm
i2c_nforce2 6400 0
i2c_core 20596 1 i2c_nforce2
button 6832 0
evdev 8768 3
ext3 105992 8
jbd 40212 1 ext3
mbcache 7876 1 ext3
sha256_generic 12128 0
aes_i586 8512 2
aes_generic 30024 1 aes_i586
cbc 4032 1
dm_crypt 11940 1
crypto_blkcipher 16004 3 cbc,dm_crypt
dm_mirror 15872 0
dm_log 9220 1 dm_mirror
dm_snapshot 15108 0
dm_mod 46952 23 dm_crypt,dm_mirror,dm_log,dm_snapshot
sd_mod 22968 3
usb_storage 76576 0
ide_cd_mod 28452 0
cdrom 30944 1 ide_cd_mod
sata_nv 20040 2
ata_generic 5444 0
libata 141280 2 sata_nv,ata_generic
scsi_mod 130124 3 sd_mod,usb_storage,libata
dock 9040 1 libata
ohci1394 26000 0
ieee1394 76600 1 ohci1394
ehci_hcd 29420 0
ohci_hcd 19428 0
ide_pci_generic 4676 0 [permanent]
forcedeth 46384 0
amd74xx 8520 0 [permanent]
ide_core 93460 3 ide_cd_mod,ide_pci_generic,amd74xx
usbcore 119152 6 cyberjack,usbserial,usb_storage,ehci_hcd,ohci_hcd
thermal 15996 0
processor 33536 2 powernow_k8,thermal
fan 4932 0
thermal_sys 11624 4 video,thermal,processor,fan

** PCI devices:
00:00.0 RAM memory [0500]: nVidia Corporation C51 Host Bridge [10de:02f0] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:81c0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>

00:00.1 RAM memory [0500]: nVidia Corporation C51 Memory Controller 0 [10de:02fa] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:81c0]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR- INTx-

00:00.2 RAM memory [0500]: nVidia Corporation C51 Memory Controller 1 [10de:02fe] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:81c0]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:00.3 RAM memory [0500]: nVidia Corporation C51 Memory Controller 5 [10de:02f8] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:81c0]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:00.4 RAM memory [0500]: nVidia Corporation C51 Memory Controller 4 [10de:02f9] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:81c0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:00.5 RAM memory [0500]: nVidia Corporation C51 Host Bridge [10de:02ff] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:81c0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>

00:00.6 RAM memory [0500]: nVidia Corporation C51 Memory Controller 3 [10de:027f] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:81c0]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:00.7 RAM memory [0500]: nVidia Corporation C51 Memory Controller 2 [10de:027e] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:81c0]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:05.0 VGA compatible controller [0300]: nVidia Corporation C51PV [GeForce 6150] [10de:0240] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:81cd]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 5
Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at fb000000 (64-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at f0000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel modules: nvidiafb

00:09.0 RAM memory [0500]: nVidia Corporation MCP51 Host Bridge [10de:0270] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:81c0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>

00:0a.0 ISA bridge [0601]: nVidia Corporation MCP51 LPC Bridge [10de:0260] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:81c0]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:0a.1 SMBus [0c05]: nVidia Corporation MCP51 SMBus [10de:0264] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:81c0]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 255
Region 4: I/O ports at 4c00 [size=64]
Region 5: I/O ports at 4c40 [size=64]
Capabilities: <access denied>
Kernel driver in use: nForce2_smbus
Kernel modules: i2c-nforce2

00:0a.2 RAM memory [0500]: nVidia Corporation MCP51 Memory Controller 0 [10de:0272] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:81c0]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:0b.0 USB Controller [0c03]: nVidia Corporation MCP51 USB Controller [10de:026d] (rev a2) (prog-if 10)
Subsystem: ASUSTeK Computer Inc. Device [1043:81c0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fe02f000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd

00:0b.1 USB Controller [0c03]: nVidia Corporation MCP51 USB Controller [10de:026e] (rev a2) (prog-if 20)
Subsystem: ASUSTeK Computer Inc. Device [1043:81c0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 22
Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd

00:0d.0 IDE interface [0101]: nVidia Corporation MCP51 IDE [10de:0265] (rev a1) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. Device [1043:81c0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
Region 4: I/O ports at f400 [size=16]
Capabilities: <access denied>
Kernel driver in use: AMD_IDE
Kernel modules: amd74xx

00:0e.0 IDE interface [0101]: nVidia Corporation MCP51 Serial ATA Controller [10de:0266] (rev a1) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:81c0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at 09f0 [size=8]
Region 1: I/O ports at 0bf0 [size=4]
Region 2: I/O ports at 0970 [size=8]
Region 3: I/O ports at 0b70 [size=4]
Region 4: I/O ports at e000 [size=16]
Region 5: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sata_nv
Kernel modules: sata_nv

00:0f.0 IDE interface [0101]: nVidia Corporation MCP51 Serial ATA Controller [10de:0267] (rev a1) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:81c0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 23
Region 0: I/O ports at 09e0 [size=8]
Region 1: I/O ports at 0be0 [size=4]
Region 2: I/O ports at 0960 [size=8]
Region 3: I/O ports at 0b60 [size=4]
Region 4: I/O ports at cc00 [size=16]
Region 5: Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sata_nv
Kernel modules: sata_nv

00:10.0 PCI bridge [0604]: nVidia Corporation MCP51 PCI Bridge [10de:026f] (rev a2) (prog-if 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=128
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fdd00000-fddfffff
Prefetchable memory behind bridge: fde00000-fdefffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR+
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>

00:10.1 Audio device [0403]: nVidia Corporation MCP51 High Definition Audio [10de:026c] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:81cb]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin B routed to IRQ 22
Region 0: Memory at fe024000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel

00:14.0 Bridge [0680]: nVidia Corporation MCP51 Ethernet Controller [10de:0269] (rev a1)
Subsystem: ASUSTeK Computer Inc. Device [1043:816a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 21
Region 0: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at c800 [size=8]
Capabilities: <access denied>
Kernel driver in use: forcedeth
Kernel modules: forcedeth

00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>

00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k8temp
Kernel modules: k8temp

01:05.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) [104c:8023] (prog-if 10)
Subsystem: ASUSTeK Computer Inc. Device [1043:808b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fddff000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at fddf8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: ohci1394
Kernel modules: ohci1394



-- System Information:
Debian Release: Lenny
Architecture: i386 (i686)

Kernel: Linux 2.6.26-1-686-bigmem (SMP w/2 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.26-1-686-bigmem depends on:
ii debconf [debconf-2.0] 1.5.22 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92f tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo

Versions of packages linux-image-2.6.26-1-686-bigmem recommends:
ii libc6-i686 2.7-13 GNU C Library: Shared libraries [i

Versions of packages linux-image-2.6.26-1-686-bigmem suggests:
ii grub 0.97-46 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)

-- debconf information:
linux-image-2.6.26-1-686-bigmem/preinst/elilo-initrd-2.6.26-1-686-bigmem: true
linux-image-2.6.26-1-686-bigmem/postinst/create-kimage-link-2.6.26-1-686-bigmem: true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-1-686-bigmem/preinst/overwriting-modules-2.6.26-1-686-bigmem: true
linux-image-2.6.26-1-686-bigmem/postinst/depmod-error-initrd-2.6.26-1-686-bigmem: false
linux-image-2.6.26-1-686-bigmem/prerm/would-invalidate-boot-loader-2.6.26-1-686-bigmem: true
linux-image-2.6.26-1-686-bigmem/postinst/old-initrd-link-2.6.26-1-686-bigmem: true
linux-image-2.6.26-1-686-bigmem/postinst/bootloader-error-2.6.26-1-686-bigmem:
linux-image-2.6.26-1-686-bigmem/preinst/initrd-2.6.26-1-686-bigmem:
linux-image-2.6.26-1-686-bigmem/postinst/depmod-error-2.6.26-1-686-bigmem: false
linux-image-2.6.26-1-686-bigmem/postinst/old-dir-initrd-link-2.6.26-1-686-bigmem: true
linux-image-2.6.26-1-686-bigmem/preinst/lilo-has-ramdisk:
linux-image-2.6.26-1-686-bigmem/postinst/bootloader-test-error-2.6.26-1-686-bigmem:
linux-image-2.6.26-1-686-bigmem/postinst/old-system-map-link-2.6.26-1-686-bigmem: true
linux-image-2.6.26-1-686-bigmem/prerm/removing-running-kernel-2.6.26-1-686-bigmem: true
linux-image-2.6.26-1-686-bigmem/postinst/kimage-is-a-directory:
linux-image-2.6.26-1-686-bigmem/preinst/failed-to-move-modules-2.6.26-1-686-bigmem:
linux-image-2.6.26-1-686-bigmem/preinst/abort-overwrite-2.6.26-1-686-bigmem:
linux-image-2.6.26-1-686-bigmem/preinst/abort-install-2.6.26-1-686-bigmem:
linux-image-2.6.26-1-686-bigmem/preinst/lilo-initrd-2.6.26-1-686-bigmem: true
linux-image-2.6.26-1-686-bigmem/preinst/bootloader-initrd-2.6.26-1-686-bigmem: true



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org