FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 08-20-2008, 11:50 PM
Thiemo Nagel
 
Default Bug#456763: reproducible on 2.6.25-2-amd64

Hello,

I can reproduce this problem with high reliability when putting load on
an encrypted filesystem using 'stress -d 10'. Then typing into
'Konsole' looks like that:


asdfjkl;asdfjkl;asdfjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj jjjjjjjjjjjjjjkl;asdfj
kl;asdfjkl;asdfjkl;asdfjkl;asdfjkl;asdfjkl;asdfjkl ;asdfjkkkkkkkkkkkkkkkk
kl;asdfjkl;aasdfjkl;asdfjkl;asdfjkkkkkkkkl;asdffjk kkkl;asddddddddddddddd
dddddddddddddddddddddddddddddddddddddddddddddfjkl; asdfjkl;asdfjkl;;;;;;;
;;;;;;;;;;;;;;;;;;;;asdfjkl;;;;;;;;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;asdfjkl;asdfjkl;asdfjkl;asdfjkl;

The results with 'Gnome Terminal' were similar, however up to now I
failed to see repeated keys on the text console.


The interesting thing is that the issue fails to reproduce when I'm
stress'ing the local disk without devmapper/LUKS.


My lvm2 setup looks like that (I did that with the lenny installer, I
have the impression that it's a bit too complicated...):


PV "/dev/sda5"
|
\_ VG "big_volume_group"
|
\_ LV "/dev/big_volume_group/big_log_vol"
|
\_ PV "/dev/dm-1"
|
\_ VG "crypto-VG"
|
+- LV "/dev/crypto-VG/swap_lv" -- mounted swap
|
- LV "/dev/crypto-VG/root_lv" -- mounted /

Output of pvdisplay, vgdisplay and lvdisplay is attached.

I'm also attaching the system configuration info generated by reportbug.
In case you need more info, just ask. I'm willing to investigate further.


Kind regards,

Thiemo Nagel
--
+-------------------------+-------------------------+
| TU Muenchen | Room PH1 3558 |
| Physik-Department E18 | |
| James-Franck-Strasse | Phone +49 89 289-12592 |
| D-85747 Garching | Fax +49 89 289-12570 |
+-------------------------+-------------------------+
Package: linux-image-2.6.25-2-amd64
Version: 2.6.25-7
Severity: normal

-- Package-specific info:
** Version:
Linux version 2.6.25-2-amd64 (Debian 2.6.25-7) (maks@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Mon Jul 14 11:05:23 UTC 2008

** Command line:
root=/dev/mapper/crypto--VG-root_lv ro quiet

** Tainted: P (1)

** Kernel log:
[ 5.784720] ata2: SATA link down (SStatus 0 SControl 300)
[ 5.643174] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23
[ 5.643178] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 23 (level, low) -> IRQ 23
[ 5.643183] sata_nv 0000:00:08.0: Using ADMA mode
[ 5.643235] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 5.643352] scsi2 : sata_nv
[ 5.643712] scsi3 : sata_nv
[ 5.643893] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc000 irq 23
[ 5.643896] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc008 irq 23
[ 6.253660] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6.123009] ata3.00: ATA-8: ST3500320AS, SD15, max UDMA/133
[ 6.123009] ata3.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 6.142626] ata3.00: configured for UDMA/133
[ 6.592585] ata4: SATA link down (SStatus 0 SControl 300)
[ 6.454184] scsi 2:0:0:0: Direct-Access ATA ST3500320AS SD15 PQ: 0 ANSI: 5
[ 6.454184] ata3: DMA mask 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
[ 6.486218] Driver 'sd' needs updating - please use bus_type methods
[ 6.486324] sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[ 6.486342] sd 2:0:0:0: [sda] Write Protect is off
[ 6.486345] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.486373] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.486438] sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[ 6.486453] sd 2:0:0:0: [sda] Write Protect is off
[ 6.486455] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.486481] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.486484] sda:<6>hda: ATAPI 48X CD-ROM drive, 128kB Cache
[ 6.623202] Uniform CD-ROM driver Revision: 3.20
[ 6.627155] hdc: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
[ 6.497015] sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 6.526098] sd 2:0:0:0: [sda] Attached SCSI disk
[ 6.994773] device-mapper: uevent: version 1.0.3
[ 6.995328] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
[ 24.767336] PM: Starting manual resume from disk
[ 24.827564] kjournald starting. Commit interval 5 seconds
[ 24.816092] EXT3-fs: mounted filesystem with ordered data mode.
[ 27.115673] udevd version 125 started
[ 27.784989] input: Power Button (FF) as /class/input/input2
[ 27.845750] ACPI: Power Button (FF) [PWRF]
[ 27.845875] input: Power Button (CM) as /class/input/input3
[ 27.905736] ACPI: Power Button (CM) [PWRB]
[ 28.410050] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00
[ 28.410115] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40
[ 28.318892] ath_hal: module license 'Proprietary' taints kernel.
[ 28.335524] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
[ 28.522382] wlan: 0.9.4
[ 28.549359] ath_pci: 0.9.4
[ 28.549437] ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17
[ 29.132437] pnp: the driver 'parport_pc' has been registered
[ 29.132457] parport_pc 00:0a: reported by Plug and Play ACPI
[ 29.132523] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 29.146464] input: PC Speaker as /class/input/input4
[ 29.237975] parport_pc 00:0a: driver attached
[ 29.303369] ath_rate_sample: 1.2 (0.9.4)
[ 29.481307] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[ 29.481468] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 29.481822] wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 29.482058] wifi0: H/W encryption support: WEP AES AES_CCM TKIP
[ 29.482213] wifi0: mac 7.9 phy 4.5 radio 5.6
[ 29.482299] wifi0: Use hw queue 1 for WME_AC_BE traffic
[ 29.482339] wifi0: Use hw queue 0 for WME_AC_BK traffic
[ 29.482380] wifi0: Use hw queue 2 for WME_AC_VI traffic
[ 29.482420] wifi0: Use hw queue 3 for WME_AC_VO traffic
[ 29.482461] wifi0: Use hw queue 8 for CAB traffic
[ 29.482500] wifi0: Use hw queue 9 for beacons
[ 29.513084] pnp: the driver 'rtc_cmos' has been registered
[ 29.513105] rtc_cmos 00:05: disabling not supported
[ 29.513112] rtc_cmos: probe of 00:05 failed with error -16
[ 29.534391] wifi0: Atheros 5212: mem=0xfdfe0000, irq=17
[ 29.394598] udev: renamed network interface ath0 to wlan0
[ 30.243576] usbcore: registered new interface driver snd-usb-audio
[ 30.401612] input: ImPS/2 Logitech Wheel Mouse as /class/input/input5
[ 32.945104] EXT3 FS on dm-3, internal journal
[ 33.566302] loop: module loaded
[ 34.809888] kjournald starting. Commit interval 5 seconds
[ 35.380340] EXT3 FS on sda6, internal journal
[ 35.380340] EXT3-fs: mounted filesystem with ordered data mode.
[ 34.925629] kjournald starting. Commit interval 5 seconds
[ 35.505314] EXT3 FS on dm-4, internal journal
[ 35.505382] EXT3-fs: mounted filesystem with ordered data mode.
[ 34.999090] kjournald starting. Commit interval 5 seconds
[ 35.572826] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 35.573210] EXT3 FS on sda3, internal journal
[ 35.573210] EXT3-fs: mounted filesystem with ordered data mode.
[ 35.060244] Adding 2097144k swap on /dev/mapper/crypto--VG-swap_lv. Priority:-1 extents:1 across:2097144k
[ 38.310795] RPC: Registered udp transport module.
[ 38.310850] RPC: Registered tcp transport module.
[ 38.543254] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 41.437612] powernow-k8: Found 1 AMD Athlon(tm) X2 Dual Core Processor BE-2300 processors (2 cpu cores) (version 2.20.00)
[ 40.566395] powernow-k8: 0 : fid 0xb (1900 MHz), vid 0xe
[ 40.566440] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xf
[ 40.566482] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x16
[ 44.313869] NET: Registered protocol family 10
[ 44.314806] lo: Disabled Privacy Extensions
[ 45.373014] lp0: using parport0 (interrupt-driven).
[ 46.760089] ppdev: user-space parallel port driver
[ 45.621926] Clocksource tsc unstable (delta = -96626296 ns)
[ 51.312873] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 63.155488] wlan0: no IPv6 routers present
[ 70.315937] eth0: no IPv6 routers present
[ 7099.632824] wifi0: ath_chan_set: unable to reset channel 1 (2412 MHz) flags 0xc0 'Hardware didn't respond as expected' (HAL status 3)

** Loaded modules:
Module Size Used by
ppdev 13832 0
lp 17540 0
ipv6 294120 22
video 27412 0
output 8704 1 video
ac 9344 0
battery 14208 0
powernow_k8 19076 1
cpufreq_userspace 9092 0
cpufreq_powersave 6272 0
cpufreq_ondemand 13712 1
cpufreq_conservative 13320 0
cpufreq_stats 10528 0
freq_table 9728 3 powernow_k8,cpufreq_ondemand,cpufreq_stats
nfsd 261032 4
auth_rpcgss 52512 1 nfsd
exportfs 9472 1 nfsd
nfs 261232 1
lockd 73904 3 nfsd,nfs
nfs_acl 8192 2 nfsd,nfs
sunrpc 206984 16 nfsd,auth_rpcgss,nfs,lockd,nfs_acl
loop 23044 0
snd_usb_audio 97056 1
snd_usb_lib 22656 1 snd_usb_audio
snd_hwdep 14856 1 snd_usb_audio
snd_pcm_oss 46752 0
snd_pcm 88072 2 snd_usb_audio,snd_pcm_oss
snd_page_alloc 15120 1 snd_pcm
snd_mixer_oss 21376 1 snd_pcm_oss
snd_seq_dummy 8580 0
snd_seq_oss 36736 0
snd_seq_midi 13376 0
snd_rawmidi 31008 2 snd_usb_lib,snd_seq_midi
snd_seq_midi_event 12544 2 snd_seq_oss,snd_seq_midi
wlan_scan_sta 18176 1
snd_seq 58912 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_mid i_event
rtc_cmos 15544 0
rtc_core 24772 1 rtc_cmos
ath_rate_sample 17280 1
psmouse 45724 0
snd_timer 29328 2 snd_pcm,snd_seq
snd_seq_device 12948 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi ,snd_seq
rtc_lib 7680 1 rtc_core
pcspkr 7808 0
parport_pc 34344 1
parport 44848 3 ppdev,lp,parport_pc
k8temp 10624 0
serio_raw 11652 0
snd 66888 12 snd_usb_audio,snd_hwdep,snd_pcm_oss,snd_pcm,snd_mi xer_oss,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer, snd_seq_device
ath_pci 100272 0
wlan 205984 4 wlan_scan_sta,ath_rate_sample,ath_pci
ath_hal 222576 3 ath_rate_sample,ath_pci
soundcore 13088 1 snd
i2c_nforce2 11904 0
i2c_core 30752 1 i2c_nforce2
button 13856 0
evdev 17408 3
ext3 139408 4
jbd 55336 1 ext3
mbcache 13956 1 ext3
sha256_generic 13952 0
aes_x86_64 12928 2
aes_generic 32424 1 aes_x86_64
cbc 8960 1
dm_crypt 20488 1
crypto_blkcipher 24324 3 cbc,dm_crypt
dm_mirror 31748 0
dm_snapshot 22472 0
dm_mod 68536 14 dm_crypt,dm_mirror,dm_snapshot
ide_cd_mod 41504 0
sd_mod 33728 4
cdrom 39464 1 ide_cd_mod
ide_pci_generic 9476 0 [permanent]
amd74xx 13576 0 [permanent]
ide_core 138160 3 ide_cd_mod,ide_pci_generic,amd74xx
sata_nv 32520 3
floppy 66984 0
forcedeth 55820 0
ata_generic 13572 0
firewire_ohci 27908 0
firewire_core 45920 1 firewire_ohci
crc_itu_t 6656 1 firewire_core
libata 166064 2 sata_nv,ata_generic
scsi_mod 170488 2 sd_mod,libata
dock 16288 1 libata
ohci_hcd 28292 0
ehci_hcd 40076 0
thermal 26656 1
processor 49388 2 powernow_k8,thermal
fan 10760 1

** PCI devices:
00:00.0 Memory controller [0580]: nVidia Corporation CK804 Memory Controller [10de:005e] (rev a3)
Subsystem: ASUSTeK Computer Inc. Device [1043:815a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>

00:01.0 ISA bridge [0601]: nVidia Corporation CK804 ISA Bridge [10de:0050] (rev f3)
Subsystem: ASUSTeK Computer Inc. Device [1043:815a]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:01.1 SMBus [0c05]: nVidia Corporation CK804 SMBus [10de:0052] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:815a]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 255
Region 0: I/O ports at fc00 [size=32]
Region 4: I/O ports at 4c00 [size=64]
Region 5: I/O ports at 4c40 [size=64]
Capabilities: <access denied>
Kernel driver in use: nForce2_smbus
Kernel modules: i2c-nforce2

00:02.0 USB Controller [0c03]: nVidia Corporation CK804 USB Controller [10de:005a] (rev a2) (prog-if 10)
Subsystem: ASUSTeK Computer Inc. Device [1043:815a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fe02f000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd

00:02.1 USB Controller [0c03]: nVidia Corporation CK804 USB Controller [10de:005b] (rev a3) (prog-if 20)
Subsystem: ASUSTeK Computer Inc. Device [1043:815a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 23
Region 0: Memory at feb00000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd

00:06.0 IDE interface [0101]: nVidia Corporation CK804 IDE [10de:0053] (rev f2) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. Device [1043:815a]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
Region 4: I/O ports at e800 [size=16]
Capabilities: <access denied>
Kernel driver in use: AMD_IDE
Kernel modules: ata_generic, amd74xx, ide-pci-generic

00:07.0 IDE interface [0101]: nVidia Corporation CK804 Serial ATA Controller [10de:0054] (rev f3) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:815a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at 09f0 [size=8]
Region 1: I/O ports at 0bf0 [size=4]
Region 2: I/O ports at 0970 [size=8]
Region 3: I/O ports at 0b70 [size=4]
Region 4: I/O ports at d400 [size=16]
Region 5: Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sata_nv
Kernel modules: ata_generic, sata_nv, ide-pci-generic

00:08.0 IDE interface [0101]: nVidia Corporation CK804 Serial ATA Controller [10de:0055] (rev f3) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:815a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 23
Region 0: I/O ports at 09e0 [size=8]
Region 1: I/O ports at 0be0 [size=4]
Region 2: I/O ports at 0960 [size=8]
Region 3: I/O ports at 0b60 [size=4]
Region 4: I/O ports at c000 [size=16]
Region 5: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sata_nv
Kernel modules: ata_generic, sata_nv, ide-pci-generic

00:09.0 PCI bridge [0604]: nVidia Corporation CK804 PCI Bridge [10de:005c] (rev f2) (prog-if 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=128
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: fdf00000-fdffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-

00:0a.0 Bridge [0680]: nVidia Corporation CK804 Ethernet Controller [10de:0057] (rev f3)
Subsystem: ASUSTeK Computer Inc. Device [1043:812a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 21
Region 0: Memory at fe02a000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at bc00 [size=8]
Capabilities: <access denied>
Kernel driver in use: forcedeth
Kernel modules: forcedeth

00:0b.0 PCI bridge [0604]: nVidia Corporation CK804 PCIE Bridge [10de:005d] (rev f3)
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:0c.0 PCI bridge [0604]: nVidia Corporation CK804 PCIE Bridge [10de:005d] (rev f3)
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:0d.0 PCI bridge [0604]: nVidia Corporation CK804 PCIE Bridge [10de:005d] (rev f3)
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:0e.0 PCI bridge [0604]: nVidia Corporation CK804 PCIE Bridge [10de:005d] (rev a3)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Memory behind bridge: fa000000-fcffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>

00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k8temp
Kernel modules: k8temp

01:01.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. IEEE 1394 Host Controller [1106:3044] (rev c0) (prog-if 10)
Subsystem: ASUSTeK Computer Inc. Device [1043:81fe]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (8000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fdfff000 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at ac00 [size=128]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
Kernel modules: firewire-ohci

01:07.0 Ethernet controller [0200]: Atheros Communications Inc. AR5212/AR5213 Multiprotocol MAC/baseband processor [168c:0013] (rev 01)
Subsystem: Atheros Communications Inc. Device [168c:2051]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168 (2500ns min, 7000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fdfe0000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath_pci
Kernel modules: ath_pci, ath5k

05:00.0 VGA compatible controller [0300]: nVidia Corporation NV44 [GeForce 6200 LE] [10de:0163] (rev a1)
Subsystem: ASUSTeK Computer Inc. Device [1043:8205]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 3
Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at fb000000 (64-bit, non-prefetchable) [size=16M]
Expansion ROM at fcfe0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel modules: nvidiafb



-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.25-2-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.25-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.22 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92f tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo

linux-image-2.6.25-2-amd64 recommends no packages.

Versions of packages linux-image-2.6.25-2-amd64 suggests:
ii grub 0.97-46 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.25 <none> (no description available)

-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.25-2-amd64/preinst/abort-overwrite-2.6.25-2-amd64:
linux-image-2.6.25-2-amd64/prerm/removing-running-kernel-2.6.25-2-amd64: true
linux-image-2.6.25-2-amd64/postinst/old-initrd-link-2.6.25-2-amd64: true
linux-image-2.6.25-2-amd64/postinst/create-kimage-link-2.6.25-2-amd64: true
linux-image-2.6.25-2-amd64/preinst/failed-to-move-modules-2.6.25-2-amd64:
linux-image-2.6.25-2-amd64/preinst/abort-install-2.6.25-2-amd64:
linux-image-2.6.25-2-amd64/postinst/kimage-is-a-directory:
linux-image-2.6.25-2-amd64/postinst/depmod-error-2.6.25-2-amd64: false
linux-image-2.6.25-2-amd64/postinst/bootloader-test-error-2.6.25-2-amd64:
linux-image-2.6.25-2-amd64/postinst/old-system-map-link-2.6.25-2-amd64: true
linux-image-2.6.25-2-amd64/prerm/would-invalidate-boot-loader-2.6.25-2-amd64: true
linux-image-2.6.25-2-amd64/preinst/overwriting-modules-2.6.25-2-amd64: true
linux-image-2.6.25-2-amd64/postinst/depmod-error-initrd-2.6.25-2-amd64: false
linux-image-2.6.25-2-amd64/postinst/old-dir-initrd-link-2.6.25-2-amd64: true
linux-image-2.6.25-2-amd64/preinst/elilo-initrd-2.6.25-2-amd64: true
linux-image-2.6.25-2-amd64/postinst/bootloader-error-2.6.25-2-amd64:
linux-image-2.6.25-2-amd64/preinst/lilo-initrd-2.6.25-2-amd64: true
linux-image-2.6.25-2-amd64/preinst/lilo-has-ramdisk:
linux-image-2.6.25-2-amd64/preinst/initrd-2.6.25-2-amd64:
linux-image-2.6.25-2-amd64/preinst/bootloader-initrd-2.6.25-2-amd64: true
--- Physical volume ---
PV Name /dev/sda5
VG Name big_volume_group
PV Size 325.96 GB / not usable 4.00 MB
Allocatable yes (but full)
PE Size (KByte) 4096
Total PE 83446
Free PE 0
Allocated PE 83446
PV UUID CKmee5-CFKm-C7Px-bhmR-cUCX-fDfd-YqxjfH

--- Physical volume ---
PV Name /dev/dm-1
VG Name crypto-VG
PV Size 325.96 GB / not usable 3.00 MB
Allocatable yes (but full)
PE Size (KByte) 4096
Total PE 83445
Free PE 0
Allocated PE 83445
PV UUID p0mPEm-YJBZ-5Mq8-R18W-sveP-Z89v-hxGtw5

--- Volume group ---
VG Name big_volume_group
System ID
Format lvm2
Metadata Areas 1
Metadata Sequence No 2
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 1
Open LV 1
Max PV 0
Cur PV 1
Act PV 1
VG Size 325.96 GB
PE Size 4.00 MB
Total PE 83446
Alloc PE / Size 83446 / 325.96 GB
Free PE / Size 0 / 0
VG UUID mW6sR2-otxS-TY8A-NPwo-NRrP-X0s1-HqhQe2

--- Volume group ---
VG Name crypto-VG
System ID
Format lvm2
Metadata Areas 1
Metadata Sequence No 4
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 3
Open LV 3
Max PV 0
Cur PV 1
Act PV 1
VG Size 325.96 GB
PE Size 4.00 MB
Total PE 83445
Alloc PE / Size 83445 / 325.96 GB
Free PE / Size 0 / 0
VG UUID vKKTGP-o8Ug-x96m-Je2F-m0rM-eUuo-zHv3Cj

--- Logical volume ---
LV Name /dev/big_volume_group/big_log_vol
VG Name big_volume_group
LV UUID hOAloW-typH-J07F-XfRl-vkp8-2rFI-nZ38zH
LV Write Access read/write
LV Status available
# open 1
LV Size 325.96 GB
Current LE 83446
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 254:0

--- Logical volume ---
LV Name /dev/crypto-VG/swap_lv
VG Name crypto-VG
LV UUID fstjzx-EJUe-PEI3-PHjs-923q-rzi4-qGGhda
LV Write Access read/write
LV Status available
# open 2
LV Size 2.00 GB
Current LE 512
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 254:2

--- Logical volume ---
LV Name /dev/crypto-VG/root_lv
VG Name crypto-VG
LV UUID Q3IKQW-sK9E-l1ck-Vsyf-kr9n-S8QQ-Vz1ux6
LV Write Access read/write
LV Status available
# open 1
LV Size 20.00 GB
Current LE 5120
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 254:3

--- Logical volume ---
LV Name /dev/crypto-VG/scratch_lv
VG Name crypto-VG
LV UUID uWd0AI-3VnE-vt48-j6M0-9e3B-2Wxq-vUiCBg
LV Write Access read/write
LV Status available
# open 1
LV Size 303.96 GB
Current LE 77813
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 254:4
 

Thread Tools




All times are GMT. The time now is 07:12 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org