Linux Archive

Linux Archive (http://www.linux-archive.org/)
-   Debian Kernel (http://www.linux-archive.org/debian-kernel/)
-   -   Bug#488265: linux-image-2.6-amd64-etchnhalf: Problem using bnx2 module (http://www.linux-archive.org/debian-kernel/114618-bug-488265-linux-image-2-6-amd64-etchnhalf-problem-using-bnx2-module.html)

Evaggelos Souglakos 06-27-2008 01:03 PM

Bug#488265: linux-image-2.6-amd64-etchnhalf: Problem using bnx2 module
 
Package: linux-image-2.6-amd64-etchnhalf
Version: 2.6.24+13~etchnhalf.1
Severity: important


bnx2 modules is useless on this kernel package

Loading Linux version 2.6.24-etchnhalf.1-amd64 (Debian 2.6.24-6~etchnhalf.3) (dannf@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian
4.1.1-21)) #1 SMP

It is an ibm x3650 server

bnx2: Can't load firmware file bnx2-06-4.0.5.fw
ACPI: PCI interrupt for device 0000:04:00.0 disabled
bnx2: probe of 0000:04:00.0 failed with error -2


Thanks,


-- System Information:
Debian Release: 4.0
APT prefers stable
APT policy: (500, 'stable')
Architecture: amd64 (x86_64)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.18-6-amd64
Locale: LANG=C, LC_CTYPE=el_GR (charmap=ISO-8859-7)

Versions of packages linux-image-2.6-amd64-etchnhalf depends on:
ii linux-image-2.6.24- 2.6.24-6~etchnhalf.3 Linux 2.6.24 image on AMD64

linux-image-2.6-amd64-etchnhalf recommends no packages.

-- no debconf information



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

dann frazier 06-27-2008 03:27 PM

Bug#488265: linux-image-2.6-amd64-etchnhalf: Problem using bnx2 module
 
On Fri, Jun 27, 2008 at 04:03:36PM +0300, Evaggelos Souglakos wrote:
> Package: linux-image-2.6-amd64-etchnhalf
> Version: 2.6.24+13~etchnhalf.1
> Severity: important
>
>
> bnx2 modules is useless on this kernel package
>
> Loading Linux version 2.6.24-etchnhalf.1-amd64 (Debian 2.6.24-6~etchnhalf.3) (dannf@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian
> 4.1.1-21)) #1 SMP
>
> It is an ibm x3650 server
>
> bnx2: Can't load firmware file bnx2-06-4.0.5.fw
> ACPI: PCI interrupt for device 0000:04:00.0 disabled
> bnx2: probe of 0000:04:00.0 failed with error -2

You need to install the firmware-bnx2 package from non-free. See the
release notes draft here:
http://people.debian.org/~dannf/tmp/etchnhalf/

--
dann frazier




--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

Evaggelos Souglakos 06-27-2008 06:39 PM

Bug#488265: linux-image-2.6-amd64-etchnhalf: Problem using bnx2 module
 
Hello,
I have already installed the firmware-bnx2 package

dpkg -l |grep bnx
ii firmware-bnx2 0.11~bpo40+1 Binary firmware
for Broadcom NetXtremeII

dpkg -l | grep linux-image-2.6-amd64-etchnhalf
ii linux-image-2.6-amd64-etchnhalf 2.6.24+13~etchnhalf.1 Linux
2.6-etchnhalf image on AM

but on kernel boot i can still see:

bnx2: Can't load firmware file bnx2-06-4.0.5.fw

Is it supposed to get these files from /lib/firmware?

As you can see there are at this dir.

ls -l /lib/firmware/
total 216
-rw-r--r-- 1 root root 106116 Jun 5 11:29 bnx2-06-4.0.5.fw
-rw-r--r-- 1 root root 102844 Jun 5 11:29 bnx2-09-4.0.5.fw

I would appreciate any further help

Thank you,

On Friday 27 June 2008 18:27:17 dann frazier wrote:
> On Fri, Jun 27, 2008 at 04:03:36PM +0300, Evaggelos Souglakos wrote:
> > Package: linux-image-2.6-amd64-etchnhalf
> > Version: 2.6.24+13~etchnhalf.1
> > Severity: important
> >
> >
> > bnx2 modules is useless on this kernel package
> >
> > Loading Linux version 2.6.24-etchnhalf.1-amd64 (Debian
> > 2.6.24-6~etchnhalf.3) (dannf@debian.org) (gcc version 4.1.2 20061115
> > (prerelease) (Debian 4.1.1-21)) #1 SMP
> >
> > It is an ibm x3650 server
> >
> > bnx2: Can't load firmware file bnx2-06-4.0.5.fw
> > ACPI: PCI interrupt for device 0000:04:00.0 disabled
> > bnx2: probe of 0000:04:00.0 failed with error -2
>
> You need to install the firmware-bnx2 package from non-free. See the
> release notes draft here:
> http://people.debian.org/~dannf/tmp/etchnhalf/



--
================================================== ===========================
Evaggelos Souglakos OTEnet Internet Service Provider
Unix Systems Engineer Systems & Services Section
e-mail: evansg@otenet.gr Telephone No. +30-210-6151663
================================================== ===========================

The most successful people are those who are good at plan B





--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

dann frazier 06-27-2008 07:46 PM

Bug#488265: linux-image-2.6-amd64-etchnhalf: Problem using bnx2 module
 
On Fri, Jun 27, 2008 at 09:39:25PM +0300, Evaggelos Souglakos wrote:
> Hello,
> I have already installed the firmware-bnx2 package
>
> dpkg -l |grep bnx
> ii firmware-bnx2 0.11~bpo40+1 Binary firmware
> for Broadcom NetXtremeII

You need the one from proposed-updates. The one in sid only works with
an initramfs-tools package version that knows how to copy firmware
files over. The one in proposed-updates provides its own hook to work
with etch's initramfs-tools.

> dpkg -l | grep linux-image-2.6-amd64-etchnhalf
> ii linux-image-2.6-amd64-etchnhalf 2.6.24+13~etchnhalf.1 Linux
> 2.6-etchnhalf image on AM
>
> but on kernel boot i can still see:
>
> bnx2: Can't load firmware file bnx2-06-4.0.5.fw
>
> Is it supposed to get these files from /lib/firmware?
>
> As you can see there are at this dir.
>
> ls -l /lib/firmware/
> total 216
> -rw-r--r-- 1 root root 106116 Jun 5 11:29 bnx2-06-4.0.5.fw
> -rw-r--r-- 1 root root 102844 Jun 5 11:29 bnx2-09-4.0.5.fw
>
> I would appreciate any further help
>
> Thank you,
>
> On Friday 27 June 2008 18:27:17 dann frazier wrote:
> > On Fri, Jun 27, 2008 at 04:03:36PM +0300, Evaggelos Souglakos wrote:
> > > Package: linux-image-2.6-amd64-etchnhalf
> > > Version: 2.6.24+13~etchnhalf.1
> > > Severity: important
> > >
> > >
> > > bnx2 modules is useless on this kernel package
> > >
> > > Loading Linux version 2.6.24-etchnhalf.1-amd64 (Debian
> > > 2.6.24-6~etchnhalf.3) (dannf@debian.org) (gcc version 4.1.2 20061115
> > > (prerelease) (Debian 4.1.1-21)) #1 SMP
> > >
> > > It is an ibm x3650 server
> > >
> > > bnx2: Can't load firmware file bnx2-06-4.0.5.fw
> > > ACPI: PCI interrupt for device 0000:04:00.0 disabled
> > > bnx2: probe of 0000:04:00.0 failed with error -2
> >
> > You need to install the firmware-bnx2 package from non-free. See the
> > release notes draft here:
> > http://people.debian.org/~dannf/tmp/etchnhalf/
>
>
>

--
dann frazier




--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org


All times are GMT. The time now is 08:37 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.