FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian Kernel

 
 
LinkBack Thread Tools
 
Old 06-24-2008, 10:39 AM
Lea Wiemann
 
Default Bug#487824: linux-image-2.6.25: regression: ACPI battery not supported under VMware Fusion

Package: linux-image-2.6.25-2-686
Version: 2.6.25-5
Severity: normal
File: linux-image-2.6.25


I activated "pass power supply to guest" under VMware Fusion 1.1.3,
but as of linux-image-2.6.25 I only get the following output:

$ acpi
No support for device type: battery

However, the battery does seem to be recognized -- relevant dmesg
lines below. Since this is a regression that happened since kernel
2.6.25 (it worked fine in 2.6.24), I'm filing this bug against the
linux-image package and not acpi -- hope that's ok.

$ dmesg | grep -i battery
[ 35.450030] ACPI: Battery Slot [BAT1] (battery present)

$ dmesg|grep -i 'acpi|battery|power'
[ 0.000000] BIOS-e820: 000000003fef0000 - 000000003feff000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003feff000 - 000000003ff00000 (ACPI NVS)
[ 0.000000] ACPI: RSDP 000F6C60, 0014 (r0 PTLTD )
[ 0.000000] ACPI: RSDT 3FEFAB5A, 0030 (r1 PTLTD RSDT 6040000 LTP 0)
[ 0.000000] ACPI: FACP 3FEFEF06, 0074 (r1 INTEL 440BX 6040000 PTL F4240)
[ 0.000000] ACPI: DSDT 3FEFAB8A, 437C (r1 PTLTD Custom 6040000 MSFT 100000D)
[ 0.000000] ACPI: FACS 3FEFFFC0, 0040
[ 0.000000] ACPI: APIC 3FEFEF7A, 005E (r1 PTLTD APIC 6040000 LTP 0)
[ 0.000000] ACPI: BOOT 3FEFEFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.100068] ACPI: Core revision 20070126
[ 0.252862] ACPI: bus type pci registered
[ 0.268062] ACPI: EC: Look up EC in DSDT
[ 0.292202] ACPI: Interpreter enabled
[ 0.292265] ACPI: (supports S0 S1 S4 S5)
[ 0.293776] ACPI: Using IOAPIC for interrupt routing
[ 0.318509] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.328085] pci 0000:00:07.3: quirk: region 1000-103f claimed by PIIX4 ACPI
[ 0.349876] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.356087] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 14 15)
[ 0.357813] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 14 15)
[ 0.365790] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 14 15)
[ 0.369772] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 14 15)
[ 0.380702] pnp: PnP ACPI init
[ 0.380765] ACPI: bus type pnp registered
[ 0.422116] pnp: PnP ACPI: found 12 devices
[ 0.422179] ACPI: ACPI bus type pnp unregistered
[ 0.422241] PnPBIOS: Disabled by ACPI PNP
[ 0.428029] PCI: Using ACPI for IRQ routing
[ 0.545702] ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 2.389230] ACPI: ACPI0007:00 is registered as cooling_device0
[ 2.389284] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 1.698490] ACPI: ACPI0007:01 is registered as cooling_device1
[ 1.698543] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 3.101851] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 3.431042] ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 4.125108] ACPI: PCI Interrupt 0000:00:07.2[D] -> GSI 19 (level, low) -> IRQ 19
[ 4.456663] ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 4.581349] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 35.239401] input: Power Button (FF) as /class/input/input1
[ 35.289564] ACPI: Power Button (FF) [PWRF]
[ 35.405458] ACPI: AC Adapter [ACAD] (on-line)
[ 35.450030] ACPI: Battery Slot [BAT1] (battery present)
[ 36.567457] parport_pc 00:08: reported by Plug and Play ACPI
[ 36.923587] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 53.256537] ACPI: WMI: Mapper loaded
[ 57.021895] ACPI: PCI interrupt for device 0000:02:00.0 disabled
[ 57.048743] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 18 (level, low) -> IRQ 18


-- Package-specific info:
** Version:
Linux version 2.6.25-2-686 (Debian 2.6.25-5) (waldi@debian.org) (gcc version 4.1.3 20080420 (prerelease) (Debian 4.1.2-22)) #1 SMP Thu Jun 12 16:26:30 UTC 2008

** Command line:
root=/dev/sda1 ro

** Not tainted

** Kernel log:
[116085.301857] sd 2:0:0:0: [sdb] Write Protect is off
[116085.301911] sd 2:0:0:0: [sdb] Mode Sense: 00 38 00 00
[116085.301951] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[116085.321215] sd 2:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[116085.328615] sd 2:0:0:0: [sdb] Write Protect is off
[116085.328639] sd 2:0:0:0: [sdb] Mode Sense: 00 38 00 00
[116085.328642] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[116085.328713] sdb: sdb1
[116085.345005] sd 2:0:0:0: [sdb] Attached SCSI disk
[121820.585479] kjournald starting. Commit interval 5 seconds
[121820.606465] EXT3 FS on sdb1, internal journal
[121820.606465] EXT3-fs: mounted filesystem with ordered data mode.
[144251.198452] usb 2-1: USB disconnect, address 2
[150193.283460] journal_bmap: journal block not found at offset 551 on sdb1
[150193.284185] Aborting journal on device sdb1.
[150193.284523] Buffer I/O error on device sdb1, logical block 1545
[150193.284564] lost page write due to I/O error on sdb1
[144251.221344] journal commit I/O error
[161771.239836] eth0: no IPv6 routers present
[157584.475469] EXT3-fs error (device sdb1): ext3_find_entry: reading directory #2 offset 0
[157584.476250] Remounting filesystem read-only
[157584.481366] Buffer I/O error on device sdb1, logical block 0
[157584.481502] lost page write due to I/O error on sdb1
[157584.493466] EXT3-fs error (device sdb1): ext3_find_entry: reading directory #2 offset 0
[157584.493466] EXT3-fs error (device sdb1): ext3_find_entry: reading directory #2 offset 0
[157584.519201] EXT3-fs error (device sdb1): ext3_find_entry: reading directory #2 offset 0
[157584.526486] EXT3-fs error (device sdb1): ext3_find_entry: reading directory #2 offset 0
[160004.430650] ------------[ cut here ]------------
[160004.431232] WARNING: at fs/buffer.c:1183 mark_buffer_dirty+0x20/0x6a()
[160004.431396] Modules linked in: usb_storage vmxnet vmsync vmmemctl ppdev lp video output wmi sbs sbshc ipv6 vmhgfs fuse dm_snapshot dm_mirror dm_mod firewire_sbp2 firewire_core crc_itu_t loop snd_ens1371 gameport snd_seq_dummy snd_seq_oss snd_seq_midi snd_seq_midi_event snd_seq snd_rawmidi snd_seq_device snd_ac97_codec ac97_bus snd_pcm_oss snd_mixer_oss parport_pc parport snd_pcm snd_timer rtc snd soundcore snd_page_alloc psmouse serio_raw i2c_piix4 i2c_core container battery ac button intel_agp shpchp agpgart pci_hotplug evdev ext3 jbd mbcache ide_cd_mod cdrom sd_mod ata_generic libata dock floppy ehci_hcd mii mptspi mptscsih mptbase scsi_transport_spi scsi_mod uhci_hcd piix ide_pci_generic usbcore ide_core thermal processor fan [last unloaded: pcspkr]
[160004.457847] Pid: 31169, comm: umount Not tainted 2.6.25-2-686 #1
[160004.459563] [<c0123f9f>] warn_on_slowpath+0x40/0x4f
[160004.460661] [<c0106970>] __switch_to+0xa3/0x12f
[160004.460712] [<c012001a>] hrtick_set+0x7a/0xd8
[160004.460723] [<c02b4293>] schedule+0x5c8/0x5e9
[160004.460969] [<c0190b7e>] mark_buffer_dirty+0x20/0x6a
[160004.460988] [<f8923bd8>] journal_update_superblock+0x59/0x97 [jbd]
[160004.461556] [<f89246ff>] journal_destroy+0x11e/0x163 [jbd]
[160004.461571] [<c01339f4>] autoremove_wake_function+0x0/0x2d
[160004.461656] [<f898be5a>] ext3_put_super+0x1f/0x169 [ext3]
[160004.461922] [<c017710c>] generic_shutdown_super+0x4f/0xc8
[160004.462067] [<c0177191>] kill_block_super+0xc/0x1b
[160004.462074] [<c0177236>] deactivate_super+0x51/0x64
[160004.462082] [<c0187a02>] sys_umount+0x297/0x2dd
[160004.462093] [<c016b7d7>] free_pages_and_swap_cache+0x6a/0x7e
[160004.462105] [<c0178770>] sys_stat64+0xf/0x23
[160004.462116] [<c0118b50>] do_page_fault+0x268/0x584
[160004.462130] [<c0187a53>] sys_oldumount+0xb/0xe
[160004.462139] [<c01077e8>] sysenter_past_esp+0x6d/0xa5
[160004.462218] =======================
[160004.462291] ---[ end trace ac1d3568c4fe6c9b ]---
[160004.462576] Buffer I/O error on device sdb1, logical block 1545
[160004.462615] lost page write due to I/O error on sdb1
[160024.147821] usb 2-1: new high speed USB device using ehci_hcd and address 3
[160024.311728] usb 2-1: configuration #1 chosen from 1 choice
[160024.401471] scsi3 : SCSI emulation for USB Mass Storage devices
[166138.213188] usb-storage: device found at 3
[166138.213625] usb-storage: waiting for device to settle before scanning
[166138.228052] usb 2-1: New USB device found, idVendor=059f, idProduct=0951
[166138.228244] usb 2-1: New USB device strings: Mfr=10, Product=11, SerialNumber=5
[166138.228307] usb 2-1: Product: LaCie Hard Drive USB
[166138.228333] usb 2-1: Manufacturer: LaCie
[166138.228350] usb 2-1: SerialNumber: 9391DFFFFFFF
[166143.251464] usb-storage: device scan complete
[160029.459175] scsi 3:0:0:0: Direct-Access ST350083 0AS PQ: 0 ANSI: 2 CCS
[160029.475354] sd 3:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[160029.482269] sd 3:0:0:0: [sdb] Write Protect is off
[160029.482360] sd 3:0:0:0: [sdb] Mode Sense: 00 38 00 00
[160029.482462] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[160029.497382] sd 3:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[160029.503666] sd 3:0:0:0: [sdb] Write Protect is off
[160029.503666] sd 3:0:0:0: [sdb] Mode Sense: 00 38 00 00
[160029.503666] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[160029.503666] sdb: sdb1
[160029.514924] sd 3:0:0:0: [sdb] Attached SCSI disk
[160033.564647] kjournald starting. Commit interval 5 seconds
[166147.473523] EXT3 FS on sdb1, internal journal
[166147.473523] EXT3-fs: recovery complete.
[166147.478514] EXT3-fs: mounted filesystem with ordered data mode.
[160330.133467] mptscsih: ioc0: attempting task abort! (sc=ee70bbc0)
[160330.133467] sd 0:0:0:0: [sda] CDB: Write(10): 2a 00 01 d6 b6 9f 00 00 18 00
[160330.133467] mptscsih: ioc0: task abort: SUCCESS (sc=ee70bbc0)
[160330.137785] mptscsih: ioc0: attempting task abort! (sc=ee70b7c0)
[160330.137798] sd 0:0:0:0: [sda] CDB: Write(10): 2a 00 01 d6 e0 7f 00 01 40 00
[160330.137821] mptscsih: ioc0: task abort: SUCCESS (sc=ee70b7c0)
[160330.137983] mptscsih: ioc0: attempting task abort! (sc=ee70b6c0)
[160330.137990] sd 0:0:0:0: [sda] CDB: Write(10): 2a 00 01 d6 e1 bf 00 01 40 00
[160330.138010] mptscsih: ioc0: task abort: SUCCESS (sc=ee70b6c0)
[160330.138137] mptscsih: ioc0: attempting task abort! (sc=ee70bec0)
[160330.138143] sd 0:0:0:0: [sda] CDB: Write(10): 2a 00 01 d6 e2 ff 00 01 20 00
[160330.138164] mptscsih: ioc0: task abort: SUCCESS (sc=ee70bec0)
[160330.138291] mptscsih: ioc0: attempting task abort! (sc=ee733b80)
[160330.138297] sd 0:0:0:0: [sda] CDB: Write(10): 2a 00 01 d7 14 bf 00 01 40 00
[160330.138317] mptscsih: ioc0: task abort: SUCCESS (sc=ee733b80)
[160330.138440] mptscsih: ioc0: attempting task abort! (sc=ee733c80)
[160330.138446] sd 0:0:0:0: [sda] CDB: Write(10): 2a 00 01 d7 15 ff 00 00 30 00
[160330.138466] mptscsih: ioc0: task abort: SUCCESS (sc=ee733c80)
[161200.437396] usb 2-1: USB disconnect, address 3
[173470.905494] Process accounting paused
[190375.823974] Process accounting resumed

** Loaded modules:
Module Size Used by
usb_storage 76896 0
vmxnet 16128 0
vmsync 5536 0
vmmemctl 8412 0
ppdev 8676 0
lp 11012 0
video 19728 0
output 3712 1 video
wmi 7880 0
sbs 8544 0
sbshc 6784 1 sbs
ipv6 241956 20
vmhgfs 38240 1
fuse 44348 1
dm_snapshot 17444 0
dm_mirror 25316 0
dm_mod 55656 2 dm_snapshot,dm_mirror
firewire_sbp2 15956 0
firewire_core 35680 1 firewire_sbp2
crc_itu_t 2176 1 firewire_core
loop 16708 0
snd_ens1371 24224 0
gameport 14124 1 snd_ens1371
snd_seq_dummy 3780 0
snd_seq_oss 28544 0
snd_seq_midi 8064 0
snd_seq_midi_event 6976 2 snd_seq_oss,snd_seq_midi
snd_seq 45872 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_mid i_event
snd_rawmidi 22528 2 snd_ens1371,snd_seq_midi
snd_seq_device 7564 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq,snd _rawmidi
snd_ac97_codec 91300 1 snd_ens1371
ac97_bus 1952 1 snd_ac97_codec
snd_pcm_oss 37824 0
snd_mixer_oss 14880 1 snd_pcm_oss
parport_pc 25860 1
parport 33868 3 ppdev,lp,parport_pc
snd_pcm 68228 3 snd_ens1371,snd_ac97_codec,snd_pcm_oss
snd_timer 21320 2 snd_seq,snd_pcm
rtc 14272 0
snd 48772 10 snd_ens1371,snd_seq_oss,snd_seq,snd_rawmidi,snd_se q_device,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss, snd_pcm,snd_timer
soundcore 7488 1 snd
snd_page_alloc 9992 1 snd_pcm
psmouse 35920 0
serio_raw 6532 0
i2c_piix4 8652 0
i2c_core 22548 1 i2c_piix4
container 4736 0
battery 8448 0
ac 4448 0
button 8240 0
intel_agp 25084 1
shpchp 29716 0
agpgart 31720 1 intel_agp
pci_hotplug 26980 1 shpchp
evdev 11328 2
ext3 120360 1
jbd 43444 1 ext3
mbcache 8260 1 ext3
ide_cd_mod 32864 0
cdrom 31872 1 ide_cd_mod
sd_mod 26072 2
ata_generic 8004 0
libata 142288 1 ata_generic
dock 10448 1 libata
floppy 53284 0
ehci_hcd 32620 0
mii 5248 0
mptspi 17544 1
mptscsih 25056 1 mptspi
mptbase 55044 2 mptspi,mptscsih
scsi_transport_spi 22368 1 mptspi
scsi_mod 138508 7 usb_storage,firewire_sbp2,sd_mod,libata,mptspi,mpt scsih,scsi_transport_spi
uhci_hcd 22352 0
piix 7176 0 [permanent]
ide_pci_generic 4228 0 [permanent]
usbcore 130032 4 usb_storage,ehci_hcd,uhci_hcd
ide_core 100312 3 ide_cd_mod,piix,ide_pci_generic
thermal 19100 0
processor 39660 1 thermal
fan 5636 0

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge [8086:7190] (rev 01)
Subsystem: VMware Inc Device [15ad:1976]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp

00:01.0 PCI bridge [0604]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge [8086:7191] (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B+
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Kernel modules: shpchp

00:07.0 ISA bridge [0601]: Intel Corporation 82371AB/EB/MB PIIX4 ISA [8086:7110] (rev 08)
Subsystem: VMware Inc Device [15ad:1976]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:07.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE [8086:7111] (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: VMware Inc Device [15ad:1976]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
Region 4: I/O ports at 1050 [size=16]
Kernel driver in use: PIIX_IDE
Kernel modules: piix

00:07.2 USB Controller [0c03]: Intel Corporation 82371AB/EB/MB PIIX4 USB [8086:7112]
Subsystem: VMware Inc Device [15ad:1976]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin D routed to IRQ 19
Region 4: I/O ports at 1060 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:07.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 08)
Subsystem: VMware Inc Device [15ad:1976]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin ? routed to IRQ 9
Kernel modules: i2c-piix4

00:0f.0 VGA compatible controller [0300]: VMware Inc Abstract SVGA II Adapter [15ad:0405]
Subsystem: VMware Inc Abstract SVGA II Adapter [15ad:0405]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Region 0: I/O ports at 1400 [size=16]
Region 1: Memory at f0000000 (32-bit, non-prefetchable) [size=128M]
Region 2: Memory at e8000000 (32-bit, non-prefetchable) [size=8M]
[virtual] Expansion ROM at 50100000 [disabled] [size=32K]

00:10.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI [1000:0030] (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1500ns min, 63750ns max)
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at 1080 [size=128]
Region 1: Memory at e8800000 (32-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at 50108000 [disabled] [size=16K]
Kernel driver in use: mptspi
Kernel modules: mptspi

00:11.0 PCI bridge [0604]: VMware Inc Device [15ad:0790] (rev 02) (prog-if 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Region 0: Memory at e8801000 (64-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=02, subordinate=02, sec-latency=68
I/O behind bridge: 00002000-00002fff
Memory behind bridge: e8900000-e89fffff
Prefetchable memory behind bridge: 0000000050000000-00000000500fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>

02:00.0 Ethernet controller [0200]: Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE] [1022:2000] (rev 10)
Subsystem: Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE] [1022:2000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1500ns min, 63750ns max)
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 2000 [size=128]
[virtual] Expansion ROM at 50000000 [disabled] [size=64K]
Kernel driver in use: vmxnet
Kernel modules: pcnet32, vmxnet

02:01.0 Multimedia audio controller [0401]: Ensoniq ES1371 [AudioPCI-97] [1274:1371] (rev 02)
Subsystem: Ensoniq ES1371 [AudioPCI-97] [1274:1371]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=?? >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1500ns min, 63750ns max)
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at 2400 [size=64]
Kernel driver in use: ENS1371
Kernel modules: snd-ens1371

02:02.0 USB Controller [0c03]: VMware Inc Abstract USB2 EHCI Controller [15ad:0770] (prog-if 20)
Subsystem: VMware Inc Abstract USB2 EHCI Controller [15ad:0770]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1500ns min, 63750ns max)
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e8900000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd

02:03.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI [1000:0030] (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1500ns min, 63750ns max)
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at 2080 [size=128]
Region 1: Memory at e8901000 (32-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at 50010000 [disabled] [size=16K]
Kernel driver in use: mptspi
Kernel modules: mptspi

02:05.0 System peripheral [0880]: VMware Inc Virtual Machine Communication Interface [15ad:0740] (rev 10)
Subsystem: VMware Inc Virtual Machine Communication Interface [15ad:0740]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at 2440 [size=32]



-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (650, 'testing'), (600, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 2.6.25-2-686 (SMP w/2 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.25-2-686 depends on:
ii debconf [debconf-2.0] 1.5.22 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92b tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo

Versions of packages linux-image-2.6.25-2-686 recommends:
ii libc6-i686 2.7-10 GNU C Library: Shared libraries [i

-- debconf information:
linux-image-2.6.25-2-686/preinst/abort-install-2.6.25-2-686:
linux-image-2.6.25-2-686/postinst/bootloader-test-error-2.6.25-2-686:
linux-image-2.6.25-2-686/prerm/removing-running-kernel-2.6.25-2-686: true
linux-image-2.6.25-2-686/postinst/old-initrd-link-2.6.25-2-686: true
linux-image-2.6.25-2-686/preinst/initrd-2.6.25-2-686:
linux-image-2.6.25-2-686/postinst/kimage-is-a-directory:
linux-image-2.6.25-2-686/postinst/depmod-error-2.6.25-2-686: false
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.25-2-686/preinst/overwriting-modules-2.6.25-2-686: true
linux-image-2.6.25-2-686/prerm/would-invalidate-boot-loader-2.6.25-2-686: true
linux-image-2.6.25-2-686/preinst/elilo-initrd-2.6.25-2-686: true
linux-image-2.6.25-2-686/postinst/depmod-error-initrd-2.6.25-2-686: false
linux-image-2.6.25-2-686/preinst/bootloader-initrd-2.6.25-2-686: true
linux-image-2.6.25-2-686/preinst/lilo-has-ramdisk:
linux-image-2.6.25-2-686/postinst/bootloader-error-2.6.25-2-686:
linux-image-2.6.25-2-686/preinst/lilo-initrd-2.6.25-2-686: true
linux-image-2.6.25-2-686/postinst/old-system-map-link-2.6.25-2-686: true
linux-image-2.6.25-2-686/postinst/create-kimage-link-2.6.25-2-686: true
linux-image-2.6.25-2-686/postinst/old-dir-initrd-link-2.6.25-2-686: true
linux-image-2.6.25-2-686/preinst/abort-overwrite-2.6.25-2-686:
linux-image-2.6.25-2-686/preinst/failed-to-move-modules-2.6.25-2-686:



--
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
 

Thread Tools




All times are GMT. The time now is 05:32 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org