FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > Debian > Debian ISP

 
 
LinkBack Thread Tools
 
Old 03-24-2010, 02:16 AM
"Felipe Augusto van de Wiel (faw)"
 
Default Monitoring server sensors and triggering actions

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi,

At work, after some power related problems,
including long period without power, no-breaks at
their full capacity and air-conditioning not being
covered by in-house power generators, we decided
to configure the servers to automatically shutdown
under critical conditions.

After a few days and some research we are
kind of puzzled. We are using munin and Nagios, so
we know both tools can trigger alerts about
temperature and/or other sensors (like voltages).

Our problem is not related to monitoring
the no-breaks, they are basically to keep short
power outages, the local power generator should
kick-in in less than a minute.

How do you shutdown a server if CPU hits
critical temperatures? Do you use a program? Do
you hack your own shell script?

We couldn't find a tool or service that
would look to sensors and get some parameters,
once limits are crossed a mail to sysadmins are
sent and servers are shutdown for precaution.

One of the things we are avoiding are
network monitoring tools, switches can be off,
so we are looking into something inside each
host, but we could live with a network solution
(if that's the only - or best - option).

Any ideas, hints or comments?

Kind regards,
- --
Felipe Augusto van de Wiel (faw)
Debian. Freedom to code. Code to freedom!
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/

iEYEARECAAYFAkuphAwACgkQCjAO0JDlykZ+TQCfce3QTH97Z6 c68o3FPWteqold
P0cAn3lGMGsMW0VuBlm0lwU3y9cSrNj5
=ckI8
-----END PGP SIGNATURE-----


--
To UNSUBSCRIBE, email to debian-isp-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 4BA9840E.70004@funlabs.org">http://lists.debian.org/4BA9840E.70004@funlabs.org
 
Old 03-24-2010, 03:49 AM
Eden Caldas
 
Default Monitoring server sensors and triggering actions

Use lm-sensors. It runs localy and you can create a script that runs as a cron job that checks the output of lm-sensors and shutdown if you get high temps and stuff.

http://packages.debian.org/lenny/lm-sensors



2010/3/24 Felipe Augusto van de Wiel (faw) <faw@funlabs.org>


-----BEGIN PGP SIGNED MESSAGE-----

Hash: SHA1



Hi,



* * * *At work, after some power related problems,

including long period without power, no-breaks at

their full capacity and air-conditioning not being

covered by in-house power generators, we decided

to configure the servers to automatically shutdown

under critical conditions.



* * * *After a few days and some research we are

kind of puzzled. *We are using munin and Nagios, so

we know both tools can trigger alerts about

temperature and/or other sensors (like voltages).



* * * *Our problem is not related to monitoring

the no-breaks, they are basically to keep short

power outages, the local power generator should

kick-in in less than a minute.



* * * *How do you shutdown a server if CPU hits

critical temperatures? *Do you use a program? *Do

you hack your own shell script?



* * * *We couldn't find a tool or service that

would look to sensors and get some parameters,

once limits are crossed a mail to sysadmins are

sent and servers are shutdown for precaution.



* * * *One of the things we are avoiding are

network monitoring tools, switches can be off,

so we are looking into something inside each

host, but we could live with a network solution

(if that's the only - or best - option).



* * * *Any ideas, hints or comments?



Kind regards,

- --

Felipe Augusto van de Wiel (faw)

Debian. Freedom to code. Code to freedom!

-----BEGIN PGP SIGNATURE-----

Version: GnuPG v1.4.10 (GNU/Linux)

Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/



iEYEARECAAYFAkuphAwACgkQCjAO0JDlykZ+TQCfce3QTH97Z6 c68o3FPWteqold

P0cAn3lGMGsMW0VuBlm0lwU3y9cSrNj5

=ckI8

-----END PGP SIGNATURE-----





--

To UNSUBSCRIBE, email to debian-isp-REQUEST@lists.debian.org

with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

Archive: http://lists.debian.org/4BA9840E.70004@funlabs.org





--
Eden Caldas
Consultor de TI
eden@linuxfacil.srv.br
(81) 9653 7220
LINUX FÁCIL – Consultoria e Serviços em TI
 
Old 03-24-2010, 08:13 AM
Gavin Westwood
 
Default Monitoring server sensors and triggering actions

On 2010/3/24
Felipe Augusto van de Wiel wrote:


How do you shutdown a server if CPU hits

critical temperatures? Do you use a program? Do

you hack your own shell script?


On 24/03/10 04:49, Eden Caldas replied:


Use lm-sensors.
It runs localy and you

can create a script that runs as a cron job that checks the output of

lm-sensors and shutdown if you get high temps and stuff.




Further to this, you might be interested in the following links:



http://lists.lm-sensors.org/pipermail/lm-sensors/2009-May/025917.html



http://cahbojonegoro.wordpress.com/2008/12/15/cpu-temperature-monitor-script/



And, while not directly answering your question, this is a neat way to
monitor the temps in the rack:



http://www.hoppie.nl/tempsens/



Hope that helps.



Gavin



--



Gavin Westwood

Solutium



http://www.solutium.net - Going the extra mile to provide a fast,
helpful, reliable Web Hosting service.
 
Old 03-24-2010, 09:24 AM
Adam McGreggor
 
Default Monitoring server sensors and triggering actions

On Wed, Mar 24, 2010 at 12:16:30AM -0300, Felipe Augusto van de Wiel (faw) wrote:
> How do you shutdown a server if CPU hits
> critical temperatures? Do you use a program? Do
> you hack your own shell script?
>
> We couldn't find a tool or service that
> would look to sensors and get some parameters,
> once limits are crossed a mail to sysadmins are
> sent and servers are shutdown for precaution.

In addition to lm-sensors, mentioned by others, monit
(<http://mmonit.com/monit/>) may be a useful
package to try.

I'm quite impressed with it, so far.

--
``Every problem in the world can be fixed with either flowers,
or duct tape, or both.' (David Millington)


--
To UNSUBSCRIBE, email to debian-isp-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20100324102459.GX2886@amyl.org.uk">http://lists.debian.org/20100324102459.GX2886@amyl.org.uk
 
Old 03-24-2010, 11:51 AM
Robert Joosten
 
Default Monitoring server sensors and triggering actions

Hi,

> Do you use a program? Do you hack your own shell script?

Make your servers listen to snmptraps. I installed net-snmp
have the following in snmptrapd:

traphandle .1.3.6.1.4.1.blah.bah.blah /sbin/init 0

Obviously, pay attention to security matters.

Maybe your UPS generate traps, or let nagios send out traps.

Alternatively, have something in inetd.conf and have this tcpwrapped or
firewalled. :-)

Hth.

Robert


--
To UNSUBSCRIBE, email to debian-isp-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 20100324125138.GA21161@ismet.erje.net">http://lists.debian.org/20100324125138.GA21161@ismet.erje.net
 
Old 03-25-2010, 02:04 AM
"Felipe Augusto van de Wiel (faw)"
 
Default Monitoring server sensors and triggering actions

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On 24-03-2010 01:49, Eden Caldas wrote:
> Use lm-sensors. It runs localy and you can create
> a script that runs as a cron job that checks the
> output of lm-sensors and shutdown if you get high
> temps and stuff.
>
> http://packages.debian.org/lenny/lm-sensors

That was our first option, we just couldn't
believe no other tool or nobody else had implemented
it and shared.

Kind regards,
- --
Felipe Augusto van de Wiel (faw)
Debian. Freedom to code. Code to freedom!
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/

iEYEARECAAYFAkuq0rkACgkQCjAO0JDlykZMjACgshJEuvL16R khPzP6msIzwokF
Y1MAoI3bkKKb7k8NUuWdQywVWI5iIMpj
=cbqI
-----END PGP SIGNATURE-----


--
To UNSUBSCRIBE, email to debian-isp-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 4BAAD2BA.9080900@funlabs.org">http://lists.debian.org/4BAAD2BA.9080900@funlabs.org
 
Old 03-25-2010, 02:06 AM
"Felipe Augusto van de Wiel (faw)"
 
Default Monitoring server sensors and triggering actions

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On 24-03-2010 06:13, Gavin Westwood wrote:
> On 2010/3/24 Felipe Augusto van de Wiel wrote:
>> How do you shutdown a server if CPU hits
>> critical temperatures? Do you use a program? Do
>> you hack your own shell script?
>
> On 24/03/10 04:49, Eden Caldas replied:
>> Use lm-sensors. It runs localy and you
>> can create a script that runs as a cron job that checks the output of
>> lm-sensors and shutdown if you get high temps and stuff.
>
> Further to this, you might be interested in the following links:
>
> http://lists.lm-sensors.org/pipermail/lm-sensors/2009-May/025917.html
>
> http://cahbojonegoro.wordpress.com/2008/12/15/cpu-temperature-monitor-script/
>
> And, while not directly answering your question, this is a neat way to
> monitor the temps in the rack:
>
> http://www.hoppie.nl/tempsens/
>
> Hope that helps.

It helped a lot.

Thank you.

Kind regards,
- --
Felipe Augusto van de Wiel (faw)
Debian. Freedom to code. Code to freedom!
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/

iEYEARECAAYFAkuq0z8ACgkQCjAO0JDlykai2ACfUsv7lb7+7b 7F15tSlFTCnQio
/3IAn0Rf8oQq42yaGDLaGbD3yX/fNx6N
=yRay
-----END PGP SIGNATURE-----


--
To UNSUBSCRIBE, email to debian-isp-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: 4BAAD341.8050106@funlabs.org">http://lists.debian.org/4BAAD341.8050106@funlabs.org
 

Thread Tools




All times are GMT. The time now is 08:49 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org