FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > CentOS > CentOS

 
 
LinkBack Thread Tools
 
Old 06-22-2012, 05:17 PM
Steve Brooks
 
Default SATA errors in log

On Fri, 22 Jun 2012, m.roth@5-cent.us wrote:

> Hi, Steve,
>
> Steve Brooks wrote:
>> On Fri, 22 Jun 2012, Steve Brooks wrote:
>>> On Fri, 22 Jun 2012, m.roth@5-cent.us wrote:
>>>> Steve Brooks wrote:
>>>>> On Fri, 22 Jun 2012, m.roth@5-cent.us wrote:
>>>>>> Steve Brooks wrote:
>>>>>>> On Fri, 22 Jun 2012, m.roth@5-cent.us wrote:
>>>>>>>> Steve Brooks wrote:
>>>>>>>>>
>>>>>>>>> I have a SATA PCIe 6Gbps 4 port controller card made by Startech.
>>>>>>>>> The kernel (Linux viz1 2.6.32-220.4.1.el6.x86_64) sees it as
>>>>>>>>>
>>>>>>>>> Marvell Technology Group Ltd. 88SE9123
>>>>>>>>>
>>>> Is this your card?
>>>
>>> Yes that is the very card, the page says the chipset is Marvell 88SE9128
>>> but "lspci" shows
>>>
>>> Marvell Technology Group Ltd. 88SE9123 PCIe SATA 6.0 Gb/s controller
>>
>> It is odd because the kernel reports it as "88SE9123" the web page says it
>> is "88SE9128" as does the manual supplied with the card. Now the
>
> Yeah, I noticed that too, and thought it odd.
> <snip>
> I looked at the "manual", and the only thing that came to mind was to try
> going into the BIOS and making sure that it was set to AHCI rather than,
> say, IDE, or whatever.


Thanks Mark for the reply , I hadn't thought about the card posting drives
in the bios, I assumed only the onboard SATA devices would allow you
change the mode in the motherboard's BIOS. I will have a look on Monday to
see if anything has appeared in the BIOS. I guess the default mode in a
SATA6 card would be AHCI but yes worth a check.

Cheers,

Steve

_______________________________________________
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
 

Thread Tools




All times are GMT. The time now is 01:18 AM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright 2007 - 2008, www.linux-archive.org