FAQ Search Today's Posts Mark Forums Read
» Video Reviews

» Linux Archive

Linux-archive is a website aiming to archive linux email lists and to make them easily accessible for linux users/developers.


» Sponsor

» Partners

» Sponsor

Go Back   Linux Archive > CentOS > CentOS

 
 
LinkBack Thread Tools
 
Old 12-28-2007, 03:54 PM
"ArcosCom Linux User"
 
Default Problem with RTL-8110SC/8169SC Gigabit Ethernet

Hi guys;
I'm having a problem with a new pc that has an Realtec ethernet device.
Don't know why the driver is not loading and is not detected during
installation process.

I tried to load r8169.ko unsuccessfully. It load but no device is
detected. No dmesg or /var/log/message.

żAny help on how I can configure correctly this ethernet device?

This are the data that I have:

# lspci
00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller
Hub (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated
Graphics Controller (rev 02)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High
Definition Audio Controller (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI
Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC
Interface Bridge (rev 01)
00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA
IDE Controller (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller
(rev 01)
01:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8110SC/8169SC Gigabit Ethernet (rev 10)

More detailed:
01:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8110SC/8169SC Gigabit Ethernet (rev 10)
Subsystem: Giga-byte Technology Unknown device e000
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 10
I/O ports at a000 [size=256]
Memory at e1000000 (32-bit, non-prefetchable) [size=256]
[virtual] Expansion ROM at 20000000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2


_______________________________________________
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
 
Old 12-28-2007, 06:11 PM
"ArcosCom Linux User"
 
Default Problem with RTL-8110SC/8169SC Gigabit Ethernet

Hi guys;
I'm having a problem with a new pc that has an Realtec ethernet device.
Don't know why the driver is not loading and is not detected during
installation process.

I tried to load r8169.ko unsuccessfully. It load but no device is
detected. No dmesg or /var/log/message.

żAny help on how I can configure correctly this ethernet device?

This are the data that I have:

# lspci
00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller
Hub (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated
Graphics Controller (rev 02)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High
Definition Audio Controller (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI
Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC
Interface Bridge (rev 01)
00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA
IDE Controller (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller
(rev 01)
01:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8110SC/8169SC Gigabit Ethernet (rev 10)

More detailed:
01:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8110SC/8169SC Gigabit Ethernet (rev 10)
Subsystem: Giga-byte Technology Unknown device e000
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 10
I/O ports at a000 [size=256]
Memory at e1000000 (32-bit, non-prefetchable) [size=256]
[virtual] Expansion ROM at 20000000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2

_______________________________________________
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
 
Old 12-29-2007, 03:41 PM
Simen Timian Thoresen
 
Default Problem with RTL-8110SC/8169SC Gigabit Ethernet

ArcosCom Linux User wrote:

Hi guys;
I'm having a problem with a new pc that has an Realtec ethernet device.
Don't know why the driver is not loading and is not detected during
installation process.

I tried to load r8169.ko unsuccessfully. It load but no device is
detected. No dmesg or /var/log/message.

żAny help on how I can configure correctly this ethernet device?


Hi ArcosCom,

We have a few boxes with this chip (running CentOS4,i386), and I'm sorry
to say that this NIC is not supported out of the box by the included
drivers.


We've got it running by using the 'r1000' driver, which seems to be
Realteks own driver. I'll be happy to make the archive we have (v1.05)
available to you if you don't find a more recent version on your own.


Yours,
-S


This are the data that I have:

# lspci
00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller
Hub (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated
Graphics Controller (rev 02)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High
Definition Audio Controller (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI
Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC
Interface Bridge (rev 01)
00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA
IDE Controller (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller
(rev 01)
01:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8110SC/8169SC Gigabit Ethernet (rev 10)

More detailed:
01:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8110SC/8169SC Gigabit Ethernet (rev 10)
Subsystem: Giga-byte Technology Unknown device e000
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 10
I/O ports at a000 [size=256]
Memory at e1000000 (32-bit, non-prefetchable) [size=256]
[virtual] Expansion ROM at 20000000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2


_______________________________________________
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos




--
Simen Thoresen, Dolphin ICS
Systems Administration and Wulfkit Support

_______________________________________________
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
 
Old 12-29-2007, 03:46 PM
fred smith
 
Default Problem with RTL-8110SC/8169SC Gigabit Ethernet

On Fri, Dec 28, 2007 at 05:54:02PM +0100, ArcosCom Linux User wrote:
> Hi guys;
> I'm having a problem with a new pc that has an Realtec ethernet device.
> Don't know why the driver is not loading and is not detected during
> installation process.
>
> I tried to load r8169.ko unsuccessfully. It load but no device is
> detected. No dmesg or /var/log/message.

On my (older) Gigabyte board with a Realtek 8169 chip I see this in
"lspci -v":

01:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)
Subsystem: Giga-byte Technology GA-8I915ME-G Mainboard
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 209
I/O ports at 9400 [size=256]
Memory at e7000000 (32-bit, non-prefetchable) [size=256]
[virtual] Expansion ROM at 50020000 [disabled] [size=64K]
Capabilities: [dc] Power Management version 2

and "lspci -vv" shows this:

01:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)
Subsystem: Giga-byte Technology GA-8I915ME-G Mainboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 209
Region 0: I/O ports at 9400 [size=256]
Region 1: Memory at e7000000 (32-bit, non-prefetchable) [size=256]
[virtual] Expansion ROM at 50020000 [disabled] [size=64K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

I note that mine does NOT list it (as yours does) as "RTL-8110SC/8169SC",
but rather as "RTL-8169", so it may not be the identical chip.

I don't have any gigabit networking in the house, but it works fine (and
always has) at 10 or 100 (I've done both, currently 100).

BTW, I'm using Centos 5 fully updated.

>
> żAny help on how I can configure correctly this ethernet device?
>
> This are the data that I have:
>
> # lspci
> 00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller
> Hub (rev 02)
> 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated
> Graphics Controller (rev 02)
> 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High
> Definition Audio Controller (rev 01)
> 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
> Controller #1 (rev 01)
> 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
> Controller #2 (rev 01)
> 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
> Controller #3 (rev 01)
> 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
> Controller #4 (rev 01)
> 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI
> Controller (rev 01)
> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
> 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC
> Interface Bridge (rev 01)
> 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA
> IDE Controller (rev 01)
> 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller
> (rev 01)
> 01:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
> RTL-8110SC/8169SC Gigabit Ethernet (rev 10)
>
> More detailed:
> 01:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
> RTL-8110SC/8169SC Gigabit Ethernet (rev 10)
> Subsystem: Giga-byte Technology Unknown device e000
> Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 10
> I/O ports at a000 [size=256]
> Memory at e1000000 (32-bit, non-prefetchable) [size=256]
> [virtual] Expansion ROM at 20000000 [disabled] [size=128K]
> Capabilities: [dc] Power Management version 2
>
>
> _______________________________________________
> CentOS mailing list
> CentOS@centos.org
> http://lists.centos.org/mailman/listinfo/centos

--
-------------------------------------------------------------------------------
.---- Fred Smith /
( /__ ,__. __ __ / __ : /
/ / / /__) / / /__) .+' Home: fredex@fcshome.stoneham.ma.us
/ / (__ (___ (__(_ (___ / :__ 781-438-5471
-------------------------------- Jude 1:24,25 ---------------------------------
_______________________________________________
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
 
Old 12-29-2007, 04:12 PM
Fabian Arrotin
 
Default Problem with RTL-8110SC/8169SC Gigabit Ethernet

On Fri, 2007-12-28 at 17:54 +0100, ArcosCom Linux User wrote:
> Hi guys;
> I'm having a problem with a new pc that has an Realtec ethernet device.
> Don't know why the driver is not loading and is not detected during
> installation process.
>
> I tried to load r8169.ko unsuccessfully. It load but no device is
> detected. No dmesg or /var/log/message.
>
> żAny help on how I can configure correctly this ethernet device?

Have you tested with the driver disk provided here :
http://wiki.centos.org/HardwareList/CentOS5/RealTek/r1000 ?

--
Fabian Arrotin <fabian.arrotin@arrfab.net>
Solution ?
echo '16i[q]sa[ln0=aln100%Pln100/snlbx]sbA0D4D465452snlbxq' | dc
_______________________________________________
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
 
Old 12-30-2007, 10:21 AM
"ArcosCom Linux User"
 
Default Problem with RTL-8110SC/8169SC Gigabit Ethernet

Thanks to all.

I tried this:

http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=13&PFid=4&Level=5 &Conn=4&DownTypeID=3&GetDown=false&Downloads=tr ue

And works now.

Regards

El Vie, 28 de Diciembre de 2007, 17:54, ArcosCom Linux User escribió:
> Hi guys;
> I'm having a problem with a new pc that has an Realtec ethernet device.
> Don't know why the driver is not loading and is not detected during
> installation process.
>
> I tried to load r8169.ko unsuccessfully. It load but no device is
> detected. No dmesg or /var/log/message.
>
> żAny help on how I can configure correctly this ethernet device?
>
> This are the data that I have:
>
> # lspci
> 00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller
> Hub (rev 02)
> 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated
> Graphics Controller (rev 02)
> 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High
> Definition Audio Controller (rev 01)
> 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
> Controller #1 (rev 01)
> 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
> Controller #2 (rev 01)
> 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
> Controller #3 (rev 01)
> 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
> Controller #4 (rev 01)
> 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI
> Controller (rev 01)
> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
> 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC
> Interface Bridge (rev 01)
> 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA
> IDE Controller (rev 01)
> 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller
> (rev 01)
> 01:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
> RTL-8110SC/8169SC Gigabit Ethernet (rev 10)
>
> More detailed:
> 01:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
> RTL-8110SC/8169SC Gigabit Ethernet (rev 10)
> Subsystem: Giga-byte Technology Unknown device e000
> Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 10
> I/O ports at a000 [size=256]
> Memory at e1000000 (32-bit, non-prefetchable) [size=256]
> [virtual] Expansion ROM at 20000000 [disabled] [size=128K]
> Capabilities: [dc] Power Management version 2
>
>
> _______________________________________________
> CentOS mailing list
> CentOS@centos.org
> http://lists.centos.org/mailman/listinfo/centos
>


_______________________________________________
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
 

Thread Tools




All times are GMT. The time now is 04:12 PM.

VBulletin, Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2007, Crawlability, Inc.
Copyright ©2007 - 2008, www.linux-archive.org