lmsensors sensors.conf file for gigabyte GA7N400 Pro2
Having done my fresh 5.0 install a couple months ago I'm slowly getting
things back in to working condition. Decided last night to try setting up
Got it all set up (modules, etc taken care of) and it runs and reports
values, but some of 'em a clearly wrong with the default sensors.conf
Trying to use the old sensors.conf I used on Centos 4 produces even more
whacked-out results, so I guess that's not the solution.
Perusing the documentation, it seems that one can configure it properly
only if one knows a lot more about the hardware than one typically knows.
So, I'm wondering if anyone out there has a working config file for a
Gigabyte GA-7N400 Pro2 motherboard that works on Centos 5.1?
here's what I get with it as it stands right now:
Adapter: ISA adapter
VCore 1: +1.68 V (min = +1.42 V, max = +1.57 V) ALARM
VCore 2: +2.54 V (min = +2.40 V, max = +2.61 V)
+3.3V: +3.23 V (min = +3.14 V, max = +3.47 V)
+5V: +4.99 V (min = +4.74 V, max = +5.25 V)
+12V: +11.90 V (min = +11.39 V, max = +12.61 V)
-12V: -15.70 V (min = -12.63 V, max = -11.41 V) ALARM
-5V: -8.10 V (min = -5.26 V, max = -4.77 V) ALARM
Stdby: +4.57 V (min = +4.76 V, max = +5.24 V) ALARM
VBat: +4.08 V
fan1: 2556 RPM (min = 0 RPM, div = 8)
fan2: 2083 RPM (min = 3013 RPM, div = 8) ALARM
fan3: 1591 RPM (min = 3013 RPM, div = 8) ALARM
M/B Temp: +30°C (low = +15°C, high = +40°C) sensor = thermistor
CPU Temp: +26°C (low = +15°C, high = +45°C) sensor = thermistor
Temp3: +57°C (low = +15°C, high = +45°C) sensor = diode
That -12v at -15.70 is pretty obviously wrong, as is the -5 at -8.10, and
the other voltages getting ALARMs are probably wrong too, though not by
The MB and CPU temps shown by the BIOS are 29 and 53, so that 26 shown as
CPU temp here is likely bogus. One wonders if the Temp3 is actually the
CPU temp instead. (my old config used Temp2 for that, tho).