- might_sleep warning in multipath_dtr
- Fixes to EMC scsi device handler
- PROBLEM: powertop reports 8000 spurious interrupts/s from USB disk
- PROBLEM: powertop reports 8000 spurious interrupts/s from USB disk
- oops in linear_mergeable_bvec
- removing "active" variable in snapshots
- scsi_dh: Use SCSI device handler in dm-multipath
- Different Path priorities for iSCSI and FC paths toa combination lun.
- scsi_dh: Remove dm_pg_init_complete
- scsi_dh: Add a single threaded workqueue for initializing paths
- scsi_dh: Do not allow arguments for hardware handlers
- scsi_dh: add infrastructure for SCSI Device Handlers
- Don't print failure messages for callouts by default
- SUSE resync
- Make modules directory configurable
- Fixup Makefiles
- Remove DAEMON defines
- Define LIBDM_API_FLUSH for 64bit systems correctly
- Add cciss_tur checker
- Update hardware table
- Don't print failure messages for callouts by default
- Improve sense code scanning in sg_read() and tur checker
- libdevmapper prints garbage on shutdown
- Fixup varags usage
- Use 'mpatha' for user_friendly_names option
- multipathd crash on shutdown
- block SIGPIPE before writing to a pipe
- switch DM tables to readonly automatically
- switch DM tables to readonly automatically
- Different Path priorities for iSCSI and FC paths to a combination lun.
- Different Path priorities for iSCSI and FC paths to a combination lun.
- /dev/sdd fails fsck on bootup
- scsi_dh: Use SCSI device handler in dm-multipath
- make dm_dirty_log_{init,exit}() static
- freeze feature ver 1.2
- dm-ioband: I/O bandwidth controller v0.0.4: Document
- block: no need to initialize rq->cmd with blk_get_request
- switch DM tables to readonly automatically
- device-mapper update for 2.6.26
- How to install Raid 5 on MCP55
- Utility tool for dm-ioband.
- dm-ioband: I/O bandwidth controller v0.0.4: Document
- dm-ioband: I/O bandwidth controller v0.0.4: Source code and patch
- dm-ioband: I/O bandwidth controller v0.0.4: Introduction
- a few setup/control questions
- I/O context inheritance
- map in use
- 10-times slower dm-raid1 O_SYNC
- device-mapper ./WHATS_NEW dmsetup/dmsetup.c
- device-mapper ./WHATS_NEW lib/.exported_symbol ...
- minor dm.c cleanup
- path checker open() flags, devmapper ioctl()
- bdev size not updated correctly after underlying device is resized
- bdev size not updated correctly after underlying device is resized
- Scaling with 4 NICs and Multibus
- multipath-tools changes upstream
- multipath-tools/libmultipath discovery.c
- block: no need to initialize rq->cmd with blk_get_request
- ioband pebcak again, I'm sure.
- ioband pebcak again, I'm sure.
- dm-mpath: remove hwhcontext from dm_path
- dm-mpath: move is_active to pgpath from dm_path
- dm: move dm_path to include/linux/device-mapper.h
- Remove path-selector's dependency to dm-mpath
- bdev size not updated correctly after underlying device is resized
- Integration with SNMP?
- Submitting Multipath Device Defintions
- dm: dm_table_unplug_all optimization
- lun paths status
- Data corruption on software RAID
- bio too big device md0 (248 > 240) - lvm on top of raid1
- dm-ioband = smarter than me
- multipath-tools Multipath-usage.txt
- Desynchronizing dm-raid1
- w/o attachments Need some help - i/o errors HDS-USP/Qlogic/RHEL5. 1/
- Timeouts in a case of a path failure.
- dmraid ./CHANGELOG ./KNOWN_BUGS ./README ./dmr ...
- dm: raid1 block-on-error patch
- scsi_dh: Remove hardware handler infrastructure from dm
- scsi_dh: Remove hardware handlers from dm
- scsi_dh: Use SCSI device handler in dm-multipath
- scsi_dh: add EMC Clariion device handler
- scsi_dh: add hp sw device handler
- scsi_dh: add lsi rdac device handler
- scsi_dh: Move hardware handlers from dm to SCSI
- Remove XFS specific ioctl interfaces for freeze feature
- freeze feature ver 1.1
- dm snapshot: Add snapshot merging code
- dm snapshot: Track snapshot-merged writes
- dm snapshot: Add basic version of snapshot-merged target
- dm snapshot: Make origin_write() bio arg optional
- dm snapshot: Make find_pending_exception() not take a bio
- dm snapshot: Split up origin_resume()
- dm snapshot: Split snapshot constructor
- dm snapshot: Add exception store methods for merging
- dm snapshot: Track snapshot reads
- dm snapshot: Fix the fraction full percentage
- Snapshot merging back from the dead?
- Fedora 10 theme ideas
- proper extern for mdp_major
- drivers/md/dm-table.c: fix void returns
- make dm_set_device_limits() static
- remove dm_create_error_table()
- make dm_{, un}register_dirty_log_type() static
- RAID5 compatibility.
- Using different configuration for arrays with identicalvendor/product
- Using different configuration for arrays with identical vendor/product
- Add timeout feature
- Implement generic freeze feature
- dm io: write error bits form long not int
- dm crypt: fix ctx pending
- multipath-tools: fix freeing log verbosity config before use
- Internal device-mapper public interface: dm-kcopyd.h
- Internal device-mapper public interface: dm-io.h
- Internal device-mapper public interface: dm-dirty-log.h
- Internal device-mapper public interface: device-mapper.h
- Internal device-mapper public interface
- sync code with RHEL 4.7
- Task blocked for more than 120 seconds
- Installing RHEL with single controller
- DEVICE-MAPPER: Use shorter list_splice_init() for brevity.
- Policy for using dm-multipather with SELinux enforced
- multipath: update discovery for sysfs layout changes
- multipath: update sysfs code
- block: add request submission interface
- block: add request update interface
- INFO: task mount:11202 blocked for more than 120 seconds
- INFO: task mount:11202 blocked for more than 120 seconds
- INFO: task mount:11202 blocked for more than 120 seconds
- 2.6.25-rc hangs
- INFO: task mount:11202 blocked for more than 120 seconds
- freeze feature ver 1.0
- An alternative interface to device mapper
- block: add rq->complete_io hook for request stacking
- dm co tidy local_init
- dm co remove dead codes
- dm-mpath: convert to request-based
- dm-mpath: add hw-handler interface
- dm: reject bad table load
- dm: enable request-based dm
- dm: add core functions
- dm: add target interfaces
- dm: add memory pool
- dm: tidy local_init
- dm: remove dead codes
- block: export blk_end_io
- block: export blk_register_queue
- block: add request submission interface
- block: don't call __end_that_request_first() for clone
- block: lld busy status exporting interface
- block: move internal request completion to kblockd
- block: add rq->complete_io hook for request stacking
- request stacking and request-based dm-multipath
- multipath errors on first set-up
- Remove some legacy stuff that's no longer relevant from .discinfo/.treeinfo
- device-mapper ./WHATS_NEW dmeventd/old/dmevent ...
- Implement barrier support for single device DM devices
- Implement barrier support for single device DM devices
- Implement barrier support for single device DM devices
- dm-userspace
- Remove redundant if-before-free tests.
- Remove redundant if-before-free tests.
- Multipath-tools not seeing replaced RAID controller
- Activation with missing device
- dm-io operations on LVs
- How to Resize Partition
- Probably broken device mapper in latest vanilla kernel
- Activate/rebuilding with broken disk
- Document queue_if_no_path behavior
- device-mapper update for 2.6.25
- multipath-tools/path_priority pp_alua/Makefile ...
- no INQUIRY from userspace please
- scsi_dh: Add support for SDEV_PASSIVE)
- Multipath and getuid_callout issues with HPXP1024disk array
- Crash in dm-mod RHEL5,
- problem cloning multipath-tools.git
- Multipath and getuid_callout issues withHPXP1024diskarray
- multipath: Add compability 'command' prio handler
- blk_end_request: full I/O completion handler
- dm-ioband v0.0.3: The I/O bandwidth controller: Document
- dm-ioband v0.0.3: The I/O bandwidth controller: Source code patch
- dm-ioband v0.0.3: The I/O bandwidth controller: Introduction
- Multipath and getuid_callout issues with HPXP1024diskarray
- Withdrawal of Fedora Theme contest
- > You may find that you need to update your lvm userspace tools.
- > You may find that you need to update your lvm userspace tools.
- SLES installation on dual controller subsystem
- SLES installation on dual controller subsystem
- scsi_dh: Add support for SDEV_PASSIVE
- > Please do (at a minimum)
- Fwd: Hello, Andrew! Short question: Recently I've tried 2.6.24-git11 ...
- HPDMmultipath-tools-3.0.0.xxx with HP XP12000 diskarray
- Both 2.6.24-mm1 and 2.6.24-git11 do NOT "see" any of mine LVM-2 disks
- scsi_dh: scsi handling of REQ_LB_OP_TRANSITION
- scsi_dh: add skeleton for SCSI Device Handlers
- multipath: Add compability 'command' prio handler
- Multipath not rebuilding correctly on reboot
- Multipath and getuid_callout issueswithHPXP1024diskarray
- Multipath and getuid_callout issueswithHPXP1024disk array
- remove device mapper max_sectors restriction
- multipath multibus performance
- dm-band: The I/O bandwidth controller: Performance Report
- Multipath Usage Guide available at LVM wiki page
- Maps not created for read-only devices
- multiple paths question
- device-mapper ./WHATS_NEW lib/libdm-report.c
- help with hds DF500F
- Need Help
- Packages for DMRAID Eventing posted to Redhat wiki page
- multipath.conf template for Storagetek 6540
- A SCSI fault injection framework using SystemTap.
- The kernel thread for md RAID1 could cause a md RAID1 array deadlock
- A SCSI fault injection framework using SystemTap.
- possible snapshot corruption after system crash with bad timing
- multipath-tools multipath.conf.annotated
- multipath-tools: fix wrong annotation about default value
- can I create static /dev/dm-XY device mappings?
- dm: raid1 master device selection support
- fast file mapping for loop
- Adaptec HostRAID ddf1 on Supermicro X7DBR-i+
- Use device mapper to redirect to cache server?
- multipath-tools multipath.conf.annotated multi ...
- boot from san & lvm
- possible snapshot corruption after system crash with bad timing
- multipath tool 4.8 and RH 5.0
- multipath tool 4.8 and RH 5.0
- Using dmsetup suspend / resume
- multipath-tools ./multipath.conf.defaults libm ...
- anyone using this setup without issues
- NULL pointer issue in dm-mpath.c
- configuration mismatches on multipath.conf
- multipath-tools/libmultipath hwtable.c
- multipath-tools/multipath multipath.conf.redhat
- device mapper configurations
- device-mapper/man dmsetup.8
- max number of DM devices?
- Snapshots
- Configuring multipath for root device
- multipath-tools libmultipath/config.c libmulti ...
- device-mapper ./WHATS_NEW lib/libdm-common.c l ...
- device-mapper ./WHATS_NEW lib/libdm-deptree.c
- device-errors and multipath device access issue
- dm crypt: use bio_add_page
- dm: merge max_hw_sector
- dm: trigger change uevent on rename
- dm crypt: fix write endio
- dm mpath: hp requires scsi
- dm: table detect io beyond device
- device-mapper fixes for 2.6.24-rc*
- blk_end_request: changing ide-scsi (take 4)