I installed a SATA HDD.
Installed Suse 11.0 on that HDD and run Suse 11.0's Jack.
Disabled and enabled the old IDE HDD and the new SATA HDD in the BIOS.
Copied data and 64 Studio from the old IDE HDD to the new SATA HDD by
Suse 11.0 and Gadmin-Rsync, but I didn't change anything for 64 Studio,
excepted the fstab for the copied version.
Jack for Suse 11.0 is still fine.
Jack for the copied 64 Studio isn't fine.
Jack for the original 64 Studio ISN'T fine ANY MORE.
Audio is fine for You Tube. No sound server or daemon like arts is running.
"12:02:14.305 Patchbay deactivated.
12:02:14.348 Statistics reset.
12:02:14.419 ALSA connection graph change.
12:02:18.541 ALSA connection change.
12:02:30.788 Startup script...
12:02:30.789 artsshell -q terminate
12:02:31.305 Startup script terminated with exit status=256.
12:02:31.306 JACK is starting...
12:02:31.307 /usr/bin/killall artsd & /usr/bin/jackd -R -dalsa -r44100
-p1024 -n2 -D -Chw:0 -Phw:0
12:02:31.321 JACK was started with PID=3987.
R: unknown signal; killall -l lists signals.
12:02:31.324 JACK was stopped with exit status=1.
12:02:31.324 Post-shutdown script...
12:02:31.324 killall jackd
jackd: no process killed
12:02:31.733 Post-shutdown script terminated with exit status=256.
12:02:33.353 Could not connect to JACK server as client. - Overall
operation failed. - Unable to connect to server. Please check the
messages window for more info."
The terminal's message:
Warning: no locale found: /usr/share/locale/qjackctl_en_US.qm
Devices are like they where before, when Jack was fine. TerraTec hw:0,
USB-MIDI hw:2, no other audio devices.
What might be wrong now? Troubles because any interrupt might has changed?
64studio:/home/spinymouse# hwinfo --sound
30: PCI 306.0: 0401 Multimedia audio controller
[Created at pci.296]
Unique ID: Kaa7.J4wu6rKmng4
Parent ID: qscc.ULOo3yhA66C
SysFS ID: /devices/pci0000:00/0000:00:14.4/0000:03:06.0
SysFS BusID: 0000:03:06.0
Hardware Class: sound
Model: "TERRATEC EWX 24/96"
Vendor: pci 0x1412 "VIA Technologies Inc."
Device: pci 0x1712 "ICE1712 [Envy24] PCI Multi-Channel I/O Controller"
SubVendor: pci 0x153b "TERRATEC Electronic GmbH"
SubDevice: pci 0x1130 "EWX 24/96"
Driver Modules: "snd_ice1712"
I/O Ports: 0xcf00-0xcf1f (rw)
I/O Ports: 0xce00-0xce0f (rw)
I/O Ports: 0xcd00-0xcd0f (rw)
I/O Ports: 0xcc00-0xcc3f (rw)
IRQ: 21 (12038 events)
Module Alias: "pci:v00001412d00001712sv0000153Bsd00001130bc04sc0 1i00"
Driver Info #0:
Driver Status: snd_ice1712 is active
Driver Activation Cmd: "modprobe snd_ice1712"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #23 (PCI bridge)
The IRQ for the TerraTec is still the same, that interrupt didn't change.
Don't care about the patchbay, it's just because there is missing a
snapshot like before, when Jack was fine. I got this error "Could not
load patchbay definition file: "/home/spinymouse/New Folder/test.xml""
before, when Jack was fine.
It's not only that I didn't make any changes for 64 Studio, I also
didn't run 64 Studio, because I was running the new Suse 11.0. Because
You Tube's audio is fine with Iceweasel, there seems to be no troubles
Why is'n Jack fine any more for 64 Studio, without making any changes,
even without running 64 Studio? Any ideas?
I thought after spending a lot of money and time for Linux and having a
stable 64 Studio, I could make music, but now without changing 64
Studio, it's unstable.
64studio-users mailing list