Hello, once again! Last time for today!

The mdadm-script in init.d says:

"Starting MD monitoring service: mdadm --monitor
mdadm: only give one device per ARRAY line: /dev/md0 and /dev/sda1
mdadm: only give one device per ARRAY line: /dev/md1 and /dev/sda2"

What does that mean? Is something wrong? My mdadm.conf looks like:

-------------------------
# mdadm.conf
#
# Please refer to mdadm.conf(5) for information about this file.
#

# by default, scan all partitions (/proc/partitions) for MD superblocks.
# alternatively, specify devices to scan, using wildcards if desired.
# configured by mitsch:
DEVICE /dev/sda* /dev/sdb*
ARRAY /dev/md0 level=raid1 num-devices=2
uuid=8bf72740:442ac571:1601d2a4:5ce879cf devices=/dev/sdb1 /dev/sda1
ARRAY /dev/md1 level=raid1 num-devices=2
uuid=51a5e163:b3a5c295:0cd624d5:266f22eb devices=/dev/sdb2 /dev/sda2

# auto-create devices with Debian standard permissions
CREATE owner=root group=disk mode=0660 auto=yes

# automatically tag new arrays as belonging to the local system
HOMEHOST <system>

# instruct the monitoring daemon where to send mail alerts
MAILADDR root

# This file was auto-generated on Mon, 16 Jun 2008 22:44:54 +0000
# by mkconf $Id: mkconf 261 2006-11-09 13:32:35Z madduck $
-------------------------

Any help appreciated! Thanks a lot!
And thanks for that cool distro! I like it!

Mitsch

_______________________________________________
64studio-users mailing list
64studio-users@64studio.com
http://lists.64studio.com/mailman/listinfo/64studio-users